Fracture Identification during the Incremental Forming Process Using a Calibrated Damage Model with Optimized Sample Geometries
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. M.-S. Shim and J.-J. Park, The Formability of Aluminum Sheet in Incremental Forming, J. Mater. Process. Technol., 2001, 113, p 654–658.10.1016/S0924-0136(01)00679-3 ↗
2. P.A.F. Martins, N. Bay, M. Skjødt, and M.B. Silva, Theory of Single Point Incremental Forming, CIRP Ann., 2008, 57, p 247–252.10.1016/j.cirp.2008.03.047 ↗
3. F. Maqbool and M. Bambach, Dominant Deformation Mechanisms in Single Point Incremental Forming (SPIF) and Their Effect on Geometrical Accuracy, Int. J. Mech. Sci., 2018, 136, p 279–292.10.1016/j.ijmecsci.2017.12.053 ↗
4. S. Basak, K.S. Prasad, A. Mehto, J. Bagchi, Y.S. Ganesh, S. Mohanty, A.M. Sidpara, and S.K. Panda, Parameter Optimization and Texture Evolution in Single Point Incremental Sheet Forming Process, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2020, 234, p 126–139.10.1177/0954405419846001 ↗
5. C.C. Coman, S.-N. Mazurchevici, C. Carausu, and D. Nedelcu, Analysis of Incremental Sheet Forming of Aluminum Alloy, Materials, 2023, 16, p 6371.10.3390/ma16196371 ↗
6. N. Bari and S. Kumar, Multi-Stage Single-Point Incremental Forming: An Experimental Investigation of Surface Roughness and Forming Time, J. Mater. Eng. Perform., 2023, 32, p 1369–1381.10.1007/s11665-022-07183-8 ↗
7. M. Sharma, A. Bhattacharya, and S.K. Paul, Explicating Tensile Response of AA6061-T6 Sheet Post Single Point Incremental Forming: Two Camera-DIC Strain Measurement and Texture Analysis, Mech. Mater., 2024, 192, p 104963.10.1016/j.mechmat.2024.104963 ↗
8. S.K. Paul, Controlling Factors of Forming Limit Curve: A Review, Adv. Ind. Manuf. Eng., 2021, 2, p 100033.
9. S.B. Kim, H. Huh, H.H. Bok, and M.B. Moon, Forming Limit Diagram of Auto-Body Steel Sheets for High-Speed Sheet Metal Forming, J. Mater. Process. Technol., 2011, 211, p 851–862.10.1016/j.jmatprotec.2010.01.006 ↗
10. U. Attique, S.I. Butt, S.H.I. Jaffery, F. Zhang, and G. Hussain, Formability Characterization of Steel Tailor Welded Blanks Formed Through Single Point Incremental Forming, J. Market. Res., 2024, 28, p 1941–1956.
11. K. Isik, M.B. Silva, A.E. Tekkaya, and P.A.F. Martins, Formability Limits by Fracture in Sheet Metal Forming, J. Mater. Process. Technol., 2014, 214, p 1557–1565.10.1016/j.jmatprotec.2014.02.026 ↗
12. S. Basak, K.S. Prasad, A.M. Sidpara, and S.K. Panda, Single Point Incremental Forming of AA6061 Thin Sheet: Calibration of Ductile Fracture Models Incorporating Anisotropy and Post Forming Analyses, Int. J. Mater. Form., 2019, 12, p 623–642.10.1007/s12289-018-1439-y ↗
13. K. Jawale, J.F. Duarte, A. Reis, and M.B. Silva, Characterizing Fracture Forming Limit and Shear Fracture Forming Limit for Sheet Metals, J. Mater. Process. Technol., 2018, 255, p 886–897.10.1016/j.jmatprotec.2018.01.035 ↗
14. N. Habibi, A. Zarei-Hanzaki, and H.-R. Abedi, An Investigation Into the Fracture Mechanisms of Twinning-Induced-Plasticity Steel Sheets Under Various Strain Paths, J. Mater. Process. Technol., 2015, 224, p 102–116.10.1016/j.jmatprotec.2015.04.014 ↗
15. A. Abedini, C. Butcher, and M.J. Worswick, Fracture Characterization of Rolled Sheet Alloys in Shear Loading: Studies of Specimen Geometry, Anisotropy, and Rate Sensitivity, Exp. Mech., 2017, 57, p 75–88.10.1007/s11340-016-0211-9 ↗
16. A. Kumar, A.K. Singh, A. Shrivastava, S. Mishra, and K. Narasimhan, Shear Modified Lemaitre Damage Model for Fracture Prediction During Incremental Sheet Forming, Int. J. Solids Struct., 2022, 252, p 111822.10.1016/j.ijsolstr.2022.111822 ↗
17. B.S. Katiyar, S.K. Panda, and P. Saha, Fabrication of a Prototype of Bumper Beam by Single Point Incremental Forming of Laser Welded Tailored Blank and Characterization of Its Quasi-Static Crushing Performance, Arch. Civ. Mech. Eng., 2024, 24, p 141.10.1007/s43452-024-00949-y ↗
18. P.K. Gandla, S. Pandre, K. Suresh, N. Kotkunde, and S.K. Singh, Evaluation of Fracture Limits of Deep Drawing Quality Steel Using Stretching, Incremental Forming and Double-Notched Tensile Tests, J. Braz. Soc. Mech. Sci. Eng., 2023 https://doi.org/10.1007/s40430-023-04066-410.1007/s40430-023-04066-4 ↗
