Characterisation of Sustainable Aluminium Metal Matrix Composites with Alumina and Fly-ash-Cenosphere Processed by Ultrasonic-Stir-Squeeze Casting

1. A. Mostafa and N. Alshabatat, Microstructural, Mechanical and Wear Properties of Al-1.3% 1.3%Si Alloy as Compared to Hypo/Hyper-Eutectic Compositions in Al-Si Alloy System, Crystals, 2022, 12(5), p 1-17. https://doi.org/10.3390/cryst1205071910.3390/cryst12050719 ↗

2. H. Torabian, J.P. Pathak, and S.N. Tiwari, Wear Characteristics of Al-Si Alloys”, Wear, 1994, 172(1), p 49–58. https://doi.org/10.1016/0043-1648(94)90298-410.1016/0043-1648(94)90298-4 ↗

3. W. Khalaf and M. Hamzah, Exploring the Impact Resistance of Hybrid Sandwich Composite Body Armor Through Experimental Analysis, Eng. Technol. J., 2024 https://doi.org/10.30684/etj.2024.142961.155510.30684/etj.2024.142961.1555 ↗

4. D.K. Dinesh and D.G. Solomon, Investigations on Microstructure and Mechanical Properties on LM30-B4C Nanocomposites Fabricated Through Ultrasonic-Squeeze Assisted Stir-Casting”, Mater. Today Commun., 2023, 37, p 106978. https://doi.org/10.1016/j.mtcomm.2023.10697810.1016/j.mtcomm.2023.106978 ↗

5. K.K. Rajagopal, S.V. Kannappan, S.K. Madasamy, B.S. Arputharaj, P. Rajendran, A.H. Deif, and V. Raja, Experimental Studies on Microstructural, Physical, and Mechanical Characterizations of Hybrid Aluminium Metal Matrix Composites Incorporated with Cenosphere and Molybdenum Disulphide, J. Eng. (United Kingdom), 2024, 2024(1), p 5964256. https://doi.org/10.1155/2024/596425610.1155/2024/5964256 ↗

6. A.H. Idrisi and A.H.I. Mourad, Conventional Stir Casting Versus Ultrasonic Assisted Stir Casting Process: Mechanical and Physical Characteristics of AMCs, J. Alloys Compd., 2019, 805, p 502–508. https://doi.org/10.1016/j.jallcom.2019.07.07610.1016/j.jallcom.2019.07.076 ↗

7. S. Pickard, P. Baraitser, J. Rymer, and J. Piper, Comparative Study, BMJ, 2003, 327(7428), p 1389. https://doi.org/10.1136/bmj.327.7428.138910.1136/bmj.327.7428.1389 ↗

8. P. Verma, G. Paul, J. Ghose, and V. Pandey, Mechanical and Wear Properties of Graphite Reinforced Aluminum Metal Matrix Composites Processed by Ultrasonic-Stir-Squeeze Casting, J. Mater. Eng. Perform., 2023, 33(11), p 5319–5330. https://doi.org/10.1007/s11665-023-08576-z10.1007/s11665-023-08576-z ↗

9. A. Mitra, S.K. Mandal, V. Dey, and R.N. Rai, Effect of Nano-B4C Particulates on the Mechanical Properties and Corrosion Behavior of Magnesium (AZ91D) Matrix-Based Nanocomposites Fabricated Through Ultrasonication-Assisted Stir Casting Method, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-10542-210.1007/s11665-024-10542-2 ↗

10. P.K. Krishnan, J.V. Christy, R. Arunachalam, A.H.I. Mourad, R. Muraliraja, M.A. Maharbi, V. Murali, and M.M. Chandra, Production of Aluminum Alloy-Based Metal Matrix Composites Using Scrap Aluminum Alloy and Waste Materials: Influence on Microstructure and Mechanical Properties, J. Alloys Compd., 2019, 784, p 1047–1061. https://doi.org/10.1016/j.jallcom.2019.01.11510.1016/j.jallcom.2019.01.115 ↗

