Investigations on the Microstructural Evolution of SiC/Cu-ABA/Ti6Al4V Braze Joints Subjected to Thermal Cycles

1. D. Sathiyamoorthy and A.K. Suri, “Carbon-Based Materials for Atomic Energy Reactor, Carbon lett., 2003, 4(1), p 36–39.

2. M.E. Westwood, J.D. Webster, R.J. Day, F.H. Hayes, and R. Taylor, Oxidation Protection for carbon Fibre Composites, J. Mater. Sci., 1996, 31(6), p 1389–1397. https://doi.org/10.1007/BF0035784410.1007/BF00357844 ↗

3. K. Suganuma, Y. Miyamoto, and M. Koizumi, Joining of Ceramics and Metals, Annu. Rev. Mater. Sci., 1988, 18(1), p 47–73.10.1146/annurev.ms.18.080188.000403 ↗

4. J. Yang, J. Huang, Z. Ye, R. Shuhai Chen, and Y.Z. Ji, Influence of Interfacial Reaction on Reactive Wettability of Molten Ag-Cu-X wt.% Ti Fller Metal on SiC Ceramic Substrate and Mechanism Analysis, Appl. Surf. Sci., 2018, 436, p 768–778. https://doi.org/10.1016/j.apsusc.2017.12.10610.1016/j.apsusc.2017.12.106 ↗

5. M. Brossa, U. Guerreschi, and M. Rossi, Brazing and Machining of Carbon Based Materials for Plasma Facing Components, J. Nuclear Mater., 1994, 212–215, p 1627–1631. https://doi.org/10.1016/0022-3115(94)91103-710.1016/0022-3115(94)91103-7 ↗

6. S. Hausner and B. Wielage, Brazing of Metal and Ceramic Joints, Woodhead Publish Limited, 2013 https://doi.org/10.1533/9780857096500.2.36110.1533/9780857096500.2.361 ↗

7. P.K. Kota, R. Vaira Vignesh, M. Govindaraju, and H.D.P. Palaparthi, Investigations on the Diffusion Bonding of Titanium Alloy and Aluminum Alloy Using Copper at Low Bonding Pressure, Proceed. Inst. Mech. Eng., Part L: J. Mater.: Design Appl., 2024, 238(5), p 793–809. https://doi.org/10.1177/1464420723120055610.1177/14644207231200556 ↗

8. P.K. Kota, G. Myilsamy, and V.V. Ramalingam, Metallurgical Characterization and Mechanical Properties of Solid–Liquid Compound Casting of Aluminum Alloy: Steel Bimetallic Materials, Metals Mater. Int., 2021, 28(6), p 1416–1422. https://doi.org/10.1007/s12540-021-00979-810.1007/s12540-021-00979-8 ↗

9. A.K. Raghav, R. Vaira Vignesh, K.P. Kalyan, and M. Govindaraju, Friction Welding of Cast Iron and Phosphor Bronze, J. Inst. Eng. (India): Series C, 2020, 101(2), p 347–354. https://doi.org/10.1007/s40032-019-00553-710.1007/s40032-019-00553-7 ↗

10. G. Ghongade, K.P. Kalyan, R. Vaira Vignesh, and M. Govindaraju, Design, Fabrication, and Analysis of Cost Effective Steel Honeycomb Structures, Mater. Today: Proceed., 2021, 46, p 4520–4526. https://doi.org/10.1016/j.matpr.2020.09.69410.1016/j.matpr.2020.09.694 ↗

11. C. Rado, S. Kalogeropoulou, and N. Eustathopoulos, Wetting and Bonding of Ni-Si Alloys on Silicon Carbide, Acta Mater., 1999, 47(2), p 461–473. https://doi.org/10.1016/S1359-6454(98)00374-710.1016/S1359-6454(98)00374-7 ↗

12. H. Shi et al., Interfacial Reaction Mechanism of SiC Joints Joined by Pure Nickel Foil, J. Eur. Ceram. Soc., 2020, 40(15), p 5162–5171. https://doi.org/10.1016/j.jeurceramsoc.2020.07.04810.1016/j.jeurceramsoc.2020.07.048 ↗

