Investigation of the Mechanical and Corrosive Wear and Biological Behavior of Titanium–5 Manganese–Tricalcium Phosphate Composites Produced by Powder Metallurgy for Hip Implants
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. D.C. Tapscott and C. Wottowa, Orthopedic Implant Materials, StatPearls, (Treasure Island (FL)), StatPearls Publishing, 2024, http://www.ncbi.nlm.nih.gov/books/NBK560505/. Accessed 27 June 2024.
2. L. Risse, S. Woodcock, J.-P. Brüggemann, G. Kullmer and H.A., Richard, Stiffness Optimization and Reliable Design of a Hip Implant by Using the Potential of Additive Manufacturing Processes, Biomed. Eng. OnLine, 2022, 21(1), p 23.10.1186/s12938-022-00990-z ↗
3. M.A. Mont, D.R. Marker, J.M. Smith, S.D. Ulrich and M.S. McGrath, Resurfacing Is Comparable to Total Hip Arthroplasty at Short-Term Followup, Clin. Orthop., 2009, 467(1), p 66–71.10.1007/s11999-008-0465-3 ↗
4. S.D. Ulrich, T.M. Seyler, D. Bennett, R.E. Delanois, K.J. Saleh, I. Thongtrangan, M. Kuskowski, E.Y. Cheng, P.F. Sharkey, J. Parvizi, J.B. Stiehl and M.A. Mont, Total Hip Arthroplasties: What Are the Reasons for Revision?, Int. Orthop., 2008, 32(5), p 597–604.10.1007/s00264-007-0364-3 ↗
5. J.T. Evans, J.P. Evans, R.W. Walker, A.W. Blom, M.R. Whitehouse and A. Sayers, How Long Does a Hip Replacement Last? A Systematic Review and Meta-Analysis of Case Series and National Registry Reports with More than 15 Years of Follow-Up, The Lancet, 2019, 393(10172), p 647–654.10.1016/S0140-6736(18)31665-9 ↗
6. C. KN, N.S. Bhat, M. Zuber and B.S. Shenoy, Evolution of Different Designs and Wear Studies in Total Hip Prosthesis Using Finite Element Analysis A Review, Cogent Eng. Z. Jin Ed., 2022, 9(1), p 2027081.10.1080/23311916.2022.2027081 ↗
7. D. Savio and A. Bagno, When the Total Hip Replacement Fails: A Review on the Stress-Shielding Effect, Processes, 2022, 10(3), p 612.10.3390/pr10030612 ↗
8. A. Bandyopadhyay, I. Mitra, J.D. Avila, M. Upadhyayula and S. Bose, Porous Metal Implants: Processing, Properties, and Challenges, Int. J. Extreme Manuf., 2023, 5(3), 032014.
9. R. Pivec, A.J. Johnson, S.C. Mears and M.A. Mont, Hip Arthroplasty, The Lancet, 2012, 380(9855), p 1768–1777.10.1016/S0140-6736(12)60607-2 ↗
10. A. Najibi and T. Mokhtari, Functionally Graded Materials for Knee and Hip Arthroplasty; an Update on Design, Optimization, and Manufacturing, Compos. Struct., 2023, 322, 117350.10.1016/j.compstruct.2023.117350 ↗
11. M.M. Esmaeili, M. Mahmoodi, A. Mokhtarzade and R. Imani, In Vitro Corrosion and Tribological Behavior of Multiwall Carbon Nanotube-Coated Ti-6Al-4V/Tantalum Carbide Surface for Implant Applications, J. Mater. Eng. Perform., 2022, 31(9), p 7719–7733.10.1007/s11665-022-06766-9 ↗
12. E. Marin and A. Lanzutti, Biomedical Applications of Titanium Alloys: A Comprehensive Review, Materials, 2023, 17(1), p 114.10.3390/ma17010114 ↗
13. M. Semlitsch, Titanium Alloys for Hip Joint Replacements, Clin. Mater., 1987, 2(1), p 1–13.10.1016/0267-6605(87)90015-1 ↗
14. Y. Taşgın, Investigation of Microstructural and Mechanical Properties of Different Titanium Alloys for Gamma Radiation Properties and Implant Applications, J. Mater. Eng. Perform., 2021, 30(8), p 6203–6223.10.1007/s11665-021-05830-0 ↗
15. S. Alipour, S. Nour, S.M. Attari, M. Mohajeri, S. Kianersi, F. Taromian, M. Khalkhali, G.E. Aninwene and L. Tayebi, A Review on in Vitro / in Vivo Response of Additively Manufactured Ti–6Al–4V Alloy, J. Mater. Chem. B, 2022, 10(46), p 9479–9534.10.1039/D2TB01616H ↗
16. P. Mohan, D.K. Rajak, C.I. Pruncu, A. Behera, V. Amigó-Borrás and A.B. Elshalakany, Influence of β-Phase Stability in Elemental Blended Ti-Mo and Ti-Mo-Zr Alloys, Micron, 2021, 142, 102992.10.1016/j.micron.2020.102992 ↗
17. M.H. Qi, J.L. Xu, T. Lai, J. Huang, Y.C. Ma, J.M. Luo and Y.F. Zheng, Novel Bioactive Ti-Zn Alloys with High Strength and Low Modulus for Biomedical Applications, J. Alloys Compd., 2023, 931, 167555.
