Influence of Second-Phase Particles on GH3536 Nickel-Based Superalloy in Selective Laser Melting Process
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. M.L. Montero-Sistiaga, Z. Liu, L. Bautmans, S. Nardone, G. Ji, J.-P. Kruth, J. Van Humbeeck, and K. Vanmeensel, Effect of Temperature on the Microstructure and Tensile Properties of Micro-Crack Free Hastelloy X Produced by Selective Laser Melting, Addit. Manuf., 2020, 31, 100995.
2. Q. Ren, J. Chen, J. Lu, X. Cheng, Y. Zhang, and Z. Zhang, In-Situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C, Mater. Sci. Eng. A, 2024, 900, p 146452.10.1016/j.msea.2024.146452 ↗
3. Q. Jia, and D. Gu, Selective Laser Melting Additive Manufacturing of INCONEL 718 Superalloy Parts: Densification, Microstructure and Properties, J. Alloys Compd., 2014, 585, p 713–721.10.1016/j.jallcom.2013.09.171 ↗
4. D. Tomus, P.A. Rometsch, M. Heilmaier, and X. Wu, Effect of Minor Alloying Elements on Crack-Formation Characteristics of Hastelloy-X Manufactured by Selective Laser Melting, Addit. Manuf., 2017, 16, p 65–72.
5. N.J. Harrison, I. Todd, and K. Mumtaz, Reduction of Micro-Cracking in Nickel Superalloys Processed by Selective Laser Melting: A Fundamental Alloy Design Approach, Acta Mater., 2015, 94, p 59–68.10.1016/j.actamat.2015.04.035 ↗
6. Z. Zhang, Q. Han, S. Yang, Y. Yin, J. Gao, and R. Setchi, Laser Powder Bed Fusion of Advanced Submicrometer TiB2 Reinforced High-Performance Ni-Based Composite, Mater. Sci. Eng. A, 2021, 817, p 141416.10.1016/j.msea.2021.141416 ↗
7. M.L. Montero-Sistiaga, S. Pourbabak, J. Van Humbeeck, D. Schryvers, and K. Vanmeensel, Microstructure and Mechanical Properties of Hastelloy X Produced by HP-SLM (High Power Selective Laser Melting), Mater. Des., 2019, 165, 107598.10.1016/j.matdes.2019.107598 ↗
8. J. Gao, F. Liu, L. Liu, F. Liu, Q. You, Y. Zheng, P. Wang, and H. Qiu, Effect of TiB2 Content on Microstructure and Mechanical Properties of GH3536 Superalloy Formed by Laser Solid Forming, Mater. Today Commun., 2023, 37, 107168.10.1016/j.mtcomm.2023.107168 ↗
9. S. Zhou, Q. An, X. Chen, L. Huang, R. Zhang, F. Sun, R. Chen, C. Wang, W. Lu, and L. Geng, Improvement in Tensile Strength of GH3536-TiB2 Composites Fabricated by Powder Metallurgy, Mater. Sci. Eng. A, 2023, 873, p 145047.10.1016/j.msea.2023.145047 ↗
10. Y. Li, J. Liu, M. Song, Y. Zhang, Y. Li, and X. Zhang, Microstructure and Properties of TiCp/GH3536 Prepared by Selective Laser Melting, J. Phys. Conf. Series, 2023, 2639, p 012020.10.1088/1742-6596/2639/1/012020 ↗
11. Q. Han, Y. Gu, J. Huang, L. Wang, K.W.Q. Low, Q. Feng, Y. Yin, and R. Setchi, Selective Laser Melting of Hastelloy X Nanocomposite: Effects of TiC Reinforcement on Crack Elimination and Strength Improvement, Compos. B, 2020, 202, 108442.10.1016/j.compositesb.2020.108442 ↗
12. Q. Han, Y. Gu, L. Wang, Q. Feng, H. Gu, R. Johnston, and R. Setchi, Effects of TiC Content on Microstructure and Mechanical Properties of Nickel-Based hastelloy X Nanocomposites Manufactured by Selective Laser Melting, Mater. Sci. Eng. A, 2020, 796, p 140008.10.1016/j.msea.2020.140008 ↗
13. J. Hu, X. Lin, and Y. Hu, High Wear Resistance and Strength of Hastelloy X Reinforced with TiC Fabricated by Laser Powder Bed Fusion Additive Manufacturing, Appl. Surf. Sci., 2024, 648, 159004.10.1016/j.apsusc.2023.159004 ↗
14. S. Yang, Q. Han, Y. Yin, J. Gao, Z. Zhang, Y. Gu, and K.W.Q. Low, Effects of Micrometer-Sized TiB2 on Crack Mitigation, Mechanical and Electrochemical Performance of a Ni-Based Alloy Fabricated by Selective Laser Melting, Opt. Laser Technol., 2021, 142, 107240.10.1016/j.optlastec.2021.107240 ↗
