Tribological Properties of High-Manganese Steel Coatings by Laser Wire Cladding and Ultrasonic Rolling

1. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and, D. Barbier, High Manganese Austenitic Twinning Induced Plasticity Steels: A Review of the Microstructure Properties Relationships, Curr. Opin. Solid State Mater. Sci., 2011, 15, p 141–168. https://doi.org/10.1016/j.cossms.2011.04.00210.1016/j.cossms.2011.04.002 ↗

2. R. Rana, Special Issue on ‘Medium Manganese Steels,’ Mater. Sci. Technol., 2019, 35, p 2039–2044. https://doi.org/10.1080/02670836.2019.167397110.1080/02670836.2019.1673971 ↗

3. J. Chu, L. Zhang, J. Yang, Y. Bao, N. Ali, and, C. Zhang, Characterization of Precipitation, Evolution, and Growth of MnS Inclusions in Medium/High Manganese Steel During Solidification Process, Mater Charact, 2022, 194, 112367. https://doi.org/10.1016/j.matchar.2022.11236710.1016/j.matchar.2022.112367 ↗

4. M. Lindroos, G. Cailletaud, A. Laukkanen, and, V.-T. Kuokkala, Crystal Plasticity Modeling and Characterization of the Deformation Twinning and Strain Hardening in Hadfield Steels, Mater. Sci. Eng. A, 2018, 720, p 145–159. https://doi.org/10.1016/j.msea.2018.02.02810.1016/j.msea.2018.02.028 ↗

5. C. Chen, B. Lv, H. Ma, D. Sun, and, F. Zhang, Wear Behavior and the Corresponding Work Hardening Characteristics of Hadfield Steel, Tribol. Int., 2018, 121, p 389–399. https://doi.org/10.1016/j.triboint.2018.01.04410.1016/j.triboint.2018.01.044 ↗

6. D.V. Lychagin, A.V. Filippov, O.S. Novitskaia, Y.I. Chumlyakov, E.A. Kolubaev, and, O.V. Sizova, Friction-Induced Slip Band Relief of -Hadfield Steel Single Crystal Oriented for Multiple Slip Deformation, Wear, 2017, 374–375, p 5–14. https://doi.org/10.1016/j.wear.2016.12.02810.1016/j.wear.2016.12.028 ↗

7. I. Mejía, A. Bedolla-Jacuinde, and, J.R. Pablo, Sliding Wear Behavior of a High-Mn Austenitic Twinning Induced Plasticity (TWIP) Steel Microalloyed with Nb, Wear, 2013, 301, p 590–597. https://doi.org/10.1016/j.wear.2013.01.05410.1016/j.wear.2013.01.054 ↗

8. J. Wang, Q. Wang, X. Zhang, and, D. Zhang, Impact and Rolling Abrasive Wear Behavior and Hardening Mechanism for Hot-Rolled Medium-Manganese Steel, J. Tribol., 2018, 140, 031608. https://doi.org/10.1115/1.403841410.1115/1.4038414 ↗

9. J. Pei, H. Yang, Y. He, K. Chen, H. Wang, X. Liu, and, S. Liu, Microstructure Evolution and Property of High Manganese Steel Coatings by Laser Shock Assisted Laser Wire Cladding, J. Mater. Process. Technol., 2024, 328, 118413. https://doi.org/10.1016/j.jmatprotec.2024.11841310.1016/j.jmatprotec.2024.118413 ↗

10. H. Guan, L. Chai, Y. Wang, K. Xiang, L. Wu, H. Pan, M. Yang, C. Teng, and, W. Zhang, Microstructure and Hardness of NbTiZr and NbTaTiZr Refractory Medium-Entropy Alloy Coatings on Zr Alloy by Laser Cladding, Appl. Surf. Sci., 2021, 549, 149338. https://doi.org/10.1016/j.apsusc.2021.14933810.1016/j.apsusc.2021.149338 ↗