11. S.P. Dwivedi, P. Sharma, and A. Saxena, Utilization of Waste Spent Alumina Catalyst and Agro-Waste Rice Husk Ash as Reinforcement Materials with Scrap Aluminium Alloy Wheel Matrix, Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., 2020, 234(6), p 543–552. https://doi.org/10.1177/095440892093063410.1177/0954408920930634 ↗

12. A. Ramanathan, P.K. Krishnan, and R. Muraliraja, A Review on the Production of Metal matrix Composites Through Stir Casting Furnace Design, Properties, Challenges, and Research Opportunities, J. Manuf. Process., 2019, 42, p 213–245. https://doi.org/10.1016/j.jmapro.2019.04.01710.1016/j.jmapro.2019.04.017 ↗

13. S.P. Kumarasamy, K. Vijayananth, T. Thankachan, and G.P. Muthukutti, Investigations on Mechanical and Machinability Behavior of Aluminum/Flyash Cenosphere/Gr Hybrid Composites Processed Through Compocasting, J. Appl. Res. Technol., 2017, 15(5), p 430–441. https://doi.org/10.1016/j.jart.2017.05.00510.1016/j.jart.2017.05.005 ↗

14. G. Yang, J. Zhang, H. Xie, F. Li, Z. Huang, G. Yuan, J. Zhang, Q. Jia, H. Zhang, H.A. Yeprem, and S. ZhangG, Preparation of B4Cp/Al Composites via Selective Laser Melting and their Tribological Properties, Materials (Basel)., 2022, 15(23), p 8340. https://doi.org/10.3390/ma1523834010.3390/ma15238340 ↗

15. A.M. Razzaq, D.L. Majid, U.M. Basheer, and M.R. Ishak, Effect of Fly Ash Addition on the Physical and Mechanical Properties of AA6063 Alloy Reinforcement, Metals, 2017, 7(477), p 1–15. https://doi.org/10.3390/met711047710.3390/met7110477 ↗

16. P. Chandrasekar and D. Nagaraju, Improvement of Bonding Strength at the Interfaces in Scrap Al Alloy Composites Using Electroless Ni-P Coated SiC, SILICON, 2022, 14, p 2941–2952. https://doi.org/10.1007/s12633-021-01078-410.1007/s12633-021-01078-4 ↗

17. J.V. Christy, R. Arunachalam, A.H.I. Mourad, P.K. Krishnan, S. Piya, and M. Al-Maharbi, Processing, Properties, and Microstructure of Recycled Aluminum Alloy Composites Produced Through an Optimized Stir and Squeeze Casting Processes, J. Manuf. Process., 2020, 59, p 287–301. https://doi.org/10.1016/j.jmapro.2020.09.06710.1016/j.jmapro.2020.09.067 ↗

18. A.H.I. Mourad, J.V. Christy, P.K. Krishnan, and M.S. Mozumder, Production of Novel Recycled Hybrid Metal Matrix Composites Using Optimized Stir Squeeze Casting Technique, J. Manuf. Process., 2023, 88(11), p 45–58. https://doi.org/10.1016/j.jmapro.2023.01.04010.1016/j.jmapro.2023.01.040 ↗

19. R. Dhyani, A. Zindal, V.K. Singh, and S. Chauhan, Tuning of MoS2 Particle in Al-Based Composite for Self-Lubrication, JOM, 2023, 75(8), p 2949–2961. https://doi.org/10.1007/s11837-023-05738-110.1007/s11837-023-05738-1 ↗

20. S.H. Omran, M.M. Al-Masoudy, O.H. Hassoon, and M.A. Fayad, Optimization of Mechanical Wear Resistance for Recycled (Al-Mg-Si) Reinforced Sic Composite Material Using PM Method, Curved Layered Struct., 2022, 9(1), p 295–303. https://doi.org/10.1515/cls-2022-002310.1515/cls-2022-0023 ↗

21. B.C. Kandpal, J. Kumar, and H. Singh, Fabrication and Characterisation of Al2O3/Aluminium Alloy 6061 Composites Fabricated by Stir Casting, Mater. Today Proc., 2017, 4(2), p 2783–2792. https://doi.org/10.1016/j.matpr.2017.02.15710.1016/j.matpr.2017.02.157 ↗

