Effect of CeO2 on the Microstructure and Properties of In Situ Nano-VC Reinforced Sub-micron Fe-Based Laser Cladding Layers
Source abstract
Abstract
The preferential corrosion susceptibility along grain boundaries significantly increased as the grain size of the Fe-based matrix in the cladding layers reached the submicron scale. The addition of an appropriate amount of CeO2 was introduced to investigate its effect on the microstructure and properties of in situ nano vanadium carbides reinforced submicron Fe-based laser-cladded layers. The results indicated that a moderate amount of CeO2 promoted the refinement of the matrix and in situ carbides and contributed to the uniform distribution of microstructures, but an excessive amount of CeO2 led to carbide accumulation. With increasing addition of CeO2, the hardness and corrosion resistance of the cladding layers showed an overall trend of increasing and then decreasing. The optimal overall performance of the cladding layer was attained with an addition of 1.5 wt.%. Compared with the layer without CeO2, the corrosion resistance was improved by approximately 4.9-fold and the hardness by 114 HV0.2.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. K.D. Yu, W. Zhao, Z. Li, N. Guo, G.C. Xiao, and H. Zhang, High-Temperature Oxidation Behavior and Corrosion Resistance of In-Situ TiC and Mo Reinforced AlCoCrFeNi-Based High Entropy Alloy Coatings by Laser Cladding, Ceram. Int., 2023, 49(6), p 10151–10164. https://doi.org/10.1016/j.ceramint.2022.11.19810.1016/j.ceramint.2022.11.198 ↗
2. K.N. Jin, Z.Y. Yang, P. Chen, G.S. Huang, and X.X. Qiao, Dynamic Solidification Process During Laser Cladding of IN718: Multi-Physics Model, Solute Suppressed Nucleation and Microstructure Evolution, Int. J. Heat Mass Transfer, 2022, 192, p 122907. https://doi.org/10.1016/j.ijheatmasstransfer.2022.12290710.1016/j.ijheatmasstransfer.2022.122907 ↗
3. Z.L. Peng, J. Zhang, M.J. Zhang, K.M. Wang, and P. Peng, Laser In-Situ Preparation and Mechanical Properties of VC Reinforced Fe-Based Wear-Resistant Composite Cladding, Ceram. Int., 2022, 48(19), p 28240–28249. https://doi.org/10.1016/j.ceramint.2022.06.12910.1016/j.ceramint.2022.06.129 ↗
4. J.F. Li, Z.C. Zhu, Y.X. Peng, and G. Shen, Phase Evolution and Wear Resistance of In-Situ Synthesized (Cr, W) 23C6-WC Composite Ceramics Reinforced Fe-Based Composite Coatings Produced by Laser Cladding, Vacuum, 2021, 190, p 110242. https://doi.org/10.1016/j.vacuum.2021.11024210.1016/j.vacuum.2021.110242 ↗
5. L.Y. Chen, T.B. Yu, C. Guan, and Y. Zhao, Microstructure and Properties of Metal Parts Remanufactured by Laser Cladding TiC and TiB2 Reinforced Fe-Based Coatings, Ceram. Int., 2022, 48(10), p 14127–14140. https://doi.org/10.1016/j.ceramint.2022.01.29910.1016/j.ceramint.2022.01.299 ↗
6. H. Zhang, Y.P. Liu, X. Bai, W. Zhao, P.R. Zhang, and W.F. Rao, Laser Cladding Highly Corrosion-Resistant Nano/Submicron Ultrafine-Grained Fe-Based Composite Layers, Surf. Coat. Technol., 2021, 424, p 127636. https://doi.org/10.1016/j.surfcoat.2021.12763610.1016/j.surfcoat.2021.127636 ↗
