Enhanced Mechanical, Thermal and Electrical Properties of Additively Manufactured Polylactic Acid/Carbon Nanotube Polymer Nanocomposites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Polymer Nanocomposite Synthesis and Irradiation · Nanotechnology research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. L.Y. Zhou, J. Fu, and Y. He, A Review of 3D Printing Technologies for Soft Polymer Materials, Adv. Funct. Mater., 2020, 30. https://doi.org/10.1002/adfm.20200018710.1002/adfm.202000187 ↗
2. Z. Liu, Y. Wang, and J. Shi, Tensile Performance of Fused Deposition Modeling PA 6 Polymer Composites with Nanoparticle Reinforcement and/or Continuous Fiber Reinforcement, J. Micro Nanomanuf., 2019, 15(18). https://doi.org/10.1115/1.404491310.1115/1.4044913 ↗
3. S. Bahl, Fiber Reinforced Metal Matrix Composites - A Review, Mater. Today Proc., 2020, 39(1), p 317–323. https://doi.org/10.1016/j.matpr.2020.07.42310.1016/j.compstruct.2021.113640 ↗
4. R. Hsissou, R. Seghiri, Z. Benzekri, M. Hilali, M. Rafik, and A. Elharfi, Polymer Composite Materials: A Comprehensive Review, Compos. Struct., 2021 https://doi.org/10.1016/j.compstruct.2021.11364010.1016/j.compstruct.2021.113640 ↗
5. K. Sanada, Y. Tada, and Y. Shindo, Thermal Conductivity of Polymer Composites with Close-Packed Structure of Nano and Micro Fillers, Compos. Part A Appl. Sci. Manuf., 2009, 40, p 724–730. https://doi.org/10.1016/j.compositesa.2009.02.02410.1016/j.compositesa.2009.02.024 ↗
6. J. Jordan, K.I. Jacob, R. Tannenbaum, M.A. Sharaf, and I. Jasiuk, Experimental Trends in Polymer Nanocomposites - A Review, Mater. Sci. Eng. A, 2005, 393, p 1–11. https://doi.org/10.1016/j.msea.2004.09.04410.1016/j.msea.2004.09.044 ↗
7. S.M. Sabet, H. Mahfuz, A.C. Terentis, M. Nezakat, and J. Hashemi, Effects of POSS Functionalization of Carbon Nanotubes on Microstructure and Thermomechanical Behavior of Carbon Nanotube/Polymer Nanocomposites, J. Mater. Sci., 2018, 53, p 8963–8977. https://doi.org/10.1007/s10853-018-2182-y10.1007/s10853-018-2182-y ↗
8. K.I. Winey and R.A. Vaiva, Polymer Nanocomposites, MRS Bull., 2007, 32, p 314–319. https://doi.org/10.1557/mrs2007.22910.1557/mrs2007.229 ↗
9. S. Fu, Z. Sun, P. Huang, Y. Li, and N. Hu, Some Basic Aspects of Polymer Nanocomposites: A Critical Review, Nano Mater. Sci., 2019, 1, p 2–30. https://doi.org/10.1016/j.nanoms.2019.02.00610.1016/j.nanoms.2019.02.006 ↗
10. A. Ashothaman, J. Sudha, and N. Senthilkumar, A Comprehensive Review on Biodegradable Polylactic Acid Polymer Matrix Composite Material Reinforced with Synthetic and Natural Fibers, Mater. Today Proc., 2023, 80, p 2829–2839. https://doi.org/10.1016/j.matpr.2021.07.04710.1016/j.matpr.2021.07.047 ↗
11. O.A. Mohamed, S.H. Masood, and J.L. Bhowmik, Optimization of Fused Deposition Modeling Process Parameters: A Review of Current Research and Future Prospects, Adv. Manuf., 2015, 3, p 42–53. https://doi.org/10.1007/s40436-014-0097-710.1007/s40436-014-0097-7 ↗
12. A. Jaisingh Sheoran and H. Kumar, Fused Deposition Modeling Process Parameters Optimization and Effect on Mechanical Properties and Part Quality: Review and Reflection on Present Research, Mater. Today Proc., 2020, 21, p 1659–1672 https://doi.org/10.1016/j.matpr.2019.11.29610.1016/j.matpr.2019.11.296 ↗
