Investigation of Compressive Mechanical Properties and Microstructure Evolution of 93W-4.9Ni-2.1Fe Heavy Alloy under a Wide Range of Strain Rates
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Y. Şahin, Recent progress in processing of tungsten heavy alloys, J. Powder Technol., 2014, 2014, p 1–22.10.1155/2014/764306 ↗
2. N. Senthilnathan, A. Raja Annamalai, and G. Venkatachalam, Sintering of tungsten, and tungsten heavy Alloys of W-Ni-Fe and W-Ni-Cu: a review, Trans. Indian Inst. Met., 2017, 70(5), p 1161–1176.10.1007/s12666-016-0936-2 ↗
3. B.G. Butler, J.D. Paramore, J.P. Ligda, C. Ren, Z.Z. Fang, S.C. Middlemas, and K.J. Hemker, Mechanisms of deformation and ductility in tungsten–A review, Int. J. Refract. Met. Hard Mater., 2018, 75, p 248–261.10.1016/j.ijrmhm.2018.04.021 ↗
4. R.M. German, Sintered tungsten heavy alloys: review of microstructure, strength, densification, and distortion, Int. J. Refract. Met. Hard Mater., 2022, 108, 105940.10.1016/j.ijrmhm.2022.105940 ↗
5. M. Hasanabadi, M. Azadi, and M. Yousefpour, Effects of Al2O3 micro/nanoparticles on the microstructure and corrosion behavior of W-Ni–Fe matrix through spark plasma sintering process, J Mater. Res. Technol., 2024, 31, p 747–759.10.1016/j.jmrt.2024.06.126 ↗
6. S. Meng, Q. Cai, Y. Ma, W. Liu, and W. Zhu, Interfacial structure and formation mechanism of 90 W-7Ni-3Fe/steel using co-sintering method, Int. J. Refract. Met. Hard Mater., 2024, 122, 106722.10.1016/j.ijrmhm.2024.106722 ↗
7. M.E. Alam, J.V. Haag, W. Setyawan, C.H. Henager, and G.R. Odette, On the effect of high-temperature annealing on the microstructure and mechanical properties of a hot-rolled 90W7Ni3Fe tungsten heavy alloy, Mater. Sci. Eng. A, 2024, 896, 146200.
8. B. Qian, G. Zhou, J. Li, D. Zhang, X. Zhang, Y. Zhu, J. Jing, S. Tan, and Y. Li, Study of the crater produced by hypervelocity tungsten alloy projectile into concrete Target, Beijing Ligong Daxue Xuebao, 2018, 38(10), p 1012.
9. F. Zhou, C. Du, C. Cheng, L. Xu, Z. Du, G. Gao, A. Liu, and H. Fu, Penetration performance and fragmentation mechanism behind target of tungsten fibre/zirconium-based bulk metallic glass matrix composite rod, Int. J. Refract. Met. Hard Mater., 2023, 112, 106160.
10. M. Zhou, and R.J. Clifton, Dynamic constitutive, and failure behavior of a two-phase tungsten composite, J. Appl. Mech., 1997, 64(3), p 487–494.10.1115/1.2788919 ↗
11. D.-K. Kim, S. Lee, and J.-W. Noh, Dynamic and quasi-static torsional behavior of tungsten heavy alloy specimens fabricated through sintering, heat-treatment, swaging and aging, Mater. Sci. Eng. A, 1998, 247(1), p 285–294.10.1016/S0921-5093(97)00547-9 ↗
12. Y. Zhou, Y. Wang, P.K. Mallick, and Y. Xia, Strain softening constitutive equation for tungsten heavy alloy under tensile impact, Mater. Lett., 2004, 58(22), p 2725–2729.10.1016/j.matlet.2004.03.048 ↗
13. J. Das, G. Appa Rao, and S.K. Pabi, Microstructure and mechanical properties of tungsten heavy alloys, Mater. Sci. Eng. A., 2010, 527(29), p 7841–7847.10.1016/j.msea.2010.08.071 ↗
14. W.-S. Lee, G.-L. Xiea, and C.-F. Lin, The strain rate and temperature dependence of the dynamic impact response of tungsten composite, Mater. Sci. Eng. A, 1998, 257(2), p 256–267.10.1016/S0921-5093(98)00852-1 ↗
15. K. Hu, X. Li, M. Guan, S. Qu, X. Yang, and J. Zhang, Dynamic deformation behavior of 93W–5.6Ni-1.4Fe heavy alloy prepared by spark plasma sintering, Int. J. Refract. Met. Hard Mater., 2016, 58, p 117–124.10.1016/j.ijrmhm.2016.04.010 ↗
16. Z. Xu, and F. Huang, Thermomechanical behavior and constitutive modeling of tungsten-based composite over wide temperature and strain rate ranges, Int. J. Plast., 2013, 40, p 163–184.10.1016/j.ijplas.2012.08.004 ↗
17. L. Zhang, X. Chen, Y. Huang, W. Liu, and Y. Ma, Microstructural characteristics and evolution mechanisms of 90W–Ni–Fe alloy under high-strain-rate deformation, Mater. Sci. Eng. A, 2021, 811, 141070.