13. M. Singh, R. Asthana, and N. Sobczak, Active Brazing of SiC-Base Ceramics to High-Temperature Alloys, J. Mater. Eng. Perform., 2020, 29(8), p 4898–4912. https://doi.org/10.1007/s11665-020-04934-310.1007/s11665-020-04934-3 ↗

14. Z. Zhang, Y. Cai, Y. Liu, and K. Feng, Study on Brazing of SiC Ceramics with Zr-Cu-Nb Filler Metal, J. Mater. Eng. Perform., 2024, 33(16), p 8033–8043. https://doi.org/10.1007/s11665-023-08501-410.1007/s11665-023-08501-4 ↗

15. Y. Liu, Z.R. Huang, and X.J. Liu, Joining of Sintered Silicon Carbide Using Ternary Ag-Cu-Ti Active Brazing Alloy, Ceram. Int., 2009, 35(8), p 3479–3484. https://doi.org/10.1016/j.ceramint.2009.03.01610.1016/j.ceramint.2009.03.016 ↗

16. J. López-Cuevas, H. Jones, and H.V. Atkinson, The Effect of Surface Preoxidation of Sintered Silicon Carbide on its Wettability by Silver–Copper Based Brazing Alloys in Vacuo, Mater. Sci. Eng. A, 1999, 266(1–2), p 161–166. https://doi.org/10.1016/S0921-5093(99)00044-110.1016/S0921-5093(99)00044-1 ↗

17. L. Chen, C. Li, X. Si, Y. Hong, C. Zhang, Z. Xi, J. Cao, and X. Dai, Profiling Interfacial Reaction Features and Mechanical Properties of B4C Ceramic and Ti6Al4V Titanium Alloy Brazed with Ag-Based Brazing Filler, J. Mater. Process. Technol., 2024, 324, p 118272. https://doi.org/10.1016/j.jmatprotec.2023.11827210.1016/j.jmatprotec.2023.118272 ↗

18. J. Li, L. Liu, Y. Wu, Z. Li, W. Zhang, and W. Hu, Microstructure of High Temperature Ti-Based Brazing Alloys and Wettability on SiC Ceramic, Mater. Design, 2009, 30, p 275–279. https://doi.org/10.1016/j.matdes.2008.04.07010.1016/j.matdes.2008.04.070 ↗

19. Q. Ma, Y.W. Chen, S.J. Chen, P. He, X.J. Chen, X. Jin, and B. Zheng, Microstructural and Mechanical Characterizations of SiC–304SS Joints Brazed with Cu–10TiH2 Filler, J. Mater. Res. Technol., 2024, 28, p 3076–3083. https://doi.org/10.1016/j.jmrt.2023.12.22610.1016/j.jmrt.2023.12.226 ↗

20. S. Liu, H. Liu, L. Zhou, H. Cui, M. Liu, L. Chen, M. Wen, H. Dong, F. Liu, W. Wang, and S. Li, Specially Structured AgCuTi Foil Enables High-Strength and Defect-Free Brazing of Sapphire and Ti6Al4V Alloys: The Microstructure and Fracture Characteristics, Materials, 2024, 17(15), p 3812. https://doi.org/10.3390/ma1715381210.3390/ma17153812 ↗

21. B. Zhou and K. Feng, Correction: Zr–Cu Alloy Filler Metal for Brazing SiC Ceramic, RSC Adv., 2018, 8(48), p 27275–27275. https://doi.org/10.1039/C8RA90065E10.1039/C8RA90065E ↗

22. X. Hernandez, C. Jiménez, K. Mergia, P. Yialouris, S. Messoloras, V. Liedtke, C. Wilhelmi, and J. Barcena, An Innovative Joint Structure for Brazing Cf/SiC Composite to Titanium Alloy, J. Mater. Eng. Perform., 2014, 23(8), p 3069–3076. https://doi.org/10.1007/s11665-014-1074-910.1007/s11665-014-1074-9 ↗

23. Z. Yi et al., Joining of Cf/SiC Composite to Ti Alloy Using Composite Filler Materials, Mater. Sci. Eng. A, 2012, 42(1), p 2600–2602. https://doi.org/10.1016/j.msea.2012.11.03110.1016/j.msea.2012.11.031 ↗

