Investigation of Residual Stresses Using Ultrasonic and XRD Methods in 316L Stainless Steel Samples Manufactured by Selective Laser Melting Process
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A. Singh and A. Agrawal, Investigation of Surface Residual Stress Distribution in Deformation Machining Process for Aluminum Alloy, J. Mater. Process. Technol., 2015, 225, p 195–202.10.1016/j.jmatprotec.2015.05.025 ↗
2. T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method, J. Compos. Sci., 2020, 4(3), p 143.10.3390/jcs4030143 ↗
3. M. Afshari, M. Khandaei, R. Shoja Razavi, and S.M. Barekat, Investigating the Effect of Laser Surface Melting Process Parameters on Thermal Efficiency by Reverse Analysis and Experimental Design, J. Nonlinear Opt. Phys. Mater., 2025, 34(01), p 2350085.10.1142/S0218863523500856 ↗
4. H.K. Nirala and A. Agrawal, Residual Stress Inclusion in the Incrementally Formed Geometry Using Fractal Geometry Based Incremental Toolpath (FGBIT), J. Mater. Process. Technol., 2020, 279, p 116575.10.1016/j.jmatprotec.2019.116575 ↗
5. P.V. Grant, J.D. Lord, P.S. Whitehead, The Measurement of Residual Stresses by the Incremental Hole Drilling Technique (2006).
6. Y.M. Shabana and N. Noda, Thermo-Elasto-Plastic Stresses in Functionally Graded Materials Subjected to Thermal Loading Taking Residual Stresses of the Fabrication Process into Consideration, Compos. Part B Eng., 2001, 32(2), p 111–121.10.1016/S1359-8368(00)00049-4 ↗
7. J.S. Robinson, S. Hossain, C.E. Truman, A.M. Paradowska, D.J. Hughes, R.C. Wimpory, and M.E. Fox, Residual Stress in 7449 Aluminium Alloy Forgings, Mater. Sci. Eng., A, 2010, 527, p 2603–2612.10.1016/j.msea.2009.12.022 ↗
8. R. Acevedo, P. Sedlak, R. Kolman, and M. Fredel, Residual Stress Analysis of Additive Manufacturing of Metallic Parts Using Ultrasonic Waves: State of the Art Review, J. Mater. Res. Technol., 2020, 9(4), p 9457–9477.10.1016/j.jmrt.2020.05.092 ↗
9. N.S. Rossini, M. Dassisti, K.Y. Benyounis, and A.G. Olabi, Methods of Measuring Residual Stresses in Components, Mater. Des., 2012, 35, p 572–588.10.1016/j.matdes.2011.08.022 ↗
10. C. Guo, G. Li, S. Li, X. Hu, H. Lu, X. Li, Z. Xu et al., Additive Manufacturing of Ni-Based Superalloys: Residual Stress, Mechanisms of Crack Formation and Strategies for Crack Inhibition, Nano Mater. Sci., 2023, 5(1), p 53–77.10.1016/j.nanoms.2022.08.001 ↗
11. M.S. Alam, S.R. Campbell, S.R. Spivey, G. Dutta, N. Pal, A. Karan, J. Xie, M.A. DeCoster, and E.P. Murray, Additively Manufactured 316L Stainless Steel as a Potential Alternative Implant Material, J. Mater. Res. Technol., 2025, 34, p 2358–2373.10.1016/j.jmrt.2024.12.199 ↗
12. W.-J. Lai, A. Ojha, Z. Li, C. Engler-Pinto, and X. Su, Effect of Residual Stress on Fatigue Strength of 316L Stainless Steel Produced by Laser Powder Bed Fusion Process, Prog. Addit. Manuf., 2021 https://doi.org/10.1007/s40964-021-00164-810.1007/s40964-021-00164-8 ↗
13. P. Prabhakar, W.J. Sames, R. Dehoff, and S.S. Babu, Computational Modeling of Residual Stress Formation During the Electron Beam Melting Process for Inconel 718, Addit. Manuf., 2015, 7, p 83–91.
14. P. Mercelis and J.P. Kruth, Residual Stresses in Selective Laser Sintering and Selective Laser Melting, Rapid Prototyping J., 2006, 12, p 254–265.10.1108/13552540610707013 ↗
15. Y. Javadi, S. Sadeghi, and M. Ahmadi Najafabadi, Taguchi Optimization and Ultrasonic Measurement of Residual Stresses in the Friction Stir Welding, Mater. Des., 2014, 55, p 27–34.10.1016/j.matdes.2013.10.021 ↗
16. R.B.O. Acevedo, K. Kantarowska, E.C. Santos, and M.C. Fredel, Residual Stress Measurement Techniques for Ti6Al4V Parts Fabricated Using Selective Laser Melting: State of the Art Review, Rapid Prototyping J., 2023, 29(8), p 1549–1564.10.1108/RPJ-04-2019-0097 ↗
17. J.L. Rose, Ultrasonic Guided Waves in Solid Media, Cambridge University Press, Cambridge, 2014.10.1017/CBO9781107273610 ↗
18. Y.-I. Hwang, G. Kim, Y.-I. Kim, J.-H. Park, M.Y. Choi, and K.-B. Kim, Experimental Measurement of Residual Stress Distribution in rail Specimens Using Ultrasonic LCR Waves, Appl. Sci., 2021, 11(19), p 9306.10.3390/app11199306 ↗
19. N. Ahsan and B. Khoda, AM Optimization Framework for Part and Process Attributes Through Geometric Analysis, Addit. Manuf., 2016, 11, p 85–96.