13. N.N. Kumbhar and A.V. Mulay, Post Processing Methods Used to Improve Surface Finish of Products Which are Manufactured by Additive Manufacturing Technologies: A Review, J. Inst. Eng. Ser. C, 2018, 99, p 481–487. https://doi.org/10.1007/s40032-016-0340-z10.1007/s40032-016-0340-z ↗
14. U.K. uz Zaman, E. Boesch, A. Siadat, M. Rivette, and A.A. Baqai, Impact of Fused Deposition Modeling (FDM) Process Parameters on Strength of Built Parts Using Taguchi’s Design of Experiments, Int. J. Adv. Manuf. Technol., 2019, 101, p 1215–1226. https://doi.org/10.1007/s00170-018-3014-610.1007/s00170-018-3014-6 ↗
15. H. Chen, X. Yang, L. Chen, Y. Wang, and Y. Sun, Application of FDM Three-Dimensional Printing Technology in the Digital Manufacture of Custom Edentulous Mandible Trays, Sci. Rep., 2016, 6, 19207. https://doi.org/10.1038/srep1920710.1038/srep19207 ↗
16. A.J. Cresswell-Boyes, G.R. Davis, M. Krishnamoorthy, D. Mills, and A.H. Barber, Composite 3D Printing of Biomimetic Human Teeth, Sci. Rep., 2022, 12, 7830. https://doi.org/10.1038/s41598-022-11658-y10.1038/s41598-022-11658-y ↗
17. P. Verma, T. Bansala, S.S. Chauhan, D. Kumar, S. Deveci, and S. Kumar, Electromagnetic Interference Shielding Performance of Carbon Nanostructure Reinforced, 3D Printed Polymer Composites, J. Mater. Sci., 2021, 56, p 11769–11788. https://doi.org/10.1007/s10853-021-05985-010.1007/s10853-021-05985-0 ↗
18. A. Jalali, R. Zhang, R. Rahmati, M. Nofar, M. Sain, and C.B. Park, Recent Progress and Perspective in Additive Manufacturing of EMI Shielding Functional Polymer Nanocomposites, Nano Res., 2023, 16, p 1–17. https://doi.org/10.1007/s12274-022-5053-410.1007/s12274-022-5053-4 ↗
19. N. Vidakis, M. Petousis, E. Velidakis, M. Liebscher, V. Mechtcherine, and L. Tzounis, On the Strain Rate Sensitivity of Fused Filament Fabrication (Fff) Processed pla, abs, petg, pa6, and pp Thermoplastic Polymers, Polymers (Basel), 2020, 12, p 1–15. https://doi.org/10.3390/polym1212292410.3390/polym12122924 ↗
20. D.K. Yadav, R. Srivastava, and S. Dev, Design & Fabrication of ABS Part by FDM for Automobile Application, Mater. Today Proc., 2019, 26, p 2089–2093 https://doi.org/10.1016/j.matpr.2020.02.45110.1016/j.matpr.2020.02.451 ↗
21. P.C. Ma, N.A. Siddiqui, G. Marom, and J.K. Kim, Dispersion and Functionalization of Carbon Nanotubes for Polymer-Based Nanocomposites: A Review, Compos. Part A Appl. Sci. Manuf., 2010, 41, p 1345–1367. https://doi.org/10.1016/j.compositesa.2010.07.00310.1016/j.compositesa.2010.07.003 ↗
22. A. Dantas de Oliveira and C. Augusto Gonçalves Beatrice, Polymer nanocomposites with different types of nanofiller. In: Nanocomposites - Recent Evolutions, IntechOpen, 2019. https://doi.org/10.5772/intechopen.81329.10.5772/intechopen.81329 ↗
23. J. Joy, E. George, P. Haritha, S. Thomas, and S. Anas, An Overview of Boron Nitride Based Polymer Nanocomposites, J. Polym. Sci., 2020, 58, p 3115–3141. https://doi.org/10.1002/pol.2020050710.1002/pol.20200507 ↗
24. J.C. Charlier, Defects in Carbon Nanotubes, Acc. Chem. Res., 2002, 35, p 1063–1069. https://doi.org/10.1021/ar010166k10.1021/ar010166k ↗
25. Y. Li, S. Wang, E. He, and Q. Wang, The Effect of Sliding Velocity on the Tribological Properties of Polymer/Carbon Nanotube Composites, Carbon N Y, 2016, 106, p 106–109. https://doi.org/10.1016/j.carbon.2016.04.07710.1016/j.carbon.2016.04.077 ↗
