Comprehensive Investigation of Scan Strategies and Infill Patterns on the Flexural, Thermal, and Microstructural Behavior of Powder Bed Fusion-Laser Beam-Processed 17-4 PH Stainless Steel

1. X. Zhai, L. Jin, and J. Jiang, A Survey of Additive Manufacturing Reviews, Mater. Sci. Addit. Manuf., 2022, 1(4), 21. https://doi.org/10.18063/msam.v1i4.2110.18063/msam.v1i4.21 ↗

2. M.A. Aripin et al., Effects of Build Orientations on Microstructure Evolution, Porosity Formation, and Mechanical Performance of Selective Laser Melted 17-4 Ph Stainless Steel, Metals, 2022, 12(11), 1968. https://doi.org/10.3390/MET1211196810.3390/MET12111968 ↗

3. S. Singh, S. Ramakrishna, and R. Singh, Material Issues in Additive Manufacturing: A Review, J. Manuf. Process., 2017, 25, p 185–200. https://doi.org/10.1016/j.jmapro.2016.11.00610.1016/j.jmapro.2016.11.006 ↗

4. M. K. Ian Gibson, David Rosen, Brent Stucker, 2020. Additive Manufacturing Technologies. https://doi.org/10.1007/978-3-030-56127-7.10.1007/978-3-030-56127-7 ↗

5. B. Kalia, R. Singh, B. S. Pabla, and G. Singh, "On 17-4PH stainless steel dental implant for premolar 4 in canine under compressive loading: effect of solid and octet metastructure," Open Explor. 2019 14, vol. 1, no. 4, pp. 202–214, Aug. 2024, https://doi.org/10.37349/EBMX.2024.00015.10.37349/EBMX.2024.00015 ↗

6. M.A. Aripin et al., Microstructure and Mechanical Properties of Selective Laser Melted 17–4 Ph Stainless Steel; Build Direction and Heat Treatment Processes, Mater. Today Commun., 2023, 36, 106479. https://doi.org/10.1016/j.mtcomm.2023.10647910.1016/j.mtcomm.2023.106479 ↗

7. P. Ponnusamy, S.H. Masood, S. Palanisamy, R.A. Rahman Rashid, and D. Ruan, Characterization of 17-4PH Alloy Processed by Selective Laser Melting, Mater. Today Proc., 2017, 4(8), p 8498–8506. https://doi.org/10.1016/j.matpr.2017.07.19610.1016/j.matpr.2017.07.196 ↗

8. B. Kalia, R. Singh, and B. S., Pabla, On Development and Characterization of Functionally Graded Material with Minor to Considerable Melting Temperature Variation Processed by Laser Powder Bed Fusion," J, Eng. Perform, Mater, 2025. https://doi.org/10.1007/S11665-025-11814-1/FIGURES/610.1007/S11665-025-11814-1/FIGURES/6 ↗

9. M.A. Aripin, Z. Sajuri, J. Syarif, A.H. Baghdadi, and I.F. Mohamed, Evaluation of Microstructure and Porosity for 3d Printed Stainless Steel, Mater. Today Proc., 2022, 66, p 3082–3086. https://doi.org/10.1016/J.MATPR.2022.07.39610.1016/J.MATPR.2022.07.396 ↗

10. S.L. Sing, J. An, W.Y. Yeong, and F.E. Wiria, Laser and Electron‐Beam Powder‐Bed Additive Manufacturing of Metallic Implants: A Review on Processes, Materials and Designs, J. Orthop. Res., 2016, 34(3), p 369–385. https://doi.org/10.1002/JOR.2307510.1002/JOR.23075 ↗

11. A. Alqutaibi, M. Alghauli, M. Aljohani, M. Z.- Bioprinting, and undefined 2024, "Advanced additive manufacturing in implant dentistry: 3D printing technologies, printable materials, current applications and future requirements," Elsevier, Accessed: Oct. 17, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S240588662400028910.1016/j.bprint.2024.e00356 ↗

12. G. M.-J. of maxillofacial and oral surgery and undefined, 2021 "Surface Roughness of Dental Implant and Osseointegration SpringerGRM MatosJournal Maxillofac. oral surgery. https://doi.org/10.1007/S12663-020-01437-510.1007/S12663-020-01437-5 ↗