18. R. Bai, Y. Feng and J. Li, Effect of Extrusion Temperature on the Microstructure, Mechanical Properties, and In Vitro Corrosion Behavior of a Biodegradable Mg-Zn-Ca-Mn-Sn Alloy, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-09836-210.1007/s11665-024-09836-2 ↗
19. Z.E. Kennedy, Shivappa and S. Mohan, Suitability of Magnesium and Titanium Alloys as Implant Materials, Mater. Today Proc., 2022, 55, p 470–473.10.1016/j.matpr.2022.03.210 ↗
20. Z. Sobańska, J. Roszak, K. Kowalczyk and M. Stępnik, Applications and Biological Activity of Nanoparticles of Manganese and Manganese Oxides in In Vitro and In Vivo Models, Nanomaterials, 2021, 11(5), p 1084.10.3390/nano11051084 ↗
21. Y. Alshammari, F. Yang and L. Bolzoni, Mechanical Properties and Microstructure of Ti-Mn Alloys Produced via Powder Metallurgy for Biomedical Applications, J. Mech. Behav. Biomed. Mater., 2019, 91, p 391–397.10.1016/j.jmbbm.2018.12.005 ↗
22. S. Asrar, A. Azmat, I. Channa, J. Ashfaq, F. Sufyan, S. Feroze, A. Chandio, M. Ali Shar and A. Alhazaa, Comparative Study of TiMn and TiAlV Alloys via the Nanoindentation Technique, Crystals, 2022, 12(11), p 1537.10.3390/cryst12111537 ↗
23. A. Ibrahim, F. Zhang, E. Otterstein and E. Burkel, Processing of Porous Ti and Ti5Mn Foams by Spark Plasma Sintering, Mater. Des., 2011, 32(1), p 146–153.10.1016/j.matdes.2010.06.019 ↗
24. V. Chandran, C. Kunjan, V. Veerapandian and R. Kannan, Mechanical, Corrosion and Biological Behavior of Centrifugal Casting Processed Mg–2Zn–1Mn Alloy Reinforced with β Tricalciumphosphate (βTCP) for Orthopaedic Applications, J. Mech. Behav. Biomed. Mater., 2023, 144, 105983.10.1016/j.jmbbm.2023.105983 ↗
25. S. Samavedi, A.R. Whittington and A.S. Goldstein, Calcium Phosphate Ceramics in Bone Tissue Engineering: A Review of Properties and Their Influence on Cell Behavior, Acta Biomater., 2013, 9(9), p 8037–8045.10.1016/j.actbio.2013.06.014 ↗
26. H. Yuan, C.A. Van Blitterswijk, K. De Groot and J.D. De Bruijn, A Comparison of Bone Formation in Biphasic Calcium Phosphate (BCP) and Hydroxyapatite (HA) Implanted in Muscle and Bone of Dogs at Different Time Periods, J. Biomed. Mater. Res. A, 2006, 78A(1), p 139–147.10.1002/jbm.a.30707 ↗
27. C. Caouette, L. Yahia and M.N. Bureau, Reduced Stress Shielding with Limited Micromotions Using a Carbon Fibre Composite Biomimetic Hip Stem: A Finite Element Model, Proc. Inst. Mech. Eng. H, 2011, 225(9), p 907–919.10.1177/0954411911412465 ↗
28. P. Bocchetta, L.-Y. Chen, J.D.C. Tardelli, A.C.D. Reis, F. Almeraya-Calderón and P. Leo, Passive Layers and Corrosion Resistance of Biomedical Ti-6Al-4V and β-Ti Alloys, Coatings, 2021, 11(5), p 487.10.3390/coatings11050487 ↗
29. L. Guo, S. Ataollah Naghavi, Z. Wang, S. Nath Varma, Z. Han, Z. Yao, L. Wang, L. Wang and C. Liu, On the Design Evolution of Hip Implants A Review, Mater. Des., 2022, 216, p 110552.10.1016/j.matdes.2022.110552 ↗
30. B. Liu, H. Wang, N. Zhang, M. Zhang and C.-K. Cheng, Femoral Stems With Porous Lattice Structures: A Review, Front. Bioeng. Biotechnol., 2021, 9, 772539.