11. Y. Yu, J. Wang, J. Li, H. Kou, H. Duan, J. Li, and, W. Liu, Tribological Behavior of AlCoCrCuFeNi and AlCoCrFeNiTi0.5 High Entropy Alloys Under Hydrogen Peroxide Solution Against Different Counterparts, Tribol. Int., 2015, 92, p 203–210. https://doi.org/10.1016/j.triboint.2015.06.01310.1016/j.triboint.2015.06.013 ↗

12. B. Gu, Effect of Ultrasonic Impact on the Microstructure and Properties of 30%WC-Ni Ceramic Coatings by Laser Cladding, (n.d.).

13. X.-B. Liu, X.-J. Meng, H.-Q. Liu, G.-L. Shi, S.-H. Wu, C.-F. Sun, M.-D. Wang, and, L.-H. Qi, Development and Characterization of Laser Clad High Temperature Self-Lubricating Wear Resistant Composite Coatings on Ti–6Al–4V Alloy, Mater. Des., 2014, 55, p 404–409. https://doi.org/10.1016/j.matdes.2013.09.03810.1016/j.matdes.2013.09.038 ↗

14. Z.-X. Zhu, Effects of Cu/Si on the Microstructure and Tribological Properties of FeCoCrNi High Entropy Alloy Coating by Laser Cladding, (2023).10.1016/j.wear.2022.204533 ↗

15. B. Gu, Effects of Ultrasonic Impact Treatment on the Corrosion Resistance of Laser-Cladded CrMnFeCoNi High-Entropy Alloy Coatings, Coatings Technology (2024).10.1016/j.surfcoat.2024.131102 ↗

16. C.M. Caneda, J.B. Fogagnolo, C.S. Kiminami, and, C.R.M. Afonso, Ultrafine Eutectic Coatings from Fe-Nb-B Powder Using Laser Cladding, Mater Charact, 2020, 160, 110080. https://doi.org/10.1016/j.matchar.2019.11008010.1016/j.matchar.2019.110080 ↗

17. F.-Z. Zhang, Insights Into Robust Carbon Nanotubes in Tribology: From Nano to Macro, 74 (2024).10.1016/j.mattod.2024.03.001 ↗

18. L. Jiang, Laser Shock Peening of Laser Melting Deposited TiAl Alloy for Enhancing its Corrosion Resistance, Coatings Technology (2024).10.1016/j.surfcoat.2024.130745 ↗

19. H. Ding, T. Yang, W. Wang, Y. Zhu, Q. Lin, J. Guo, Q. Xiao, L. Gan, and, Q. Liu, Optimization and Wear Behaviors of 316L Stainless Steel Laser Cladding on Rail Material, Wear, 2023, 523, 204830. https://doi.org/10.1016/j.wear.2023.20483010.1016/j.wear.2023.204830 ↗

20. H. Ding, X. Mu, Y. Zhu, W. Yang, Q. Xiao, W. Wang, Q. Liu, J. Guo, and, Z. Zhou, Effect of Laser Claddings of Fe-Based Alloy Powder with Different Concentrations of WS2 on the Mechanical and Tribological Properties of Railway Wheel, Wear, 2022, 488–489, 204174. https://doi.org/10.1016/j.wear.2021.20417410.1016/j.wear.2021.204174 ↗

21. H. Liu, R. Wang, Q. Wang, P. Chen, H. Yang, J. Hao, S. Sun, and, X. Liu, Tribology Behavior in Laser Cladded Dual-Phase AlxCoCrFeNiMn(1–x) High Entropy Alloys Influenced by Hierarchical Interface Architecture, Surf. Coat. Technol., 2023, 471, 129895. https://doi.org/10.1016/j.surfcoat.2023.12989510.1016/j.surfcoat.2023.129895 ↗

