Thermal Stability of Laser-Clad Tool Steel with Fine Tungsten Carbide Particle Addition
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. C. Lee, Effect of Strain Rate on Fatigue Property of A356 Aluminium Casting Alloys Containing Pre-Existing Micro-Voids, Int. J. Fatigue, 2020, 131, p 105368.10.1016/j.ijfatigue.2019.105368 ↗
2. Y. Lei et al., Microstructure and Phase Transformations in Laser Clad CrxSy/Ni Coating on H13 Steel, Opt. Lasers Eng., 2015, 66, p 181–186.10.1016/j.optlaseng.2014.09.006 ↗
3. G. Telasang et al., Effect of Laser Parameters on Microstructure and Hardness of Laser Clad and Tempered AISI H13 Tool Steel, Surf. Coat. Technol., 2014, 258, p 1108–1118.10.1016/j.surfcoat.2014.07.023 ↗
4. M.A. Tolcha, H. Altenbach, and G.S. Tibba, Modeling Creep-Fatigue Interaction Damage and H13 tool Steel Material Response for Rolling Die Under Hot Milling, Eng. Fract. Mech., 2020, 223, p 106770.10.1016/j.engfracmech.2019.106770 ↗
5. E.J. Vinarcik, High Integrity Die Casting Processes, Wiley, 2002, p 256
6. S.-H. Kang et al., Failure Analysis of Die Casting Pins for an Aluminum Engine Block, Eng. Fail. Anal., 2019, 104, p 690–703.10.1016/j.engfailanal.2019.06.053 ↗
7. R. Markežič et al., Experimental and Numerical Analysis of Failures on a Die Insert for High Pressure Die Casting, Eng. Fail. Anal., 2019, 95, p 171–180.10.1016/j.engfailanal.2018.09.010 ↗
8. S. Chander and V. Chawla, Failure of Hot Forging Dies –An Updated Perspective, Mater. Today Proc., 2017, 4, p 1147–1157.10.1016/j.matpr.2017.01.131 ↗
9. D. Galicki et al., On the Formation of Spherical Metastable BCC Single Crystal Spatter Particles During Laser Powder Bed Fusion, Materialia, 2020, 9, p 100584.10.1016/j.mtla.2020.100584 ↗
10. G.B. Stachowiak and G.W. Stachowiak, Tribological Characteristics of WC-Based Claddings Using a Ball-Cratering Method, Int. J. Refract Metal Hard Mater., 2010, 28(1), p 95–105.10.1016/j.ijrmhm.2009.07.015 ↗
11. L. Lu, T. Huang, and M. Zhong, WC Nano-Particle Surface Injection Via Laser Shock Peening onto 5A06 Aluminum Alloy, Surf. Coat. Technol., 2012, 206(22), p 4525–4530.10.1016/j.surfcoat.2012.03.004 ↗
