Numerical and Experimental Study of Backward-Radial Extrusion Process for Flanged Brass Alloy C26000 Parts
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metallurgy and Material Forming · Metallurgy and Material Science · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. w peng, C. Wei, J. Yang, X. Chen, B. Qi, X. Li, J. Sun, and D. Zhang, Rolling Schedule Design for the ESP Rolling Process Based on NSGA-II-DE, ISA Trans., 2025, 158, p 427–441. https://doi.org/10.1016/j.isatra.2024.12.04710.1016/j.isatra.2024.12.047 ↗
2. V. Modanloo, V. Alimirzaloo, and M. Elyasi, Optimal Design of Stamping Process for Fabrication of Titanium Bipolar Plates Using the Integration of Finite Element and Response Surface Methods, Arab. J. Sci. Eng., 2020, 45, p 1097–11017.10.1007/s13369-019-04232-8 ↗
3. Z. Zhang, L. Wan, Q. Wen, Y. Shi, and Z. Feng, Wire-Based Friction Stir Additive Manufacturing of TiC Reinforced Al-Cu-Mg Composite: Particle Refinement and Dispersion, Compos. Part A Appl. Sci. Manuf., 2025, 196, p 109009. https://doi.org/10.1016/j.compositesa.2025.10900910.1016/j.compositesa.2025.109009 ↗
4. W. Dong, X. Meng, Y. Xie, Z. Zhang, H. Tian, X. Sun, J. Li, and Y. Huang, Wire-Based Friction Stir Welding Enables Equal-Strength Joining of Aluminum Alloys Even with Assembling Gaps, J. Manuf. Process., 2025, 151, p 426–433. https://doi.org/10.1016/j.jmapro.2025.07.05010.1016/j.jmapro.2025.07.050 ↗
5. V. Shatermashhadi, B. Manafi, K. Abrinia, G. Faraji, and M. Sanei, Development of a Novel Method for the Backward Extrusion, Mater. Des., 2014, 62, p 361–366. https://doi.org/10.1016/j.matdes.2014.05.02210.1016/j.matdes.2014.05.022 ↗
6. V. Marko, L. Lihui, A. Sergei, V. Dragisa et al., Severe Plastic Deformation-Key Features, Methods and Application, Mater. Sci. Forum, 2020, 1003, p 31–36. https://doi.org/10.4028/www.scientific.net/MSF.1003.3110.4028/www.scientific.net/MSF.1003.31 ↗
7. T.C. Lowe and R.Z. Valiev, The Use of Severe Plastic Deformation Techniques in Grain Refinement, JOM, 2004, 56, p 64–68. https://doi.org/10.1007/s11837-004-0295-z10.1007/s11837-004-0295-z ↗
8. Y. Estrin and A. Vinogradov, Extreme Grain Refinement by Severe Plastic Deformation: A Wealth of Challenging Science, Acta Mater., 2013, 61(3), p 782–817. https://doi.org/10.1016/j.actamat.2012.10.03810.1016/j.actamat.2012.10.038 ↗
9. X. Tian, Y. Zhao, T. Gu, Y. Guo, F. Xu, and H. Hou, Cooperative Effect of Strength and Ductility Processed by Thermomechanical Treatment for Cu–Al–Ni Alloy, Mater. Sci. Eng. A, 2022, 849, p 143485. https://doi.org/10.1016/j.msea.2022.14348510.1016/j.msea.2022.143485 ↗
10. L. Harishchandra, K. Leo, and V. Patricia, A Novel Method for Severe Plastic Deformation at High Strain Rate, EPJ Web Conf., 2018, 183, p 03008. https://doi.org/10.1051/epjconf/20181830300810.1051/epjconf/201818303008 ↗
11. S. Kalpakjian and S. Schmid, Manufacturing Engineering and Technology, 6th ed. Prentice Hall, Upper Saddle River, 2010. (ISBN: 9810681445, 9789810681449)