7. C.S. Lei, X.L. Li, X.T. Deng, Z.D. Wang, and G.D. Wang, Deformation Mechanism and Ductile Fracture Behavior in High Strength High Ductility Nano/Ultrafine Grained Fe-17Cr-6Ni Austenitic Steel, Mater. Sci. Eng. A, 2018, 709, p 72–81. https://doi.org/10.1016/j.msea.2017.10.04310.1016/j.msea.2017.10.043 ↗
8. M. Moallemi, A. Zarei-Hanzaki, S.J. Kim, and H. Alimadadi, On the Microstructural-Textural Characterization and Deformation Analysis of a Nano/Ultrafine Grained Fe-20Cr-8Mn-0.3N Duplex Alloy with Superior Mechanical Properties, Mater. Charact., 2019, 156, p 109878. https://doi.org/10.1016/j.matchar.2019.10987810.1016/j.matchar.2019.109878 ↗
9. C.P. Scott, F. Fazeli, B.S. Amirkhiz, I. Pushkareva, and S.Y.P. Allain, Structure-Properties Relationship of Ultra-Fine Grained V-microalloyed Dual Phase Steels, Mater. Sci. Eng. A, 2017, 703, p 293–303. https://doi.org/10.1016/j.msea.2017.07.05110.1016/j.msea.2017.07.051 ↗
10. S.G. Hashemi and B. Eghbali, Evolution of High Strength and Ductile Ultrafine Grained Dual Phase Superferrite Low Carbon V-Nb-Mo Steel, Mater. Sci. Eng. A, 2017, 705, p 32–41. https://doi.org/10.1016/j.msea.2017.07.09410.1016/j.msea.2017.07.094 ↗
11. M. Esfahani, K.S. Munir, C. Wen, J. Zhang, Y. Durandet, J. Wang, and Y.C. Wong, Mechanical Properties of Electrodeposited Nanocrystalline and Ultrafine-Grained Zn-Sn Coatings, Surf. Coat. Technol., 2018, 333, p 71–80. https://doi.org/10.1016/j.surfcoat.2017.10.05910.1016/j.surfcoat.2017.10.059 ↗
12. B.N. Mordyuk, O.P. Karasevskaya, G.I. Prokopenko, and N.I. Khripta, Ultrafine-Grained Textured Surface Layer on Zr–1%Nb Alloy Produced by Ultrasonic Impact Peening for Enhanced Corrosion Resistance, Surf. Coat. Technol., 2012, 210, p 54–61. https://doi.org/10.1016/j.surfcoat.2012.08.06310.1016/j.surfcoat.2012.08.063 ↗
13. F. Ye, W. Shao, X. Ye, M. Liu, Y. Xie, P. Bian, X. Wang, L. Liu, and H. Wu, Microstructure and Corrosion Behavior of Laser-Cladding CeO2-Doped Ni-Based Composite Coatings on TC4, Chin. J. Chem., 2020, 22, p 10. https://doi.org/10.1155/2020/869042810.1155/2020/8690428 ↗
14. H. Zhang, Y.J. Pan, Y. Zhang, G.F. Lian, Q. Cao, and L.Z. Que, Microstructure, Toughness, and Tribological Properties of Laser Cladded Mo2FeB2-Based Composite Coating with In Situ Synthesized WC and La2O3 Addition, Surf. Coat. Technol., 2022, 449, p 128947. https://doi.org/10.1016/j.surfcoat.2022.12894710.1016/j.surfcoat.2022.128947 ↗
15. L.S. Zhang, M. Zhang, Z.Y. Zhu, M.R. Gao, J. Gao, and Z. Guo, Effects of Nano-CeO2 on Microstructure and Properties of Ni625 Alloy Prepared by Laser Cladding, J. Alloys Compd., 2022, 918, p 165571. https://doi.org/10.1016/j.jallcom.2022.16557110.1016/j.jallcom.2022.165571 ↗
16. Y. Wang, P.J. Li, N. Ma, B.Y. Zhang, Y.K. Wei, L.L. Zhang, J.R. Wang, and S.F. Liu, Effect of Y2O3 on the Microstructure and Tribology Property of WMoTaNb Refractory High Entropy Alloy Coating Prepared by Laser Cladding, Int. J. Refract. Hard Met., 2023, 115, p 106273. https://doi.org/10.1016/j.ijrmhm.2023.10627310.1016/j.ijrmhm.2023.106273 ↗
17. Q. Wang, J. Yang, W.J. Niu, Y.Y. Li, X. Mao, Y.G. Wang, and K. Zhang, Effect of La2O3 on Microstructure and Properties of Fe-Based Alloy Coatings by Laser Cladding, Optik., 2021, 245, p 167653. https://doi.org/10.1016/j.ijleo.2021.16765310.1016/j.ijleo.2021.167653 ↗
