A Review of the Latest Welding Technologies for Metallic Components Produced by Additive Manufacturing Processes
Source abstract
Abstract
Abstract Welding processes for metal components produced by additive manufacturing are becoming a crucial task, especially in the case of fabricating large and complex structures. This review aims to introduce the latest welding methodologies for printed parts as well as addressing their prospects. The main welding technologies that are covered in this review include (i) arc welding (ii) laser and electron beam welding, (iii) friction stir welding. In terms of metallic systems, the focus is on both commonly used alloys, including Ti-base alloys, stainless steels, Al-base alloys and Ni-base superalloys, and special material systems, such as high-entropy alloys. This review also aims to demonstrate the feasibility of different welding technologies and to delineate the appropriate set of welding parameters (welding window) that provide optimum welding parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. S.S. Babu and R. Goodridge, Additive Manufacturing, Guest Editorial, Mater. Sci. Technol., 2015, 31(8), p 881. https://doi.org/10.1179/0267083615z.00000000092910.1179/0267083615z.000000000929 ↗
2. E. Brandl, U. Heckenberger, V. Holzinger, and D. Buchbinder, Additive Manufactured AlSi10Mg Samples Using Selective Laser Melting (SLM): Microstructure, High Cycle Fatigue and Fracture Behavior, Mater. Des., 2012, 34, p 159. https://doi.org/10.1016/j.matdes.2011.07.06710.1016/j.matdes.2011.07.067 ↗
3. D.D. Gu, W. Meiners, K. Wissenbach, and R. Poprawe, Laser Additive Manufacturing of Metallic Components: Materials, Processes and Mechanisms, Int. Mater. Rev., 2012, 57(3), p 133. https://doi.org/10.1179/1743280411y.000000001410.1179/1743280411y.0000000014 ↗
4. W.E. Frazier, Metal Additive Manufacturing: A Review, J. Mater. Eng. Perform., 2014, 23(6), p 1917. https://doi.org/10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
5. D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann, Additive Manufacturing of Metals, Acta Mater., 2016, 117, p 371. https://doi.org/10.1016/j.actamat.2016.07.01910.1016/j.actamat.2016.07.019 ↗
6. B. Maxim, T. Ron, Shirizly, and E. Aghion, Effect of Microstructure Modifications on Stress Corrosion Endurance of 15-5 PH Stainless Steel Formed by Wire Laser Additive Manufacturing (WLAM), Metals, 13, 1748 (2023). https://doi.org/10.3390/met1310174810.3390/met13101748 ↗
7. B. Bhushan and M. Caspers, An Overview of Additive Manufacturing (3D Printing) for Microfabrication, Microsyst. Technol., 2017, 23, 117. https://doi.org/10.1007/s00542-017-3342-810.1007/s00542-017-3342-8 ↗
8. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang, Additive Manufacturing of Metallic Components—Process, Structure and Properties, Prog. Mater. Sci., 2018, 92, p 112. https://doi.org/10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
9. S.Z. Ajabshir, C. Hare, D. Sofia, D. Barletta, and M. Poletto, Investigating the Effect of Temperature on Powder Spreading Behaviour in Powder Bed Fusion Additive Manufacturing Process by Discrete Element Method, Powder Technol., 2024, 436, 119468. https://doi.org/10.1016/j.powtec.2024.11946810.1016/j.powtec.2024.119468 ↗
10. M. Nahmany, Electron Beam Welding of Additive Manufactured AlSil0Mg Alloy: Optimal Welding Parameters, Microstructure of the Weld Metal and Mechanical Properties of Joints, Ph.D. Thesis, Supervised by Prof. N. Frage, Prof. A. Stern, Prof. E. Aghion. Ben Gurion Univ. of the Negev, Israel, 2018
