Enhancing Strength–Ductility Balance in Ferritic Stainless Steel via High-Temperature Annealing and Subsequent Rolling
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. G. Zu, Y. Lu, Y. Yan, X. Zhang, J. Zhao, W. Du, X. Ran, and Z. Jiang, Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel, Met. Mater. Int., 2020, 26, p 248–259.10.1007/s12540-019-00316-0 ↗
2. L. Tanure, C.M. de Alcântara, D.B. Santos, T.R. de Oliveira, B.M. Gonzalez, and K. Verbeken, Microstructural Characterization and Mechanical Behavior During Recrystallization Annealing of Nb-Stabilized type ASTM 430 and Nb-Ti-Stabilized ASTM 439 Ferritic Stainless Steels, J. Market. Res., 2019, 8(5), p 4048–4065.
3. X. Sun, X. Ma, J. Li, L. Ma, M. Zhang, and J. Zhao, The Effect of Cold Rolling Reduction Ratio on the Microstructure and Mechanical Properties of Ferritic Stainless Steel 430, Int. J. Adv. Manuf. Technol., 2023, 126, p 1–13.10.1007/s00170-023-11159-w ↗
4. M. Okayasu and T. Shigeoka, Effect of Microstructural Characteristics on Mechanical Properties of Ferritic Stainless Steel, J. Mater. Eng. Perform., 2019, 28, p 6771–6778.10.1007/s11665-019-04426-z ↗
5. L. Meng, W. Li, Q. Shi, L. Zheng, J. Ma, L. Yin, W. Liang, and H. Lu, Dependence of Strengthing and Toughening on Retained Austenite of Quenched and Partitioned AISI 430 Ferritic Stainless Steel, Mater. Sci. Eng. A, 2023, 872, p 144998.10.1016/j.msea.2023.144998 ↗
6. F. Gao, Y. Chen, Q. Zhu, Y. Nan, S. Tang, Z. Cai, F. Zhang, W. Xue, X. Cai, and F. Yu, Formation of Recrystallization Texture and its Effect on Deep Drawability for High-Purified Ferritic Stainless Steel by Two Step Cold Rolling, Mater. Des., 2023, 226, p 111679.10.1016/j.matdes.2023.111679 ↗
7. L. Meng, H. Lu, W. Li, H. Guo, J. Tian, and W. Liang, High Strength and Plasticity of AISI 430 Ferritic Stainless Steel Achieved by a Recrystallization Annealing Before Quenching and Partitioning Process, Mater. Sci. Eng. A, 2021, 814, p 141191.10.1016/j.msea.2021.141191 ↗
8. J. Fu, F. Li, J. Sun, and Y. Wu, Texture, Orientation, and Mechanical Properties of Ti-Stabilized Fe-17Cr Ferritic Stainless Steel, Mater. Sci. Eng. A, 2018, 738, p 335–343.10.1016/j.msea.2018.09.108 ↗
9. Y. Bai, T. He, and Y. Liu, Effects of Sn Microalloying on Cold Rolling and Recrystallization Textures and Microstructure of a Ferritic Stainless Steel, Mater Charact, 2018, 137, p 142–150.10.1016/j.matchar.2018.01.022 ↗
10. F. Gao, F.-X. Yu, R.D.K. Misra, X.-J. Zhang, S.-M. Zhang, and Z.-Y. Liu, Microstructure, Texture, and Deep Drawability Under Two Different Cold-Rolling Processes in Ferritic Stainless Steel, J. Mater. Eng. Perform., 2015, 24, p 3862–3880.10.1007/s11665-015-1689-5 ↗
11. F. Gao, Z.Y. Liu, H.T. Liu, S.M. Zhang, A.M. Dong, Y.-S. Hao, and G.-D. Wang, Development of γ-Fibre Recrystallisation Texture in Medium–Chromium Ferritic Stainless Steels, Mater. Sci. Technol., 2014, 30(14), p 1735–1741.10.1179/1743284713Y.0000000462 ↗
