Synergistic Reinforcement of Aluminium Nanocomposites with SiC and Montmorillonite Nanoclay: Mechanical, Tribological and Corrosion Insights

1. S.A. Bansal, V. Khanna, P. Gupta, Metal Matrix Composites: Properties and Applications (CRC Press, 2022). https://books.google.co.in/books?id=Y2Z2EAAAQBAJ10.1201/9781003194910 ↗

2. R. Soundararajan, S. Sivasankaran, F.A. Al-Mufadi, M. Akilesh, and P.R. Elango, Investigation on A356–20wt%SiC Composites Through Mechanical Stirring and Ultra-Sonic-Assisted Cavitation, Mater. Res. Express, 2019, 6, 096572. https://doi.org/10.1088/2053-1591/ab308210.1088/2053-1591/ab3082 ↗

3. K. Uday and G. Rajamurugan, Effect of Stir Casting Parameters and Mono/Hybrid Reinforcements on Aluminium Metal Matrix composite–A Review, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci., 2022, 236, p 4904–4920. https://doi.org/10.1177/0954406221105216610.1177/09544062211052166 ↗

4. N. Babu, R. Soundararajan, V.J. Santhosh, and M. Kamaraj, Effect of Processing Route on the Mechanical and Tribological Behaviour of AA8011 Hybrid Composites, J. Inst. Eng. (India): Ser. D, 2023, 104, p 561–567. https://doi.org/10.1007/s40033-022-00407-010.1007/s40033-022-00407-0 ↗

5. A. Sathishkumar, R. Soundararajan, A. Ramesh, T.J. Muthu Vel, A. Richie Ronaldo, and J. Sai Deepesh, Experimental Investigations on Mechanical and Tribological Behaviour of A356 with x wt% Boron Carbide and Fly Ash Hybrid Composites, IOP Conf. Ser. Mater. Sci. Eng., 2020, 988, 012023. https://doi.org/10.1088/1757-899X/988/1/01202310.1088/1757-899X/988/1/012023 ↗

6. L. Cao, B. Chen, J. Wan, J. Shen, K. Kondoh, S. Li, and J. Li, Simultaneously Improving Strength and Ductility of Carbon Nanotube (CNT)-Reinforced Aluminum Matrix Composites by Embedding CNTs Inside Matrix Grains, Compos. B Eng., 2025, 296, 112240. https://doi.org/10.1016/j.compositesb.2025.11224010.1016/j.compositesb.2025.112240 ↗

7. C.-P. Li, Y.-Q. Li, C.-F. Li, H.-Y. Chen, and Y.-L. Ma, Effect of SiC on Microstructure and Mechanical Properties of Nano-SiC/Mg-8Al-1Sn Composites, J. Mater. Eng. Perform., 2025, 34, p 3884–3893. https://doi.org/10.1007/s11665-024-09372-z10.1007/s11665-024-09372-z ↗

8. Y. Ke, B. Fu, Z. Qiao, H. Liu, J. Cao, Q. Liu, W. Chen, S. Qin, J. Gu, Z. Xu, and H. Tang, Synthesis of Nanostructured Fe–TiB2 Composites with Excellent Mechanical Properties via Laser Powder Bed Fusion, J. Mater. Res. Technol., 2025, 35, p 5651–5664. https://doi.org/10.1016/j.jmrt.2025.02.19310.1016/j.jmrt.2025.02.193 ↗

9. C.-Y. Hsu, Z.H. Mahmoud, S. Abdullaev, F.K. Ali, Y.A. Naeem, R.M. Mizher, M.M. Karim, A.S. Abdulwahid, Z. Ahmadi, S. Habibzadeh, and E. kianfar, Nano Titanium Oxide (nano-TiO2): A Review of Synthesis Methods, Properties, and Applications, Case Stud. Chem. Environ. Eng., 2024, 9, 100626. https://doi.org/10.1016/j.cscee.2024.10062610.1016/j.cscee.2024.100626 ↗

10. S. Zhang, Z. Chen, P. Wei, K. Huang, Y. Zou, S. Yao, M. Li, B. Lu, and J. Xing, Microstructure and Properties of a Nano-ZrO2-Reinforced AlSi10Mg Matrix Composite Prepared by Selective Laser Melting, Mater. Sci. Eng. A, 2022, 838, 142792. https://doi.org/10.1016/j.msea.2022.14279210.1016/j.msea.2022.142792 ↗