18. Y.M. Shi, J.B. Li, J. Zhang, B.Q. Wen, L.Q. Li, X.F. Wang, and S.X. Ren, Effect of La2O3 Addition on Wear Properties of Ni60a/SiC Coating Using Laser-Cladding, Opt. Laser Technol., 2022, 148, p 107640. https://doi.org/10.1016/j.optlastec.2021.10764010.1016/j.optlastec.2021.107640 ↗
19. J. Li, X. Luo, and G.J. Li, Effect of Y2O3 on the Sliding Wear Resistance of TiB/TiC-Reinforced Composite Coatings Fabricated by Laser Cladding, Wear, 2014, 310(1), p 72–82. https://doi.org/10.1016/j.wear.2013.12.01910.1016/j.wear.2013.12.019 ↗
20. Z.Z. Xu, Z.Y. Wang, J. Chen, Y.X. Qiao, J.W. Zhang, and Y.M. Huang, Effect of Rare Earth Oxides on Microstructure and Corrosion Behavior of Laser-Cladding Coating on 316L Stainless Steel, Coatings, 2019, 9, p 636. https://doi.org/10.3390/coatings910063610.3390/coatings9100636 ↗
21. H.J. Wang, T. Chen, W.L. Cong, and D.F. Liu, Laser Cladding of Ti-Based Ceramic Coatings on Ti6Al4V Alloy: Effects of CeO2Nanoparticles Additive on Wear Performance, Coatings, 2019, 9, p 109. https://doi.org/10.3390/coatings902010910.3390/coatings9020109 ↗
22. C. Cui, M.P. Wu, X.J. Miao, Z.S. Zhao, and Y.L. Gong, Microstructure and Corrosion Behavior of CeO2/FeCoNiCrMo High-Entropy Alloy Coating Prepared by Laser Cladding, J. Alloys Compd., 2022, 890, p 161826. https://doi.org/10.1016/j.jallcom.2021.16182610.1016/j.jallcom.2021.161826 ↗
23. D. Shu, S.C. Dai, G. Wang, W.D. Si, P. Xiao, X.X. Cui, and X. Chen, Influence of CeO2Content on WC Morphology and Mechanical Properties of WC/Ni Matrix Composites Coating Prepared by Laser In-Situ Synthesis Method, J. Mater. Res. Technol., 2020, 9(5), p 11111–11120. https://doi.org/10.1016/j.jmrt.2020.07.10410.1016/j.jmrt.2020.07.104 ↗
24. L.X. Wang, L.J. Yang, Y.M. Huang, Y.X. Yuan, and C.P. Jia, Effects of Y2O3 Addition on the Microstructure and Wear-Resistant Performance of TiN/TiB-Reinforced Ti-Based Laser-Clad Coatings on Ti-6Al-4V Alloys, Mater. Today Commun., 2021, 29, p 102752. https://doi.org/10.1016/j.mtcomm.2021.10275210.1016/j.mtcomm.2021.102752 ↗
25. J.G. Chen, Q.S. Li, B. Sun, Q.H. Zhao, Z.J. Wang, W.F. Niu, X. Wang, L.H. Dang, and Q.J. Ma, Effects of CeO2 on Microstructural Evolution, Corrosion and Tribology Behavior of Laser Cladded TiC Reinforced Co-Based Coatings, Int. J. Electrochem. Sci., 2021, 16(5), p 210511. https://doi.org/10.20964/2021.05.1010.20964/2021.05.10 ↗
26. M.N. Liu, D.X. Chen, Y.A. Wang, Y.W. Zhou, J.W. Zhang, and X. Wang, Effects of Yttrium on the Oxidation Behavior of 304 Stainless Steel with Coating by Laser Remelting in High Temperature Water, Mater. Res. Express, 2020, 7(1), p 016421. https://doi.org/10.1088/2053-1591/ab680310.1088/2053-1591/ab6803 ↗
27. Z.T. Gao, H.B. Ren, Y. Yuan, Z.M. Gao, E.Y. Liu, and C.W. Zhang, Effect of CeO2 on the Microstructure and Microhardness of Laser-Cladded Ni60 on 35CrMoV Alloys, Micron, 2021, 150, p 103146. https://doi.org/10.1016/j.micron.2021.10314610.1016/j.micron.2021.103146 ↗
28. C.L. Wang, Y. Gao, R. Wang, D.Q. Wei, M. Cai, and Y.K. Fu, Microstructure of Laser-Clad Ni60 Cladding Layers Added with Different Amounts of Rare-Earth Oxides on 6063 Al Alloys, J. Alloys Compd., 2018, 740, p 1099–1107. https://doi.org/10.1016/j.jallcom.2018.01.06110.1016/j.jallcom.2018.01.061 ↗