13. B. Kalia, R. Singh, and B.S. Pabla, On the Effect of Unit Cell Dimensions in Octet Auxetic Structure Fabricated by Laser Powder Bed Fusion", J Eng. Perform, Mater, 2025. https://doi.org/10.1007/S11665-025-12002-X/FIGURES/1110.1007/S11665-025-12002-X/FIGURES/11 ↗

14. I. Mutlu, Biocompatibility of 17-4 PH Stainless Steel Foam for Implant Applications, Bio-Med. Mater. Eng., 2011, 21(4), p 223–233. https://doi.org/10.3233/BME-2011-067110.3233/BME-2011-0671 ↗

15. D. R.-C.-A. D. and Applications and undefined 2007. Computer-aided design for additive manufacturing of cellular structures.Taylor Fr. RosenComputer-Aided Des. Appl. 2007•Taylor Fr., vol. 4, no. 5, pp. 585–594, Jan. 2007, https://doi.org/10.1080/+16864360.2007.10738493.10.1080/+16864360.2007.10738493 ↗

16. N. Korshunova et al., "Bending behavior of additively manufactured lattice structures: numerical characterization and experimental validation," Jan. 2021, Accessed: Jul. 03, 2025. [Online]. Available: http://arxiv.org/abs/2101.09034

17. V. Deshpande, M. Ashby, N. F.-A. materialia, and undefined 2001, "Foam topology: bending versus stretching dominated architectures," ElsevierVS Deshpande, MF Ashby, NA FleckActa Mater. 2001•Elsevier, Accessed: Jul. 03, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S1359645400003797

18. E. Jost, D. Moore, C. S.-A. M. Letters, and undefined 2021, "Evolution of global and local deformation in additively manufactured octet truss lattice structures," Elsevier, Accessed: Jul. 03, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S277236902100010410.1016/j.addlet.2021.100010 ↗

19. P.T. Doutre, C. Grandvallet, L. Gobet, F. Vignat, and R. Dendievel, Influence of fillets onto mechanical properties of octet-truss lattice structures, L Gobet, F Vignat, R DendievelThe Int. J. Adv. Manuf. Technol, SpringerPT Doutre, C Gd, 2024. https://doi.org/10.1007/S00170-024-13512-Z10.1007/S00170-024-13512-Z ↗

20. B. Kalia, M. Husain, R. Singh, and B.S. Pabla, On the Use of 17-4 Precipitate Hardened Stainless Steel Waste Powder for 3d Printing of Implants with Tuneable Stress Shielding Capabilities, J. Mater. Eng. Perform., 2025, 34(13), p 13547–13561. https://doi.org/10.1007/S11665-024-10143-Z/TABLES/410.1007/S11665-024-10143-Z/TABLES/4 ↗

21. H. Fayazfar, M. Salarian, A. Rogalsky, D. S.-M. & Design, and undefined 2018, "A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties," ElsevierH Fayazfar, M Salarian, A Rogalsky, D Sarker, P Russo, V Paserin, E ToyserkaniMaterials Des. 2018•Elsevier, Accessed: Jul. 03, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S026412751830097210.1016/j.matdes.2018.02.018 ↗

22. R. R. Dehoff et al., 2015"Site specific control of crystallographic grain orientation through electron beam additive manufacturing," journals.sagepub.comRR Dehoff, MM Kirka, WJ Sames, H Bilheux AS Tremsin LE Lowe SS BabuMaterials Sci. Technol https://doi.org/10.1179/1743284714Y.0000000734.10.1179/1743284714Y.0000000734 ↗

23. D. L. N. Agathe Grémare,, Vera Guduric, Reine Bareille, Valérie Heroguez, Simon Latour, Nicolas L’Heureux, Jean$Christophe Fricain, Sylvain Catros, "Characterization of printed PLA scaffolds for bone tissue engineering," pp. 1–24.