18. Z. Wu, Y. Zhang, C. Yang, and Q. Liu, Mechanical properties of tungsten heavy alloy and damage behaviors after hypervelocity impact, Rare Met., 2014, 33(4), p 414–418.10.1007/s12598-014-0320-5 ↗
19. Z. Zhang, K. Miao, and F. Wang, Mechanical properties of 90 tungsten alloy at different temperatures, Beijing Ligong Daxue Xuebao, 2005, 12, p 1106.
20. C. Zheng, J. Fan, X. Gong, C. Yang, and T. Liu, Dynamic constitutive relationship of fine-grained 93W–4.9Ni-2.1Fe alloys, Xiyou Jinshu Cailiao Yu Gongcheng, 2013, 42, p 2043–2047.
21. M. Li, M. Zu, Y. Yu, and W. Zhang, Elevated temperature tensile behavior and microstructure evolution of liquid phase sintered 90W–7Ni–3Fe alloy, J. Alloys Compd., 2019, 802, p 528–534.10.1016/j.jallcom.2019.06.222 ↗
22. Y. Yu, C. Ren, and W. Zhang, Compressive behavior of liquid phase sintered 90 W-7Ni-3Fe heavy alloy at high temperature and low strain rate condition, Int. J. Refract. Met. Hard Mater., 2018, 76, p 149–157.10.1016/j.ijrmhm.2018.06.006 ↗
23. C. Du, Z. Du, K. Wang, W. Dai, G. Gao, Z. Zhu, L. Xu, and X. Chen, Effect of tungsten fiber diameter on the dynamic compression properties of tungsten fiber/Zr-based bulk metallic glasses matrix composite, Int. J. Impact Eng, 2022, 164, 104185.
24. E.D.H. Davies, and S.C. Hunter, The dynamic compression testing of solids by the method of the split Hopkinson pressure bar, J. Mech. Phys. Solids, 1963, 11(3), p 155–179.10.1016/0022-5096(63)90050-4 ↗
25. S. Zhang, Y.C. Wang, A.P. Zhilyaev, E. Korznikova, S. Li, G.I. Raab, and T.G. Langdon, Temperature and strain rate dependence of microstructural evolution and dynamic mechanical behavior in nanocrystalline Ti, Mater. Sci. Eng. A, 2015, 641, p 29–36.10.1016/j.msea.2015.06.035 ↗
26. Y. Liu, J. Meng, L. Zhu, H. Chen, Z. Li, S. Li, D. Wang, Y. Wang, and K. Kosiba, Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions, Addit. Manuf., 2022, 54, 102772.
27. D.S. Kim, S. Nemat-Nasser, J.B. Isaacs, and D. Lischer, Adiabatic shearband in WHA in high-strain-rate compression, Mech. Mater., 1998, 28(1), p 227–236.10.1016/S0167-6636(97)00068-9 ↗
28. W. Guo, J. Liu, S. Li, Y. Wang, and W. Ji, Microstructural evolution and deformation mechanism of the 80W–20Cu alloy at ultra-high strain rates under explosive loading, Mater. Sci. Eng. A, 2013, 572, p 36–44.10.1016/j.msea.2013.02.020 ↗
29. V.K.R. Sirigiri, V.Y. Gudiga, U.S. Gattu, G. Suneesh, and K.M. Buddaraju, A review on Johnson Cook material model, Mater. Today: Proc., 2022, 62, p 3450–3456.