31. V. Karageorgiou and D. Kaplan, Porosity of 3D Biomaterial Scaffolds and Osteogenesis, Biomaterials, 2005, 26(27), p 5474–5491.10.1016/j.biomaterials.2005.02.002 ↗
32. G. Ryan, A. Pandit and D. Apatsidis, Fabrication Methods of Porous Metals for Use in Orthopaedic Applications, Biomaterials, 2006, 27(13), p 2651–2670.10.1016/j.biomaterials.2005.12.002 ↗
33. B. Chen, S.K. Moon, X. Yao, G. Bi, J. Shen, J. Umeda and K. Kondoh, Comparison Study on Additive Manufacturing (AM) and Powder Metallurgy (PM) AlSi10Mg Alloys, JOM, 2018, 70(5), p 644–649.10.1007/s11837-018-2793-4 ↗
34. J. Sedlak, D. Rican, M. Piska and L. Rozkosny, Study of Materials Produced by Powder Metallurgy Using Classical and Modern Additive Laser Technology, Procedia Eng., 2015, 100, p 1232–1241.10.1016/j.proeng.2015.01.488 ↗
35. M.-A. Malahias, L. Kostretzis, A. Greenberg, V.S. Nikolaou, A. Atrey and P.K. Sculco, Highly Porous Titanium Acetabular Components in Primary and Revision Total Hip Arthroplasty: A Systematic Review, J. Arthroplasty, 2020, 35(6), p 1737–1749.10.1016/j.arth.2020.01.052 ↗
36. S.A. Naghavi, M. Tamaddon, P. Garcia-Souto, M. Moazen, S. Taylor, J. Hua and C. Liu, A Novel Hybrid Design and Modelling of a Customised Graded Ti-6Al-4V Porous Hip Implant to Reduce Stress-Shielding: An Experimental and Numerical Analysis, Front. Bioeng. Biotechnol., 2023, 11, p 1092361.10.3389/fbioe.2023.1092361 ↗
37. C. Sun, L. Wang, J. Kang, D. Li and Z. Jin, Biomechanical Optimization of Elastic Modulus Distribution in Porous Femoral Stem for Artificial Hip Joints, J. Bionic Eng., 2018, 15(4), p 693–702.10.1007/s42235-018-0057-1 ↗
38. N. Kumar, A. Bharti and M. Dixit, Powder Compaction Dies and Compressibility of Various Materials, Powder Metall. Met. Ceram., 2021, 60(7), p 403–409.10.1007/s11106-021-00253-x ↗
39. B. Sharma, S.K. Vajpai and K. Ameyama, Microstructure and Properties of Beta Ti–Nb Alloy Prepared by Powder Metallurgy Route Using Titanium Hydride Powder, J. Alloys Compd., 2016, 656, p 978–986.10.1016/j.jallcom.2015.10.053 ↗
40. A. Kumar and P.M. Pandey, Development of Mg Based Biomaterial with Improved Mechanical and Degradation Properties Using Powder Metallurgy, J. Magnes. Alloys, 2020, 8(3), p 883–898.10.1016/j.jma.2020.02.011 ↗
41. F.H. Froes and D. Eylon, Powder Metallurgy of Titanium Alloys, Int. Mater. Rev., 1990, 35(1), p 162–184.10.1179/095066090790323984 ↗
42. S.M. Mirbagheri, H. Shahrajabian and M. Rafiei, Effects of Graphene Nanoplatelets on the Microstructure, Mechanical Properties, and Corrosion Behavior of Spark Plasma Sintered Al + 20 Vol.% (TiC + TiB2) Hybrid Composites, J. Mater. Eng. Perform., 2022, 31(5), p 3535–3549.10.1007/s11665-021-06498-2 ↗
43. A.A. Mazen and A.Y. Ahmed, Mechanical Behavior of Al-Al2O3 MMC Manufactured by PM Techniques Part I—Scheme I Processing Parameters, J. Mater. Eng. Perform., 1998, 7(3), p 393–401.10.1361/105994998770347846 ↗
44. A. Kumar and R.B. Singh, Development of Low-Density Steel Nanocomposite Using Mechanical Alloying Followed by Spark Plasma Sintering, J. Mater. Eng. Perform., 2025 https://doi.org/10.1007/s11665-025-10662-310.1007/s11665-025-10662-3 ↗