26. M.T.T. Huynh, T. Nakayama, A. Kawamoto, S.T. Nguyen, T. Suzuki, H. Suematsu, K. Niihara, H.B. Cho, and Y.H. Choa, Fabrication of Stacked-Cup Carbon Nanotube/Polymer Nanocomposite Films with Linear Controlled Percolation Routes, Mater. Chem. Phys., 2016, 171, p 39–44. https://doi.org/10.1016/j.matchemphys.2016.01.02710.1016/j.matchemphys.2016.01.027 ↗
27. B. Han, E. Guo, X. Xue, Z. Zhao, L. Luo, H. Qu, T. Niu, Y. Xu, and H. Hou, Fabrication and Densification of High Performance Carbon Nanotube/Copper Composite Fibers, Carbon N Y, 2017, 123, p 593–604. https://doi.org/10.1016/j.carbon.2017.08.00410.1016/j.carbon.2017.08.004 ↗
28. A.T. Lawal, Synthesis and Utilization of Carbon Nanotubes for Fabrication of Electrochemical Biosensors, Mater. Res. Bull., 2016, 73, p 308–350. https://doi.org/10.1016/j.materresbull.2015.08.03710.1016/j.materresbull.2015.08.037 ↗
29. G. Spinelli, P. Lamberti, V. Tucci, R. Ivanova, S. Tabakova, E. Ivanov, R. Kotsilkova, S. Cimmino, R. Di Maio, and C. Silvestre, Rheological and Electrical Behaviour of Nanocarbon/poly(lactic) Acid for 3D Printing Applications, Compos. B Eng., 2019, 167, p 467–476. https://doi.org/10.1016/j.compositesb.2019.03.02110.1016/j.compositesb.2019.03.021 ↗
30. L.S. De Bortoli, R. de Farias, D.Z. Mezalira, L.M. Schabbach, and M.C. Fredel, Functionalized Carbon Nanotubes for 3D-Printed PLA-Nanocomposites: Effects on Thermal and Mechanical Properties, Mater. Today Commun., 2022, 31. https://doi.org/10.1016/j.mtcomm.2022.10340210.1016/j.mtcomm.2022.103402 ↗
31. J. Slapnik, R. Bobovnik, M. Mešl, and S. Bolka, Modified Polylactide Filaments for 3D Printing With Improved Mechanical Properties, Contemp. Mater., 2016, 7. https://doi.org/10.7251/comen1602142s10.7251/comen1602142s ↗
32. J.M. Chacón, M.A. Caminero, E. García-Plaza, and P.J. Núñez, Additive Manufacturing of PLA Structures using Fused Deposition Modelling: Effect of Process Parameters on Mechanical Properties and their Optimal Selection, Mater. Des., 2017, 124, p 143–157. https://doi.org/10.1016/j.matdes.2017.03.06510.1016/j.matdes.2017.03.065 ↗
33. M. Mohammadi Zerankeshi, S.S. Sayedain, M. Tavangarifard, and R. Alizadeh, Developing a Novel Technique for the Fabrication of PLA-Graphite Composite Filaments Using FDM 3D Printing Process, Ceram. Int., 2022, 48, p 31850–31858. https://doi.org/10.1016/j.ceramint.2022.07.11710.1016/j.ceramint.2022.07.117 ↗
34. J.D. Kechagias, N. Vidakis, M. Petousis, and N. Mountakis, A multi-Parametric Process Evaluation of the Mechanical Response of PLA in FFF 3D Printing, Mater. Manuf. Process., 2023, 38, p 941–953. https://doi.org/10.1080/10426914.2022.208989510.1080/10426914.2022.2089895 ↗
35. J. Žarko, G. Vladić, M. Pál, and S. Dedijer, Influence of Printing Speed on Production of Embossing Tools using fdM 3d Printing Technology, J. Gr. Eng. Des., 2017, 8, p 19–27. https://doi.org/10.24867/JGED-2017-1-01910.24867/JGED-2017-1-019 ↗
36. C. Abeykoon, P. Sri-Amphorn, and A. Fernando, Optimization of Fused Deposition Modeling Parameters for Improved PLA and ABS 3D Printed Structures, Int. J. Lightweight Mater. Manuf., 2020, 3, p 284–297. https://doi.org/10.1016/j.ijlmm.2020.03.00310.1016/j.ijlmm.2020.03.003 ↗
37. A. Lanzotti, M. Grasso, G. Staiano, and M. Martorelli, The Impact of Process Parameters on Mechanical Properties of Parts Fabricated in PLA with an Open-Source 3-D Printer, Rapid Prototyp. J., 2015, 21, p 604–617. https://doi.org/10.1108/RPJ-09-2014-013510.1108/RPJ-09-2014-0135 ↗
