Analysis of the Mechanical Properties of 3D-Printed Polylactic Acid/Thermoplastic Polyurethane Multi-materials
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. M. Doshi, M. Ameya, S. Kumar and S. Deshmukh, Printing Parameters and Materials Affecting Mechanical Properties of FDM-3D Printed Parts: Perspective and Prospects, Mater. Today Proc., 2022, 50, p 2269–2275.10.1016/j.matpr.2021.10.003 ↗
2. M.A. Caminero, J.M. Chacon, E. García-Plaza, P.J. Nunez, J.M. Reverte and J.P. Becar, Additive Manufacturing of PLA-based Composites Using Fused Filament Fabrication: Effect of Graphene Nanoplatelet Reinforcement on Mechanical Properties, Polymers, 2019, 11(5), p 799.10.3390/polym11050799 ↗
3. A. Cao, Di. Wan and C. Gao, Christer Westum Elverum, a Novel Method of Fabricating Designable Polylactic acid (PLA)/ Thermoplastic Polyurethane (TPU) Composite Filaments and Structures by Material Extrusion Additive Manufacturing, J. Manuf. Process., 2024, 118, p 432–447.10.1016/j.jmapro.2024.03.015 ↗
4. F. Kartal and A. Kaptan, Sustainable Reinforcement of PLA Composites with Waste Beech Sawdust for Enhanced 3D-Printing Performance, J. of Materi Eng and Perform, 2024 https://doi.org/10.1007/s11665-024-10277-010.1007/s11665-024-10277-0 ↗
5. A. Naqi, Z. Swain and M.E. Mackay, Dual Material Fused Filament Fabrication via Core–shell die Design, ACS Appl. Polym. Mater., 2023, 5, p 2481–2489.10.1021/acsapm.2c02152 ↗
6. J. Liao, N. Brosse, A. Pizzi, S. Hoppe, X. Zhou and G. Du, Characterization and 3D Printability of poly (Lactic Acid)/Acetylated Tannin Composites, Ind. Crops Prod., 2020, 149, 112320.10.1016/j.indcrop.2020.112320 ↗
7. H. Li, T. Wang, J. Sun and Z. Yu, The Effect of Process Parameters in Fused Deposition Modelling on Bonding Degree and Mechanical Properties, Rapid Prototyp. J., 2018, 24, p 80–92.10.1108/RPJ-06-2016-0090 ↗
8. T. Makki, Suhail Hyder Vattathurvalappil, Rajesh Theravalappil, Aamer Nazir, Ali Alhajeri, Mohammed Abdul Azeem, Elsadig Mahdi, Aniz Chennampilly Ummer d, Usman Ali, 3D and 4D Printing: A Review of Virgin Polymers Used in Fused Deposition Modeling, Composites Part C, 2024, 14, 100472.
9. R. Prabhu and A. Devaraju, Recent Review of Tribology, Rheology of Biodegradable and FDM Compatible Polymers, Mater. Today Proc., 2021, 39, p 781–788.10.1016/j.matpr.2020.09.509 ↗
10. J.A. Diaz-Merchan, C. Español-Castro, S.A. Martinez-Ovalle and H.R. Vega-Carrillo, Bolus 3D Printing for Radiotherapy with Conventional PLA, ABS and TPU Filaments: Theoretical-Experimental Study, Appl. Radiat. Isot., 2023, 199, 110908.10.1016/j.apradiso.2023.110908 ↗
11. Sergio Fuentes del Toro, Jorge Crespo-Sanchez, Jorge Ayllón, Alvaro Rodríguez-Prieto, Ana María Camacho, Mechanical Performance of 3D-Printed TPU Auxetic Structures for Energy, Polym. Testing, 2025, 143, 108669.