22. A.A. Premnath, T. Alwarsamy, T. Rajmohan, and R. Prabhu, The Influence of Alumina on Mechanical and Tribological Characteristics of Graphite Particle Reinforced Hybrid Al-MMC, J. Mech. Sci. Technol., 2014, 28(11), p 4737–4744. https://doi.org/10.1007/s12206-014-1040-310.1007/s12206-014-1040-3 ↗

23. W. Jiang, J. Zhu, G. Li, F. Guan, Y. Yu, and Z. Fan, Enhanced Mechanical Properties of 6082 Aluminum Alloy via SiC Addition Combined with Squeeze Casting, J. Mater. Sci. Technol., 2021, 88, p 119–131. https://doi.org/10.1016/j.jmst.2021.01.07710.1016/j.jmst.2021.01.077 ↗

24. B. Das, B.N. Panda, and U.S. Dixit, Effects of Heat Treatment on the Mechanical Properties of Fe-based ER70S-6 Cladding on Aluminum Substrate Using Cold Metal Transfer Process, J. Mater. Eng. Perform., 2024, 33(1), p 173–193. https://doi.org/10.1007/s11665-023-07975-610.1007/s11665-023-07975-6 ↗

25. J. Zhu, W. Jiang, G. Li, F. Guan, Y. Yu, and Z. Fan, Microstructure and Mechanical Properties of SiCnp/Al6082 Aluminum Matrix Composites Prepared by Squeeze Casting Combined with Stir Casting, J. Mater. Process. Technol., 2020, 283, 116699. https://doi.org/10.1016/j.jmatprotec.2020.11669910.1016/j.jmatprotec.2020.116699 ↗

26. A. Samuel, Y. Zedan, H. Doty, V. Songmene, and F.H. Samuel, A Review Study on the Main Sources of Porosity in Al-Si Cast Alloys, Adv. Mater. Sci. Eng., 2021, 2021(1), 1921603. https://doi.org/10.1155/2021/192160310.1155/2021/1921603 ↗

27. A.P. kumar, P. Rohatgi, and D. Weiss, 50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities, Int. J. Met., 2020, 14(2), p 291–317. https://doi.org/10.1007/s40962-019-00375-410.1007/s40962-019-00375-4 ↗

28. O. Kogtenkova, B.B. Straumal, A. Mazilkin, T. Czeppe, and P. Zięba, Phase Transformations in the Al - Mg Alloys Driven by High-Pressure Torsion, Physica status solidi (b), 2021, 258(11), p 2100210. https://doi.org/10.1002/pssb.20210021010.1002/pssb.202100210 ↗

29. K.V. Shankar, V.V. Ramalingam, G.P.G. Krishna, D. Padmakar, M.R. Leena, G. Raghunath, J. Vishnu, and R. Krishnan, Evaluating the Impact of Fly Ash Content on the Dry Sliding Wear Behaviour Evaluating the Impact of Fly Ash Content on the Dry Sliding Wear Behaviour of Al-Si-Mg-Cu Metal Matrix Composite for Lightweight Application, J. Bio Tribo Corros., 2023, 10(1), 7. https://doi.org/10.1007/s40735-023-00809-x10.1007/s40735-023-00809-x ↗

30. C. Emekwisia, C. Olelewe, C. Ibeachusi, V. Oguntola, and O. Akhabue, Experimental Analysis on the Mechanical and Microstructural Properties of Aluminium-Fly Ash Composite, FUOYE J. Eng. Technol., 2024, 9(2), p 307–312. https://doi.org/10.4314/fuoyejet.v9i2.2210.4314/fuoyejet.v9i2.22 ↗

31. P. Mohanty, R. Mahapatra, P. Padhi, C.H.V.V. Ramana, and D.K. Mishra, Ultrasonic Cavitation: an Approach to Synthesize Uniformly Dispersed Metal Matrix Nanocomposites—a Review, Nano-Structures and Nano-Objects, 2020, 23, p 100475. https://doi.org/10.1016/j.nanoso.2020.10047510.1016/j.nanoso.2020.100475 ↗