38. S.L. Rodríguez-Reyna, C. Mata, J.H. Díaz-Aguilera, H.R. Acevedo-Parra, and F. Tapia, Mechanical Properties Optimization for PLA, ABS and Nylon + CF Manufactured by 3D FDM Printing, Mater. Today Commun., 2022 https://doi.org/10.1016/j.mtcomm.2022.10477410.1016/j.mtcomm.2022.104774 ↗
39. M. Popović, M. Pjević, A. Milovanović, G. Mladenović, and M. Milošević, Printing Parameter Optimization of PLA Material Concerning Geometrical Accuracy and Tensile Properties Relative to FDM Process Productivity, J. Mech. Sci. Technol., 2023, 37, p 697–706. https://doi.org/10.1007/s12206-023-0113-610.1007/s12206-023-0113-6 ↗
40. K.N. Amba Sankar, L. Kesavan, B. Saha, M.K. Jyolsnaraj, S. Mohan, P. Nandakumar, K. Mohanta, and C. Kvarnström, Kvarnström, Renewable Synthesis of MoO3 Nanosheets via Low Temperature Phase Transition for Supercapacitor Application, Sci. Rep., 2024 https://doi.org/10.1038/s41598-024-69765-x10.1038/s41598-024-69765-x ↗
41. M. Sarfraz, Upgrading Electrical, Mechanical, and Chemical Properties of CNTs/Polybond® Nanocomposites: Pursuit of Electroconductive Structural Polymer Nanocomplexes, Int. J. Polym. Sci., 2016 https://doi.org/10.1155/2016/239681710.1155/2016/2396817 ↗
42. F. Alam, V.R. Shukla, K.M. Varadarajan, and S. Kumar, Microarchitected 3D Printed Polylactic Acid (PLA) Nanocomposite Scaffolds for Biomedical Applications, J. Mech. Behav. Biomed. Mater., 2020 https://doi.org/10.1016/j.jmbbm.2019.10357610.1016/j.jmbbm.2019.103576 ↗
43. D. Rana, K. Bag, S.N. Bhattacharyya, and B.M. Mandal, Miscibility of poly(styrene-co-butyl acrylate) with poly(ethyl methacrylate): Existence of Both UCST and LCST, J. Polym Sci. B Polym. Phys., 2000, 38, p 369–375. https://doi.org/10.1002/(SICI)1099-0488(20000201)38:3%3c369::AID-POLB3%3e3.0.CO;2-W10.1002/(SICI)1099-0488(20000201)38:3<369::AID-POLB3>3.0.CO;2-W ↗
44. D. Rana, B.M. Mandal, and S.N. Bhattacharyya, Analogue Calorimetry of Polymer Blends: Poly(styrene-co-acrylonitrile) and Poly(phenyl acrylate) or Poly(vinyl benzoate), Polymer, 1996, 37(12), p 2439–2443. https://doi.org/10.1016/0032-3861(96)85356-010.1016/0032-3861(96)85356-0 ↗
45. M.M. Younus, H.M. Naguib, M. Fekry, and M.A. Elsawy, Pushing the Limits of PLA: Exploring the Power of MWCNTs in Enhancing Thermal, Mechanical Properties, and Weathering Resistance, Sci. Rep., 2023 https://doi.org/10.21203/rs.3.rs-2675459/v110.21203/rs.3.rs-2675459/v1 ↗
46. I.Y. Phang, J. Ma, L. Shen, T. Liu, and W. De Zhang, Crystallization and Melting Behavior of Multi-Walled Carbon Nanotube-Reinforced Nylon-6 Composites, Polym. Int., 2006, 55, p 71–79. https://doi.org/10.1002/pi.192010.1002/pi.1920 ↗
47. A.R. Bhattacharyya, T.V. Sreekumar, T. Liu, S. Kumar, L.M. Ericson, R.H. Hauge, and R.E. Smalley, Crystallization and Orientation Studies in Polypropylene/Single Wall Carbon Nanotube Composite, Polymer (Guildf), 2003, 44, p 2373–2377. https://doi.org/10.1016/S0032-3861(03)00073-910.1016/S0032-3861(03)00073-9 ↗
48. J.Z. Xu, T. Chen, C.L. Yang, Z.M. Li, Y.M. Mao, B.Q. Zeng, and B.S. Hsiao, Isothermal Crystallization of Poly(l -lactide) Induced by Graphene Nanosheets and Carbon Nanotubes: A Comparative Study, Macromolecules, 2010, 43, p 5000–5008. https://doi.org/10.1021/ma100304n10.1021/ma100304n ↗