24. H. Ali, L. Ma, H. Ghadbeigi, K. M.-M. S., and E. A, and undefined 2017, "In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of," Elsevier, Accessed: Jul. 03, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0921509317304768

25. W. King, A. T. Anderson, R. M. Ferencz, N. E. Hodge, C. Kamath, and S. A. Khairallah, 2015 "Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory," journals.sagepub.comW King, Anderson, RM Ferencz, NE Hodge, C Kamath, SA KhairallahMaterials Sci. Technol. https://doi.org/10.1179/1743284714Y.0000000728.10.1179/1743284714Y.0000000728 ↗

26. T. DebRoy, H. Wei, J. Zuback, … T. M.-P. in materials, and undefined 2018, "Additive manufacturing of metallic components–process, structure and properties," ElsevierT DebRoy, HL Wei, JS Zuback, T Mukherjee, JW Elmer, JO Milewski, AM BeeseProgress Mater. Sci. 2018•Elsevier, Accessed: Jul. 03, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0079642517301172

27. Y. Sun, R. Hebert, M. A.-M. & Design, and undefined 2018, "Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel," ElsevierY Sun, RJ Hebert, M AindowMaterials Des. 2018•Elsevier, Accessed: Jul. 03, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S026412751830543410.1016/j.matdes.2018.07.015 ↗

28. R. Rashid, S.H. Masood, D. Ruan, S. Palanisamy, R.A. Rashid, and M. Brandt, Effect of Scan Strategy on Density and Metallurgical Properties of 17-4ph Parts Printed by Selective Laser Melting (SLM), J. Mater. Process. Technol., 2017, 249, p 502–511. https://doi.org/10.1016/J.JMATPROTEC.2017.06.02310.1016/J.JMATPROTEC.2017.06.023 ↗

29. J. Yu, E. Wang, J. Li, and Z. Zheng, Static and Low-Velocity Impact Behavior of Sandwich Beams with Closed-Cell Aluminum-Foam Core in Three-Point Bending, Int. J. Impact Eng, 2008, 35(8), p 885–894. https://doi.org/10.1016/j.ijimpeng.2008.01.00610.1016/j.ijimpeng.2008.01.006 ↗

30. G. Sun, X. Huo, D. Chen, Q. L.-M. & Design, and undefined 2017, "Experimental and numerical study on honeycomb sandwich panels under bending and in-panel compression," ElsevierG Sun, X Huo, D Chen, Q LiMaterials Des. 2017•Elsevier, Accessed: Jul. 05, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0264127517307347

31. W. He et al., "Effect of structural parameters on low-velocity impact behavior of aluminum honeycomb sandwich structures with CFRP face sheets," ElsevierW He, L Yao, X Meng, G Sun, D Xie, J LiuThin-Walled Struct. 2019•Elsevier, Accessed: Jul. 05, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S026382311831074710.1016/j.tws.2019.01.022 ↗

32. A. Shaikh et al., Towards Gradient Design of Tpms Lattices and Laser Powder Bed Fusion Processing– Role of Laser Strategies and Lattice Thickness, Manuf. Lett., 2024, 41, p 1046–1054. https://doi.org/10.1016/j.mfglet.2024.09.12910.1016/j.mfglet.2024.09.129 ↗

33. N. Li et al., Tensile Properties and Microstructural Evolution of 17–4 Ph Stainless Steel Fabricated by Laser Hybrid Additive Manufacturing Technology, Int. J. Plast., 2024, 173, 103885. https://doi.org/10.1016/J.IJPLAS.2024.10388510.1016/J.IJPLAS.2024.103885 ↗

34. H. Irrinki, J. Jangam, S. Pasebani, S. Badwe, J. S.-P. Technology, and undefined 2018, "Effects of particle characteristics on the microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser-powder bed fusion," Elsevier, Accessed: Jul. 05, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S003259101830216X10.1016/j.powtec.2018.03.025 ↗

35. R. Singh, R. Singh, and I. Ahuja, "On thermomechanical properties of 17-4 PH stainless steel processed by using laser powder bed fusion: Effect of scanning strategies and infill patterns," J. Mater. Eng. Perform., no. 434, pp. 1–15, 2025, [Online]. Available: https://ejournal3.undip.ac.id/index.php/jamt/article/view/510110.1007/s11665-025-12662-9 ↗

36. U. Tasci, T. Y.-S. and Technology, an I. Journal, and undefined 2025, "Investigation of mechanical and wear properties of 17–4 PH materials produced with different patterns in atomic diffusion additive manufacturing technology," Elsevier, Accessed: Oct. 17, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S221509862500172710.1016/j.jestch.2025.102117 ↗