12. Schneider, M.F., Laser Cladding with Powder: Effect of Some Machining Parameters on Clad Properties. 1998.
13. G. Liu et al., The Effects of Grain Size, Dendritic Structure and Crystallographic Orientation on Fatigue Crack Propagation in IN713C Nickel-Based Superalloy, Int. J. Plast., 2020, 125, p 150–168.10.1016/j.ijplas.2019.09.010 ↗
14. M.F. Horstemeyer et al., High Cycle Fatigue of a Die Cast AZ91E-T4 Magnesium Alloy, Acta Mater., 2004, 52(5), p 1327–1336.10.1016/j.actamat.2003.11.018 ↗
15. J. Miao, T.M. Pollock, and J.W. Jones, Crystallographic Fatigue Crack Initiation in Nickel-Based Superalloy René 88DT at Elevated Temperature, Acta Mater., 2009, 57(20), p 5964–5974.10.1016/j.actamat.2009.08.022 ↗
16. J.C. Stinville et al., Fatigue Deformation in a Polycrystalline Nickel Base Superalloy at Intermediate and High Temperature: Competing Failure Modes, Acta Mater., 2018, 152, p 16–33.10.1016/j.actamat.2018.03.035 ↗
17. K. Gall et al., The Influence of Modified Intermetallics and Si Particles on Fatigue Crack Paths in a Cast A356 Al Alloy, Fatigue Fract. Eng. Mater. Struct., 2000, 23, p 159–172.10.1046/j.1460-2695.2000.00239.x ↗
18. A. Pineau et al., Failure of Metals II: Fatigue, Acta Mater., 2016, 107, p 484–507.10.1016/j.actamat.2015.05.050 ↗
19. J. Jiang et al., Microstructurally Sensitive Crack Nucleation Around Inclusions in Powder Metallurgy Nickel-Based Superalloys, Acta Mater., 2016, 117, p 333–344.10.1016/j.actamat.2016.07.023 ↗
20. B.S. Yilbas et al., Laser Treatment of Dual Matrix Cast Iron with Presence of WC Particles at the Surface: Influence of Self-Annealing on Stress Fields, Opt. Laser Technol., 2016, 76, p 6–18.10.1016/j.optlastec.2015.07.003 ↗
21. Y. Peng et al., Effect of WC Content on Microstructures and Mechanical Properties of FeCoCrNi High-Entropy Alloy/WC Composite Coatings by Plasma Cladding, Surf. Coat. Technol., 2020, 385, p 125326.10.1016/j.surfcoat.2019.125326 ↗
22. A.M. Venter et al., Interdependence of Slurry Erosion Wear Performance and Residual Stress in WC-12wt%Co and WC-10wt%VC-12wt%Co HVOF Coatings, Int. J. Refract Metal Hard Mater., 2020, 87, p 105101.10.1016/j.ijrmhm.2019.105101 ↗
23. C. Lee et al., Residual Stress and Crack Initiation in Laser Clad Composite Layer with Co-Based Alloy and WC + NiCr, Appl. Surf. Sci., 2015, 345, p 286–294.10.1016/j.apsusc.2015.03.168 ↗
24. A. Tomala et al., Tribological Performance of Some Solid Lubricants for Hot Forming Through Laboratory Simulative Tests, Tribol. Int., 2014, 74, p 164–173.10.1016/j.triboint.2014.02.008 ↗
25. S. Reisinger et al., Differentiation of Grain Orientation with Corrosive and Colour Etching on a Granular Bainitic steel, Micron, 2017, 99, p 67–73.10.1016/j.micron.2017.04.002 ↗
26. M.H. Sk et al., Contrast Inversion of Ferrite and Pearlite in a Sweet Corrosion Environment, Appl. Surf. Sci., 2023, 635, p 157744.10.1016/j.apsusc.2023.157744 ↗
27. Z.W. Chen and M.Z. Jahedi, Die erosion and Its Effect on Soldering Formation in High Pressure Die Casting of Aluminium Alloys, Mater. Des., 1999, 20(6), p 303–309.10.1016/S0261-3069(99)00035-7 ↗