12. J.A. Pale, S. Rajiv, and T. Altan, Development of Equipment and Capabilities for Investigation of the Multi-action Forming of Complex Parts, J. Mater. Process. Technol., 1992, 32(1–2), p 1–29. https://doi.org/10.1016/0924-0136(92)90309-G10.1016/0924-0136(92)90309-G ↗
13. F.C. Lin and S.Y. Lin, Radius Ratio Estimation and Fold Situation Prediction of the Deformation Profile in Forging–Extrusion Process, Comput. Struct., 2002, 80(24), p 1817–1826. https://doi.org/10.1016/S0045-7949(02)00220-110.1016/S0045-7949(02)00220-1 ↗
14. H.J. Choi, J.H. Choi, and B.B. Hwang, The Forming Characteristics of Radial–Backward Extrusion, J. Mater. Process. Technol., 2001, 113(1), p 141–147. https://doi.org/10.1016/S0924-0136(01)00703-810.1016/S0924-0136(01)00703-8 ↗
15. A. Buschhausen, K. Weinmann, J.Y. Lee, and T. Altan, Evaluation of Lubrication and Friction in Cold Forging Using a Double Backward-Extrusion Process, J. Mater. Process. Technol., 1992, 33(1–2), p 95–108.10.1016/0924-0136(92)90313-H ↗
16. J.H. Shim, J.H. Ok, H.J. Choi, H.S. Koo, and B.B. Hwang, A Process Sequence Design of Multi-step Cold Extrusion Process for Hollow Parts, Mater. Sci. Forum, 2005, 15(475), p 4195–4198.10.4028/www.scientific.net/MSF.475-479.4195 ↗
17. F. Fereshteh-Saniee, N. Fakhar, and M. Karimi, Experimental, Analytical, and Numerical Studies on the Forward Extrusion Process, Mater. Manuf. Process., 2013, 28(3), p 265–270. https://doi.org/10.1080/10426914.2012.68945410.1080/10426914.2012.689454 ↗
18. S.A. Mousavi, S.R. Bahadori, and A.R. Shahab, Numerical and Experimental Studies of the Plastic Strains Distribution Using Subsequent Direct Extrusion After Three Twist Extrusion Passes, Mater. Sci. Eng. A, 2010, 527(16–17), p 3967–3974. https://doi.org/10.1016/j.msea.2010.02.07710.1016/j.msea.2010.02.077 ↗
19. B.P.P.A. Gouveia, J.M.C. Rodrigues, N. Bay, and P.A.F. Martins, Deformation Analysis of the Round-to-Square Extrusion: A Numerical and Experimental Investigation, Fin ele in ana and des, 2000, 35(3), p 269–282. https://doi.org/10.1016/S0168-874X(99)00070-010.1016/S0168-874X(99)00070-0 ↗
20. H.Y. Cho, G.S. Min, C.Y. Jo, and M.H. Kim, Process Design of the Cold Forging of a Billet by Forward and Extrusion, J. Mater. Process. Technol., 2003, 135(2), p 375–381. https://doi.org/10.1016/S0924-0136(02)00870-110.1016/S0924-0136(02)00870-1 ↗
21. H. Jafarzadeh, S. Barzegar, and A. Babaei, Analysis of Deformation Behavior in Backward–Radial–Forward Extrusion Process, Trans. Indian Inst. Metals, 2015, 68(2), p 191–199.10.1007/s12666-014-0441-4 ↗
22. H. Jafarzadeh, M. Zadshakoyan, and E. Abdi Sobbouhi, Numerical Studies of Some Important Design Factors in Radial-Forward Extrusion Process, Mater. Manuf. Process., 2010, 25(8), p 857–863.10.1080/10426910903536741 ↗
23. A. Farhoumand and R. Ebrahimi, Analysis of Forward–Backward-Radial Extrusion Process, Mater. Des., 2009, 30(6), p 2152–2157.10.1016/j.matdes.2008.08.025 ↗