12. J. Hufert, A. Grebhardt, Y. Schneider and C. Bonten, S, Deformation Behavior of 3D Printed Auxetic Structures of Thermoplastic Polymers: PLA, PBAT, and Blends, Polymers, 2023, 15(2), p 389.10.3390/polym15020389 ↗
13. F. Fenollosa-Artes, L. Jorand, A. Tejo-Otero, P. Lustig-Gainza, G. Romero-Sabat, S. Medel, R. Uceda, Soft 3D printing of Thermoplastic Polyurethane: Preliminary Study, SAGE Publications, Sage UK: London, England (2022), pp. 1128-113510.1177/09544054221100077 ↗
14. S. Xu, S. Ahmed, M. Momin, A. Hossain and T. Zhou, Unleashing the Potential of 3D Printing Soft Materials, Device, 2023, 1(3), p 00091–00101.10.1016/j.device.2023.100067 ↗
15. A.M. Oviedo, A.H. Puente, C. Bernal and E. Pérez, Mechanical Evaluation of Polymeric Filaments and their Corresponding 3D Printed Samples, Polym. Test., 2020 https://doi.org/10.1016/j.polymertesting.2020.10656110.1016/j.polymertesting.2020.106561 ↗
16. M. Moradi, A. Aminzadeh, D. Rahmatabadi and A. Hakimi, Experimental Investigation on Mechanical Characterization of 3D Printed PLA Produced by Fused Deposition Modeling (FDM), Mater. Res. Express, 2021, 8, 035304.10.1088/2053-1591/abe8f3 ↗
17. S.C. Daminabo, S. Goel, S.A. Grammatikos, H.Y. Nezhad and V.K. Thakur, Fused Deposition Modeling-based Additive Manufacturing (3D Printing): Techniques for Polymer Material Systems, Mater. Today Chem., 2020, 16(16), p 100248.10.1016/j.mtchem.2020.100248 ↗
18. A. Dash, S. Kabra, S. Misra, G. Hrishikeshan, R.P. Singh, A.E. Patterson, A. Utkarsh Chadha, J. Rajan and B.B. Hirpha, Comparative Property Analysis of Fused Filament Fabrication PLA Using Fresh and Recycled Feedstocks, Mater. Res. Express, 2022, 9, p 115303.10.1088/2053-1591/ac96d4 ↗
19. D. Rahmatabadi, I. Ghasemi b, M. Baniassadi, K. Abrinia and M. Baghani, 3D Printing of PLA-TPU with Different Component Ratios: Fracture Toughness, Mechanical Properties, and Morphology, J. Mater. Res. Technol., 2022, 21, p 3970–3981.10.1016/j.jmrt.2022.11.024 ↗
20. P. Parandoush and D. Lin, A Review on Additive Manufacturing of Polymer-Fiber Composites, Compos. Struct., 2017, 15, p 36–53.10.1016/j.compstruct.2017.08.088 ↗
21. F. Kartal and A. Kaptan, Sustainable Reinforcement of PLA Composites with Waste Beech Sawdust for Enhanced 3D-Printing Performance, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-10277-010.1007/s11665-024-10277-0 ↗
22. S. Kumar, I. Singh, S.S.R. Koloor, D. Kumar and M.Y. Yahya, On laminated Object Manufactured FDM-Printed ABS/TPU Multimaterial Specimens: an Insight into Mechanical and Morphological Characteristics, Polymers, 2022, 14, p 4066.10.3390/polym14194066 ↗
23. R. Zu, W. Chen, Y. Huang, Y. Chen, C. Du, Q. Fan, H. Li and H. Liu, Tailor-Made 3D Printing TPU/PLA Composites for Damping and Energy Absorption, Mater. Des., 2025, 252, 113752.10.1016/j.matdes.2025.113752 ↗
24. S. Kwon, S. Kwon, H. Lee and M. Subramaniyam, Heat and Moisture Transfer Depending on 3D-Printed Thermoplastic Polyurethane and Ethylene-Vinyl Acetate foam and the Presence of Holes for 3D Printing Clothing Development, Polymers, 2024, 16(12), p 168.10.3390/polym16121684 ↗
25. M.S. Anoop and P. Senthil, Microscale Representative Volume Element Based Numerical Analysis on Mechanical Properties of Fuseddeposition Modelling Components, Mater. Today: Proc., 2020, 39, p 56.