12. J. Fu, K. Cui, F. Li, J. Wang, and Y. Wu, Texture and Anisotropic Mechanical Properties of Ferritic Stainless Steel Stabilized with Ti and Nb, Mater Charact, 2020, 159, p 110027.10.1016/j.matchar.2019.110027 ↗
13. Y. Kang, W.M. Mao, Y.J. Chen, J. Jing, and M. Cheng, Influence of Nb Content on Grain Size and Mechanical Properties of 18 wt.% Cr Ferritic Stainless Steel, Mater. Sci. Eng. A, 2016, 677, p 453–464.10.1016/j.msea.2016.09.080 ↗
14. X. Ma, J. Zhao, W. Du, and Z. Jiang, Effects of Cold Rolling and Annealing on the Ridging Behaviour of Ferritic Stainless Steel, Int. J. Adv. Manuf. Technol., 2020, 107, p 4823–4836.10.1007/s00170-020-05367-x ↗
15. M. Li, Z. Wang, and X. Chen, Effects of Initial Equiaxed Crystal Ratio in As-Cast Slab on Texture Evolution and Formability of Ferritic Stainless Steel, J. Mater. Eng. Perform., 2021, 30, p 379–389.10.1007/s11665-020-05441-1 ↗
16. J. Han, H. Li, Z. Zhu, L. Jiang, H. Xu, and L. Ma, Effects of Processing Optimisation on Microstructure, Texture, Grain Boundary and Mechanical Properties of Fe–17Cr Ferritic Stainless Steel Thick Plates, Mater. Sci. Eng. A, 2014, 616, p 20–28.10.1016/j.msea.2014.07.107 ↗
17. H. Li, P. Chen, Z. Wang, F. Zhu, R. Song, and Z. Zheng, Tensile Properties, Microstructures and Fracture Behaviors of an Al-Zn-Mg-Cu Alloy During Ageing After Solution Treating and Cold-Rolling, Mater. Sci. Eng. A, 2019, 742, p 798–812.10.1016/j.msea.2018.03.098 ↗
18. P. Fajfar, A.Š Lah, J. Kraner, and G. Kugler, Asymmetric Rolling Process, Mater. Geoenviron., 2017, 64(3), p 151–160.10.1515/rmzmag-2017-0014 ↗
19. A. Uniwersał, M. Wróbel, K. Wierzbanowski, S. Wroński, and A. Baczmański, Mechanical and Microstructural Characteristics of Polycrystalline Copper Rolled Asymmetrically to a High Deformation Level, Mater Charact, 2019, 148, p 214–223.10.1016/j.matchar.2018.12.017 ↗
20. A. Amininejad, R. Jamaati, and S.J. Hosseinipour, Achieving Superior Strength and High Ductility in AISI 304 Austenitic Stainless Steel via Asymmetric Cold Rolling, Mater. Sci. Eng. A, 2019, 767, p 138433.10.1016/j.msea.2019.138433 ↗
21. A. Kazemi-Navaee, R. Jamaati, and H.J. Aval, Asymmetric Cold Rolling of AA7075 Alloy: The Evolution of Microstructure, Crystallographic Texture, and Mechanical Properties, Mater. Sci. Eng. A, 2021, 824, p 141801.10.1016/j.msea.2021.141801 ↗
22. Y.G. Ko, I. Widiantara, and K. Hamad, On the Considerability of DSR (Differential Speed Rolling) as a Severe Plastic Deformation Method, Adv. Eng. Mater., 2017, 19(3), p 1600722.10.1002/adem.201600722 ↗
23. K. Hamad and Y.G. Ko, Effect of Roll Speed Ratio on Microstructure Evolution and Mechanical Properties of 0.18 wt.% Carbon Steel Deformed by Differential Speed Rolling, Mater. Lett., 2015, 160, p 213–217.10.1016/j.matlet.2015.07.127 ↗
24. K. Hamad, R.B. Megantoro, and Y.G. Ko, Microstructure and Texture Evolution in Low Carbon Steel Deformed by Differential Speed Rolling (DSR) Method, J. Mater. Sci., 2014, 49, p 6608–6619.10.1007/s10853-014-8280-6 ↗