32. A.A. Adediran, K.K. Alaneme, I.O. Oladele, and E.T. Akinlabi, Microstructural Characteristics and Mechanical Behaviour of Aluminium Matrix Composites Reinforced with Si-Based Refractory Compounds Derived from Rice Husk, Cogent Eng., 2021, 8(1), 1897928. https://doi.org/10.1080/23311916.2021.189792810.1080/23311916.2021.1897928 ↗

33. A.K. Kasar, N. Gupta, P.K. Rohatgi, and P.L. Menezes, A Brief Review of Fly Ash as Reinforcement for Composites with Improved Mechanical and Tribological Properties, JOM J. Miner, Metals Mater. Soc. (TMS), 2020, 72(6), p 98. https://doi.org/10.1007/s11837-020-04170-z10.1007/s11837-020-04170-z ↗

34. A. Shishkin, V. Abramovskis, I. Zalite, A.K. Singh, G. Mezinskis, V. Popov, and J. Ozolins, Physical Thermal, and Chemical Properties of Fly Ash Cenospheres Obtained from Different Sources, Materials, 2023, 16(2035), p 1–15. https://doi.org/10.3390/ma1605203510.3390/ma16052035 ↗

35. X.Y. Liu and J.B. Adams, Grain-Boundary Segregation in Al-10% Mg Alloys at Hot Working Temperatures, Acta Mater., 1998, 46(10), p 3467–3476. https://doi.org/10.1016/S1359-6454(98)00038-X10.1016/S1359-6454(98)00038-X ↗

36. B.N.A. deep, S. Rajanna, K.N. Krishnamurthy, G.C.M. Patel, T. Ganesha, G.V.G. Reddy, M. Hasan, and E. Linul, Ultrasonic Assisted Stir Squeeze Casting of AA5456/Al2O3-SiC-Gr-MoS2 Hybrid Nanocomposites: Microstructure and Strengthening Analysis, J. Mater. Res. Technol., 2025, 34, p 1611–1635. https://doi.org/10.1016/j.jmrt.2024.12.17210.1016/j.jmrt.2024.12.172 ↗

37. J. Zhao, Y. Guo, B. Xu, C. Gu, Y. Wang, and Q. Tang, Effect of Microstructure Evolution of Iron-Rich Intermetallic Compounds on Mechanical Property of Al-7Si-0.3Mg Casting Alloy with Low Iron Content, Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 2022, 53(1), p 548–560. https://doi.org/10.1007/s11663-021-02390-510.1007/s11663-021-02390-5 ↗

38. G.C. Gu, L. Xiang, R.F. Li, H.L. Zheng, Y.P. Lu, and R. Pesci, Microstructure, Segregation and Mechanical Properties of A356 Alloy Components Fabricated by Rheo-HPDC Combined with the Swirled Enthalpy Equilibration Device (SEED) Process, J. Mater. Res. Technol., 2023, 26, p 7803–7815. https://doi.org/10.1016/j.jmrt.2023.09.15310.1016/j.jmrt.2023.09.153 ↗

39. C. Lin, S. Wu, S. Lü, P. An, and L. Wan, Microstructure and Mechanical Properties of Rheo-diecast Hypereutectic Al-Si Alloy with 2% Fe Assisted with Ultrasonic Vibration Process, J. Alloys Compd., 2013, 568, p 42–48. https://doi.org/10.1016/j.jallcom.2013.03.08910.1016/j.jallcom.2013.03.089 ↗

40. Z. Wang, A. Wang, H. Han, and J. Xie, HRTEM Study of Interfacial Structure in Sicp/A390 Composites, Mater. Res. Express, 2020, 7(4), 046514. https://doi.org/10.1088/2053-1591/ab871d10.1088/2053-1591/ab871d ↗