37. P. Steck, D. Schuler, C. Witzgall, S. W.- Materials, and undefined 2024, "A New Slicer-Based Method to Generate Infill Inspired by Sandwich-Patterns for Reduced Material Consumption," mdpi.comP Steck, D Schuler, C Witzgall, S WartzackMaterials, 2024•mdpi.com, Accessed: Oct. 17, 2025. [Online]. Available: https://www.mdpi.com/1996-1944/17/22/559610.3390/ma17225596 ↗

38. N.S. Hmeidat, B. Brown, X. Jia, N. Vermaak, and B. Compton, Effects of Infill Patterns on the Strength and Stiffness of 3d Printed Topologically Optimized Geometries, Rapid Prototyp. J., 2021, 27(8), p 1467–1479. https://doi.org/10.1108/RPJ-11-2019-0290/FULL/HTML10.1108/RPJ-11-2019-0290/FULL/HTML ↗

39. A. Agrawal, V. Kumar, J. Kumar, P. P.- Heliyon, and undefined 2023, "An investigation of combined effect of infill pattern, density, and layer thickness on mechanical properties of 3D printed ABS by fused filament fabrication," cell.comAP Agrawal, V Kumar, J Kumar, P Paramasivam, S Dhanasekaran, L PrasadHeliyon, 2023•cell.com, Accessed: Oct. 17, 2025. [Online]. Available: https://www.cell.com/heliyon/fulltext/S2405-8440(23)03738-610.1016/j.heliyon.2023.e16531 ↗

40. A. Borgenstam, A. Engström, L. Höglund, and J. Ågren, DICTRA, A Tool for Simulation of Diffusional Transformations in Alloys, J. Phase Equilibria, 2000, 21(3), p 269–280. https://doi.org/10.1361/105497100770340057/METRICS10.1361/105497100770340057/METRICS ↗

41. H. L. . Lukas, S. G. . Fries, and B. Sundman, "Computational thermodynamics: the CALPHAD method," p. 313, 2007.10.1017/CBO9780511804137 ↗

42. J.P. Kruth, L. Froyen, J. Van Vaerenbergh, P. Mercelis, M. Rombouts, and B. Lauwers, Selective Laser Melting of Iron-Based Powder, J. Mater. Process. Technol., 2004, 149, p 616–622. https://doi.org/10.1016/j.jmatprotec.2003.11.05110.1016/j.jmatprotec.2003.11.051 ↗

43. I. KartikeyaSarma, N. Selvaraj, and A. Kumar, Influence of Scanning Strategies on Microstructure, Residual Stress, and Corrosion Behavior of 17-4 Ph Stainless Steel Fabricated by Selective Laser Melting, Proc. Inst. Mech. Eng. E J. Process Mech. Eng., 2023, 237(3), p 690–701. https://doi.org/10.1177/0954408922110626310.1177/09544089221106263 ↗

44. A. Shaikh, J. Griffis, R. Stebbins, … K. S.-M., and undefined 2024, "Towards gradient design of TPMS lattices and laser powder bed fusion processing–Role of laser strategies and lattice thickness," Elsevier, Accessed: Sep. 04, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S221384632400192510.1016/j.mfglet.2024.09.129 ↗

45. S.A. Khairallah, A.T. Anderson, A. Rubenchik ,and W.E. King, Laser Powder-Bed Fusion Additive Manufacturing: Physics of Complex Melt Flow and Formation Mechanisms of Pores, Spatter, and Denudation Zones, Acta Mater., 2016, 108, p 36–45. https://doi.org/10.1016/j.actamat.2016.02.01410.1016/j.actamat.2016.02.014 ↗

46. H. Lv et al., The Effect of Process-Induced Porosity on Fatigue Properties of Ti6al4v Alloy Via High-Power Direct Energy Deposition, Coatings, 2022, 12(6), 822. https://doi.org/10.3390/COATINGS1206082210.3390/COATINGS12060822 ↗

47. M. Strantza et al., Effect of the Scanning Strategy on the Formation of Residual Stresses in Additively Manufactured Ti-6al-4v, Addit. Manuf., 2021, 45, 102003. https://doi.org/10.1016/J.ADDMA.2021.10200310.1016/J.ADDMA.2021.102003 ↗