11. D. Srinivasan, N. Senthilkumar, M. Ganesh, and G. Perumal, Characterization Studies on Nano Aluminium Composite Reinforced with Montmorillonite Nanoclay and Titanium Carbide, Multiscale Multidiscip. Model. Exp. Des., 2024 https://doi.org/10.1007/s41939-024-00374-x10.1007/s41939-024-00374-x ↗

12. D. Chen, J. Li, K. Sun, and J. Fan, Graphene-Reinforced Metal Matrix Composites: Fabrication, Properties, and Challenges, Int. J. Adv. Manuf. Technol., 2023, 125, p 2925–2965. https://doi.org/10.1007/s00170-023-10886-410.1007/s00170-023-10886-4 ↗

13. F. Rocha and S. Simões, Aluminum Nanocomposites Reinforced with Al2O3 Nanoparticles: Synthesis, Structure, and Properties, J. Compos. Sci., 2024, 8, 33. https://doi.org/10.3390/jcs801003310.3390/jcs8010033 ↗

14. P. Madhukar, N. Selvaraj, S. Gugulothu, and P. Barmavatu, Synergistic Effect of Hybrid Nano-Particles Reinforced Al7150 Metal Matrix Composites (A17150-hBN-B4C) for Advanced Aerospace Applications, Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., 2025 https://doi.org/10.1177/0954408925132458410.1177/09544089251324584 ↗

15. P. Madhukar, N. Selvaraj, G.B.V. Kumar, C.S.P. Rao, F. Mohammad, R. Seetharam, and M. Chavali, Influence of TiC Nano-Particulates on the Physical and Mechanical Properties of AA7150-TiC MMC: Fabricated by Advanced Novel Process, Nano Select, 2022, 3, p 78–90. https://doi.org/10.1002/nano.20210009410.1002/nano.202100094 ↗

16. V.E. Ogbonna, P. Popoola, and O. Popoola, Mechanical and Tribological Properties of Nanoceramic Reinforced Aluminium-Based Nanocomposites for Engineering Applications, Challenges and Recommendations for Future Improvement: A Review, J. Compos. Mater., 2024, 58, p 2993–3025. https://doi.org/10.1177/0021998324128775810.1177/00219983241287758 ↗

17. M.-T. Vu, G. Monsalve-Bravo, R. Lin, M. Li, S. Bhatia, and S. Smart, Mitigating the Agglomeration of Nanofiller in a Mixed Matrix Membrane by Incorporating an Interface Agent, Membranes (Basel), 2021, 11, p 328. https://doi.org/10.3390/membranes1105032810.3390/membranes11050328 ↗

18. S.K. Sharma, S. Gajević, L.K. Sharma, R. Pradhan, Y. Sharma, I. Miletić, and B. Stojanović, Progress in Aluminum-Based Composites Prepared by stir Casting: Mechanical and Tribological Properties for Automotive, Aerospace, and Military Applications, Lubricants, 2024, 12, 421. https://doi.org/10.3390/lubricants1212042110.3390/lubricants12120421 ↗

19. H. Mehdi, S.S. Bhati, P.K. Mouria, S. Mishra, M. Bhadana, and L. Batra, Effect of Nanoparticles on Metal Matrix Composites Fabricated by Ultrasonic Stir Casting, Int. J. Cast Met. Res., 2025 https://doi.org/10.1080/13640461.2025.249660710.1080/13640461.2025.2496607 ↗

20. D.A. Ashebir, G.A. Mengesha, and D.K. Sinha, An Insight into Mechanical and Metallurgical Behavior of Hybrid Reinforced Aluminum Metal Matrix Composite, Adv. Mater. Sci. Eng., 2022, 2022, p 1–31. https://doi.org/10.1155/2022/784398110.1155/2022/7843981 ↗

21. K. Velavan, K. Palanikumar, K. Thirumal, K.R. Kannan, M. Kannan, and P. Arunkumar, Mechanical Characterization of Aluminium alloy LM25 Reinforced with TiC and Graphite for Structural Applications, Mater. Today Proc., 2023, 72, p 2049–2055. https://doi.org/10.1016/j.matpr.2022.08.10510.1016/j.matpr.2022.08.105 ↗