24. M.C. Halbig, B.P. Coddington, R. Asthana, and M. Singh, Characterization of Silicon Carbide Joints Fabricated Using SiC Particulate-Reinforced Ag-Cu-Ti Alloys, Ceram. Int., 2013, 39(4), p 4151–4162. https://doi.org/10.1016/j.ceramint.2012.10.27110.1016/j.ceramint.2012.10.271 ↗

25. C. Li, C. Huang, L. Chen, X. Si, Z. Chen, J. Qi, Y. Huang, J. Feng, and J. Cao, Microstructure and Mechanical Properties of the SiC/Nb Joint Brazed Using AgCuTi+B4C Composite Filler Metal, Int. J. Refractory Metals Hard Mater., 2019, 85, p 105049. https://doi.org/10.1016/j.ijrmhm.2019.10504910.1016/j.ijrmhm.2019.105049 ↗

26. X. Dai, J. Cao, Z. Chen, X. Song, and J. Feng, Brazing SiC Ceramic Using Novel B4C Reinforced Ag-Cu-Ti Composite Filler, Ceram. Int., 2016, 42(5), p 6319–6328. https://doi.org/10.1016/j.ceramint.2016.01.02110.1016/j.ceramint.2016.01.021 ↗

27. K. Bobzin, L. Zhao, N. Kopp, and S. Samadian Anavar, Wide Gap Active Brazing of Ceramic-to-Metal-Joints for High Temperature Applications, Front. Mech. Eng., 2014, 9(1), p 71–74. https://doi.org/10.1007/s11465-014-0291-010.1007/s11465-014-0291-0 ↗

28. D. Fortuna, Wide-Gap Brazing a Practical Approach to a Difficult Process, ASM Proc. Heat Treat., 2000, 2, p 1051–1054.

29. J.B. Ravi Teja, K.P. Kalyan, R. Vaira Vignesh, and M. Govindaraju, Vacuum Brazing of Mild Steel Using Eutectic CuSil Brazing Alloy, Mater. Today: Proceed., 2021, 46, p 4919–4924. https://doi.org/10.1016/j.matpr.2020.10.33510.1016/j.matpr.2020.10.335 ↗

30. V. Cazajus, B. Lorrain, H. Welemane, and M. Karama, Residual Stresses in Ceramic Metal Assembly after Brazing Process, Adv. Sci. Technol., 2006, 45, p 1543–1550. https://doi.org/10.4028/www.scientific.net/ast.45.154310.4028/www.scientific.net/ast.45.1543 ↗

31. Y. Zhang, T. Liu, J. Zhang, C. Wu, X. Lu, and W. Ding, Induction Brazing BaCo0.7Fe0.2Nb0.1O3-Δ Membrane Tubes to Steel Supports with Ag-Based Filler in Air, J. Memb. Sci., 2017, 533, p 19–27. https://doi.org/10.1016/j.memsci.2017.03.02410.1016/j.memsci.2017.03.024 ↗

32. J. Zhang, J. Zhang, L. Li, C. Zhang, Y. Zhang, and X. Lu, Stress Analysis of the Brazing Joints of Tubular Ceramic Oxygen-Permeable Membranes and Metal Supports, Ceram. Int., 2019, 45(2), p 1545–1553. https://doi.org/10.1016/j.ceramint.2018.10.02810.1016/j.ceramint.2018.10.028 ↗

33. J. Lankford, “Compressive Strength and Damage Mechanisms in Ceramic Materials,” Off. Nav. Res., p. 50, 1980.

34. N. Dandapat and S. Ghosh, Interfacial and Cross-sectional Studies of Thermally Cycled Alumina-Monel Brazed Joint, Trans. Indian Ceram. Soc., 2020, 79(3), p 152–157. https://doi.org/10.1080/0371750X.2020.178786510.1080/0371750X.2020.1787865 ↗

35. K.S. Weil, C.A. Coyle, J.T. Darsell, G.G. Xia, and J.S. Hardy, Effects of Thermal Cycling and Thermal Aging on the Hermeticity and Strength of Silver–Copper Oxide Air-Brazed Seals, J. Power. Sources, 2005, 152(1–2), p 97–104. https://doi.org/10.1016/j.jpowsour.2005.01.05310.1016/j.jpowsour.2005.01.053 ↗

