Short-Term Corrosion Behavior and Mechanism of 316 Stainless Steel in Liquid Pb at 650 and 750 °C
Source abstract
Abstract
The corrosion behavior and mechanism of 316 stainless steel (316SS) immersed in liquid Pb were investigated in Ar at 650 and 750 °C, respectively. The oxidation corrosion first dominated at 650 °C. The outer layer of the corroded 316SS surface was the loose iron oxide layer, and the inner layer was dense Fe-Cr spinel. However, the selective dissolution of Ni and Cr was dominant at first at 750 °C, and the O diffused to the interface increased with time, then an inner oxide layer is formed with Ni, Cr, and Fe in inner layer of the matrix. The sizes of pores formed by the dissolution gradually increased with the corrosion time increase, and the dissolved area was also partially transformed into the whole. The selective dissolution corrosion of the corroded 316SS was dominant at 750 °C with the time increase. The interaction mechanism between the liquid lead and 316SS was revealed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. X. Bai, M. Zhang, B. Niu, W. Zhang, X. Wang, J. Wang, D. Wu, L. Wang, and K. Jiang, Rotten Sugarcane Bagasse Derived Biochars with Rich Mineral Residues for Effective Pb (II) Removal in Wastewater and the Tech-economic Analysis, J. Taiwan. Inst Chem. Eng., 2022, 132, p 104231.10.1016/j.jtice.2022.104231 ↗
2. H. Shi, R. Azmi, L. Han, C. Tang, A. Weisenburger, A. Heinzel, J. Maibach, M. Stueber, K. Wang, and G. Mueller, Corrosion Behavior of Al-containing MAX-phase Coatings Exposed to Oxygen Containing Liquid Pb at 600 °C, Corros. Sci., 2022, 201, p 110275.10.1016/j.corsci.2022.110275 ↗
3. B.F. Gromov, Y.S. Belomitcev, E.I. Yefimov, M.P. Leonchuk, P.N. Martinov, Y.I. Orlov, D.V. Pankratov, Y.G. Pashkin, G.I. Toshinsky, and V.V. Chekunov, Use of Lead-bismuth Coolant in Nuclear Reactors and Accelerator-driven Systems, Nucl. Eng. Technol., 1997, 173(1–3), p 207–217.10.1016/S0029-5493(97)00110-6 ↗
4. C.F. Smith, W.G. Halsey, N.W. Brown, J.J. Sienicki, A. Moisseytsev, and D.C. Wade, SSTAR: The US Lead-cooled Fast Reactor (LFR), J. Nucl. Mater., 2008, 376(3), p 255–259.10.1016/j.jnucmat.2008.02.049 ↗
5. A. Alemberti, J. Carlsson, E. Malambu, A. Orden, D. Struwe, P. Agostini, and S. Monti, European Lead Fast Reactor-ELSY, Nucl. Eng. Des., 2011, 241(9), p 3470–3480.10.1016/j.nucengdes.2011.03.029 ↗
6. M. Wang, C. Lian, Y. Li, D. Wang, J. Jiang, and Y. Wu, Preliminary Conceptual Design of a Lead-bismuth Cooled Small Reactor (CLEAR-SR), Int. J. Hydrogen. Energy., 2015, 40(44), p 15132–15136.10.1016/j.ijhydene.2015.03.097 ↗
7. Y. Wu, Y. Bai, Y. Song, Q. Huang, Z. Zhao, and L. Hu, Development Strategy and Conceptual Design of China Lead-based Research Reactor, Ann. Nucl. Energy., 2016, 87, p 511–516.10.1016/j.anucene.2015.08.015 ↗
8. J. Zhang, A Review of Steel Corrosion by Liquid Lead and Lead-bismuth, Corros. Sci., 2009, 51(6), p 1207–1227.10.1016/j.corsci.2009.03.013 ↗
9. L. Rozumova, L. Kosek, J. Vít, A. Hojna, and P. Halodová, Comparison of Corrosion Behavior of the Austenitic Stainless Steel 316L in Static and Flowing Liquid Lead, J. Nucl. Eng. Rad. Sci, 2021, 7(2), p 14049.