24. C. Liang, Z. Guoqun, Y. Junquan, Z. Wendong, and W. Tao, Analysis and Porthole Die Design for a Multi-hole Extrusion Process of a Hollow, Thin-Walled Aluminum Profile, Int. J. Adv. Manuf. Technol., 2014, 74, p 383–392. https://doi.org/10.1007/s00170-014-6003-410.1007/s00170-014-6003-4 ↗
25. J. Lof and Y. Blokhuis, FEM Simulations of the Extrusions of Complexed Thin-Walled Aluminum Sections, J. Mater. Process. Technol., 2002, 122, p 344–354. https://doi.org/10.6100/IR52712110.6100/IR527121 ↗
26. C.Y. Wu and Y.C. Hsu, Optimal Shape Design of an Extrusion Die Using Polynomial Networks and Genetic Algorithms, Int. J. Adv. Manuf. Technol., 2002, 19, p 79–87. https://doi.org/10.1007/s00170020000010.1007/s001700200000 ↗
27. H.H. Jo, S.K. Lee, C.S. Jung, and B.M. Kim, A Non-steady State FE Analysis of Al Tubes Hot Extrusion by a Porthole Die, J. Mater. Process. Technol., 2006, 173, p 223–231.10.1016/j.jmatprotec.2005.03.039 ↗
28. H. Chen, G. Zhao, C. Zhang, Y. Guan, H. Liu, and F. Kou, Numerical Simulation of Extrusion Process and Die Structure Optimization for a Complex Aluminum Multicavity Wallboard of High-Speed Train, Mater. Manuf. Process., 2011, 26, p 1530–1538. https://doi.org/10.1080/10426914.2011.55195010.1080/10426914.2011.551950 ↗
29. F. Li, J.F. Lin, J. Yuan, and X.J. Liu, Effect of Inner Cone Punch on Metal Flow in Extrusion Process, Int. J. Adv. Manuf. Technol., 2009, 42, p 489–496. https://doi.org/10.1007/s00170-008-1806-910.1007/s00170-008-1806-9 ↗
30. C.S. Zhang, G.Q. Zhao, H. Chen, Y.J. Guan, and F.J. Kou, Numerical Simulation and Metal Flow Analysis of Hot Extrusion Process for a Complex Hollow Aluminum Profile, Int. J. Adv. Manuf. Technol., 2012, 60, p 101–110.10.1007/s00170-011-3609-7 ↗
31. Handbook, Metallography and Microstructures, Vol 9 ASM International, Metals Park, OH, 1985.
32. A.O. Adegbenjo, A.A. Adegbola, F.O. Raji, O.A. Ladiipo, T.B. Adeboje, and S.A. Ibitoye, Combined Effects of Silicon (Si) and Low Temperature Annealing on the Tensile Properties of Cartridge (70/30) Brass with Nickel (Ni) and Iron (Fe) Contaminants, TMS (The Minerals, Metals & Materials Society), Pittsburgh, 2015, p 175–180. https://doi.org/10.1002/9781119093503.ch2110.1002/9781119093503.ch21 ↗
33. Schuler GmbH, Metal Forming Handbook, Springer, Berlin, 1998.10.1007/978-3-642-58857-0 ↗
34. R. Ebrahimi and A. Najafizadeh, A new method for evaluation of friction in bulk metal forming, J. Mater. Process. Technol., 2004, 152(2), p 136–143. https://doi.org/10.1016/j.jmatprotec.2004.03.02910.1016/j.jmatprotec.2004.03.029 ↗
35. Scientific Forming Technologies Corporation. DEFORM3d Manual, Version V8.1 (Scientific Forming Technologies Corporation, Columbus, OH, 2005)
36. A. Heidarzadeh, S. Mironov, R. Kaibyshev, and G. Çam, Friction Stir Welding/Processing of Metals and Alloys: A Comprehensive Review on Microstructural Evolution, Prog. Mater. Sci., 2020, 117, p 100752. https://doi.org/10.1016/j.pmatsci.2020.10075210.1016/j.pmatsci.2020.100752 ↗
37. W.D. Callister and D.G. Rethwisch, Fundamentals of Materials Science and Engineering, Vol 471660817 Wiley, New York, 2013.