49. S. Chopra, K.A. Deshmukh, A.D. Deshmukh, C.L. Gogte, and D. Peshwe, Prediction, Evaluation and Mechanism Governing Interphase Strength in Tensile Fractured PA-6/MWCNT Nanocomposites, Compos. Part A Appl. Sci. Manuf., 2018, 112, p 255–262. https://doi.org/10.1016/j.compositesa.2018.06.01210.1016/j.compositesa.2018.06.012 ↗
50. W. Siriprom, N. Sangwaranatee, Herman, K. Chantarasunthon, K. Teanchai, N. Chamchoi, Characterization and analyzation of the poly (L-lactic acid) (PLA) films, Mater. Today Proc., 2018, 5(7), p 14803–14806. https://doi.org/10.1016/j.matpr.2018.04.00910.1016/j.matpr.2018.04.009 ↗
51. P. Singla, R. Mehta, D. Berek, and S.N. Upadhyay, Microwave Assisted Synthesis of Poly(lactic acid) and its Characterization Using Size Exclusion Chromatography, J. Macromol. Sci. Part A Pure Appl. Chem., 2012, 49, p 963–970. https://doi.org/10.1080/10601325.2012.72285810.1080/10601325.2012.722858 ↗
52. J.P. Mofokeng, A.S. Luyt, T. Tábi, and J. Kovács, Comparison of Injection Moulded, Natural Fibre-Reinforced Composites with PP and PLA as Matrices, J. Thermoplast. Compos. Mater., 2012, 25, p 927–948. https://doi.org/10.1177/089270571142329110.1177/0892705711423291 ↗
53. R.J. Awale, F.B. Ali, A.S. Azmi, N.I.M. Puad, H. Anuar, and A. Hassan, Enhanced Flexibility of Biodegradable Polylactic Acid/Starch Blends Using Epoxidized Palm Oil as Plasticizer, Polymers (Basel), 2018 https://doi.org/10.3390/polym1009097710.3390/polym10090977 ↗
54. L.M. Galera Manzano, M.Á. Ruz Cruz, N.M. Moo Tun, A. Valadez González, and J.H. Mina Hernandez, Effect of Cellulose and Cellulose Nanocrystal Contents on the Biodegradation, under Composting Conditions, of Hierarchical PLA Biocomposites, Polymers (Basel), 2021 https://doi.org/10.3390/polym1311185510.3390/polym13111855 ↗
55. G. Satish, V.V.S. Prasad, and K. Ramji, Manufacturing and Characterization of CNT Based Polymer Composites, Math. Models Eng., 2017, 3, p 89–97. https://doi.org/10.21595/mme.2017.1912110.21595/mme.2017.19121 ↗
56. J. Li, Z. Song, L. Gao, and H. Shan, Preparation of Carbon Nanotubes/polylactic Acid Nanocomposites Using a Non-covalent Method, Polym. Bull., 2016, 73, p 2121–2128. https://doi.org/10.1007/s00289-015-1597-810.1007/s00289-015-1597-8 ↗
57. X. Zhou, J. Deng, C. Fang, W. Lei, Y. Song, Z. Zhang, Z. Huang, and Y. Li, Additive Manufacturing of CNTs/PLA Composites and the Correlation Between Microstructure and Functional Properties, J. Mater. Sci. Technol., 2021, 60, p 27–34. https://doi.org/10.1016/j.jmst.2020.04.03810.1016/j.jmst.2020.04.038 ↗
58. M. Kaseem, K. Hamad, F. Deri, and Y.G. Ko, A Review on Recent Researches on Polylactic Acid/Carbon Nanotube Composites, Polym. Bull., 2017, 74, p 2921–2937. https://doi.org/10.1007/s00289-016-1861-610.1007/s00289-016-1861-6 ↗
59. N. Najafi, M.C. Heuzey, and P.J. Carreau, Polylactide (PLA)-Clay Nanocomposites Prepared by Melt Compounding in the Presence of a Chain Extender, Compos. Sci. Technol., 2012, 72, p 608–615. https://doi.org/10.1016/j.compscitech.2012.01.00510.1016/j.compscitech.2012.01.005 ↗
60. J.W. Huang, Y.C. Hung, Y.L. Wen, C.C. Kang, and M.Y. Yeh, Polylactide/Nano- and Micro-scale Silica Composite Films. II. Melting Behavior and Cold Crystallization, J. Appl. Polym. Sci., 2009, 112, p 3149–3156. https://doi.org/10.1002/app.2969910.1002/app.29699 ↗
61. T. Ceregatti, P. Pecharki, W. Mauricio Pachekoski, D. Becker, W.M. Pachekoski, and C. Dalmolin, PLA/CNT composites as substrates for polyaniline deposition, 2016. https://www.researchgate.net/publication/311591825.