28. E.K. Tentardini et al., Soldering Mechanisms in Materials and Coatings for Aluminum Die Casting, Surf. Coat. Technol., 2008, 202(16), p 3764–3771.10.1016/j.surfcoat.2008.01.019 ↗
29. V. Nunes et al., Increasing the Lifespan of High-Pressure Die Cast Molds Subjected to Severe Wear, Surf. Coat. Technol., 2017, 332, p 319–331.10.1016/j.surfcoat.2017.05.098 ↗
30. B.-C. Du et al., Analysis of Thermal Stress and Fatigue Fracture for The Solar Tower Molten Salt receiVer, Appl. Therm. Eng., 2016, 99, p 741–750.10.1016/j.applthermaleng.2016.01.101 ↗
31. D. Bartkowski et al., Microstructure, Microhardness and Corrosion Resistance of Stellite-6 Coatings Reinforced with WC Particles Using Laser Cladding, Opt. Laser Technol., 2015, 68, p 191–201.10.1016/j.optlastec.2014.12.005 ↗
32. P. Farahmand et al., Laser Cladding Assisted by Induction Heating of Ni–WC Composite Enhanced by Nano-WC and La2O3, Ceram. Int., 2014, 40, p 15421–15438.10.1016/j.ceramint.2014.06.097 ↗
33. Z. Zhang and R. Kovacevic, Laser Cladding of Iron-Based Erosion Resistant Metal Matrix Composites, J. Manuf. Process., 2019, 38, p 63–75.10.1016/j.jmapro.2019.01.001 ↗
34. S. Huth, N. Krasokha, and W. Theisen, Development of Wear and Corrosion Resistant Cold-Work Tool Steels Produced by Diffusion Alloying, Wear, 2009, 267(1–4), p 449–457.10.1016/j.wear.2008.12.089 ↗
35. G. Wang et al., High Temperature Wear Resistance and Thermal Fatigue Behavior of Stellite-6/WC Coatings Produced by Laser Cladding with Co-Coated WC Powder, Int. J. Refract Metal Hard Mater., 2019, 81, p 63–70.10.1016/j.ijrmhm.2019.02.024 ↗
36. R. Ahmadi-Pidani et al., Improving the Thermal Shock Resistance of Plasma Sprayed CYSZ Thermal Barrier Coatings by Laser Surface Modification, Opt. Lasers Eng., 2012, 50(5), p 780–786.10.1016/j.optlaseng.2011.12.007 ↗
37. C. Mitterer et al., Application of Hard Coatings in Aluminium Die Casting—Soldering, Erosion and Thermal Fatigue Behaviour, Surf. Coat. Technol., 2000, 125(1), p 233–239.10.1016/S0257-8972(99)00557-5 ↗
38. B. Liu et al., Thermal Fatigue Evaluation of AISI H13 Steels Surface Modified by Gas Nitriding with Pre- and Post-shot Peening, Appl. Surf. Sci., 2019, 483, p 45–51.10.1016/j.apsusc.2019.03.291 ↗
39. M. He et al., A Novel Crack Healing Technique in a Low Carbon Steel by Cyclic Phase Transformation Heat Treatment: The Process and Mechanism, Mater. Sci. Eng. A, 2020, 772, p 138712.10.1016/j.msea.2019.138712 ↗
40. J.Z. Lu et al., Wear Properties and Microstructural Analyses of Fe-Based Coatings with Various WC Contents on H13 Die Steel by Laser Cladding, Surf. Coat. Technol., 2019, 369, p 228–237.10.1016/j.surfcoat.2019.04.063 ↗
41. S. Allain et al., Internal Stresses and Carbon Enrichment in Austenite of Quenching & Partitioning steels from High Energy X-Ray Diffraction Experiments, Mater. Sci. Eng. A, 2017, 710, p 245–250.10.1016/j.msea.2017.10.105 ↗
42. Y. Xu et al., Residual Stress Evaluation in Welded Large Thin-Walled Structures Based on Eigenstrain Analysis and Small Sample Residual Stress Measurement, Thin Wall. Struct., 2018, 131, p 782–791.10.1016/j.tws.2018.07.049 ↗