36. A. Fukumoto, D. Berry, K.D.T. Ngo, and G.Q. Lu, Effects of Extreme Temperature Swings (− 55 °C to 250 °C) on Silicon Nitride Active Metal Brazing Substrates, IEEE Trans. Device Mater. Reliab., 2014, 14(2), p 751–756. https://doi.org/10.1109/TDMR.2014.232005710.1109/TDMR.2014.2320057 ↗

37. B.P. Coddington, R. Asthana, M.C. Halbig, and M. Singh, Active Metal Brazing and Characterization of Brazed Joints Between Silicon Carbide and Metallic Systems, Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV: Ceramic Engineering and Science Proceedings. T. Ohji, M. Singh, S. Mathur Ed., Wiley, 2010, p 149–161. https://doi.org/10.1002/9780470944066.ch1410.1002/9780470944066.ch14 ↗

38. M. Singh, R. Asthana, and T.P. Shpargel, Brazing of Carbon–Carbon Composites to Cu-Clad Molybdenum for Thermal Management Applications, Mater. Sci. Eng. A, 2007, 452–453, p 699–704. https://doi.org/10.1016/j.msea.2006.11.03110.1016/j.msea.2006.11.031 ↗

39. Y. Qin and J. Feng, Microstructure and Mechanical Properties of C/C Composite/TC4 Joint Using AgCuTi Filler Metal, Mater. Sci. Eng. A, 2007, 454–455, p 322–327. https://doi.org/10.1016/j.msea.2006.11.05610.1016/j.msea.2006.11.056 ↗

40. M. Singh, T.P. Shpargel, G.N. Morscher, and R. Asthana, Active Metal Brazing and Characterization of Brazed Joints in Titanium to Carbon–Carbon Composites, Mater. Sci. Eng. A, 2005, 412(1–2), p 123–128. https://doi.org/10.1016/j.msea.2005.08.17910.1016/j.msea.2005.08.179 ↗

41. J. O. F. Ceramics, “JOINING OF CERAMICS,” 1988.

42. H. Okamoto, C-Ti (Carbon–Titanium), J. Phase Equilibria Diffus., 2006, 27(3), p 306–307. https://doi.org/10.1361/154770306x10998010.1361/154770306x109980 ↗

43. J.V. Naidich, The Wettability of Solids by Liquid Metals, Elsevier, 1981. https://doi.org/10.1016/B978-0-12-571814-1.50011-710.1016/B978-0-12-571814-1.50011-7 ↗

44. G.N. Morscher, M. Singh, T. Shpargel, and R. Asthana, A Simple Test to Determine the Effectiveness of Different Braze Compositions for Joining Ti-tubes to C/C Composite Plates, Mater. Sci. Eng. A, 2006, 418(1–2), p 19–24. https://doi.org/10.1016/j.msea.2005.10.06710.1016/j.msea.2005.10.067 ↗

45. M. Singh, J.M. Fernandez, R. Asthana, and J.R. Rico, Interfacial Characterization of Silicon Nitride / Silicon Nitride Joints Brazed Using Cu-Base Active Metal Interlayers, Ceram. Int., 2012, 38(4), p 2793–2802. https://doi.org/10.1016/j.ceramint.2011.11.05010.1016/j.ceramint.2011.11.050 ↗

46. W. Li, K. Chen, L. Liu, Y. Yang, and S. Zhu, Effect of SiO2-Al2O3 Glass Composite Coating on the Oxidation Behavior of ti60 Alloy, Materials (Basel), 2020, 13(22), p 1–14. https://doi.org/10.3390/ma1322508510.3390/ma13225085 ↗

47. Y. Iijima, K. Hoshino, and K.I. Hirano, Diffusion of Titanium in Copper, Metall. Trans. A, 1977, 8(6), p 997–1001. https://doi.org/10.1007/BF0266158510.1007/BF02661585 ↗

48. A. Kuper, H. Letaw, L. Slifkin, E. Sonder, and C.T. Tomizuka, Self-Diffusion in Copper, Phys. Rev., 1954, 96(5), p 1224–1225. https://doi.org/10.1103/PhysRev.96.122410.1103/PhysRev.96.1224 ↗