22. Q. Luo, and J. Zhu, Wear Property and Wear Mechanisms of High-Manganese Austenitic Hadfield Steel in Dry Reciprocal Sliding, Lubricants, 2022, 10, p 37. https://doi.org/10.3390/lubricants1003003710.3390/lubricants10030037 ↗

23. B. Gu, Study on the Effects of Ultrasonic Impact Treatment on the Local Mechanical Properties of Welded Joints Based on the Digital Image Correlation, (2025).10.1016/j.measurement.2024.115441 ↗

24. D. Sun, Tribology Comparison of Laser-Cladded CrMnFeCoNi Coatings Reinforced by Three Types of Ceramic (TiC/NbC/B4C), Coatings Technology (2022).10.1016/j.surfcoat.2022.129013 ↗

25. H. Qin, Z. Ren, J. Zhao, C. Ye, G.L. Doll, and, Y. Dong, Effects of Ultrasonic Nanocrystal Surface Modification on the Wear and Micropitting Behavior of Bearing Steel in Boundary Lubricated Steel-Steel Contacts, Wear, 2017, 392–393, p 29–38. https://doi.org/10.1016/j.wear.2017.09.01210.1016/j.wear.2017.09.012 ↗

26. Z.-R. Zhang, and W.-X. Liu, Mechanical Properties of Fe3Al-Based Alloys with Addition of Carbon, Niobium and Titanium, Mater. Sci. Eng. A, 2006, 423, p 343–349. https://doi.org/10.1016/j.msea.2006.02.03110.1016/j.msea.2006.02.031 ↗

27. D. Chen, Y. Hu, L. Guo, Y. Chang, R. Zeng, M. Wang, B. Su, D. Chen, J. Liu, and, K. Liu, The Modified Wear Resistance of Uranium Induced by Ultrasonic Surface Rolling Process, Wear, 2022, 502–503, 204390. https://doi.org/10.1016/j.wear.2022.20439010.1016/j.wear.2022.204390 ↗

28. J. Yang, D. Liu, X. Zhang, M. Liu, W. Zhao, and, C. Liu, The Effect of Ultrasonic Surface Rolling Process on the Fretting Fatigue PROPERTY of GH4169 Superalloy, Int. J. Fatigue, 2020, 133, 105373. https://doi.org/10.1016/j.ijfatigue.2019.10537310.1016/j.ijfatigue.2019.105373 ↗

29. X. Zhu, J. Pan, D. Liu, X. Zhao, and, R. Ren, Rolling Contact Fatigue Resistance and Damage Evolution of Carburized Bearing Steel Treated by Surface Ultrasonic Rolling Process (SURP), Wear, 2023, 524–525, 204773. https://doi.org/10.1016/j.wear.2023.20477310.1016/j.wear.2023.204773 ↗

30. Z. Liang, Z. Li, X. Li, H. Li, Z. Cai, X. Liu, Y. Chen, L. Xie, T. Zhou, and, X. Wang, Experimental Study on Surface Integrity and Fatigue life of an Ultra-High Strength Steel by the Composite Strengthening Process of Pre-Torsion and Ultrasonic Rolling, Eng. Fail. Anal., 2023, 150, 107333. https://doi.org/10.1016/j.engfailanal.2023.10733310.1016/j.engfailanal.2023.107333 ↗

31. L.X. Lu, J. Sun, L. Li, and, Q.C. Xiong, Study on Surface Characteristics of 7050–T7451 Aluminum Alloy by Ultrasonic Surface Rolling Process, Int. J. Adv. Manuf. Technol., 2016, 87, p 2533–2539. https://doi.org/10.1007/s00170-016-8659-410.1007/s00170-016-8659-4 ↗

32. C. Bai, L. Lan, R. Xin, S. Gao, and, B. He, Microstructure Evolution and Cyclic Deformation Behavior of Ti-6Al-4 V Alloy Via Electron Beam Melting During Low Cycle Fatigue, Int. J. Fatigue, 2022, 159, 106784. https://doi.org/10.1016/j.ijfatigue.2022.10678410.1016/j.ijfatigue.2022.106784 ↗