30. J. Lemaitre, J.L. Chaboche, and A.K. Maji, Mechanics of solid materials, J. Eng. Mech., 1993, 119(3), p 642–643.10.1061/(ASCE)0733-9399(1993)119:3(642.2) ↗
31. T. Suo, Y. Chen, Y. Li, C. Wang, and X. Fan, Strain rate sensitivity and deformation kinetics of ECAPed aluminium over a wide range of strain rates, Mater. Sci. Eng. A, 2013, 560, p 545–551.10.1016/j.msea.2012.09.100 ↗
32. S.L. Yan, H. Yang, H.W. Li, and X. Yao, Variation of strain rate sensitivity of an aluminum alloy in a wide strain rate range: mechanism analysis and modeling, J. Alloys Compd., 2016, 688, p 776–786.10.1016/j.jallcom.2016.07.077 ↗
33. Y. Chen, S. Tekumalla, Y.B. Guo, R. Shabadi, V.P.W. Shim, and M. Gupta, The dynamic compressive response of a high-strength magnesium alloy and its nanocomposite, Mater. Sci. Eng. A, 2017, 702, p 65–72.10.1016/j.msea.2017.07.005 ↗
34. Y.C. Lin, X.-M. Chen, and G. Liu, A modified Johnson-Cook model for tensile behaviors of typical high-strength alloy steel, Mater. Sci. Eng. A, 2010, 527(26), p 6980–6986.10.1016/j.msea.2010.07.061 ↗
35. J. Wang, G. Zhao, L. Chen, and J. Li, A comparative study of several constitutive models for powder metallurgy tungsten at elevated temperature, Mater. Des., 2016, 90, p 91–100.10.1016/j.matdes.2015.10.114 ↗
36. Y. Cao, Y. Zhen, M. Song, H. Yi, F. Li, and X. Li, Determination of Johnson-Cook parameters and evaluation of Charpy impact test performance for X80 pipeline steel, Int. J. Mech. Sci., 2020, 179, 105627.
37. L. Ye, Y. Han, J. Fan, and Z. Du, Fabrication of ultrafine-grain and great-performance W-Ni–Fe alloy with medium W content, J. Alloys Compd., 2020, 846, 156237.
38. Y.B. Zhu, Y. Wang, X.Y. Zhang, and G.W. Qin, W/NiFe phase interfacial characteristics of liquid-phase sintered W-Ni–Fe alloy, Int. J. Refract. Met. Hard Mater., 2007, 25(4), p 275–279.10.1016/j.ijrmhm.2006.08.003 ↗
39. J. Das, U.R. Kiran, A. Chakraborty, and N.E. Prasad, Hardness and tensile properties of tungsten based heavy alloys prepared by liquid phase sintering technique, Int. J. Refract. Met. Hard Mater., 2009, 27(3), p 577–583.10.1016/j.ijrmhm.2008.08.003 ↗
40. M. Kumar, N.P. Gurao, and A. Upadhyaya, Evolution of microstructure and crystallographic texture during cold rolling of liquid phase sintered tungsten heavy alloy, Int. J. Refract. Met. Hard Mater., 2022, 105, 105849.10.1016/j.ijrmhm.2022.105849 ↗
41. J.V. Haag, J. Wang, D.J. Edwards, W. Setyawan, and M. Murayama, A boundary-based approach to the multiscale microstructural characterization of a W-Ni-Fe tungsten heavy alloy, Scr. Mater., 2022, 213, 114587.
42. Z.-B. Li, Y. Wang, H. Zhang, B. Chen, G.-H. Zhang, and K.-C. Chou, Effect of ZrB2 addition on microstructure evolution, and mechanical properties of 93 wt.% tungsten heavy alloys, Mater. Sci. Eng. A., 2021, 825, p 141870.10.1016/j.msea.2021.141870 ↗
43. X.R. Guan, Q. Chen, S.J. Qu, G.J. Cao, H. Wang, A.H. Feng, and D.L. Chen, Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning, and grain refinement, J. Mater. Sci. Technol., 2023, 150, p 104–113.10.1016/j.jmst.2022.11.047 ↗
44. J.L. Fan, X. Gong, B.Y. Huang, M. Song, T. Liu, M.G. Qi, J.M. Tian, and S.K. Li, Dynamic failure and adiabatic shearbands in fine-grain 93W-4.9Ni-2.1Fe alloy with Y2O3 addition under lower high-strain-rate (HSR) compression, Mech. Mater., 2010, 42(1), p 24–30.10.1016/j.mechmat.2009.08.006 ↗
45. D. Rittel, L.H. Zhang, and S. Osovski, The dependence of the Taylor-Quinney coefficient on the dynamic loading mode, J. Mech. Phys. Solids, 2017, 107, p 96–114.10.1016/j.jmps.2017.06.016 ↗
46. I. Rohr, H. Nahme, K. Thoma, and C.E. Anderson Jr., Material characterisation and constitutive modelling of a tungsten-sintered alloy for a wide range of strain rates, Int. J. Impact Eng, 2008, 35(8), p 811–819.10.1016/j.ijimpeng.2007.12.006 ↗