45. G. Ciobanu, G. Carja, O. Ciobanu, I. Sandu and A. Sandu, SEM and EDX Studies of Bioactive Hydroxyapatite Coatings on Titanium Implants, Micron, 2009, 40(1), p 143–146.10.1016/j.micron.2007.11.011 ↗
46. G.F. Draenert, M. Doeblinger, M. Draenert and M. Gosau, High-Density Polyethylene Facial Implants Show Surface Oxidation in SEM and EDX Examination: A Pilot Study, Acta Biomater., 2009, 5(4), p 1158–1162.10.1016/j.actbio.2008.11.027 ↗
47. A. Kumar, S. Kumar, N.K. Mukhopadhyay, A. Yadav and J. Winczek, Effect of SiC Reinforcement and Its Variation on the Mechanical Characteristics of AZ91 Composites, Materials, 2020, 13(21), p 4913.10.3390/ma13214913 ↗
48. H. Shi, C. Xu, X. Hu, W. Gan, K. Wu and X. Wang, Improving the Young’s Modulus of Mg via Alloying and Compositing – A Short Review, J. Magnes. Alloys, 2022, 10(8), p 2009–2024.10.1016/j.jma.2022.07.011 ↗
49. G. Manivasagam, D. Dhinasekaran and A. Rajamanickam, Biomedical Implants: Corrosion and Its Prevention - A Review, Recent Pat. Corros. Sci., 2010, 2(1), p 40–54.10.2174/1877610801002010040 ↗
50. Y. Hu, D. Dong, X. Wang, H. Chen and Y. Qiao, Synthesis and Properties of Mg-Mn-Zn Alloys for Medical Applications, Materials, 2021, 14(8), p 1855.10.3390/ma14081855 ↗
51. A. Pizzoferrato, G. Ciapetti, S. Stea, E. Cenni, C.R. Arciola and D. GranchiLucia, Cell Culture Methods for Testing Biocompatibility, Clin. Mater., 1994, 15(3), p 173–190.10.1016/0267-6605(94)90081-7 ↗
52. W. Lin, O. Tadai, M. Takahashi, D. Sato, T. Hirose, W. Tanikawa, Y. Hamada and K. Hatakeda, An Experimental Study on Measurement Methods of Bulk Density and Porosity of Rock Samples, J. Geosci. Environ. Prot., 2015, 03(05), p 72–79.
53. K. Bandil, H. Vashisth, S. Kumar, L. Verma, A. Jamwal, D. Kumar, N. Singh, K.K. Sadasivuni and P. Gupta, Microstructural, Mechanical and Corrosion Behaviour of Al–Si Alloy Reinforced with SiC Metal Matrix Composite, J. Compos. Mater., 2019, 53(28–30), p 4215–4223.10.1177/0021998319856679 ↗
54. F. Xie, X. He, S. Cao, M. Mei and X. Qu, Influence of Pore Characteristics on Microstructure, Mechanical Properties and Corrosion Resistance of Selective Laser Sintered Porous Ti–Mo Alloys for Biomedical Applications, Electrochim. Acta, 2013, 105, p 121–129.10.1016/j.electacta.2013.04.105 ↗
55. J.L. Crolet, Mechanisms of Uniform Corrosion under Corrosion Deposits, J. Mater. Sci., 1993, 28(10), p 2589–2606.10.1007/BF00356194 ↗
56. A.H. Mohammed Mohammed, K.A. Shariff, D.A. Wahjuningrum, M.H.A. Bakar, H. Mohamad and A, Comprehensive Review of the Effects of Porosity and Macro- and Micropore Formations in Porous β-TCP Scaffolds on Cell Responses, J. Aust. Ceram. Soc., 2023, 59(4), p 865–879.10.1007/s41779-023-00880-0 ↗
57. C. Liang, Z. Jia and R. Chen, An Automated Particle Size Analysis Method for SEM Images of Powder Coating Particles, Coatings, 2023, 13(9), p 1547.10.3390/coatings13091547 ↗
58. K. Moghadasi, M.S. Mohd Isa, M.A. Ariffin, M.Z. Mohd Jamil, S. Raja, B. Wu, M. Yamani, M.R. Bin Muhamad, F. Yusof, M.F. Jamaludin, M.S.B. Ab Karim, B.B. Abdul Razak and N.B. Yusoff, A Review on Biomedical Implant Materials and the Effect of Friction Stir Based Techniques on Their Mechanical and Tribological Properties, J. Mater. Res. Technol., 2022, 17, p 1054–1121.10.1016/j.jmrt.2022.01.050 ↗