33. J.J. Wang, Z.X. Wen, X.H. Zhang, Y.C. Zhao, and, Z.F. Yue, Effect Mechanism and Equivalent Model of Surface Roughness on Fatigue Behavior of Nickel-Based Single Crystal Superalloy, Int. J. Fatigue, 2019, 125, p 101–111. https://doi.org/10.1016/j.ijfatigue.2019.03.04110.1016/j.ijfatigue.2019.03.041 ↗

34. Y.-L. Zhang, F.-Q. Lai, S.-G. Qu, H.-P. Liu, D.-S. Jia, and, S.-F. Du, Effect of Ultrasonic Surface Rolling on Microstructure and Rolling Contact Fatigue Behavior of 17Cr2Ni2MoVNb Steel, Surf. Coat. Technol., 2019, 366, p 321–330. https://doi.org/10.1016/j.surfcoat.2019.03.06110.1016/j.surfcoat.2019.03.061 ↗

35. D. Chen, J. Liu, D. Chen, R. Li, C. Ma, M. Wang, P. Dong, D. Lang, Y. Hu, and, K. Liu, Influence of Ultrasonic Surface Rolling Process on Surface Characteristics and Micro-Mechanical Properties of Uranium, Mater. Chem. Phys., 2022, 279, 125741. https://doi.org/10.1016/j.matchemphys.2022.12574110.1016/j.matchemphys.2022.125741 ↗

36. X. Yu, J. Zhang, L. Wang, Z. Ding, C. Jin, and, Y. Zhao, Comparative Studies of Constitutive Properties of Nanocrystalline and Bulk Iron During Compressive Deformation, Acta Mater., 2011, 59, p 3384–3389. https://doi.org/10.1016/j.actamat.2011.02.01310.1016/j.actamat.2011.02.013 ↗

37. G. Li, S.G. Qu, Y.X. Pan, and, X.Q. Li, Effects of the Different Frequencies and Loads of Ultrasonic Surface Rolling on Surface Mechanical Properties and Fretting Wear Resistance of HIP Ti–6Al–4V Alloy, Appl. Surf. Sci., 2016, 389, p 324–334. https://doi.org/10.1016/j.apsusc.2016.07.12010.1016/j.apsusc.2016.07.120 ↗

38. K. Lee, S.-J. Park, J. Moon, J.-Y. Kang, T.-H. Lee, and, H.N. Han, β-Mn Formation and Aging Effect on the Fracture Behavior of High-Mn Low-Density Steels, Scripta Mater., 2016, 124, p 193–197. https://doi.org/10.1016/j.scriptamat.2016.04.04010.1016/j.scriptamat.2016.04.040 ↗

39. P. Wang, H. Guo, D. Wang, H. Duan, and, Y. Zhang, Microstructure and Tribological Performances of M50 Bearing Steel Processed by Ultrasonic Surface Rolling, Tribol. Int., 2022, 175, 107818. https://doi.org/10.1016/j.triboint.2022.10781810.1016/j.triboint.2022.107818 ↗

40. E. Garlea, H. Choo, G.Y. Wang, P.K. Liaw, B. Clausen, D.W. Brown, J. Park, P.D. Rack, and, E.A. Kenik, Hydride-Phase Formation and its Influence on Fatigue Crack Propagation Behavior in a Zircaloy-4 Alloy, Metall. Mater. Trans. A, 2010, 41, p 2816–2828. https://doi.org/10.1007/s11661-010-0342-z10.1007/s11661-010-0342-z ↗

41. J. Dang, H. Zhang, Q. An, G. Lian, Y. Li, H. Wang, and, M. Chen, Surface Integrity and Wear Behavior of 300M Steel Subjected to Ultrasonic Surface Rolling Process, Surf. Coat. Technol., 2021, 421, 127380. https://doi.org/10.1016/j.surfcoat.2021.12738010.1016/j.surfcoat.2021.127380 ↗