22. V. Pandey, R. Seetharam, H. Chelladurai, and J. Immanuel R., Fabrication and Characterization of Al Alloy Composites Reinforced with Nanocrystalline Al4CrFeMnTi0.25 High-Entropy Alloy Particles via Double Ultrasonic Stir Casting for Aerospace Applications, J. Alloys Compd., 2025, 1010, 177900. https://doi.org/10.1016/j.jallcom.2024.17790010.1016/j.jallcom.2024.177900 ↗

23. B.N. Akash Deep, S. Rajanna, K.N. Krishnamurthy, G.C. Manjunath Patel, T. Ganesha, G.V.G. Reddy, M. Hasan, and E. Linul, Ultrasonic Assisted Stir Squeeze Casting of AA5456/Al2O3–SiC-Gr-MoS2 Hybrid Nanocomposites: Microstructure and Strengthening Analysis, J. Mater. Res. Technol., 2025, 34, p 1611–1635. https://doi.org/10.1016/j.jmrt.2024.12.17210.1016/j.jmrt.2024.12.172 ↗

24. A. Lakshmikanthan, S. Angadi, V. Malik, K.K. Saxena, C. Prakash, S. Dixit, and K.A. Mohammed, Mechanical and Tribological Properties of Aluminum-Based Metal-Matrix Composites, Materials, 2022, 15, p 6111. https://doi.org/10.3390/ma1517611110.3390/ma15176111 ↗

25. J. Prakash, S. Gopalakannan, and V.K. Chakravarthy, Mechanical Characterization Studies of Aluminium alloy 7075 Based Nanocomposites, SILICON, 2022, 14, p 1683–1694. https://doi.org/10.1007/s12633-021-00979-810.1007/s12633-021-00979-8 ↗

26. P.K. Dinesh Kumar and S. Darius Gnanaraj, Characterization of Al-Si alloy Reinforced with B4C and TiO2 Nanoparticles, SILICON, 2024, 16, p 4437–4449. https://doi.org/10.1007/s12633-024-03012-w10.1007/s12633-024-03012-w ↗

27. A. Bhowmik, B. Sen, N. Beemkumar, J. Singh Chohan, P.S. Bains, G. Singh, A.V. Kumar, and J.S. A, Development and Wear Resistivity Performance of SiC and TiB2 Particles Reinforced Novel Aluminium Matrix Composites, Results Eng., 2024, 24, 102981. https://doi.org/10.1016/j.rineng.2024.10298110.1016/j.rineng.2024.102981 ↗

28. B.K. Gonfa, D. Sinha, U.K. Vates, I.A. Badruddin, M. Hussien, S. Kamangar, G.K. Singh, G.M.S. Ahmed, N.J. Kanu, and N. Hossain, Investigation of Mechanical and Tribological Behaviors of Aluminum Based Hybrid Metal Matrix Composite and Multi-Objective Optimization, Materials, 2022, 15, p 5607. https://doi.org/10.3390/ma1516560710.3390/ma15165607 ↗

29. A. Nirala, S. Soren, N. Kumar, M.A. Khan, S. Islam, and N.A. Khan, Micro-Mechanical and Tribological Behavior of Al/SiC/B4C/CNT Hybrid Nanocomposite, Sci. Rep., 2023, 13, p 13147. https://doi.org/10.1038/s41598-023-39713-210.1038/s41598-023-39713-2 ↗

30. V.T. Satish, M. Senthilkumar, and J. Renjin Bright, Experimental Studies on the Mechanical Behaviour of LM25-SiCf-Interpenetrating Phase Composites Synthesized Using Gas Pressure Infiltration, SILICON, 2023, 15, p 7357–7370. https://doi.org/10.1007/s12633-023-02584-310.1007/s12633-023-02584-3 ↗

31. Z. Ahmad, S. Khan, and S. Hasan, Microstructural Characterization and Evaluation of Mechanical Properties of Silicon Nitride Reinforced LM 25 Composite, J. Mater. Res. Technol., 2020, 9, p 9129–9135. https://doi.org/10.1016/j.jmrt.2020.06.03710.1016/j.jmrt.2020.06.037 ↗