41. M. Honarmand, M. Salehi, S.G. Shabestari, and H. Saghafian, Impact Strength and Structural Refinement of A380 Aluminium Alloy Produced Through Gas-Induced Semi-Solid Process and Sr Addition, Trans. Nonferrous Met. Soc. China, 2022, 32(5), p 1405–1415. https://doi.org/10.1016/S1003-6326(22)65882-510.1016/S1003-6326(22)65882-5 ↗

42. R. Chen, Q. Xu, Z. Jia, and B. Liu, Precipitation Behaviour and Hardening Effects of Si-Containing Dispersoidsin Al-7Si-Mg Alloy During Solution Treatment, Mater. Des., 2016, 90, p 1059–1068. https://doi.org/10.1016/j.matdes.2015.11.06910.1016/j.matdes.2015.11.069 ↗

43. K.A.R. Kumar, K. Balamurugan, D. Ganaraj, and S. Ilangovan, Investigations on the Effect of Flyash on the Sic Reinforced Aluminium Metal Matrix Composites, Adv. Compos. Lett., 2014, 23(3), p 59–64. https://doi.org/10.1177/09636935140230030210.1177/096369351402300302 ↗

44. D. Siva, C. Shoba, and N. Ramanaiah, Investigations on Mechanical Properties of Aluminum Hybrid Composites, Integr. Med. Res., 2013, 3(1), p 79–85. https://doi.org/10.1016/j.jmrt.2013.11.00210.1016/j.jmrt.2013.11.002 ↗

45. K.V. Shankar, J. Jezierski, V.V. Ramalingam, D. Padmakumar, M.R. Leena, G.R. Amal, and R. Krishnan, Investigating the Effect of Fly Ash Addition on the Metallurgical and Mechanical Behavior of Al-Si-Mg-Cu Alloy for Engine Cylinder Head Application, Materials., 2022, 15(15), p 5462. https://doi.org/10.3390/ma1515546210.3390/ma15155462 ↗

46. P.K. Krishnan, R. Arunachalam, A. Husain, and M.A. Maharbi, Studies on the Influence of Stirrer Blade Design on the Microstructure and Mechanical Properties of a Novel Aluminum Metal Matrix Composite, J. Manuf. Sci. Eng., 2021, 143(2), p 021008. https://doi.org/10.1115/1.404826610.1115/1.4048266 ↗

47. A. Gobiraman, K. Nasrudeen, and P. Sankaran, Investigation on the Mechanical Property and Wear Characteristics of Aluminium - 6061 Hybrid Composite Reinforced with Graphene Nanoplatelets by Stir Casting, J. Inst. Eng. (India): Series C, 2024, 105(5), p 1147–1163. https://doi.org/10.1007/s40032-024-01085-510.1007/s40032-024-01085-5 ↗

48. M. Rahman, A. Dey, and K.M. Pandey, Machinability of Cenosphere Particulate–Reinforced AA6061 Aluminium Alloy Prepared by Compocasting, Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf., 2018, 232(14), p 2499–2509. https://doi.org/10.1177/095440541769901310.1177/0954405417699013 ↗

49. L.V.T.V.A.K. Ravikumar, Microstructural Characteristics and Mechanical Behaviour of Aluminium Hybrid Composites Reinforced with Groundnut Shell Ash and B4C, J. Braz. Soc. Mech. Sci. Eng., 2019 https://doi.org/10.1007/s40430-019-1800-110.1007/s40430-019-1800-1 ↗

50. S. Varatharaju, T.P. Ramaswamy, and B.S. Rajarathnam, The Abrasive Wear Behavior of Cenosphere-Aluminium -+-+, Acta Metall. Slovaca, 2014, 20(2), p 177–188. https://doi.org/10.12776/ams.v20i2.23910.12776/ams.v20i2.239 ↗

51. T. Bera, S.K. Acharya, and G. Sutradhar, Mechanical and Dry Sliding Wear Behaviour of LM6/Cenosphere Composites, Int. J. Eng. Sci. Technol., 2019, 11(1), p 1–9. https://doi.org/10.4314/ijest.v11i1.110.4314/ijest.v11i1.1 ↗