19. M.J. Mirnia and M. Shamsari, Numerical Prediction of Failure in Single Point Incremental Forming Using a Phenomenological Ductile Fracture Criterion, J. Mater. Process. Technol., 2017, 244, p 17–43.10.1016/j.jmatprotec.2017.01.029 ↗
20. T. Xu, F. Li, G. Zhang, and X. Fan, Effect of Plastic Anisotropy on Notch Deformation Behavior of 7075 High-Strength Aluminum Alloy Sheet Subjected to Axial Tension, Theoret. Appl. Fract. Mech., 2023, 124, p 103828.10.1016/j.tafmec.2023.103828 ↗
21. C. Zeng and X. Fang, Specimen Geometry Design for Plasticity and Fracture Characterization of Sheet Metal Under High Testing Speed and Various Stress States, Thin-Walled Struct., 2023, 186, p 110688.10.1016/j.tws.2023.110688 ↗
22. L. Pérez Caro, M. Schill, K. Haller, E.-L. Odenberger, and M. Oldenburg, Damage and Fracture during Sheet-Metal Forming of Alloy 718, Int. J. Mater. Form., 2020, 13, p 15–28.10.1007/s12289-018-01461-4 ↗
23. W. Liu, J. Lian, and S. Münstermann, Damage Mechanism Analysis of a High-Strength Dual-Phase Steel Sheet with Optimized Fracture Samples For Various Stress States and Loading Rates, Eng. Fail. Anal., 2019, 106, p 104138.10.1016/j.engfailanal.2019.08.004 ↗
24. S. Basak, C. Kim, W. Jeong, Y.I. Jung, and M.-G. Lee, Numerical Prediction of Sheared Edge Profiles in Sheet Metal Trimming using Ductile Fracture Modeling, Int. J. Mech. Sci., 2022, 219, p 107109.10.1016/j.ijmecsci.2022.107109 ↗
25. C.C. Roth and D. Mohr, Ductile Fracture Experiments with Locally Proportional Loading Histories, Int. J. Plast., 2016, 79, p 328–354.10.1016/j.ijplas.2015.08.004 ↗
26. Y. Bao and T. Wierzbicki, On Fracture Locus in the Equivalent Strain and Stress Triaxiality Space, Int. J. Mech. Sci., 2004, 46, p 81–98.10.1016/j.ijmecsci.2004.02.006 ↗
27. S. Basak, S.K. Panda, and M.-G. Lee, Formability and Fracture in Deep Drawing Sheet Metals: Extended Studies for Pre-strained Anisotropic Thin Sheets, Int. J. Mech. Sci., 2020, 170, p 105346.10.1016/j.ijmecsci.2019.105346 ↗
28. S. Basak and S.K. Panda, Use of Uncoupled Ductile Damage Models for Fracture Forming Limit Prediction during Two-Stage Forming of Aluminum Sheet Material, J. Manuf. Process., 2023, 97, p 185–199.10.1016/j.jmapro.2023.04.042 ↗
29. Y.K. Dewangan, A. Gupta, K. Bandyopadhyay, A. Faye, and M.-G. Lee, Incorporation of Anisotropy for the Failure Prediction of AA6061 during SPIF Process, Int. J. Adv. Manuf. Technol., 2025, 136, p 279–296.10.1007/s00170-024-14017-5 ↗
30. K. Han, X. Li, X. Peng, H. Wang, D. Li, Y. Li, and Q. Li, Experimental and Numerical Study on the Deformation Mechanism of Straight Flanging by Incremental Sheet Forming, Int. J. Mech. Sci., 2019, 160, p 75–89.10.1016/j.ijmecsci.2019.06.024 ↗
31. H. Talebi-Ghadikolaee, H. Moslemi Naeini, M.J. Mirnia, M.A. Mirzai, S. Alexandrov, and H. Gorji, Experimental and Numerical Investigation of Failure During Bending of AA6061 Aluminum Alloy Sheet Using the Modified Mohr-Coulomb Fracture Criterion, Int. J. Adv. Manuf. Technol., 2019, 105, p 5217–5237.10.1007/s00170-019-04549-6 ↗
32. S. Basak and S.K. Panda, Failure Strains of Anisotropic Thin Sheet Metals: Experimental Evaluation and Theoretical Prediction, Int. J. Mech. Sci., 2019, 151, p 356–374. https://doi.org/10.1016/j.ijmecsci.2018.10.06510.1016/j.ijmecsci.2018.10.065 ↗
33. M. Chinara, S.K. Paul, S. Chatterjee, and S. Mukherjee, Effect of Planar Anisotropy on the Hole Expansion Ratio of Cold-Rolled DP 590 Steel, Trans. Indian Inst. Metals, 2022, 75, p 535–543.10.1007/s12666-021-02444-x ↗
34. R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proc. R. Soc. Lond. A Math. Phys. Sci., 1948, 193, p 281–297.
35. S. Kurra and S.P. Regalla, Experimental and Numerical Studies on Formability of Extra-Deep Drawing Steel in Incremental Sheet Metal Forming, J. Mater. Res. Technol., 2014, 3, p 158–171.10.1016/j.jmrt.2014.03.009 ↗
36. K. Suresh, S.D. Bagade, and S.P. Regalla, Deformation Behavior of Extra Deep Drawing Steel in Single-Point Incremental Forming, Mater. Manuf. Process., 2015, 30, p 1202–1209.10.1080/10426914.2014.994755 ↗