20. M. Coskun, B. Sagbas, Y. Akyıldız, and Ö.C. Odabaş, Investigation of the Effect of Process Parameters and Geometry-Related Variations on Residual Stress for Aluminum 7050 Alloy Produced Via Laser Powder Bed Fusion, J. Mater. Eng. Perform., 2024, 33(15), p 7577–7585.10.1007/s11665-024-09374-x ↗
21. F. Azarmi and I. Sevostianov, Evaluation of the Residual Stresses in Metallic Materials Produced by Additive Manufacturing Technology: Effect of Microstructure, Curr. Opin. Chem. Eng., 2020, 28, p 21–27.10.1016/j.coche.2019.12.004 ↗
22. Q. Luo, A Modified x-ray Diffraction Method to Measure Residual Normal and Shear Stresses of Machined Surfaces, Int. J. Adv. Manuf. Technol., 2022, 119(5), p 3595–3606.10.1007/s00170-021-08645-4 ↗
23. M.D.A. Valentine, V. Dhokia, J. Flynn, S.A.M. McNair, and A.J.G. Lunt, Characterisation of Residual Stresses and Oxides in Titanium, Nickel, and Aluminium Alloy Additive Manufacturing Powders Via Synchrotron x-Ray Diffraction, Mater. Today Commun., 2023, 35, p 105900.10.1016/j.mtcomm.2023.105900 ↗
24. S. Marola, S. Bosia, A. Veltro, G. Fiore, D. Manfredi, M. Lombardi, G. Amato, M. Baricco, and L. Battezzati, Residual Stresses in Additively Manufactured AlSi10Mg: Raman Spectroscopy and x-Ray Diffraction Analysis, Mater. Des., 2021, 202, p 109550.10.1016/j.matdes.2021.109550 ↗
25. W. Zhang, Da. Guo, L. Wang, C.M. Davies, W. Mirihanage, M. Tong, and N.M. Harrison, X-ray Diffraction Measurements and Computational Prediction of Residual Stress Mitigation Scanning Strategies in Powder Bed Fusion Additive Manufacturing, Addit. Manuf., 2023, 61, p 103275.
26. Y. Zhan, H. Xu, W. Du, and C. Liu, Study on the Effect of Scanning Strategy on Residual Stress in Laser Additive Manufacturing with the Laser Ultrasound Technique, Exp. Mech., 2022 https://doi.org/10.1007/s11340-021-00795-610.1007/s11340-021-00795-6 ↗
27. Yu. Zhan, H. Xu, W. Du, and C. Liu, Research on the Influence of Heat Treatment on Residual Stress of TC4 Alloy Produced by Laser Additive Manufacturing Based on Laser Ultrasonic Technique, Ultrasonics, 2021, 115, p 106466.10.1016/j.ultras.2021.106466 ↗
28. Y. Ma, Z. Hu, Y. Tang, S. Ma, Y. Chu, X. Li, W. Luo, L. Guo, X. Zeng, and Y. Lu, Laser Opto-Ultrasonic Dual Detection for Simultaneous Compositional, Structural, and Stress Analyses for Wire+ Arc Additive Manufacturing, Addit. Manuf., 2020, 31, p 100956.
29. Y. Javadi, A. Hutchison, R. Zimermann, D. Lines, N.E. Sweeney, M. Vasilev, E. Mohseni et al. Development of a phased array ultrasonic system for residual stress measurement in welding and additive manufacturing. in Pressure Vessels and Piping Conference, vol. 86182, p. V04BT06A057. American Society of Mechanical Engineers (2022)10.1115/PVP2022-85023 ↗
30. X. Zhao, A. Iyer, P. Promoppatum, and S.C. Yao, Numerical Modeling of the Thermal Behavior and Residual Stress in the Direct Metal Laser Sintering Process of Titanium Alloy Products, Addit. Manuf., 2017, 14, p 126–136.