32. D. Ni, Y. Cheng, J. Zhang, J.-X. Liu, J. Zou, B. Chen, H. Wu, H. Li, S. Dong, J. Han, X. Zhang, Q. Fu, and G.-J. Zhang, Advances in Ultra-High Temperature Ceramics, Composites, and Coatings, J. Adv. Ceram., 2022, 11, p 1–56. https://doi.org/10.1007/s40145-021-0550-610.1007/s40145-021-0550-6 ↗

33. N. Senthilkumar, K. Gajalakshmi, K. Palanikumar, B. Deepanraj, and A.R. Afzal, Wear Analysis and Optimization of Nanoclay and Copper Coated Carbon Fiber Strengthened Hybrid Aluminium Composite, Results Eng., 2025, 25, 103711. https://doi.org/10.1016/j.rineng.2024.10371110.1016/j.rineng.2024.103711 ↗

34. A.H. Idrisi and A.-H.I. Mourad, Conventional Stir Casting Versus Ultrasonic Assisted Stir Casting Process: Mechanical and Physical Characteristics of AMCs, J. Alloys Compd., 2019, 805, p 502–508. https://doi.org/10.1016/j.jallcom.2019.07.07610.1016/j.jallcom.2019.07.076 ↗

35. K. Ponhan, P. Jiandon, K. Juntaracena, C. Potisawang, and M. Kongpuang, Enhanced Microstructures, Mechanical Properties, and Machinability of High Performance ADC12/SiC Composites Fabricated Through the Integration of a Master Pellet Feeding Approach and Ultrasonication-Assisted Stir Casting, Results Eng., 2024, 24, 102937. https://doi.org/10.1016/j.rineng.2024.10293710.1016/j.rineng.2024.102937 ↗

36. Z. Xu, C. Tonry, C. Beckwith, A. Kao, H. Wong, M.S.P. Shaffer, K. Pericleous, and Q. Li, High-Speed Imaging of the Ultrasonic Deagglomeration of Carbon Nanotubes in Water, JOM, 2022, 74, p 2470–2483. https://doi.org/10.1007/s11837-022-05274-410.1007/s11837-022-05274-4 ↗

37. G. Perumal, N. Senthilkumar, K. Palanikumar, and N. Anbazhaghan, Effect of Plasma Spraying Parameters on Wear and Scratch Resistance of Al2O3-40 Wt.% YSZ Ceramic Coatings Deposited on Ti-6Al-4 V Alloy, J. Aust. Ceram. Soc., 2023, 59, p 379–390. https://doi.org/10.1007/s41779-023-00835-510.1007/s41779-023-00835-5 ↗

38. G. Perumal, N. Senthilkumar, C. Subramaniyan, R. Ramasamy, and D. Satheshkumar, Tailoring the Mechanical and Tribological Properties of Ti-6Al-4 V Alloy Through Duplex Heat Treatment, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-08586-x10.1007/s11665-023-08586-x ↗

39. M. Ostolaza, J.I. Arrizubieta, A. Lamikiz, and E. Ukar, Study of the Flexural Behaviour and Bonding Strength of WC-Co Metal Matrix Composite Coatings Produced by Laser Directed Energy Deposition, Surf. Coat. Technol., 2023, 463, 129538. https://doi.org/10.1016/j.surfcoat.2023.12953810.1016/j.surfcoat.2023.129538 ↗

40. C.K. Dhinakarraj, N. Senthilkumar, K. Palanikumar, and B. Deepanraj, Experimental Interrogations on Morphologies and Mechanical Delineation of Silicon Nitride Fortified Mg-Al-Zn Alloy Composites, Mater. Today Commun., 2023, 35, 105731. https://doi.org/10.1016/j.mtcomm.2023.10573110.1016/j.mtcomm.2023.105731 ↗

41. F.R. Jones, Composites Science, Technology, and Engineering, Cambridge University Press (2022) https://books.google.co.in/books?id=yhNkEAAAQBAJ.