25. S. Tamimi, J.J. Gracio, A.B. Lopes, S. Ahzi, and F. Barlat, Asymmetric Rolling of Interstitial Free Steel Sheets: Microstructural Evolution and Mechanical Properties, J. Manuf. Process., 2018, 31, p 583–592.10.1016/j.jmapro.2017.12.014 ↗
26. H.-H. Lu, W.-Q. Li, L.-Y. Du, H.-K. Guo, W. Liang, W.-G. Zhang, and Z.-G. Liu, The Effects of Martensitic Transformation and (Fe, Cr) 23C6 Precipitation on the Properties of Transformable Ferritic Stainless Steel, Mater. Sci. Eng. A, 2019, 754, p 502–511.10.1016/j.msea.2019.03.110 ↗
27. G. Luo, H. Li, Y. Li, and J. Mo, Microstructures and Properties of a Low-Carbon-Chromium Ferritic Stainless Steel Treated by a Quenching and Partitioning Process, Materials, 2019, 12(10), p 1704.10.3390/ma12101704 ↗
28. K. Kimura, K. Ushioda, E. Ishimaru, and A. Takahashi, Role of Hard Martensite Phase Prior to Cold-Rolling on Microstructure Evolution After Annealing in Ferritic Stainless Steel, Mater. Sci. Eng. A, 2016, 663, p 86–97.10.1016/j.msea.2016.03.078 ↗
29. F.J. Humphreys and M. Hatherly, Recrystallization and related annealing phenomena, Elsevier, New York, 2012.
30. M. Moghaddam, A. Zarei-Hanzaki, M.H. Pishbin, A.H. Shafieizad, and V.B. Oliveira, Characterization of the Microstructure, Texture and Mechanical Properties of 7075 Aluminum Alloy in Early Stage of Severe Plastic Deformation, Mater Charact, 2016, 119, p 137–147.10.1016/j.matchar.2016.07.026 ↗
31. P.O. Malta, D.S. Alves, A.O.V. Ferreira, I.D. Moutinho, C.A.P. Dias, and D.B. Santos, Static Recrystallization Kinetics and Crystallographic Texture of Nb-Stabilized Ferritic Stainless Steel Based on Orientation Imaging Microscopy, Metall. Mater. Trans. A, 2017, 48, p 1288–1309.10.1007/s11661-016-3935-3 ↗
32. H. Liu, H. Li, C. Liu, and J. Wu, Effect of Rolling Reduction on Microstructure and Formability of a Ferritic Stainless Steel, J. Mater. Eng. Perform., 2023, 33, p 1–10.
33. H. Hassanpour, R. Jamaati, and S.J. Hosseinipour, Effect of Gradient Microstructure on the Mechanical Properties of Aluminum Alloy, Mater Charact, 2021, 174, p 111023.10.1016/j.matchar.2021.111023 ↗
34. F. Yousefpour, R. Jamaati, and H.J. Aval, Synergistic Effects of Hybrid (HA+ Ag) Particles and Friction Stir Processing in the Design of a High-Strength Magnesium Matrix Bio-nano Composite with an Appropriate Texture for Biomedical Applications, J. Mech. Behav. Biomed. Mater., 2022, 125, p 104983.10.1016/j.jmbbm.2021.104983 ↗
35. W. Gong, K. Aizawa, S. Harjo, R. Zheng, T. Kawasaki, J. Abe, T. Kamiyama, and N. Tsuji, Deformation Behavior of as-Cast and as-Extruded Mg97Zn1Y2 Alloys During Compression, as Tracked by In Situ Neutron Diffraction, Int. J. Plast., 2018, 111, p 288–306.10.1016/j.ijplas.2018.08.001 ↗
36. F. Yousefpour, R. Jamaati, and H.J. Aval, Investigation of Microstructure, Crystallographic Texture, and Mechanical Behavior of Magnesium-Based Nanocomposite Fabricated via Multi-pass FSP for Biomedical Applications, J. Mech. Behav. Biomed. Mater., 2022, 125, p 104894.10.1016/j.jmbbm.2021.104894 ↗