43. L. Messina et al., Solute Diffusion by Self-Interstitial Defects and Radiation-Induced Segregation in Ferritic Fe-X (X=Cr, Cu, Mn, Ni, P, Si) Dilute Alloys, Acta Mater., 2020, 191, p 166.10.1016/j.actamat.2020.03.038 ↗
44. J. Sun et al., Anti-Thermal-Fatigue Property of 8407 Steel With Surface Aluminization and Oxidation Treatment, J. Iron. Steel Res. Int., 2013, 20(1), p 53–57.10.1016/S1006-706X(13)60044-8 ↗
45. A. Saha et al., Microstructural Modifications and Changes in Mechanical Properties During Cyclic Heat Treatment of 0.16% Carbon Steel, Mater. Sci. Eng. A, 2012, 534, p 465–475.10.1016/j.msea.2011.11.095 ↗
46. D. Mellouli et al., Hardness Effect on Thermal Fatigue Damage of Hot-Working Tool Steel, Eng. Fail. Anal., 2014, 45, p 85–95.10.1016/j.engfailanal.2014.06.007 ↗
47. Z. Wang et al., High Hardness and Fatigue Resistance of CoCrFeMnNi High Entropy Alloy Films with Ultrahigh-Density Nanotwins, Int. J. Plast., 2020, 131, p 102726.10.1016/j.ijplas.2020.102726 ↗
48. J. Gao et al., Numerical Simulation and Experimental Investigation on Three-Dimensional Modelling of Single-Track Geometry and Temperature Evolution by Laser Cladding, Opt. Laser Technol., 2020, 129, p 106287.10.1016/j.optlastec.2020.106287 ↗
49. N. Tamanna, R. Crouch, and S. Naher, Progress in Numerical Simulation of the Laser Cladding Process, Opt. Lasers Eng., 2019, 122, p 151–163.10.1016/j.optlaseng.2019.05.026 ↗
50. T. Okawa, A Three-Dimensional Approach for Simulating BWR Core Melt Progression–A Validation Against CORA-BWR Experimental Series, Ann. Nucl. Energy, 2019, 132, p 512–525.10.1016/j.anucene.2019.06.041 ↗
51. Y.-C. Lin and Y.-Y. Liu, Effects of Co and W on the Microstructure and Wear Behavior of NiCrAlMoTiFeNbX Equimolar Multicomponent-Clad Layers, Wear, 2020, 446–447, p 203186.10.1016/j.wear.2020.203186 ↗
52. A. Grüning, M. Lebsanft, and B. Scholtes, Cyclic Stress-Strain Behavior and Damage of Tool Steel AISI H11 Under Isothermal and Thermal Fatigue Conditions, Mater. Sci. Eng. A, 2010, 527(7), p 1979–1985.10.1016/j.msea.2009.11.031 ↗
53. H.M.R. de Oliveira et al., Specific forward/Reverse Latent Heat and Martensite Fraction Measurement During Superelastic Deformation of Nanostructured NiTi Wires, Mater. Sci. Eng. A, 2020, 774, p 138928.10.1016/j.msea.2020.138928 ↗
54. A. Singh and E.B. Tadmor, Simulating the Superheating of Nanomaterials due to Latent Heat Release in Surface Reconstruction, Int. J. Heat Mass Transf., 2017, 107, p 792–804.10.1016/j.ijheatmasstransfer.2016.11.070 ↗
55. K.M. Armattoe et al., Modeling of Latent Heat Effects on Phase Transformation in Shape Memory Alloy Thin Structures, Int. J. Solids Struct., 2016, 88–89, p 283–295.10.1016/j.ijsolstr.2016.02.024 ↗
56. Y. Lin et al., Stress-Induced Grain Growth During High-Temperature Deformation of Nanostructured Al Containing Nanoscale Oxide Particles, J. Alloy. Compd., 2014, 596, p 79–85.10.1016/j.jallcom.2014.01.189 ↗
57. B. Ratzker et al., Stress-Enhanced Dynamic Grain Growth During High-Pressure Spark Plasma Sintering of Alumina, Acta Mater., 2019, 164, p 390–399.10.1016/j.actamat.2018.11.001 ↗
58. Y. Lin et al., Stress-Induced Grain Growth in an Ultra-Fine Grained Al Alloy, Metall. Mater. Trans. A, 2014, 45(6), p 2673–2688.10.1007/s11661-014-2258-5 ↗