29. A.M. Murmu, S.K. Parida, A.K. Das, and S. Kumar, Evaluation of Laser Cladding of Ti6Al4V-ZrO2-CeO2Composite Coating on Ti6Al4V Alloy Substrate, Surf. Coat. Technol., 2023, 473, p 129988. https://doi.org/10.1016/j.surfcoat.2023.12998810.1016/j.surfcoat.2023.129988 ↗
30. R. Savinov, Y.C. Wang, and J. Shi, Microstructure and Properties of CeO2-Doped Co Cr Fe Mn Ni High Entropy Alloy Fabricated by Laser Metal Deposition, J. Manuf. Process, 2020, 56, p 1245–1251. https://doi.org/10.1016/j.jmapro.2020.04.01810.1016/j.jmapro.2020.04.018 ↗
31. Y.N. Liu, R.L. Sun, W. Niu, T.G. Zhang, and Y.W. Lei, Effects of CeO2 on Microstructure and Properties of TiC/Ti2Ni Reinforced Ti-Based Laser Cladding Composite Coatings, Opt. Lasers Eng., 2019, 120, p 84–94. https://doi.org/10.1016/j.optlaseng.2019.03.00110.1016/j.optlaseng.2019.03.001 ↗
32. F. Zhao, T.M. Guo, Y.W. Zhang, X.H. Wei, R.H. Zhang, X.L. Nan, K. Dong, and D.R. Hu, Effect of CeO2 on Microstructure and Properties of Wear and Corrosion Resistance Martensitic Stainless Steel-Based Coating on Laser Cladding, Steel Res. Int., 2022, 94, p 2200398. https://doi.org/10.1002/srin.20220039810.1002/srin.202200398 ↗
33. K.L. Wang, Q.B. Zhang, M.L. Sun, X.G. Wei, and Y.M. Zhu, Microstructure and Corrosion Resistance of Laser Clad Coatings with Rare Earth Elements, Corros. Sci., 2001, 43(2), p 255–267. https://doi.org/10.1016/S0010-938X(00)00081-010.1016/S0010-938X(00)00081-0 ↗
34. H. Zhang, Y. Zou, Z.D. Zou, and C.W. Shi, Effects of CeO2 on Microstructure and Corrosion Resistance of TiC-VC Reinforced Fe-Based Laser Cladding Layers, J. Rare Earths, 2014, 32(11), p 1095–1100. https://doi.org/10.1016/S1002-0721(14)60188-510.1016/S1002-0721(14)60188-5 ↗
35. H.Z. Moghaddam, M. Sharifitabar, and G. Roudini, Microstructure and Wear Properties of Fe–TiC Composite Coatings Produced by Submerged Arc Cladding Process Using Ferroalloy Powder Mixtures, Surf. Coat. Technol., 2019, 361, p 91–101. https://doi.org/10.1016/j.surfcoat.2019.01.05310.1016/j.surfcoat.2019.01.053 ↗
36. Y. Gao, Y. Liu, L. Wang, X.J. Yang, T. Zeng, L.G. Sun, and R.Q. Wang, Microstructure Evolution and Wear Resistance of Laser Cladded 316L Stainless Steel Reinforced with In-Situ VC-Cr7C3, Surf. Coat. Technol., 2022, 435, p 128264. https://doi.org/10.1016/j.surfcoat.2022.12826410.1016/j.surfcoat.2022.128264 ↗
37. C.J. Liang, C.L. Wang, K.X. Zhang, M.L. Liang, Y.G. Xie, W.J. Liu, J.J. Yang, and S.F. Zhou, Nucleation and Strengthening Mechanism of Laser Cladding Aluminum Alloy by Ni-Cr-B-Si Alloy Powder Based on Rare Earth Control, J. Mater. Process. Technol., 2021, 294, p 117145. https://doi.org/10.1016/j.jmatprotec.2021.11714510.1016/j.jmatprotec.2021.117145 ↗
38. Y.G. Wang and C.J. Liu, Agglomeration Characteristics of Various Inclusions in Al-killed Molten Steel Containing Rare Earth Element, Metall. Mater. Trans. B, 2020, 51, p 2585–2595. https://doi.org/10.1007/s11663-020-01938-110.1007/s11663-020-01938-1 ↗
39. R.D. Zhu, Z.Y. Li, X.X. Li, and Q. Sun, Microstructure and Properties of the Low-power-laser Clad Coatings on Magnesium Alloy with Different Amount of Rare Earth Addition, Appl. Surf. Sci., 2015, 353, p 405–413. https://doi.org/10.1016/j.apsusc.2015.06.07110.1016/j.apsusc.2015.06.071 ↗