26. A.S. de León, A. Domínguez-Calvo and S.I. Molina, Materials with Enhanced Adhesive Properties Based on Acrylonitrile-Butadiene-Styrene (ABS)/Thermoplastic Polyurethane (TPU) Blends for Fused Filament Fabrication (FFF), Mater. Des., 2019, 182, 108044.10.1016/j.matdes.2019.108044 ↗
27. D. Baca and R. Ahmad, The Impact on the Mechanical Properties of Multi-material Polymers Fabricated with a Single Mixing Nozzle and Multi-nozzle Systems via Fused Deposition Modeling, Int. J. Adv. Manuf. Technol., 2020, 106, p 4509–4520.10.1007/s00170-020-04937-3 ↗
28. F. Kartal and A.R.S.L.A.N. Kaptan, Effect of Filling Ratio-Pattern Parameters on Mechanical Properties of PLA Filaments Used in 3D Printing, Black Sea J. Eng. Sci., 2024, 7(2), p 196–202.10.34248/bsengineering.1388610 ↗
29. F. Kartal and A. Kaptan, Response of PLA Material to 3D Printing Speeds: a Comprehensive Examination on Mechanical Properties and Production Quality, Eur. Mech. Sci., 2024, 8(3), p 137–144.10.26701/ems.1395362 ↗
30. J. Kechagias and S. Zaoutsos, Effects of 3D-Printing Processing Parameters on FFF Parts’ Porosity: Outlook and Trends, Mater. Manuf. Process., 2024, 39(6), p 804–814. https://doi.org/10.1080/10426914.2024.230484310.1080/10426914.2024.2304843 ↗
31. F. Kartal and A. Kaptan, Mechanical Performance of Salvadora Persical (Miswak) Reinforced Polylactic Acid Matrix Composites for Threedimensional Printing, Black Sea J. Eng. Sci., 2023, 6(4), p 458–468.10.34248/bsengineering.1327903 ↗
32. J.D. Kechagias, N.A. Fountas, I. Papantoniou and N.M. Vaxevanidis, Interlaminar Bonding Assessment in Vertical-Oriented Filament Material Extrusion Bending Specimens, Int. J. Adv. Manuf. Technol., 2025 https://doi.org/10.1007/s00170-025-15124-710.1007/s00170-025-15124-7 ↗
33. A. Thirugnanasambandam, H. Dutta, C.L. Gnanasagaran and J.D. Kechagias, Development of 3D Printed Novel Multi-polymer Component Based on Blended Filaments of Polylactic Acid and Polyethylene Terephthalate Glycol, Prog. Addit. Manuf., 2025, 10(2), p 1147–1160.10.1007/s40964-024-00695-w ↗
34. F. Kartal, Mechanical Performance Optimization in FFF 3D Printing Using Taguchi Design and Machine Learning Approach with PLA/Walnut Shell Composites Filaments, J. Vinyl Addit. Technol., 2025 https://doi.org/10.1002/vnl.2219510.1002/vnl.22195 ↗
35. S.P. Zaoutsos and J.D. Kechagias, Optimizing Bonding Conditions Between Multilayer FFF Material Extrusion, Mater. Manuf. Process., 2024, 40(4), p 499–506. https://doi.org/10.1080/10426914.2024.243775310.1080/10426914.2024.2437753 ↗
36. J.D. Kechagias and S.P. Zaoutsos, An Assessment of PLA/wood with PLA Core Sandwich Multilayer Component Tensile Strength Under different 3D Printing Conditions, J. Manuf. Process., 2024, 131, p 1240–1249.10.1016/j.jmapro.2024.09.098 ↗
37. A. Kaptan and F. Kartal, A Critical Review of Composite Filaments for Fused Deposition Modeling: Material Properties, Applications, and Future Directions, Eur. Mech. Sci., 2024, 8(3), p 199–209.10.26701/ems.1451829 ↗
38. A. Kaptan, S. Mercan and F. Kartal, Influence of Process Parameters on Kerf Width in Abrasive Waterjet Machining of GFRP Composites, Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi, 2024, 3(1), p 35–43.10.69560/cujast.1497189 ↗