11. L.E. Murr, E. Martinez, K.N. Amato, S.M. Gaytan, J. Hernandez, D.A. Ramirez, P.W. Shindo, F. Medina, and R.B. Wicker, Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies, Mater. Sci. Technol., 2012, 28(1), p 1–14. https://doi.org/10.1016/s1005-0302(12)60016-410.1016/s1005-0302(12)60016-4 ↗
12. D. Clark, M.T. Whittaker, and M.R. Bache, Microstructural Characterization of a prototype Titanium Alloy Structure Processed Via Direct Laser Deposition (DLD), Metall. Mater. Trans. B, 2012 https://doi.org/10.1007/s11663-011-9599-x10.1007/s11663-011-9599-x ↗
13. L. Thijs, K. Kempen, J.P. Kruth, and J.V. Humbeeck, Fine-Structured Aluminium Products with Controllable Texture by Selective Laser Melting of Pre-Alloyed AlSi10Mg Powder, Acta Mater., 2013, 61, p 1809. https://doi.org/10.1016/j.actamat.2012.11.05210.1016/j.actamat.2012.11.052 ↗
14. B. A. Fulcher, D. K. Leigh, and T. J. Watt, Comparison of AlSi10Mg and Al 6061 processed through DMLS, Proceedings of the 24th International Solid Freeform Fabrication Symposium—University of Texas in Austin, Texas, August 2014. https://doi.org/10.26153/tsw/1569510.26153/tsw/15695 ↗
15. Y. Brif, M. Thomas, and I. Todd, The Use of High-Entropy Alloys in Additive Manufacturing, Scr. Mater., 2015, 99, p 93. https://doi.org/10.1016/j.scriptamat.2014.11.03710.1016/j.scriptamat.2014.11.037 ↗
16. T. Ron, A. Shirizly, and E. Aghion, Additive Manufacturing Technologies of High Entropy Alloys (HEA): Review and Prospects, Materials, 2023, 16(6), p 2454. https://doi.org/10.3390/ma1606245410.3390/ma16062454 ↗
17. T. Ron, A. Leon, V. Popov, E. Strokin, D. Eliezer, A. Shirizly, and E. Aghion, Synthesis of Refractory High-Entropy Alloy WTaMoNbV by Powder Bed Fusion Process Using Mixed Elemental Alloying Powder, Materials, 2022, 15(12), p 4043. https://doi.org/10.3390/ma1512404310.3390/ma15124043 ↗
18. Y.H. Zhou, W.P. Li, D.W. Wang, L. Zhang, K. Ohara, J. Shen, T. Ebel, and M. Yan, Selective Laser Melting Enabled Additive Manufacturing of Ti-22Al-25Nb Intermetallic: Excellent Combination of Strength and Ductility, and Unique Microstructural Features Associated, Acta Mater., 2019, 173, p 117–129. https://doi.org/10.1016/j.actamat.2019.05.00810.1016/j.actamat.2019.05.008 ↗
19. N. Haghdadi, M. Laleh, M. Moyle, and S. Primig, Additive Manufacturing of Steels: A Review of Achievements and Challenges, J. Mater. Sci., 2021, 56, p 64–107. https://doi.org/10.1007/s10853-020-05109-010.1007/s10853-020-05109-0 ↗
20. D.A. Ramirez, L.E. Murr, E. Martinez, D.H. Hernandez, J.L. Martinez, B.I. Machado, and R.B. Wicker, Novel precipitate-Microstructural Architecture Developed in the Fabrication of Solid Copper Components by Additive Manufacturing Using Electron Beam Melting, Acta Mater., 2011, 59(10), p 4088–4099. https://doi.org/10.1016/j.actamat.2011.03.03310.1016/j.actamat.2011.03.033 ↗
21. Y. Kok, X.P. Tan, P. Wang, M.L.S. Nai, N.H. Loh, E. Liu, and S.B. Tor, Anisotropy and Heterogeneity of Microstructure and Mechanical Properties in Metal Additive Manufacturing: A Critical Review, Mater. Des., 2018, 139, p 565–586. https://doi.org/10.1016/j.matdes.2017.11.02110.1016/j.matdes.2017.11.021 ↗
22. B.E. Carroll, T.A. Palmer, and A.M. Beese, Anisotropic Tensile Behavior of Ti-6Al-4V Components Fabricated with Directed Energy Deposition Additive Manufacturing, Acta Mater., 2015, 87, p 309–320. https://doi.org/10.1016/j.actamat.2014.12.05410.1016/j.actamat.2014.12.054 ↗