42. J. Hu, H. Song, S. Sandfeld, X. Liu, and, Y. Wei, Breakdown of Archard Law Due to Transition of Wear Mechanism from Plasticity to Fracture, Tribol. Int., 2022, 173, 107660. https://doi.org/10.1016/j.triboint.2022.10766010.1016/j.triboint.2022.107660 ↗

43. X.C. Liu, H.W. Zhang, and, K. Lu, Formation of Nano-Laminated Structure in Nickel by Means of Surface Mechanical Grinding Treatment, Acta Mater., 2015, 96, p 24–36. https://doi.org/10.1016/j.actamat.2015.06.01410.1016/j.actamat.2015.06.014 ↗

44. C. Ye, A. Telang, A.S. Gill, S. Suslov, Y. Idell, K. Zweiacker, J.M.K. Wiezorek, Z. Zhou, D. Qian, S.R. Mannava, and, V.K. Vasudevan, Gradient Nanostructure and Residual Stresses Induced by Ultrasonic Nano-crystal Surface Modification in 304 Austenitic Stainless Steel for High Strength and High Ductility, Mater. Sci. Eng. A, 2014, 613, p 274–288. https://doi.org/10.1016/j.msea.2014.06.11410.1016/j.msea.2014.06.114 ↗

45. Y. Zhang, L. Huang, F. Lu, S. Qu, V. Ji, X. Hu, and, H. Liu, Effects of Ultrasonic Surface Rolling on Fretting Wear Behaviors of a Novel 25CrNi2MoV Steel, Mater. Lett., 2021, 284, 128955. https://doi.org/10.1016/j.matlet.2020.12895510.1016/j.matlet.2020.128955 ↗

46. C. Liu, D. Liu, X. Zhang, D. Liu, A. Ma, N. Ao, and, X. Xu, Improving Fatigue Performance of Ti-6Al-4V Alloy Via Ultrasonic Surface Rolling Process, J. Mater. Sci. Technol., 2019, 35, p 1555–1562. https://doi.org/10.1016/j.jmst.2019.03.03610.1016/j.jmst.2019.03.036 ↗

47. W. Yan, L. Fang, K. Sun, and, Y. Xu, Effect of Surface Work Hardening on Wear Behavior of Hadfield Steel, Mater. Sci. Eng. A, 2007, 460–461, p 542–549. https://doi.org/10.1016/j.msea.2007.02.09410.1016/j.msea.2007.02.094 ↗

48. Y. Duan, S. Qu, S. Jia, and, X. Li, Effects of Ultrasonic Surface Rolling Processing on Microstructure and Wear Properties of High-Carbon High-Chromium Steel, Surf. Coat. Technol., 2021, 422, 127531. https://doi.org/10.1016/j.surfcoat.2021.12753110.1016/j.surfcoat.2021.127531 ↗

49. H. Yang, X. Liu, H. Guo, Y. He, J. Shi, H. Liu, J. Hao, and, S. Liu, Effect of Laser Surface Remelting on the Microstructure and Properties of High Manganese Steel Coating, Surf. Coat. Technol., 2025, 496, 131667. https://doi.org/10.1016/j.surfcoat.2024.13166710.1016/j.surfcoat.2024.131667 ↗

50. Y. Zhang, L. Wu, D. Shi, Z. Wang, H. Jin, L. Liu, S. Qu, and, V. Ji, Surface Integrity and Tribological Behavior of 17Cr2Ni2MoVNb Steel Under Combined Carburizing Treatment and Ultrasonic Rolling, Surf. Coat. Technol., 2023, 461, 129371. https://doi.org/10.1016/j.surfcoat.2023.12937110.1016/j.surfcoat.2023.129371 ↗