15. W. Cheng, Y. Liu, X. Xiao, B. Huang, Z. Zhou, and X. Liu, Microstructure and Mechanical Properties of a novel (TiB2+TiC)/AlSi10Mg Composite Prepared by Selective Laser Melting, Mater. Sci. Eng. A, 2022, 834, p 142435.10.1016/j.msea.2021.142435 ↗
16. Yn. Song, Q. Sun, K. Guo, X. Wang, J. Liu, and J. Sun, Effect of Scanning Strategies on the Microstructure and Mechanical Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting, Mater. Sci. Eng. A, 2020, 793, p 139879.10.1016/j.msea.2020.139879 ↗
17. C. Guo, Z. Yu, X. Hu, G. Li, F. Zhou, Z. Xu, S. Han, Y. Zhou, R.M. Ward, and Q. Zhu, Y2O3 Nanoparticles Decorated IN738LC Superalloy Manufactured by Laser Powder Bed Fusion: Cracking Inhibition, Microstructures and Mechanical Properties, Compos. B, 2022, 230, 109555.10.1016/j.compositesb.2021.109555 ↗
18. J. Ordonez-Miranda, and J.J. Alvarado-Gil, Thermal Conductivity of Nanocomposites with High Volume Fractions of Particles, Compos. Sci. Technol., 2012, 72(7), p 853–857.10.1016/j.compscitech.2012.02.016 ↗
19. Q. Han, R. Mertens, M.L. Montero-Sistiaga, S. Yang, R. Setchi, K. Vanmeensel, B. Van Hooreweder, S.L. Evans, and H. Fan, Laser Powder Bed Fusion of Hastelloy X: Effects of Hot Isostatic Pressing and the Hot Cracking Mechanism, Mater. Sci. Eng. A, 2018, 732, p 228–239.10.1016/j.msea.2018.07.008 ↗
20. G. Marchese, G. Basile, E. Bassini, A. Aversa, M. Lombardi, D. Ugues, P. Fino, and S. Biamino, Study of the Microstructure and Cracking Mechanisms of Hastelloy X Produced by Laser Powder Bed Fusion, Materials, 2018, 11(1), p 106.10.3390/ma11010106 ↗
21. X. Cheng, Y. Zhao, Z. Qian, J. Wu, J. Dong, Z. Ma, and Y. Liu, Crack Elimination and Mechanical Properties Enhancement in Additive Manufactured Hastelloy X Via in-Situ Chemical Doping of Y2O3, Mater. Sci. Eng. A, 2021, 824, p 141867.10.1016/j.msea.2021.141867 ↗
22. W. Jinglin, Y.A.O. Zhihao, D. Jianxin, and J. He, Effects of Different Element Content on Precipitate Behavior of Precipitates in Haynes282 Alloy, Mater. Mech. Eng., 2019, 43(10), p 59–65.
23. P. Jin, J. Zhou, J. Zhou, Y. Liu, and Q. Sun, Contribution Made by Double-Sized TiC Particles Addition to the Ductility–Strength Synergy in Wire and arc Additively Manufactured Al-Cu Alloys, Compos. B, 2024, 268, 111078.10.1016/j.compositesb.2023.111078 ↗
24. Y. Liang, W. Yan, X. Shi, Y. Li, W. Wang, Q. Shi, Y. Shan, and K. Yang, Transfer from M3B2 Boride to BN Nitride in 9Cr3W3CoB Martensitic Heat-Resistant Steel, J. Mater. Res. Technol., 2021, 13, p 513–523.10.1016/j.jmrt.2021.05.004 ↗
25. R. Wang, D.-H. Wang, P. Zhang, Z.-Q. Yang, J.-J. Liang, and J.-G. Li, Effect of Boron Addition on Microstructure and Mechanical Properties of an Additively Manufactured Superalloy, J. Iron. Steel Res. Int., 2023, 30(3), p 601–609.10.1007/s42243-022-00825-0 ↗
26. X. Wang, Z. Ji, R.O. Ritchie, I. Okulov, J. Eckert, and C. Qiu, Solving the Problem of Solidification Cracking During Additive Manufacturing of CrMnFeCoNi High-Entropy Alloys Through Addition of Cr3C2 Particles to Enhance Microstructure and Properties, Mater. Today Adv., 2023, 18, 100371.10.1016/j.mtadv.2023.100371 ↗
27. H. Zhang, Y. Wu, Y. Wang, W. Deng, G. Xu, K. Luo, and J. Lu, In-Situ Nanoscale Precipitation Behavior and Strengthening Mechanism of WC/IN718 Composites Manufactured by Laser Powder Bed Fusion, Compos. B, 2024, 284, 111727.10.1016/j.compositesb.2024.111727 ↗
28. Y.Z. Zhou, and A. Volek, Effect of Grain Boundary Fraction on Castability of a Directionally Solidified Nickel Alloy, Scr. Mater., 2006, 54(12), p 2169–2174.10.1016/j.scriptamat.2006.02.032 ↗