23. C. Wang, P. Zhu, F. Wang, Y.H. Lu, and T. Shoji, Anisotropy of Microstructure and Corrosion Resistance of 316L Stainless Steel Fabricated by Wire and Arc Additive Manufacturing, Corros. Sci., 2022, 206, 110549. https://doi.org/10.1016/j.corsci.2022.11054910.1016/j.corsci.2022.110549 ↗
24. D. Xie, F. Lv, Y. Yang, L. Shen, Z. Tian, C. Shuai, and J. Zhao, A Review on Distortion and Residual Stress in Additive Manufacturing, Chin. J. Mech. Eng. Addit. Manuf. Front., 2022, 1(3), 100039. https://doi.org/10.1016/j.cjmeam.2022.10003910.1016/j.cjmeam.2022.100039 ↗
25. S.G. Chen, H.J. Gao, Y.D. Zhang, Q. Wu, Z.H. Gao, and X. Zhou, Review on residual Stresses in Metal Additive Manufacturing: Formation Mechanisms, Parameter Dependencies, Prediction and Control Approaches, J. Mater. Res. Technol., 2022, 17, p 2950–2974. https://doi.org/10.1016/j.jmrt.2022.02.05410.1016/j.jmrt.2022.02.054 ↗
26. J. Gockel, L. Sheridan, B. Koerper, and B. Whip, The Influence of Additive Manufacturing Processing Parameters on Surface Roughness and Fatigue Life, Int. J. Fatigue, 2019, 124, p 380–388. https://doi.org/10.1016/j.ijfatigue.2019.03.02510.1016/j.ijfatigue.2019.03.025 ↗
27. B. Zhang, S. Liu, and Y.C. Shin, In-process Monitoring of Porosity During Laser Additive Manufacturing Process, Addit. Manuf., 2019, 28, p 497–505. https://doi.org/10.1016/j.addma.2019.05.03010.1016/j.addma.2019.05.030 ↗
28. M. Bassis, T. Ron, A. Leon, A. Kotliar, R. Kotliar, A. Shirizly, and E. Aghion, The Influence of Intralayer Porosity and Phase Transition on Corrosion Fatigue of Additively Manufactured 316L Stainless Steel Obtained by Direct Energy Deposition Process, Materials, 2022, 15, p 5481. https://doi.org/10.3390/ma1516548110.3390/ma15165481 ↗
29. T. Hauser, R.T. Reisch, P.P. Breese, B.S. Lutz, M. Pantano, Y. Nalam, and A.F. Kaplan, Porosity in Wire Arc Additive Manufacturing of Aluminium Alloys, Addit. Manuf., 2021, 41, 101993. https://doi.org/10.1016/j.addma.2021.10199310.1016/j.addma.2021.101993 ↗
30. T. Wang, Y.Y. Zhu, S.Q. Zhang, H.B. Tang, and H.M. Wang, Grain morphology Evolution Behavior of Titanium Alloy Components During Laser Melting Deposition Additive Manufacturing, J. Alloys Compd., 2015, 632, p 505–513. https://doi.org/10.1016/j.jallcom.2015.01.25610.1016/j.jallcom.2015.01.256 ↗
31. S. Wei, P. Wang, L. Zhang, and U. Ramamurty, Grain Morphologies in Additively Manufactured Alloys: from Solidification Fundamentals to Advanced Microstructure Control, J. Mater. Sci. Technol., 2025, 235, p 133–145. https://doi.org/10.1016/j.jmst.2025.02.03310.1016/j.jmst.2025.02.033 ↗
32. N. Raghavan, R. Dehoff, S. Pannala, S. Simunovic, M. Kirka, J. Turner, N. Carlson, and S.S. Babu, Numerical Modeling of Heat-Transfer and the Influence of Process Parameters on Tailoring the Grain Morphology of IN718 in Electron Beam Additive Manufacturing, Acta Mater., 2016, 112, p 303–314. https://doi.org/10.1016/j.actamat.2016.03.06310.1016/j.actamat.2016.03.063 ↗
33. P. Mohyla, J. Hajnys, K. Sternadelová, L. Krejčí, M. Pagáč, K. Konečná, and P. Krpec, Analysis of Welded Joint Properties on an AISI316L Stainless Steel Tube Manufactured by SLM Technology, Materials, 2020, 13(19), p 4362. https://doi.org/10.3390/ma1319436210.3390/ma13194362 ↗
34. T.M. Mower and M.J. Long, Mechanical Behavior of Additive Manufactured, Powder-Bed Laser-Fused Materials, Mater. Sci. Eng. A, 2016, 651, p 198. https://doi.org/10.1016/j.msea.2015.10.06810.1016/j.msea.2015.10.068 ↗
35. M. Braun, J. Schubnell, A. Sarmast, H. Subramanian, L. Reissig, F. Altenhöner, and S. Ehlers, Mechanical Behavior of Additively and Conventionally Manufactured 316L Stainless Steel Plates Joined by Gas Metal Arc Welding, J. Mater. Res. Technol., 2023, 24, p 1692. https://doi.org/10.1016/j.jmrt.2023.03.08010.1016/j.jmrt.2023.03.080 ↗
