Effect of Rotary Swaging on the Mechanical Properties of 90W-7Ni-3Fe High-Density Tungsten Alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Y. Yang, W. Zhang, and E. Wang, Effect of Heat Treatment on Microstructure and Mechanical Properties of Hot-Hydrostatically Extruded 93W-4.9Ni-2.1Fe Alloy, J. Alloy. Compd., 2015 https://doi.org/10.1016/j.jallcom.2014.11.00910.1016/j.jallcom.2014.11.009 ↗
2. T. Dewen, S. Zou, and Y. Liang, Influence of Microelement Hf on Microstructure, Mechanical Properties and Shielding Effect of W-Ni-Fe Alloy, J. Alloy. Compd., 2017 https://doi.org/10.1016/j.jallcom.2017.07.03710.1016/j.jallcom.2017.07.037 ↗
3. Y. Yang, Z. Ming, C. Ren, and W. Zhang, Effect of Strain Rate on the Plastic Deformation and Fracture of 90W-7Ni-3Fe Alloy Prepared by Liquid-Phase Sintering, J. Mater. Eng. Perform., 2018, 27, p 6606–6615. https://doi.org/10.1007/s11665-018-3772-110.1007/s11665-018-3772-1 ↗
4. K. Gao, X. Yueyang, G. Tang, L. Fan, R. Zhang, and L. An, Oscillating Pressure Sintering of W-Ni-Fe Refractory Alloy, J. Alloy. Compd., 2019 https://doi.org/10.1016/j.jallcom.2019.07.14110.1016/j.jallcom.2019.07.141 ↗
5. C. Ben, L. Zhi-Bo, L. Jun-Ru, and Z. Guo-Hua, Effect of Molybdenum Addition on Microstructure and Mechanical Properties of 90% Tungsten Heavy Alloys, Int. J. Refract Metal Hard Mater., 2022 https://doi.org/10.1016/J.IJRMHM.2022.10586810.1016/J.IJRMHM.2022.105868 ↗
6. N.S. Shakunt and A. Upadhyaya, Effect of Fe Addition in W-Ni-Cu Heavy Alloy Processed through Powder Metallurgy on Microstructure and Mechanical Properties, J. Alloy. Compd., 2024, 970, p 172578. https://doi.org/10.1016/J.JALLCOM.2023.17257810.1016/J.JALLCOM.2023.172578 ↗
7. P.V. Krasovskii, A.V. Samokhin, A.A. Fadeev, M.A. Sinayskiy, and S.K. Sigalaev, Alloying Effects and Composition Inhomogeneity of Plasma-Created Multimetallic Nanopowders: A Case Study of the W-Ni-Fe Ternary System, J. Alloy. Compd., 2018 https://doi.org/10.1016/j.jallcom.2018.03.36710.1016/j.jallcom.2018.03.367 ↗
8. L.L. Dong, M. Ahangarkani, W.G. Chen, and Y.S. Zhang, Recent Progress in Development of Tungsten-Copper Composites: Fabrication, Modification and Applications, Int. J. Refract Metal Hard Mater., 2018, 75, p 30–42. https://doi.org/10.1016/j.ijrmhm.2018.03.01410.1016/j.ijrmhm.2018.03.014 ↗
9. A. Panchal and T.K. Nandy, Effect of Composition, Heat Treatment and Deformation on Mechanical Properties of Tungsten Heavy Alloys, Mater. Sci. Eng. A, 2018, 733, p 374–384. https://doi.org/10.1016/j.msea.2018.07.07010.1016/j.msea.2018.07.070 ↗
10. Z. Xiaoqing, L. Shukui, L. Jinxu, W. Yingchun, and W. Xing, Self-Sharpening Behavior during Ballistic Impact of the Tungsten Heavy Alloy Rod Penetrators Processed by Hot-Hydrostatic Extrusion and Hot Torsion, Mater. Sci. Eng. A, 2010 https://doi.org/10.1016/j.msea.2010.04.05010.1016/j.msea.2010.04.050 ↗
11. Yu. Yang, C. Ren, and W. Zhang, Compressive Behavior of Liquid Phase Sintered 90 W-7Ni-3Fe Heavy Alloy at High Temperature and Low Strain Rate Condition, Int. J. Refract Metal Hard Mater., 2018, 76, p 149–157. https://doi.org/10.1016/j.ijrmhm.2018.06.00610.1016/j.ijrmhm.2018.06.006 ↗