31. Yu. Zhang, L. Peng, Y. Ye, Y. Chi, Le. Gao, X. Zha, T. Huang, Y. Zhang, H. Ding, and C. Ye, Exploring the Strengthening Mechanisms of Additive Manufactured Metals Treated by Ultrasonic Nanocrystal Surface Modification, Int. J. Fatigue, 2025, 190, p 108609.10.1016/j.ijfatigue.2024.108609 ↗
32. L. Ramineni, A. Almotari, M. Ali, A. Algamal, and A. Qattawi, Residual Stress Mapping in Heat-Assisted Additive Manufacturing of IN 718: An x-ray Diffraction Study, J. Mater. Eng. Perform., 2024, 33(8), p 4124–4135.10.1007/s11665-024-09269-x ↗
33. J. Schröder, A. Evans, T. Mishurova, A. Ulbricht, M. Sprengel, I. Serrano-Munoz, T. Fritsch, A. Kromm, T. Kannengießer, and G. Bruno, Diffraction-Based Residual Stress Characterization in Laser Additive Manufacturing of Metals, Metals, 2021, 11(11), p 1830.10.3390/met11111830 ↗
34. L. Engelking, A. Eissel, D. Schroepfer, K. Treutler, T. Kannengiesser, and V. Wesling, Optimisation of Surface Residual Stresses Using Ultrasonic-Assisted Milling for Wire-Arc Additive Manufactured Ni Alloy Components, Int. J. Adv. Manuf. Technol., 2023, 126(9), p 4191–4198.10.1007/s00170-023-11326-z ↗
35. Xu. Wei, L. Zhang, and X. Li, Influence of Ultrasonic Impact Characteristics on Stress Distribution of LMD Deposition Layer, Int. J. Adv. Manuf. Technol., 2024, 133(7), p 3785–3800.10.1007/s00170-024-13995-w ↗
36. T. Simson, A. Emmel, A. Dwars, and J. Böhm, Residual Stress Measurements on AISI 316L Samples Manufactured by Selective Laser Melting, Addit. Manuf., 2017, 17, p 183–189.
37. A.S. Wu, D.W. Brown, M. Kumar, G.F. Gallegos, and W.E. King, An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel, Metall. Mater. Trans. A, 2014, 45, p 6260–6270.10.1007/s11661-014-2549-x ↗
38. N.C. Levkulich, S.L. Semiatin, J.E. Gockel, J.R. Middendorf, A.T. DeWald, and N.W. Klingbeil, The Effect of Process Parameters on Residual Stress Evolution and Distortion in the Laser Powder Bed Fusion of Ti-6Al-4V, Addit. Manuf., 2019, 28, p 475–484.
39. Z. Xiao, C. Chen, H. Zhu, Z. Hu, B. Nagarajan, L. Guo, and X. Zeng, Study of Residual Stress in Selective Laser Melting of Ti6Al4V, Mater. Des., 2020, 193, p 108846.10.1016/j.matdes.2020.108846 ↗
40. P.J. Withers and H.K.D.H. Bhadeshia, Residual Stress. Part 1–Measurement Techniques, Mater. Sci. Technol., 2001, 17(4), p 355–365.10.1179/026708301101509980 ↗
41. B. Vrancken, Study of Residual Stresses in Selective Laser Melting. (2016)
42. T. Mukherjee, V. Manvatkar, A. De, and T. DebRoy, Mitigation of Thermal Distortion During Additive Manufacturing, Scr. Mater., 2017, 127, p 79–83.10.1016/j.scriptamat.2016.09.001 ↗
43. P. Bian, J. Shi, Y. Liu, and Y. Xie, Influence of Laser Power and Scanning Strategy on Residual Stress Distribution in Additively Manufactured 316L Steel, Opt. Laser Technol., 2020, 132, p 106477.10.1016/j.optlastec.2020.106477 ↗
44. P. Promoppatum and S.-C. Yao, Influence of Scanning Length and Energy Input on Residual Stress Reduction in Metal Additive Manufacturing: Numerical and Experimental Studies, J. Manuf. Process., 2020, 49, p 247–259.10.1016/j.jmapro.2019.11.020 ↗
45. C. Luo, J. Qiu, Y. Yan, J. Yang, C. Uher, and X. Tang, Finite Element Analysis of Temperature and Stress Fields During the Selective Laser Melting Process of Thermoelectric SnTe, J. Mater. Process. Technol., 2018, 261, p 74–85.10.1016/j.jmatprotec.2018.06.001 ↗
46. Di. Wang, S. Wu, Y. Yang, W. Dou, S. Deng, Z. Wang, and S. Li, The Effect of a Scanning Strategy on the Residual Stress of 316L Steel Parts Fabricated by Selective Laser Melting (SLM), Materials, 2018, 11(10), p 1821.10.3390/ma11101821 ↗
47. S. Waqar, K. Guo, and J. Sun, Evolution of Residual Stress Behavior in Selective Laser Melting (SLM) of 316L Stainless Steel Through Preheating and In-Situ Re-Scanning Techniques, Opt. Laser Technol., 2022, 149, p 107806.10.1016/j.optlastec.2021.107806 ↗
48. J. Yan, H. Song, Y. Dong, W.-M. Quach, and M. Yan, High Strength (~ 2000 MPa) or Highly Ductile (~ 11%) Additively Manufactured H13 by Tempering at Different Conditions, Mater. Sci. Eng., A, 2020, 773, p 138845.10.1016/j.msea.2019.138845 ↗
49. Y. Wei, S. Qi, Y. Wang, X. Chu, Z. Sun, J. Wang, L. Zhang, W. Jia, X. Yang, and S. Liu, Microstructural Evolution and Tribological Properties of M2 High-Speed Steel Fabricated Under Various Selective Electron Beam Melting Processing Parameters, Tribol. Int., 2023, 187, p 108749.10.1016/j.triboint.2023.108749 ↗