36. EN 10028-7; Flat Products Made of Steels for Pressure Purposes—Part 7: Stainless Steels. CEN: Geneva, Switzerland, 2016. https://doi.org/10.3403/0192123610.3403/01921236 ↗
37. H. Selmi, J. Brousseau, G. Caron-Guillemette, S. Goulet, J. Desjardins, and C. Belzile, Weldability of 316L Parts Produced by Metal Additive Manufacturing, J. Manuf. Mater. Process., 2023, 7(2), 71. https://doi.org/10.3390/jmmp702007110.3390/jmmp7020071 ↗
38. P. Mohyla, J. Hajnys, L. Gembalová, A. Zapletalová, and P. Krpec, Influence of Heat Treatment of Steel AISI316L Produced by the Selective Laser Melting Method on the Properties of Welded Joint, Materials, 2022, 15(5), p 1690. https://doi.org/10.3390/ma1505169010.3390/ma15051690 ↗
39. C.İ. Çalışkan, H.M. Khan, G. Özer, S. Waqar, and İ. Tütük, The Effect of Conformal Cooling Channels on Welding Process in Parts Produced by Additive Manufacturing, Laser Powder Bed Fusion, J. Manuf. Process., 2022, 83, p 705. https://doi.org/10.1016/j.jmapro.2022.09.03610.1016/j.jmapro.2022.09.036 ↗
40. J. P. Järvinen, Welding of additively manufactured stainless steel parts: Comparative study between sheet metal and selective laser melted parts, thesis, 2014. https://lutpub.lut.fi/handle/10024/102212
41. M. Harraz, N. El-Mahallawy, K. Abd Elghany, M. Schleser, H. Palkowski, and A. Klingner, Characterization of 3D Printed Stainless Steel SS316L Powders Joined by TIG-, Plasma-and Laser Welding, Int. Conf. Aerospace Sci. Aviat. Technol., 2018, 17, p 1–8. https://doi.org/10.21608/asat.2018.2237710.21608/asat.2018.22377 ↗
42. M. Sen and M. Kurt, Laser and TIG Welding of Additive Manufactured Ti-6Al-4V Parts, Mater. Test., 2022, 64(5), p 656. https://doi.org/10.1515/mt-2021-216510.1515/mt-2021-2165 ↗
43. M. Gill, E. Terry, Y. Abdi, S. Hawkes, J. Rindler, D. Schick, and E.D. Herderick, Joining Technologies for Metal Additive Manufacturing in the Energy Industry, JOM, 2020, 72, 4214. https://doi.org/10.1007/s11837-020-04441-910.1007/s11837-020-04441-9 ↗
44. X.L. Gao, L.J. Zhang, J. Liu, and J.X. Zhang, A Comparative Study of Pulsed Nd: YAG Laser Welding and TIG Welding of Thin Ti6Al4V Titanium Alloy Plate, Mater. Sci. Eng. A, 2013, 559, 14. https://doi.org/10.1016/j.msea.2012.06.01610.1016/j.msea.2012.06.016 ↗
45. M. Madeja, M. Karoluk, and I. Smolina, Welding of Ti-5Al-5Mo-5 V-1Cr-1Fe Parts Manufactured in the Electron Beam Melting, Mater. Des., 2020, 195, 108969. https://doi.org/10.1016/j.matdes.2020.10896910.1016/j.matdes.2020.108969 ↗
46. R. Nunes, K. Faes, W. De Waele, A. Simar, W. Verlinde, M. Lezaack, and J. Arnhold, A Review on the Weldability of Additively Manufactured Aluminium Parts by Fusion and Solid-State Welding Processes, Metals, 2023, 13(10), p 1724. https://doi.org/10.3390/met1310172410.3390/met13101724 ↗
47. C. Zhang, Y. Bao, H. Zhu, X. Nie, W. Zhang, S. Zhang, and X. Zeng, A comparison Between Laser and TIG Welding of Selective Laser Melted AlSi10Mg, Opt. Laser Technol., 2019, 120, 105696. https://doi.org/10.1016/j.optlastec.2019.10569610.1016/j.optlastec.2019.105696 ↗
48. M. Nahmany, A. Stern, I. Benishti, I. Rosenthal, and N. Frage, Electron Beam Welding of AlSil0Mg Workpieces Produced by Selected Laser Melting Additive Manufacturing Technology, Addit. Manuf., 2015, 8, p 63. https://doi.org/10.1016/j.addma.2015.08.00210.1016/j.addma.2015.08.002 ↗