37. M. Zarei, S. Nourouzi, R. Jamaati, I.G. Cano, S. Dosta, and M. Sarret, Water-Assisted Crystallization of Nanoporous Tin Oxide Formed by Anodic Oxidation on Cold Sprayed Tin Coating, J. Alloy. Compd., 2021, 876, p 160207.10.1016/j.jallcom.2021.160207 ↗
38. C.-Z. Lu, Z. Fang, and J.-Y. Li, Influence of Differential Speed Rolling Ratio on the Ridging Behavior of Ultra Purified 17% Cr Ferritic Stainless Steel, Mater Charact, 2018, 135, p 257–264.10.1016/j.matchar.2017.11.049 ↗
39. C.-Z. Lu, J.-Y. Li, and Z. Fang, Effects of Asymmetric Rolling Process on Ridging Resistance of Ultra-purified 17% Cr Ferritic Stainless Steel, Int. J. Miner. Metall. Mater., 2018, 25, p 216–225.10.1007/s12613-018-1564-0 ↗
40. R.P. Siqueira, H.R.Z. Sandim, and T.R. Oliveira, Texture Evolution in Nb-Containing Ferritic Stainless Steels During Secondary Recrystallization, Mater. Sci. Eng. A, 2008, 497(1–2), p 216–223.10.1016/j.msea.2008.07.002 ↗
41. C. Zhang, Z. Liu, and G. Wang, Effects of Hot Rolled Shear Bands on Formability and Surface Ridging of an Ultra Purified 21% Cr Ferritic Stainless Steel, J. Mater. Process. Technol., 2011, 211(6), p 1051–1059.10.1016/j.jmatprotec.2011.01.005 ↗
42. S. Kobayashi, W. Yang, Y. Tomobe, R. Okada, and S. Tsurekawa, Low-Angle Boundary Engineering for Improving High-Cycle Fatigue Property of 430 Ferritic Stainless Steel, J. Mater. Sci., 2020, 55, p 9273–9285.10.1007/s10853-020-04555-0 ↗
43. G.K. Williamson and R.E. Smallman III., Dislocation Densities in Some Annealed and Cold-Worked Metals from Measurements on the X-ray Debye-Scherrer Spectrum, Phil. Mag., 1956, 1(1), p 34–46.10.1080/14786435608238074 ↗
44. V. Shivam, D. Bhuyan, N.K. Mukhopadhyay, and R. Manna, Microstructural Refinement and Mechanical Properties of Ferritic Stainless Steel Processed by Equal-Channel Angular Pressing, J. Mater. Eng. Perform., 2020, 29, p 6818–6830.10.1007/s11665-020-05131-y ↗
45. N. Saeidi, F. Ashrafizadeh, B. Niroumand, M.R. Forouzan, and F. Barlat, Examination and Modeling of Void Growth Kinetics in Modern High Strength Dual Phase Steels During Uniaxial Tensile Deformation, Mater. Chem. Phys., 2016, 172, p 54–61.10.1016/j.matchemphys.2015.12.059 ↗
46. C.-N. Li, F.-Q. Ji, G. Yuan, J. Kang, R.D.K. Misra, and G.-D. Wang, The Impact of Thermo-Mechanical Controlled Processing on Structure-Property Relationship and Strain Hardening Behavior in Dual-Phase Steels, Mater. Sci. Eng. A, 2016, 662, p 100–110.10.1016/j.msea.2016.03.055 ↗
47. Y.G. Ko, C.W. Lee, S. Namgung, and D.H. Shin, Strain Hardening Behavior of Nanostructured Dual-Phase Steel Processed by Severe Plastic Deformation, J. Alloy. Compd., 2010, 504, p S452–S455.10.1016/j.jallcom.2010.02.109 ↗
48. Y. Mazaheri, A. Kermanpur, A. Najafizadeh, and N. Saeidi, Effects of Initial Microstructure and Thermomechanical Processing Parameters on Microstructures and Mechanical Properties of Ultrafine Grained Dual Phase Steels, Mater. Sci. Eng. A, 2014, 612, p 54–62.10.1016/j.msea.2014.06.031 ↗