42. V. Suresh, P. Vikram, R. Palanivel, and R.F. Laubscher, Mechanical and Wear Behavior of LM25 Aluminium Matrix Hybrid Composite Reinforced with Boron Carbide, Graphite and Iron Oxide, Mater. Today Proc., 2018, 5, p 27852–27860. https://doi.org/10.1016/j.matpr.2018.10.02310.1016/j.matpr.2018.10.023 ↗

43. H. Xing, J. Li, X. Hu, L. Tian, R. Zhang, and Y. Wang, Mechanism Study of Composite co-Deposited Cu/Co-Mo Corrosion-Resistant Coating on 6061 Al Alloy, Surf. Coat. Technol., 2024, 476, 130202. https://doi.org/10.1016/j.surfcoat.2023.13020210.1016/j.surfcoat.2023.130202 ↗

44. S.P. V.G. and S.K. S., Effect of Ultrasonic Treatment During Stir Casting on Mechanical Properties of AA6063-SiC Composites, Mater. Chem. Phys., 2023, 294, 126977. https://doi.org/10.1016/j.matchemphys.2022.12697710.1016/j.matchemphys.2022.126977 ↗

45. C. Tan, J. Zou, D. Wang, W. Ma, and K. Zhou, Duplex Strengthening via SiC Addition and in-situ Precipitation in Additively Manufactured Composite Materials, Compos. B Eng., 2022, 236, 109820. https://doi.org/10.1016/j.compositesb.2022.10982010.1016/j.compositesb.2022.109820 ↗

46. V. Singhal, D. Shelly, A. Saxena, R. Gupta, V.K. Verma, and A. Jain, Study of the Influence of Nanoparticle Reinforcement on the Mechanical and Tribological Performance of Aluminum Matrix Composites—A Review, Lubricants, 2025, 13, p 93. https://doi.org/10.3390/lubricants1302009310.3390/lubricants13020093 ↗

47. A. Dey and M.M. Khan, MCD Approach for Assessing the Optimal Operating Condition During Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique, SILICON, 2022, 14, p 3673–3691. https://doi.org/10.1007/s12633-021-01123-210.1007/s12633-021-01123-2 ↗

48. V. Agubra, P. Owuor, and M. Hosur, Influence of Nanoclay Dispersion Methods on the Mechanical Behavior of E-glass/Epoxy Nanocomposites, Nanomaterials, 2013, 3, p 550–563. https://doi.org/10.3390/nano303055010.3390/nano3030550 ↗

49. M. Megahed, M. Agwa, and A. Megahed, Effect of Ultrasonic Parameters on the Mechanical Properties of Glass Fiber Reinforced Polyester Filled with Nano-Clay, J. Ind. Text., 2022, 51, p 2944S-2959S. https://doi.org/10.1177/152808372091834810.1177/1528083720918348 ↗

50. S. Shin, H. Park, B. Park, S.-B. Lee, S.-K. Lee, Y. Kim, S. Cho, and I. Jo, Dispersion Mechanism and Mechanical Properties of SiC Reinforcement in Aluminum Matrix Composite Through Stir- and Die-Casting Processes, Appl. Sci., 2021, 11, p 952. https://doi.org/10.3390/app1103095210.3390/app11030952 ↗

51. T. Lokesh and U.S. Mallik, Effect of Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of Al6061-SiC p Composites, IOP Conf. Ser. Mater. Sci. Eng., 2016, 149, 012119. https://doi.org/10.1088/1757-899X/149/1/01211910.1088/1757-899X/149/1/012119 ↗

52. G. Anbuchezhiyan, N.M. Mubarak, W. Ahmad, and F. Abnisa, Exploring the Mechanical and Structural Properties of B4C/ZrO2 Strengthened Al-Mg-Cr Alloy Hybrid Composites, J. Alloys Compd., 2024, 980, 173585. https://doi.org/10.1016/j.jallcom.2024.17358510.1016/j.jallcom.2024.173585 ↗

53. M. Sambathkumar, P. Navaneethakrishnan, K. Ponappa, and K.S.K. Sasikumar, Mechanical and Corrosion Behavior of Al7075 (hybrid) Metal Matrix Composites by Two Step Stir Casting Process, Lat. Am. J. Solids Struct., 2017, 14, p 243–255. https://doi.org/10.1590/1679-7825313210.1590/1679-78253132 ↗

54. P. Beldar and S. Kadbhane, Mechanical and Wear Analysis of AA6061-T6-SiC-TiC-Graphite Metal Matrix Composite, Mater. Lett., 2025, 382, 137842. https://doi.org/10.1016/j.matlet.2024.13784210.1016/j.matlet.2024.137842 ↗