49. M. Nahmany, Y. Hadad, E. Aghion, A. Stern, and N. Frage, Microstructural Assessment and Mechanical Properties of Electron Beam Welding of AlSi10Mg Specimens Fabricated by Selective Laser Melting, J. Mater. Process. Technol., 2019, 270, p 228. https://doi.org/10.1016/j.jmatprotec.2019.02.02510.1016/j.jmatprotec.2019.02.025 ↗
50. D. Wu, L. Cui, X. Wu, X. Guo, W. Shao, Z. Tan, and D. He, Cold Metal Transfer Welding of AlSi7Mg Alloy Sheets Prepared by Selective Laser Melting, J. Manuf. Process., 2022, 84, p 282. https://doi.org/10.1016/j.jmapro.2022.10.01310.1016/j.jmapro.2022.10.013 ↗
51. S. Takhti, M. Reihanian, and A. Ashrafi, Microstructure Characterization and Mechanical Properties of Gas Tungsten Arc Welded Cast A356 Alloy, Nonferrous Met. Soc. China, 2015, 25(7), p 2137. https://doi.org/10.1016/s1003-6326(15)63825-010.1016/s1003-6326(15)63825-0 ↗
52. H. Yu, F. Li, J. Yang, J. Shao, Z. Wang, and X. Zeng, Investigation on Laser Welding of Selective Laser Melted Ti-6Al-4V Parts: Weldability, Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2018, 712, p 20. https://doi.org/10.1016/j.msea.2017.11.08610.1016/j.msea.2017.11.086 ↗
53. P.O. Omoniyi, R.M. Mahamood, N. Arthur, S. Pityana, S. Skhosane, Y. Okamoto, and E.T. Akinlabi, Joint Integrity Evaluation of Laser Beam Welded Additive Manufactured Ti6Al4V Sheets, Sci. Rep., 2022, 12(1), p 4062. https://doi.org/10.1038/s41598-022-08122-210.1038/s41598-022-08122-2 ↗
54. T. Rautio, A. Hamada, J. Mäkikangas, M. Jaskari, and A. Järvenpää, Laser Welding of Selective Laser Melted Ti6Al4V: Microstructure and Mechanical Properties, Mater. Today Proc., 2020, 28, p 907–911. https://doi.org/10.1016/j.matpr.2019.12.32210.1016/j.matpr.2019.12.322 ↗
55. V. Cain, L. Thijs, J. Van Humbeeck, B. Van Hooreweder, and R. Knutsen, Crack Propagation and Fracture Toughness of Ti6Al4V Alloy Produced by Selective Laser Melting, Addit. Manuf., 2015, 5, p 68. https://doi.org/10.1016/j.addma.2014.12.00610.1016/j.addma.2014.12.006 ↗
56. M. Xu, Y. Chen, T. Zhang, H. Deng, and D. Ji, Effects of Solution Treatment on Laser Welding of Ti-6Al-4V Alloy Plate Produced Through Wire Arc Additive Manufacturing, Metals, 2020, 10(10), p 1310. https://doi.org/10.3390/met1010131010.3390/met10101310 ↗
57. B. Tavlovich, A. Shirizly, and R. Katz, EBW, and LBW of Additive Manufactured Ti6Al4V Products, Weld. J., 2018, 97(6), p 179S. https://doi.org/10.29391/2018.97.01610.29391/2018.97.016 ↗
58. W.W. Wits and J.J. Becker, Laser Beam Welding of titanium additive Manufactured Parts, Procedia CIRP, 2015, 28, p 70. https://doi.org/10.1016/j.procir.2015.04.01310.1016/j.procir.2015.04.013 ↗
59. M. Mokhtari, P. Pommier, Y. Balcaen, and J. Alexis, Laser Welding of AISI 316L Stainless Steel Produced by Additive Manufacturing or by Conventional Processes, J. Manuf. Mater. Process., 2021, 5(4), 136. https://doi.org/10.3390/jmmp504013610.3390/jmmp5040136 ↗
60. T. Rautio, J. Jalava-Kanervio, J. Kumpula, J. Mäkikangas, and A. Järvenpää, Microstructure and Mechanical Properties of Laser Butt Welded Laser Powder Bed Fusion Manufactured and Sheet Metal 316L Parts, Key Eng. Mater., 2020, 861, p 9. https://doi.org/10.4028/www.scientific.net/kem.861.910.4028/www.scientific.net/kem.861.9 ↗
61. A. Ascari, A. Fortunato, E. Liverani, A. Gamberoni, and L. Tomesani, New Possibilities in the Fabrication of Hybrid Components with Big Dimensions by Means of Selective Laser Melting (SLM), Phys. Procedia, 2016, 83, p 839. https://doi.org/10.1016/j.phpro.2016.08.08710.1016/j.phpro.2016.08.087 ↗
62. E. Liverani, S. Toschi, L. Ceschini, and A. Fortunato, Effect of Selective Laser Melting (SLM) Process Parameters on Microstructure and Mechanical Properties of 316L Austenitic Stainless Steel, J. Mater. Process. Technol., 2017, 249, p 255. https://doi.org/10.1016/j.jmatprotec.2017.05.04210.1016/j.jmatprotec.2017.05.042 ↗