59. U. Ulusoy, A Review of Particle Shape Effects on Material Properties for Various Engineering Applications: From Macro to Nanoscale, Minerals, 2023, 13(1), p 91.10.3390/min13010091 ↗
60. S. Ghosh and S. Abanteriba, Status of Surface Modification Techniques for Artificial Hip Implants, Sci. Technol. Adv. Mater., 2016, 17(1), p 715–735.10.1080/14686996.2016.1240575 ↗
61. X. Lu, Q. Li, M. Guo, J. Zhu, K. Yang, Y. Shu and J. He, Study of the Agglomeration Behaviour of Surface-Modified Molybdenum Powder, Met. Mater. Int., 2021, 27(11), p 4487–4497.10.1007/s12540-020-00651-7 ↗
62. F.G. Evans and H.R. Lissner, Tensile and Compressive Strength of Human Parietal Bone, J. Appl. Physiol., 1957, 10(3), p 493–497.10.1152/jappl.1957.10.3.493 ↗
63. R. Havaldar, S.C. Pilli and B.B. Putti, Insights into the Effects of Tensile and Compressive Loadings on Human Femur Bone, Adv. Biomed. Res., 2014, 3, p 101.10.4103/2277-9175.129375 ↗
64. Y. Li, C. Yang, H. Zhao, S. Qu, X. Li and Y. Li, New Developments of Ti-Based Alloys for Biomedical Applications, Materials, 2014, 7(3), p 1709–1800.10.3390/ma7031709 ↗
65. C. Prakash, S. Singh, S. Ramakrishna, G. Królczyk and C.H. Le, Microwave Sintering of Porous Ti–Nb-HA Composite with High Strength and Enhanced Bioactivity for Implant Applications, J. Alloys Compd., 2020, 824, 153774.10.1016/j.jallcom.2020.153774 ↗
66. N. Shaikh, B.S. Shenoy, N.S. Bhat, S. Shetty and C. KN, Wear Estimation at the Contact Surfaces of Oval Shaped Hip Implants Using Finite Element Analysis, Cogent Eng., 2023, 10(1), p 2222985.10.1080/23311916.2023.2222985 ↗
67. K.S. Hamedani, M. Yadi and H. Esfahani, Influence of Residual Stress on Mechanical and Tribology Behaviors of Calcium-Phosphate Coating on Commercially Pure Titanium via Integrated Electrospinning and Rapid Heating and Cooling Process, J. Mater. Eng. Perform., 2024, 33(15), p 7689–7702.10.1007/s11665-024-09534-z ↗
68. M. Hočevar, B. Šetina Batič, M. Godec, V. Kononenko, D. Drobne and P. Gregorčič, The Interaction Between the Osteosarcoma Cell and Stainless Steel Surface, Modified by High-Fluence, Nanosecond Laser Pulses, Surf. Coat. Technol., 2020, 394, p 125878.10.1016/j.surfcoat.2020.125878 ↗
69. S. Lesz, J. Kraczla and R. Nowosielski, Structure and Compression Strength Characteristics of the Sintered Mg–Zn–Ca–Gd Alloy for Medical Applications, Arch. Civ. Mech. Eng., 2018, 18(4), p 1288–1299.10.1016/j.acme.2018.04.002 ↗
70. K.A. Hing, Bioceramic Bone Graft Substitutes: Influence of Porosity and Chemistry, Int. J. Appl. Ceram. Technol., 2005, 2(3), p 184–199.10.1111/j.1744-7402.2005.02020.x ↗
71. R. Kumar and A. Agrawal, Micro-Hydroxyapatite Reinforced Ti-Based Composite with Tailored Characteristics to Minimize Stress-Shielding Impact in Bio-Implant Applications, J. Mech. Behav. Biomed. Mater., 2023, 142, 105852.10.1016/j.jmbbm.2023.105852 ↗
72. E.F. Morgan, G.U. Unnikrisnan and A.I. Hussein, Bone Mechanical Properties in Healthy and Diseased States, Annu. Rev. Biomed. Eng., 2018, 20(1), p 119–143.10.1146/annurev-bioeng-062117-121139 ↗
73. R. Havaldar, S. Pilli, and B. Putti, Insights into the Effects of Tensile and Compressive Loadings on Human Femur Bone, Adv. Biomed. Res., 2014, 3(1): 101.10.4103/2277-9175.129375 ↗