55. H.K. Garg, S. Sharma, R. Kumar, A. Manna, S.P. Dwivedi, M. Abbas, A. Kumar, M.I. Khan, and Y.S. Bisht, Mechanical, Tribological, and Morphological Properties of SiC and Gr Reinforced Al-0.7Fe-0.6Si-0.375Cr-0.25Zn Based Stir-Casted Hybrid Metal Matrix Composites for Automotive Applications: Fabrication and Characterizations, J. Mater. Res. Technol., 2024, 28, p 3267–3285. https://doi.org/10.1016/j.jmrt.2023.12.17110.1016/j.jmrt.2023.12.171 ↗

56. L. Natrayan and M. Senthil Kumar, Mechanical, Microstructure and Wear Behaviour of LM25/Sic/Mica Metal Matrix Composite Fabricated by Squeeze Casting Technique, Appl. Eng. Lett. J. Eng. Appl. Sci., 2019, 4, p 72–77. https://doi.org/10.18485/aeletters.2019.4.2.510.18485/aeletters.2019.4.2.5 ↗

57. C.-K. Lam, H. Cheung, K. Lau, L. Zhou, M. Ho, and D. Hui, Cluster Size Effect in Hardness of Nanoclay/Epoxy Composites, Compos. B Eng., 2005, 36, p 263–269. https://doi.org/10.1016/j.compositesb.2004.09.00610.1016/j.compositesb.2004.09.006 ↗

58. M.S.S. Kumar, C.P. Selvan, K. Santhanam, A. Kadirvel, V. Chandraprabu, and L. SampathKumar, Effect of Nanomaterials on Tribological and Mechanical Properties of Polymer Nanocomposite Materials, Adv. Mater. Sci. Eng., 2022, 2022, p 1–16. https://doi.org/10.1155/2022/216585510.1155/2022/2165855 ↗

59. M. Vignesh, G. Anbuchezhiyan, V.K. Mamidi, and A.V. Anand, Enriching Mechanical, Wear, and Corrosion Behaviour Of Sio2/Tio2 Reinforced Al 5754 Alloy Hybrid Composites, Mater. Lett., 2024, 361, 136106. https://doi.org/10.1016/j.matlet.2024.13610610.1016/j.matlet.2024.136106 ↗

60. S.D. Fernández-Silva, M. García-Morales, C. Ruffel, and M.A. Delgado, Influence of the Nanoclay Concentration and Oil Viscosity on the Rheological and Tribological Properties of Nanoclay-Based Ecolubricants, Lubricants, 2021, 9, p 8. https://doi.org/10.3390/lubricants901000810.3390/lubricants9010008 ↗

61. D.M. Shinde, P. Sahoo, and J.P. Davim, Tribological Characterization of Particulate-Reinforced Aluminum Metal Matrix Nanocomposites: A Review, Adv. Compos. Lett., 2020 https://doi.org/10.1177/2633366X2092140310.1177/2633366X20921403 ↗

62. A.H.S. Rahiman, D.S.R. Smart, A. Thomas, T.S. Athul, A.R. Tomy, B. Nazar, and M. George, Wear Analysis and Mapping of State of the Art Aluminium 7050 Hybrid Composite for Aerospace Industry, Can. Metall. Q., 2025 https://doi.org/10.1080/00084433.2025.247555810.1080/00084433.2025.2475558 ↗

63. R. Jojith, M. Sam, and N. Radhika, Recent Advances in Tribological Behavior of Functionally Graded Composites: A Review, Eng. Sci. Technol. Int. J., 2022, 25, 100999. https://doi.org/10.1016/j.jestch.2021.05.00310.1016/j.jestch.2021.05.003 ↗

64. X. Zhang, M. Yang, M. Zhang, C. Yin, Z. Liu, G. Chen, and W. Zhu, Modulation of Interface and Intermetallics by Minor Nano-Ti Addition for Enhancing Mechanical Properties and Wear Resistance in the Short Carbon fiber/Cu Composites, Compos. Commun., 2025, 58, 102534. https://doi.org/10.1016/j.coco.2025.10253410.1016/j.coco.2025.102534 ↗