63. F. Abroug, A. Monnier, L. Arnaud, Y. Balcaen, and O. Dalverny, High Cycle Fatigue Strength of Additively Manufactured AISI 316L Stainless Steel Parts Joined by Laser Welding, Eng. Fract. Mech., 2022, 275, 108865. https://doi.org/10.1016/j.engfracmech.2022.10886510.1016/j.engfracmech.2022.108865 ↗
64. S.P. Kumar, V. Chakkravarthy, A. Mahalingam, R. Rajeshshyam, N. Sriraman, P. Marimuthu, and P.D. Babu, Investigation of Crystallographic Orientation and Mechanical Behaviour in Laser-Welded Stainless Steel 316L Additive Components, Trans. Indian Inst. Met., 2023, 76(2), p 527. https://doi.org/10.1007/s12666-022-02756-610.1007/s12666-022-02756-6 ↗
65. R. Zhang, C. Buchanan, V.P. Matilainen, D. Daskalaki-Mountanou, T.B. Britton, H. Piili, and L. Gardner, Mechanical Properties and Microstructure of Additively Manufactured Stainless Steel with Laser Welded Joints, Mater. Des., 2021, 208, 109921. https://doi.org/10.1016/j.matdes.2021.10992110.1016/j.matdes.2021.109921 ↗
66. I. Tolosa, F. Garciandía, F. Zubiri, F. Zapirain, and A. Esnaola, Study of Mechanical Properties of AISI 316 Stainless Steel Processed By “Selective Laser Melting”, Following Different Manufacturing Strategies, Int. J. Adv. Manuf. Technol., 2010, 51, p 639. https://doi.org/10.1007/s00170-010-2631-510.1007/s00170-010-2631-5 ↗
67. V.P. Matilainen, J. Pekkarinen, and A. Salminen, Weldability of Additive Manufactured Stainless Steel, Phys. Procedia, 2016, 83, p 808. https://doi.org/10.1016/j.phpro.2016.08.08310.1016/j.phpro.2016.08.083 ↗
68. J. Yang, Y. Wang, F. Li, W. Huang, G. Jing, Z. Wang, and X. Zeng, Weldability, Microstructure and Mechanical Properties of Laser-Welded Selective Laser Melted 304 Stainless Steel Joints, J. Mater. Sci. Technol., 2019, 35(9), p 1817. https://doi.org/10.1016/j.jmst.2019.04.01710.1016/j.jmst.2019.04.017 ↗
69. F. Caiazzo and V. Alfieri, Optimization of Laser Beam Welding of Steel Parts Made by Additive Manufacturing, Int. J. Adv. Manuf. Technol., 2021, 114, p 3123. https://doi.org/10.1007/s00170-021-07039-w10.1007/s00170-021-07039-w ↗
70. R. Sepe, V. Giannella, V. Alfieri, and F. Caiazzo, Static and Fatigue Behavior of Laser Welded Additively Manufactured 17-4 PH Steel Plates, Procedia Struct. Integrity, 2021, 34, p 172. https://doi.org/10.1016/j.prostr.2021.12.02510.1016/j.prostr.2021.12.025 ↗
71. M. Akbari and R. Kovacevic, Joining of Elements Fabricated by A Robotized Laser/Wire Directed Energy Deposition Process by Using An Autogenous Laser Welding, Int. J. Adv. Manuf. Technol., 2019, 100, p 2971. https://doi.org/10.1007/s00170-018-2891-z10.1007/s00170-018-2891-z ↗
72. L. Feng, J. Gao, F. Liu, C. Huang, and Y. Zheng, Effect of Grain Orientation on Microstructure and Mechanical Properties of Laser Welded Joint of Additive Manufactured 300M Steel, Mater. Today Commun., 2023, 35, 105497. https://doi.org/10.1016/j.mtcomm.2023.10549710.1016/j.mtcomm.2023.105497 ↗
73. A. Leon, A. Shirizly, and E. Aghion, Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing (AM) vs. its Counterpart Gravity Cast Alloy, Metals, 2016, 6, 148. https://doi.org/10.3390/met607014810.3390/met6070148 ↗
74. A. Leon and E. Aghion, Effect of Surface Roughness on Corrosion Fatigue Performance of AlSi10Mg Alloy Produced by selective laser melting (SLM), Mater Charact, 2017, 131, p 188. https://doi.org/10.1016/j.matchar.2017.06.02910.1016/j.matchar.2017.06.029 ↗