48. H. Ali, H. Ghadbeigi, and K. Mumtaz, Effect of Scanning Strategies on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6al4v, Mater. Sci. Eng. A, 2018, 712, p 175–187. https://doi.org/10.1016/J.MSEA.2017.11.10310.1016/J.MSEA.2017.11.103 ↗

49. J.D. Hunt, Steady State Columnar and Equiaxed Growth of Dendrites and Eutectic, Mater. Sci. Eng., 1984, 65(1), p 75–83. https://doi.org/10.1016/0025-5416(84)90201-510.1016/0025-5416(84)90201-5 ↗

50. A.K. Mishra and A. Kumar, Effect of Process Parameters on Melt Pool Characteristics and Solidification Process During Laser Powder Bed Fusion of Alsi10mg Alloy, Lasers Manuf. Mater. Process., 2024, 11(2), p 260–283. https://doi.org/10.1007/s40516-023-00243-410.1007/s40516-023-00243-4 ↗

51. P. H.-A. Manufacturing and undefined 2018, "Melt pool temperature and cooling rates in laser powder bed fusion," ElsevierPA HooperAdditive Manuf. 2018•Elsevier, Accessed: Sep. 06, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S221486041830188X

52. S. Bergmueller, J. Scheiber, L. K.-A. Manufacturing, and undefined 2023, "Enhancing equiaxed grain formation in a high-alloy tool steel using dual laser powder bed fusion," ElsevierS Bergmueller, J Scheiber, L Kaserer, G LeichtfriedAdditive Manuf. 2023•Elsevier, Accessed: Sep. 07, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S221486042300340810.1016/j.addma.2023.103727 ↗

53. Y. He, B. W.-A. Manufacturing, and undefined 2022, "A solidification mode selection process map for laser powder bed fusion additive manufacturing of B-modified Ti6Al4V," ElsevierY He, B WeblerAdditive Manuf. 2022•Elsevier, Accessed: Sep. 07, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S221486042200476610.1016/j.addma.2022.103086 ↗

54. Z. Zhang, T. Zhang, C. Sun, S. Karna, L. Y.- Micromachines, and undefined 2024, "Understanding melt pool behavior of 316L stainless steel in laser powder bed fusion additive manufacturing," mdpi.comZ Zhang, T Zhang, C Sun, S Karna, L YuanMicromachines, 2024•mdpi.com, Accessed: Sep. 07, 2025. [Online]. Available: https://www.mdpi.com/2072-666X/15/2/17010.3390/mi15020170 ↗

55. R. Singh, R. Singh and I. Ahuja, On the Pre-Processing Temperature of Fallow Primary and Secondary Recycled Stainless Steel Powder for Powder Bed Fusion, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 2025 https://doi.org/10.1177/0954406225137084810.1177/09544062251370848 ↗

56. S. Waqar, H. Khan, A. Nazir, C. Chen, … U. Q.-A. M., and undefined 2025, "Thermal Variables Evolution Inside Melt Pool during LPBF of 316L Stainless Steel: A Numerical Approach," Elsevier, Accessed: Sep. 07, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S295043172500046210.1016/j.amf.2025.200236 ↗

57. A. Mishra, Effect of Process Parameters on Melt Pool Characteristics and Solidification Process During Laser Powder Bed Fusion of Alsi10mg Alloy, Lasers Manuf. Mater. Process., 2024, 11(2), p 260–283. https://doi.org/10.1007/S40516-023-00243-410.1007/S40516-023-00243-4 ↗

58. Y. Tian, D. Tomus, A. Huang and X. Wu, Melt Pool Morphology and Surface Roughness Relationship for Direct Metal Laser Solidification of Hastelloy X, Rapid Prototyp. J., 2020, 26(8), p 1389–1399. https://doi.org/10.1108/RPJ-08-2019-021510.1108/RPJ-08-2019-0215 ↗

59. Y. Wang et al., "The optimum grain size for strength-ductility combination in metals," ElsevierY Wang, C Huang, X Ma, J Zhao, F Guo, X Fang, Y Zhu, Y WeiInternational J. Plast. 2023•Elsevier, Accessed: Oct. 18, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S074964192300060810.1016/j.ijplas.2023.103574 ↗

60. D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann, Additive Manufacturing of Metals, Acta Mater., 2016, 117, p 371–392. https://doi.org/10.1016/j.actamat.2016.07.01910.1016/j.actamat.2016.07.019 ↗