65. L. Blades, D. Hills, D. Nowell, K.E. Evans, and C. Smith, An Exploration of Debris Types and their Influence on Wear Rates in Fretting, Wear, 2020, 450–451, 203252. https://doi.org/10.1016/j.wear.2020.20325210.1016/j.wear.2020.203252 ↗

66. S.S.C. Kollabathini, S.P. Dora, and S. Chintada, Corrosion Behaviour of Advanced Composites Containing Surface Modified SIC as Reinforcement, J. Alloys Compd., 2025, 1010, 177423. https://doi.org/10.1016/j.jallcom.2024.17742310.1016/j.jallcom.2024.177423 ↗

67. M.C. Gowrishankar, P. Preethi Kumari, P. Nayak, P. Bhagavath, S.A. Rao, A.R. Shetty, B.M. Karthik, and D. Srinivas, Investigation on Corrosion Behavior of 7075 Aluminum Alloy Reinforced with Ni Coated Duralumin Powder-A Hybrid Metal Matrix Composite in Acid and Neutral Medium, Cogent Eng., 2024 https://doi.org/10.1080/23311916.2024.236711810.1080/23311916.2024.2367118 ↗

68. K. Velavan, K. Palanikumar, G. Perumal, and N. Senthilkumar, Investigating the Corrosion Activity of Boron Carbide and Mica Particle Hybrid Composites with an Aluminum Matrix Prepared by Stir Casting, Results Eng., 2025 https://doi.org/10.1016/J.RINENG.2025.10519410.1016/J.RINENG.2025.105194 ↗

69. R. Priyadharshini and J.R. Xavier, Recent Advances in Graphene-Based Nanocomposite Coatings for Corrosion Resistance in the Automotive Industry and Their Smart Functional Applications. J. Bio. Tribo. Corros., 2025, 11, 113. https://doi.org/10.1007/s40735-025-01040-610.1007/s40735-025-01040-6 ↗

70. M. Karthikraja, K. Ramanathan, K.T. Loganathan, and S. Selvaraj, Corrosion Behaviour of SiC and Al2O3 Reinforced Al 7075 Hybrid Aluminium Matrix Composites by Weight Loss and Electrochemical Methods, J. Indian Chem. Soc., 2023, 100, 101002. https://doi.org/10.1016/j.jics.2023.10100210.1016/j.jics.2023.101002 ↗

71. E. Bagheri, N. Adibi, H. Ding, Y. Chen, and S. Guo, Mechanical and Corrosion Properties of Al2O3/7075 Aluminum Matrix Composites Prepared by Additive Friction Stir Deposition, Prog. Addit. Manuf., 2025 https://doi.org/10.1007/s40964-025-00964-210.1007/s40964-025-00964-2 ↗

72. H. Zhu and J. Li, Advancements in Corrosion Protection for Aerospace Aluminum Alloys Through Surface Treatment, Int. J. Electrochem. Sci., 2024, 19, 100487. https://doi.org/10.1016/j.ijoes.2024.10048710.1016/j.ijoes.2024.100487 ↗

73. N. Affaf, J. Alias, and N. Alang, Montmorillonite (MMT) Nanoclay in Smart Coatings for Corrosion Protection of Metal Alloy: A Brief Review, J. Phys. Conf. Ser., 2024, 2688, 012012. https://doi.org/10.1088/1742-6596/2688/1/01201210.1088/1742-6596/2688/1/012012 ↗

74. A. Fattah-alhosseini, Z. Sangarimotlagh, M. Karbasi, and B. Dikici, Enhancing Corrosion Resistance in Mg-based Alloys through MOF-Incorporated Coatings: A Comprehensive Review, Appl. Surf. Sci. Adv., 2024, 21, 100607. https://doi.org/10.1016/j.apsadv.2024.10060710.1016/j.apsadv.2024.100607 ↗

75. W. Aperador, J. Aperador, and G. Orozco-Hernández, Comparative Analysis of the Corrosion and Mechanical Behavior of an Al-SiC Composite and AA 2024 Alloy Fabricated by Powder Metallurgy for Aeronautical Applications, Metals (Basel), 2024, 14, p 1462. https://doi.org/10.3390/met1412146210.3390/met14121462 ↗