75. M. Tang and P.C. Pistorius, Oxides, Porosity and Fatigue Performance of AlSi10Mg Parts Produced by selective laser melting, Int. J. Fatigue, 2017, 94, p 192. https://doi.org/10.1016/j.ijfatigue.2016.06.00210.1016/j.ijfatigue.2016.06.002 ↗
76. L. Thijs, K. Kempen, J.P. Kruth, and J. Van Humbeeck, Fine-Structured Aluminium Products with Controllable Texture by Selective Laser Melting of pre-Alloyed AlSi10Mg Powder, Acta Mater., 2013, 61(5), p 1809. https://doi.org/10.1016/j.actamat.2012.11.05210.1016/j.actamat.2012.11.052 ↗
77. W. Read, K. Wang, M. Essa, and M. Attallah, Selective Laser Melting of AlSi10Mg Alloy: Process Optimization, and Mechanical Properties Development, Mater. Des., 2015, 65, p 417. https://doi.org/10.1016/j.matdes.2014.09.04410.1016/j.matdes.2014.09.044 ↗
78. Y. Li and D. Gu, Parametric Analysis of Thermal Behavior During Selective Laser Melting Additive Manufacturing of Aluminum Alloy Powder, Mater. Des., 2014, 63, p 856. https://doi.org/10.1016/j.matdes.2014.07.00610.1016/j.matdes.2014.07.006 ↗
79. M. Krishnan, E. Atzeni, R. Canali, F. Calignano, D. Manfredi, E.P. Ambrosio, and L. Iuliano, On the Effect of Process Parameters on Properties of AlSi10Mg Parts Produced by DMLS, Rapid Prototyping J., 2014, 20(6), p 449. https://doi.org/10.1108/rpj-03-2013-002810.1108/rpj-03-2013-0028 ↗
80. N.T. Aboulkhair, N.M. Everitt, I. Ashcroft, and C. Tuck, Reducing Porosity in AlSi10Mg Parts Processed by Selective Laser Melting, Addit. Manuf., 2014, 1–4, p 77. https://doi.org/10.1016/j.addma.2014.08.00110.1016/j.addma.2014.08.001 ↗
81. K.G. Prashanth, S. Scudino, H.J. Klauss, K.B. Surreddi, L. Löber, Z. Wang, A.K. Chaubey, U. Kühn, and J. Eckert, Microstructure and Mechanical Properties of Al-12Si Produced by Selective Laser Melting: Effect of Heat Treatment, Mater. Sci. Eng. A, 2014, 590, p 153. https://doi.org/10.1016/j.msea.2013.10.02310.1016/j.msea.2013.10.023 ↗
82. C.A. Biffi, J. Fiocchi, and A. Tuissi, Laser Weldability of AlSi10Mg Alloy Produced by Selective Laser Melting: Microstructure and Mechanical Behavior, J. Mater. Eng. Perform., 2019, 28, p 6714. https://doi.org/10.1007/s11665-019-04402-710.1007/s11665-019-04402-7 ↗
83. S. Katayama, H. Nagayama, M. Mizutani, and Y. Kawahito, Fibre Laser Welding of Aluminium Alloy, Weld. Int., 2009, 23(10), p 744. https://doi.org/10.1080/0950711090283691110.1080/09507110902836911 ↗
84. J. Mäkikangas, T. Rautio, A. Mustakangas, and K. Mäntyjärvi, Laser Welding of AlSi10Mg Aluminium-Based Alloy Produced by Selective Laser Melting (SLM), Procedia Manuf., 2019, 36, p 88. https://doi.org/10.1016/j.promfg.2019.08.01310.1016/j.promfg.2019.08.013 ↗
85. L. Cui, Z. Peng, Y. Chang, D. He, Q. Cao, X. Guo, and Y. Zeng, Porosity, Microstructure, and Mechanical Property of Welded Joints Produced by Different Laser Welding Processes in Selective Laser Melting AlSi10Mg Alloys, Opt. Laser Technol., 2022, 150, 107952. https://doi.org/10.1016/j.optlastec.2022.10795210.1016/j.optlastec.2022.107952 ↗
86. T. Sun, N. Ferguson, C. Liu, G. Gibbons, and P. Franciosa, Application of Adjustable Ring Mode Laser in Remote Laser Welding of Additive Manufactured AlSi10Mg Alloy, J. Laser Appl., 2022, 34(4), 042007. https://doi.org/10.2351/7.000079410.2351/7.0000794 ↗
87. N. Chen, Z. Wan, H.P. Wang, J. Li, B. Yang, J. Solomon, and B. Carlson, Effect of Ambient Pressure on Laser Welding of AlSi10Mg Fabricated by selected laser melting, Mater. Des., 2022, 215, 110427. https://doi.org/10.1016/j.matdes.2022.11042710.1016/j.matdes.2022.110427 ↗