12. G. Olgierd, G. Zbigniew, M. Mariusz, B. Ewa, S. Paweł, P. Zygmunt, and J. Wieslaw, Development and Experimental Verification of the New WHA Sinters Intended for Kinetic Energy Projectiles, Continuum Mech. Thermodyn., 2023, 6, p 2193–2205. https://doi.org/10.1007/S00161-023-01241-910.1007/S00161-023-01241-9 ↗
13. M.B. Shongwe, S. Diouf, M.O. Durowoju, P.A. Olubambi, M.M. Ramakokovhu, and B.A. Obadele, A Comparative Study of Spark Plasma Sintering and Hybrid Spark Plasma Sintering of 93W-4.9 Ni-2.1 Fe Heavy Alloy, Int. J. Refract Metal Hard Mater., 2016, 55, p 16–23. https://doi.org/10.1016/j.ijrmhm.2015.11.00110.1016/j.ijrmhm.2015.11.001 ↗
14. G. Prabhu, N. Arvind Kumar, M. Sankaranarayana, and T.K. Nandy, Tensile and Impact Properties of Microwave Sintered Tungsten Heavy Alloys, Mater. Sci. Eng. A, 2014 https://doi.org/10.1016/j.msea.2014.03.13010.1016/j.msea.2014.03.130 ↗
15. X. Lei, C. Srinivasakannan, L. Zhang, M. Yan, J. Peng, H. Xia, and S. Guo, Fabrication of Tungsten-Copper Alloys by Microwave Hot Pressing Sintering, J. Alloy. Compd., 2016 https://doi.org/10.1016/j.jallcom.2015.10.18610.1016/j.jallcom.2015.10.186 ↗
16. Y. Wang, Y. Zhang, P. Fan, Z. Li, W. Liu, J. Wang, and Y. Ma, Co-Sintering Characteristics of W-Re Pre-Alloyed Powder and Ni, Fe, Int. J. Refract Metal Hard Mater., 2024, 121, p 106688. https://doi.org/10.1016/J.IJRMHM.2024.10668810.1016/J.IJRMHM.2024.106688 ↗
17. Z. Li, Y. Chen, S. Wei, K. Pan, H. Shen, and X. Liujie, Effect of Rotary Swaging and Subsequent Annealing on Microstructure and Mechanical Properties of W-1.5ZrO2 Alloys, J. Alloy. Compd., 2021 https://doi.org/10.1016/J.JALLCOM.2021.16004110.1016/J.JALLCOM.2021.160041 ↗
18. Y. Yang, H. Lianxi, and W. Erde, Microstructure and Mechanical Properties of a Hot-Hydrostatically Extruded 93W-4.9 Ni-2.1 Fe alloy, Mater. Sci. Eng. A, 2006, 435, p 620–624. https://doi.org/10.1016/j.msea.2006.07.07410.1016/j.msea.2006.07.074 ↗
19. G. Anjali Kumari, M.S. Prabhu, and T.K. Nandy, Effect of Solution Treatment Temperature and Cooling Rate on the Mechanical Properties of Tungsten Heavy Alloy, Mater. Sci. Eng. A, 2017 https://doi.org/10.1016/j.msea.2017.01.11310.1016/j.msea.2017.01.113 ↗
20. Y. Yang, H. Hai, W. Zhang, and X. Xiaoqiang, Microstructure Evolution and Recrystallization After Annealing of Tungsten Heavy Alloy Subjected to Severe Plastic Deformation, J. Alloy. Compd., 2016 https://doi.org/10.1016/j.jallcom.2016.07.00410.1016/j.jallcom.2016.07.004 ↗
21. M. Li, Z. Ming, Y. Yang, and W. Zhang, Elevated Temperature Tensile Behavior and Microstructure Evolution of Liquid Phase Sintered 90W-7Ni-3Fe Alloy, J. Alloy. Compd., 2019, 802, p 528–534. https://doi.org/10.1016/j.jallcom.2019.06.22210.1016/j.jallcom.2019.06.222 ↗
22. Y. Yang, Z. Wencong, C. Yu, and W. Erde, Effect of Swaging on Microstructure and Mechanical Properties of Liquid-Phase Sintered 93W–4.9(Ni, Co)-2.1Fe Alloy, Int. J. Refract Metal Hard Mater., 2014 https://doi.org/10.1016/j.ijrmhm.2014.01.01610.1016/j.ijrmhm.2014.01.016 ↗
23. U. Ravi Kiran, A. Panchal, M. Sankaranarayana, and T.K. Nandy, Tensile and Impact Behavior of Swaged Tungsten Heavy Alloys Processed by Liquid Phase Sintering, Int. J. Refract Metal Hard Mater., 2013 https://doi.org/10.1016/j.ijrmhm.2012.10.00210.1016/j.ijrmhm.2012.10.002 ↗