10. K. Zhao, G. Wang, C. Deng, N. Liu, W. Zhang, and J. Yang, Influence of Coating Thickness on Microstructure, Mechanical and LBE Corrosion Performance of Amorphous AlCrFeTiNb High-Entropy Alloy Coatings, Surf. Coat. Tech., 2022, 441, p 128502.10.1016/j.surfcoat.2022.128502 ↗
11. Q. Chen, F. Bai, P. Wang, J. Yang, C. Zhu, W. Zhang, H. Liu, Y. Zhong, J. Deng, and N. Liu, Microstructure Response and Lead-bismuth Eutectic Corrosion Behavior of 11Cr1Si Ferritic/martensitic Steel after Au-ion Irradiation, Corros. Sci., 2022, 198, p 110101.10.1016/j.corsci.2022.110101 ↗
12. S.G. Lee, Y.H. Shin, J. Park, and I.S. Hwang, High-Temperature Corrosion Behaviors of Structural Materials for Lead-alloy-cooled Fast Reactor Application, App. Sci., 2021, 11(5), p 2349.10.3390/app11052349 ↗
13. J. Liu, Z. Xiao, Z. Jiang, and L. Luo, Liquid Lead-bismuth Eutectic Embrittlement Effect on the Tensile Properties of T91 Steel at 350 °C, Mater. Corros., 2021, 73(2), p 207–216.10.1002/maco.202112530 ↗
14. K. Lambrinou, E. Charalampopoulou, V. Tom, R. Delville, and D. Schryvers, Dissolution Corrosion of 316L Austenitic Stainless Steels in Contact with Static Liquid Lead-bismuth Eutectic (LBE) at 500 °C, J. Nucl. Mater., 2017, 490, p 9–27.10.1016/j.jnucmat.2017.04.004 ↗
15. R. Wang, X. Qiu, S. Gao, W. Liu, W. Li, Y. Li, and Z. Tang, Corrosion Behavior of 316 Stainless Steel Arc Parts in Liquid Lead at 650 °C under High Oxygen Concentration, RSC. Adv., 2022, 12, p 32700–32707.10.1039/D2RA05165F ↗
16. S. Zhang, J. Cai, and F.A. Yang, The Effect of Impurities Pb, Bi, and PbO on Erosion Properties of Lead-Bismuth Eutectic Alloy on Fe3O4 Oxide Film by First Principle Calculations, Surf. Interface Anal., 2022, 54(7), p 786–793.10.1002/sia.7091 ↗
17. T. Mocek, Effect of Laser Shock Peening Parameters on Residual Stresses and Corrosion Fatigue of AA5083, Metal., 2021, 11(10), p 1635.10.3390/met11101635 ↗
18. A. Alemberti, The Lead Fast Reactor: An Opportunity for the Future?, Eng., 2016, 2, p 59–62.10.1016/J.ENG.2016.01.022 ↗
19. S. Mannepalli, A.R. Shankar, S. Ningshen, and J. Philip, Some Aspects of Pitting Corrosion Susceptibility of As-welded and Thermally Aged Nitrogen-alloyed 316SS Weld Metal, Mater. Corros., 2022, 73(6), p 851–865.10.1002/maco.202112995 ↗
20. A. Deoghar, A. Saraswat, H. Tailor, S. Verma, S. Gupta, C.S. Sasmal, V. Vasava, S. Sahu, A. Prajapati, and R. Bhattacharyay, Entrapment of Impurities Inside a Cold Trap: A Purification Process for Removal of Corrosion Impurities from Liquid Pb-16Li, Nucl. Fusion., 2021, 61(11), p 116027.10.1088/1741-4326/ac2520 ↗
21. H. Shi, Compatibility and Microstructure Evolution of Al-Cr-Fe-Ni High Entropy Model Alloys Exposed to Oxygen-containing Liquid Lead, Corros. Sci., 2021, 189, p 109593.10.1016/j.corsci.2021.109593 ↗
22. J. Xiao, X. Gong, C. Xiang, Z. Yu, and Y. Yin, A Refined Oxidation Mechanism Proposed for Ferritic-martensitic Steels Exposed to Oxygen-saturated Liquid Lead-bismuth Eutectic at 400 °C for 500 h, J. Nucl. Mater., 2021, 549, p 152852.10.1016/j.jnucmat.2021.152852 ↗
23. Z. Lu, X. Peng, Y. Tang, S. Han, Y. Wu, E. Fu, X. Ding, S. Hou, G. Lu, P. Cao, Y. Zhang, X. Liu, D. Ma, H. Wang, S. Jiang, and Z. Lu, Corrosion and Irradiation Behavior of Fe-based Amorphous Coating in Lead-bismuth Eutectic Liquids, Sci. China. Technol. Sc., 2022, 65(2), p 440–449.10.1007/s11431-021-1938-0 ↗
24. K. Lambrinou, V. Koch, G. Coen, J. Van den Bosch, and C. Schroer, Corrosion Scales on Various Steels after Exposure to Liquid Lead-bismuth Eutectic, J. Nucl. Mater., 2014, 450(1–3), p 244–255.10.1016/j.jnucmat.2013.09.034 ↗
25. J. Lim, H.O. Nam, I.S. Hwang, and H.K. Ji, A Study of Early Corrosion Behaviors of FeCrAl Alloys in Liquid Lead-bismuth Eutectic Environments, J. Nucl. Mater., 2010, 407(3), p 205–210.10.1016/j.jnucmat.2010.10.018 ↗
26. W. Ding, M. Zhang, Z. Jiang, M. Zheng, and W. Huang, First Principles Study on the Dissolution Corrosion Behavior of RAFM Steel in the Liquid PbLi, J. Nucl. Mater., 2022, 563, p 153634.10.1016/j.jnucmat.2022.153634 ↗
27. F.G. Ferre, M. Ormellese, F. Fonzo, and M.G. Beghi, Advanced Al2O3 Coatings for High Temperature Operation of Steels in Heavy Liquid Metals: A Preliminary Study, Corros. Sci., 2013, 77, p 375–378.10.1016/j.corsci.2013.07.039 ↗
28. M. Roy, L. Martinelli, K. Ginestar, J. Favergeon, and G. Moulin, Dissolution and Oxidation Behaviour of Various Austenitic Steels and Ni Rich Alloys in Lead-bismuth Eutectic at 520 °C, J. Nucl. Mater., 2016, 468, p 153–163.10.1016/j.jnucmat.2015.11.005 ↗
29. X. Li, R. Liang, Y. Wang, H. Zhu, F. Liu, Y. Liu, C. Li, and F. Niu, An Optimized Numerical Method on Corrosion in the Non–isothermal Lead–bismuth Eutectic Loops with Solid-phase Oxygen Control System, Ann. Nucl. Energy., 2022, 172, p 109084.10.1016/j.anucene.2022.109084 ↗