88. Z. Peng, L. Cui, D. He, X. Guo, Y. Zeng, Q. Cao, and H. Huang, Effect of Er and Zr Addition on Laser Weldability of AlSi10Mg Alloys Fabricated by Selective Laser Melting, Mater Charact, 2022, 190, 112070. https://doi.org/10.1016/j.matchar.2022.11207010.1016/j.matchar.2022.112070 ↗
89. F. Beckmann, C. Emmelmann, Optimization of the weldability of laser additive manufactured aluminum by means of hydrogen minimization in the component and welding parameter optimization. Presented in Lasers in Manufacturing Conference, Hamburg, Germany, (2019). https://www.wlt.de/lim/Proceedings2019/data/PDF/Contribution_327_final.pdf
90. X. Hu, Z. Xue, G. Zhao, J. Yun, D. Shi, and X. Yang, Laser Welding of a Selective Laser Melted Ni-base Superalloy: Microstructure and High Temperature Mechanical Property, Mater. Sci. Eng. A, 2019, 745, p 335. https://doi.org/10.1016/j.msea.2018.12.08110.1016/j.msea.2018.12.081 ↗
91. M. Hong, S. Wang, W. Sun, Z. Geng, J. Xin, and L. Ke, Effect of Welding Speed on Microstructure and Mechanical Properties of Selective Laser Melting Inconel 625 Alloy Laser Welded Joint, J. Mater. Res. Technol., 2022, 19, p 2093. https://doi.org/10.1016/j.jmrt.2022.06.02010.1016/j.jmrt.2022.06.020 ↗
92. M. Shan, S. Wang, Y. Cai, F. Gao, S.M. Manladan, L. Zhu, and J. Han, Laser Welding of FeCoCrNiMnAl x (x= 0, 0.75) High-Entropy Alloys Fabricated by Additive Manufacturing, Mater. Sci. Technol., 2022, 38(18), p 1617. https://doi.org/10.1080/02670836.2022.209682110.1080/02670836.2022.2096821 ↗
93. A. Deschamps, S. Ringeval, and L. Delfaut-Durut, Quantitative Characterization of the Microstructure of an Electron-Beam Welded Medium Strength Al-Zn-Mg Alloy, Mater. Sci. Eng. A, 2009, 517(1–2), p 361. https://doi.org/10.1016/j.msea.2009.03.08810.1016/j.msea.2009.03.088 ↗
94. P. Wanjara and M. Brochu, Characterization of Electron Beam Welded AA2024, Vacuum, 2010, 85(2), p 268. https://doi.org/10.1016/j.vacuum.2010.06.00710.1016/j.vacuum.2010.06.007 ↗
95. X. Zhan, J. Chen, J. Liu, Y. Wei, J. Zhou, and Y. Meng, Microstructure and Magnesium Burning Loss Behavior of AA6061 Electron Beam Welding Joints, Mater. Des., 2016, 99, p 449. https://doi.org/10.1016/j.matdes.2016.03.05810.1016/j.matdes.2016.03.058 ↗
96. X. Chen, J. Zhang, X. Chen, X. Cheng, and Z. Huang, Electron Beam Welding of Laser Additive Manufacturing Ti-6.5 Al-3.5 Mo-1.5 Zr-0.3 Si Titanium Alloy Thick Plate, Vacuum, 2018, 151, p 116. https://doi.org/10.1016/j.vacuum.2018.02.01110.1016/j.vacuum.2018.02.011 ↗
97. B. Huang, C. Li, L. Shi, China Materials Engineering Canon, Chemical Industry Press, 2006. From ref. 92
98. M. Nahmany, A. Stern, E. Aghion, and N. Frage, Structural Properties of EB-Welded AlSi10Mg Thin-Walled Pressure Vessels Produced by AM-SLM Technology, J. Mater. Eng. Perform., 2017, 26, p 4813. https://doi.org/10.1007/s11665-017-2953-710.1007/s11665-017-2953-7 ↗
99. I. Rosenthal, M. Nahmany, N. Uzan, A. Stern, N. Frage, Additive Manufacturing by Selective Laser Melting (AM-SLM) of Thin-Walled AlSi10Mg Containers: Structural Characterization and Electron Beam Welding (EBW), Presented in World PM 2016, World Powder Metallurgy 2016, Congress and Exhibition, Hamburg, Germany, October 2016. https://www.proquest.com/openview/7e057d8f6ff8b24c5e983db4b07b5463/1?cbl=596295&pq-origsite=gscholar
100. I. Rosenthal, A. Stern, N. Frage, and M. Nahmany, Structure and Mechanical Properties of AlSil0Mg Fabricated by Selective Laser Melting Additive Manufacturing (SLM-AM), Adv. Mater. Res., 2015, 1111, p 62. https://doi.org/10.4028/www.scientific.net/amr.1111.6210.4028/www.scientific.net/amr.1111.62 ↗