62. D. Rana, B.M. Mandal, and S.N. Bhattacharyya, Miscibility and Phase Diagrams of Poly(phenyl acrylate) and Poly(styrene-co-acrylonitrile) Blends, Polymer, 1993, 34(7), p 1454–1459. https://doi.org/10.1016/0032-3861(93)90861-410.1016/0032-3861(93)90861-4 ↗
63. D. Rana, B.M. Mandal, and S.N. Bhattacharyya, Analogue Calorimetric Studies of Blends of Poly(vinyl ester)s and Polyacrylates, Macromolecules, 1996, 29, p 1579–1583. https://doi.org/10.1021/ma950954n10.1021/ma950954n ↗
64. J.H. Lee, S.H. Park, S.H. Kim, and H. Ito, Replication and Surface Properties of Micro Injection Molded PLA/MWCNT Nanocomposites, Polym. Test, 2020 https://doi.org/10.1016/j.polymertesting.2019.10632110.1016/j.polymertesting.2019.106321 ↗
65. J. Duan, S. Shao, Y. Li, L. Wang, P. Jiang, and B. Liu, Polylactide/graphite Nanosheets/MWCNTs Nanocomposites with Enhanced Mechanical, Thermal and Electrical Properties, Iran. Polym. J. (English Ed.), 2012, 21, p 109–120. https://doi.org/10.1007/s13726-011-0008-810.1007/s13726-011-0008-8 ↗
66. G. Spinelli, R. Kotsilkova, E. Ivanov, V. Georgiev, C. Naddeo, and V. Romano, Thermal and Dielectric Properties of 3D Printed Parts Based on Polylactic Acid Filled with Carbon Nanostructures, Macromol. Symp., 2022 https://doi.org/10.1002/masy.20210024410.1002/masy.202100244 ↗
67. P.H.T. Vollenberg and D. Heikens, Particle Size Dependence of the Young’s Modulus of Filled Polymers: 1. Preliminary Experiments, Polymer, 1989, 30(9), p 1656–1662 https://doi.org/10.1016/0032-3861(89)90326-110.1016/0032-3861(89)90326-1 ↗
68. J.-P. Salvetat, J.-M. Bonard, N.H. Thomson, A.J. Kulik, L. Forró, W. Benoit, and L. Zuppiroli, Mechanical Properties of Carbon Nanotubes, Appl. Phys. A, 1999, 69, p 255–260. https://doi.org/10.1007/s00339990011410.1007/s003399900114 ↗
69. V. Hughes, I. Tabiai, K. Chizari, and D. Therriault, 3D Printable Conductive Nanocomposites of PLA and Multi-Walled Carbon Nanotubes, Mater. Matters-Aldrich Chem. Co, 2016, 11(2), p 61–63 https://doi.org/10.13140/RG.2.2.17004.1600710.13140/RG.2.2.17004.16007 ↗
70. S.H. Park, S.G. Lee, and S.H. Kim, Isothermal Crystallization Behavior and Mechanical Properties of Polylactide/Carbon Nanotube Nanocomposites, Compos. Part A Appl. Sci. Manuf., 2013, 46, p 11–18. https://doi.org/10.1016/j.compositesa.2012.10.01110.1016/j.compositesa.2012.10.011 ↗