40. Y.C. Cai, Z. Luo, and Y. Chen, Effect of CeO2 on TiC Morphology in Ni-Based Composite Coating, High Temp. Mater. Processes, 2018, 37(3), p 209–217. https://doi.org/10.1515/htmp-2016-019810.1515/htmp-2016-0198 ↗
41. L.Q. Yang, Z.Y. Li, Y.Q. Zhang, S.Z. Wei, Y.J. Wang, and Y. Kang, In-Situ TiC-Al3Ti Reinforced Al-Mg Composites with Y2O3Addition Formed by Laser Cladding on AZ91D, Surf. Coat. Technol., 2020, 383, p 125249. https://doi.org/10.1016/j.surfcoat.2019.12524910.1016/j.surfcoat.2019.125249 ↗
42. M.M. Hasan, P.P. Dholabhai, S. Dey, B.P. Uberuaga, and R.H.R. Castro, Reduced Grain Boundary Energies in Rare-earth Doped MgAl2O4Spinel and Consequent Grain Growth Inhibition, J. Eur. Ceram. Soc., 2017, 37(13), p 4043–4050. https://doi.org/10.1016/j.jeurceramsoc.2017.04.07310.1016/j.jeurceramsoc.2017.04.073 ↗
43. S. Sun, H. Fu, X. Ping, X. Guo, J. Lin, Y. Lei, W. Wu, and J. Zhou, Effect of CeO2Addition on Microstructure and Mechanical Properties of In-situ (Ti, Nb)C/Ni Coating, Surf. Coat. Technol., 2019, 359, p 300–313. https://doi.org/10.1016/j.surfcoat.2018.12.08310.1016/j.surfcoat.2018.12.083 ↗
44. Y.H. Zhao, J. Sun, and J.F. Li, Effect of Rare Earth Oxide on the Properties of Laser Cladding Layer and Machining Vibration Suppressing in side Milling, Appl. Surf. Sci., 2014, 321, p 387–395. https://doi.org/10.1016/j.apsusc.2014.09.19510.1016/j.apsusc.2014.09.195 ↗
45. S. Arthanari, Y.H. Li, L. Nie, Y.C. Guan, and S.F. Yang, Microstructural Evolution and Properties Analysis of Laser Surface Melted and Al/SiCCladded Magnesium-Rare Earth Alloys, J. Alloys Compd., 2020, 848, p 156598. https://doi.org/10.1016/j.jallcom.2020.15659810.1016/j.jallcom.2020.156598 ↗
46. D.Y. Li, Z.X. Zhang, X.F. Cui, L.T. Feng, D. Zhang, G. Jin, J.N. Liu, and W. Zheng, Effect of Graphite/CeO2 on Microstructure and Tribological Property of Plasma Cladded Co-Based Coatings, Mater. Chem. Phys., 2022, 280, p 125756. https://doi.org/10.1016/j.matchemphys.2022.12575610.1016/j.matchemphys.2022.125756 ↗
47. H. Zhang, K. Chong, G.C. Xiao, Z.P. Sun, and W. Zhao, TIG Cladding In-Situ Nano Vanadium Carbide Reinforced Fe-Based Ultra-Fine Grain Layers Under Water Cooling Condition, Surf. Coat. Technol., 2018, 352, p 222–230. https://doi.org/10.1016/j.surfcoat.2018.08.03210.1016/j.surfcoat.2018.08.032 ↗
48. X.Q. Fu, W.K. Ma, S.L. Duan, Q.Q. Wang, and J.R. Lin, Electrochemical Corrosion Behavior of Ni-Fe-Co-P Alloy Coating Containing Nano-CeO2Particles in NaCl Solution, Materials, 2019, 12(16), p 2614. https://doi.org/10.3390/ma1216261410.3390/ma12162614 ↗
49. Q.M. Liang, W. Wang, Z.S. Chen, and W.M. Lin, Effects of Rare Earth Metal Oxide Doping on Micromorphology and Corrosion Behavior of Hydroxyapatite-graphene Oxide Composite Coating Fabriacted on AZ91 Magnesium Alloy, Int. J. Electrochem. Sci., 2021, 16(6), p 210647. https://doi.org/10.20964/2021.06.2810.20964/2021.06.28 ↗
50. C. Wei, Y.S. Wei, Z.J. Wang, and J.G. Chen, Improving Resistance to Crack and Corrosion of Laser-Cladded TiC/Co-Based Composite Coatings by Doping Minor CeO2, Int. J. Electrochem. Sci., 2022, 17(6), p 220622. https://doi.org/10.20964/2022.06.0210.20964/2022.06.02 ↗