24. S. Fida Hassan, S. Kamran, A.A. Salhabi, A.A. Ahmed, S. Nouari, and A.S. Hakeem, Tungsten Heavy Alloy: Nano-Crystallinity and Alloying Induced Low Temperature Sintering, Microstructure and Mechanical Properties, Int. J. Refract Metal Hard Mater., 2024 https://doi.org/10.1016/j.ijrmhm.2024.10662710.1016/j.ijrmhm.2024.106627 ↗
25. Z. Wentan, L. Wensheng, M. Yunzhu, M. Shangru, W. Jianning, D. Youteng, and C. Qingshan, Influence of Microstructure on Crack Initiation and Propagation Behavior in Swaged Tungsten Heavy Alloy During Charpy Impact Process, Mater. Sci. Eng. A, 2023, 862, p 144219. https://doi.org/10.1016/J.MSEA.2022.14421910.1016/J.MSEA.2022.144219 ↗
26. U. Ravi Kiran, A. Sambasiva Rao, M. Sankaranarayana, and T.K. Nandy, Swaging and Heat Treatment Studies on Sintered 90W-6Ni-2Fe-2Co Tungsten Heavy Alloy, Int. J. Refract Metal Hard Mater., 2012 https://doi.org/10.1016/j.ijrmhm.2012.03.00310.1016/j.ijrmhm.2012.03.003 ↗
27. X. Gong, J.L. Fan, F. Ding, M. Song, and B.Y. Huang, Effect of Tungsten Content on Microstructure and Quasi-Static Tensile Fracture Characteristics of Rapidly Hot-Extruded W-Ni-Fe Alloys, Int. J. Refract Metal Hard Mater., 2011, 1, p 71–77. https://doi.org/10.1016/j.ijrmhm.2011.06.01410.1016/j.ijrmhm.2011.06.014 ↗
28. S. Jingxuan, Z. Lei, H. Yufeng, C. Baishan, F. Peiyuan, L. Wensheng, and M. Yunzhu, Effect of Rotary Swaging on Microstructure Evolution and Adiabatic Shear Sensitivity of 90W-7Ni-3Fe Alloy under Dynamic Loading, Mater. Sci. Eng. A, 2022, 860, p 144333. https://doi.org/10.1016/J.MSEA.2022.14433310.1016/J.MSEA.2022.144333 ↗
29. G. Ka, Z. Wei, L. Weidong, L. Wei, and A. Linan, Hot Oscillation Pressure Sintered and Post Heat Treated 90W-7NI-3FE Refractory Alloy, JOM, 2023 https://doi.org/10.1007/S11837-023-05789-410.1007/S11837-023-05789-4 ↗
30. U. Ravi Kiran, S. Venkat, B. Rishikesh, V.K. Iyer, M. Sankaranarayana, and T.K. Nandy, Effect of Tungsten Content on Microstructure and Mechanical Properties of Swaged Tungsten Heavy Alloys, Mater. Sci. Eng. A, 2013 https://doi.org/10.1016/j.msea.2013.06.04110.1016/j.msea.2013.06.041 ↗
31. T. Yang, Y. Wang, J. Liu, X. Hong, Y. Ni, C. Cheng, and J. Fan, Study on the Mechanical Properties of Tungsten Alloys with Respect to Tungsten Content and Post-Treatment Processes, Mater. Lett., 2025 https://doi.org/10.1016/J.MATLET.2025.13814110.1016/J.MATLET.2025.138141 ↗
32. G. Jiten Das, S.K. Appa Rao, M.S. Pabi, and T.K. Nandy, Thermo-Mechanical Processing, Microstructure and Tensile Properties of a Tungsten Heavy Alloy, Mater. Sci. Eng. A, 2014 https://doi.org/10.1016/j.msea.2014.06.07210.1016/j.msea.2014.06.072 ↗
33. S. Poluru, A. Jaimin, N. Kotkunde, S.K. Singh, A. Panchal, and P. Gnanasambandam, Flow Stress and Work Hardening Behavior of 92W-5Co-3Ni Alloy at Different Strain Rates and Elevated Temperatures, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/S11665-024-09965-810.1007/S11665-024-09965-8 ↗
34. Hu. Xiaonan, H. Dong, Y. Zhang, and P. Li, Microstructure and Compressive Deformation Behavior of W-Ni3Al-Co Model Alloys by Two-Step Sintering, Mater. Today Commun., 2024 https://doi.org/10.1016/j.mtcomm.2024.10823910.1016/j.mtcomm.2024.108239 ↗