29. B. Xu, H. Duan, X. Chen, J. Wang, Y. Ma, P. Jiang, F. Yuan, Y. Wang, Y. Ren, K. Du, Y. Wei, and X. Wu, Harnessing Instability for Work Hardening in Multi-Principal Element Alloys, Nat. Mater., 2024, 23(6), p 755–761.10.1038/s41563-024-01871-7 ↗
30. G. Liu, G.J. Zhang, F. Jiang, X.D. Ding, Y.J. Sun, J. Sun, and E. Ma, Nanostructured High-Strength Molybdenum Alloys with Unprecedented Tensile Ductility, Nat. Mater., 2013, 12(4), p 344–350.10.1038/nmat3544 ↗
31. S. Zhang, X. Lin, L. Wang, X. Yu, Y. Hu, H. Yang, L. Lei, and W. Huang, Strengthening Mechanisms in Selective Laser-Melted Inconel718 Superalloy, Mater. Sci. Eng. A, 2021, 812, p 141145.10.1016/j.msea.2021.141145 ↗
32. S. Yang, Q. Han, Y. Yin, Z. Zhang, L. Wang, Z. Zhu, H. Liu, T. Ma, and Z. Gao, Effects of TiB2 Content on the Processability and Mechanical Performance of Hastelloy-X Based Composites Fabricated by Selective Laser Melting, Opt. Laser Technol., 2022, 155, 108441.10.1016/j.optlastec.2022.108441 ↗
33. S. Jiang, J. Shen, T. Nagasaka, T. Muroga, A. Sagara, S. Ohnuki, K. Hokamoto, S. Tanaka, D. Inao, Y. Morizono, R. Kasada, and P. Zheng, Interfacial Characterization of Dissimilar-Metals Bonding Between Vanadium Alloy and Hastelloy X Alloy by Explosive Welding, J. Nucl. Mater., 2020, 539, 152322.10.1016/j.jnucmat.2020.152322 ↗
34. W.H. Yu, S.L. Sing, C.K. Chua, C.N. Kuo, and X.L. Tian, Particle-Reinforced Metal Matrix Nanocomposites Fabricated by Selective Laser Melting: A State of the Art Review, Prog. Mater. Sci., 2019, 104, p 330–379.10.1016/j.pmatsci.2019.04.006 ↗
35. F. Chen, Z. Chen, F. Mao, T. Wang, and Z. Cao, TiB2 Reinforced Aluminum based in Situ Composites Fabricated by Stir Casting, Mater. Sci. Eng. A, 2015, 625, p 357–368.10.1016/j.msea.2014.12.033 ↗
36. Y. Yin, J. Zhang, J. Gao, Z. Zhang, Q. Han, and Z. Zan, Laser Powder Bed Fusion of Ni-Based Hastelloy X superalloy: Microstructure, Anisotropic Mechanical Properties and Strengthening Mechanisms, Mater. Sci. Eng. A, 2021, 827, p 142076.10.1016/j.msea.2021.142076 ↗
37. B. AlMangour, Y.-K. Kim, D. Grzesiak, and K.-A. Lee, Novel TiB2-Reinforced 316L Stainless Steel Nanocomposites with Excellent Room- and high-Temperature yield Strength Developed by Additive Manufacturing, Compos. B, 2019, 156, p 51–63.10.1016/j.compositesb.2018.07.050 ↗
38. K. Ma, T. Hu, H. Yang, T. Topping, A. Yousefiani, E.J. Lavernia, and J.M. Schoenung, Coupling of Dislocations and Precipitates: Impact on the Mechanical Behavior of Ultrafine Grained Al-Zn-Mg Alloys, Acta Mater., 2016, 103, p 153–164.10.1016/j.actamat.2015.09.017 ↗
39. H. Choe, S. Abkowitz, S.M. Abkowitz, and D.C. Dunand, Mechanical Properties of Ti–W Alloys Reinforced with TiC Particles, Mater. Sci. Eng. A, 2008, 485(1), p 703–710.10.1016/j.msea.2008.01.069 ↗
40. D. Tomus, Y. Tian, P.A. Rometsch, M. Heilmaier, and X. Wu, Influence of Post Heat Treatments on Anisotropy of Mechanical Behaviour and Microstructure of Hastelloy-X Parts Produced by Selective Laser Melting, Mater. Sci. Eng. A, 2016, 667, p 42–53.10.1016/j.msea.2016.04.086 ↗
41. F. Wang, Mechanical Property Study on Rapid Additive Layer Manufacture Hastelloy® X Alloy by Selective Laser Melting Technology, Int. J. Adv. Manuf. Tech., 2012, 58(5), p 545–551.10.1007/s00170-011-3423-2 ↗
42. X. Zhang, H. Xu, Z. Li, A. Dong, D. Du, L. Lei, G. Zhang, D. Wang, G. Zhu, and B. Sun, Effect of the Scanning Strategy on Microstructure and Mechanical Anisotropy of Hastelloy X Superalloy Produced by Laser Powder Bed Fusion, Mater Charact, 2021, 173, 110951.10.1016/j.matchar.2021.110951 ↗