49. L.L. Araújo and M. Behar, Al and Ag Diffusion Study in α-Titanium, Appl. Phys. A, 2000, 71(2), p 169–174. https://doi.org/10.1007/PL0002111410.1007/PL00021114 ↗

50. J.L. Murray, The Cu-Ti (Copper–Titanium) System, Bull. Alloy Phase Diagrams, 1983, 4(1), p 81–95. https://doi.org/10.1007/BF0288032910.1007/BF02880329 ↗

51. E. Ganjeh, H. Sarkhosh, M.E. Bajgholi, H. Khorsand, and M. Ghaffari, Increasing Ti-6Al-4V Brazed Joint Strength Equal to the Base Metal by Ti and Zr Amorphous Filler Alloys, Mater. Characteriz., 2012, 71, p 31–40. https://doi.org/10.1016/j.matchar.2012.05.01610.1016/j.matchar.2012.05.016 ↗

52. Y. Duan, Y. Mao, Z. Xu, Q. Deng, G. Wang, and S. Wang, Joining of Graphite to Ti6Al4V Alloy Using Cu-Based Fillers, Adv. Eng. Mater., 2019, 21(11), p 1–9. https://doi.org/10.1002/adem.20190071910.1002/adem.201900719 ↗

53. C. Arvieu, J.P. Manaud, and J.M. Quenisset, Interaction Between Titanium and Carbon at Moderate Temperatures, J. Alloys Compd., 2004, 368(1–2), p 116–122. https://doi.org/10.1016/j.jallcom.2003.08.05110.1016/j.jallcom.2003.08.051 ↗

54. A. Levy, Thermal Residual Stresses in Ceramic-to-Metal Brazed Joints, J. Am. Ceram. Soc., 1991, 74(9), p 2141–2147. https://doi.org/10.1111/j.1151-2916.1991.tb08273.x10.1111/j.1151-2916.1991.tb08273.x ↗

55. W.J. Zhu, J. Wang, L.B. Liu, H.S. Liu, Z.P. Jin, and C. Leinenbach, Modeling and Simulation of the TiC Reaction Layer Growth During Active Brazing of Diamond Using DICTRA, Comput. Mater. Sci., 2013, 78, p 74–82. https://doi.org/10.1016/j.commatsci.2013.05.02510.1016/j.commatsci.2013.05.025 ↗

56. R.L. Williamson, B.H. Rabin, and G.E. Byerly, FEM Study of the Effects of Interlayers and Creep in Reducing Residual Stresses and Strains in Ceramic-Metal Joints, Compos. Eng., 1995, 5(7), p 851–863. https://doi.org/10.1016/0961-9526(95)00035-L10.1016/0961-9526(95)00035-L ↗

57. D.P. Sekulić, Advances in brazing, Woodhead Publishing Limited, 2013. https://doi.org/10.1533/978085709650010.1533/9780857096500 ↗

58. Y.K. Kim, H. Pouraliakbar, and S.I. Hong, Effect of Interfacial Intermetallic Compounds Evolution on the Mechanical Response and Fracture of Layered Ti/Cu/Ti Clad Materials, Mater. Sci. Eng. A, 2020, 772, 138802. https://doi.org/10.1016/j.msea.2019.13880210.1016/j.msea.2019.138802 ↗

59. Y. Mao, S. Wang, L. Peng, and Q. Deng, Brazing of Graphite to Cu with Cu50TiH 2 + C Composite Filler, J. Mater. Sci., 2016, 51(4), p 1671–1679. https://doi.org/10.1007/s10853-015-9415-010.1007/s10853-015-9415-0 ↗

60. “ACTIVE METAL BRAZING OF CARBON-CARBON COMPOSITES TO TITANIUM M. Singh’, T.P. Shpargel’, G. Morsche?, and R. Asthana3,” Science (80-. )., 2018.

61. J.M. Fernandez, R. Asthana, M. Singh, and F.M. Valera, Active Metal Brazing of Silicon Nitride Ceramics Using a Cu-Based Alloy and Refractory Metal Interlayers, Ceram. Int., 2016, 42(4), p 5447–5454. https://doi.org/10.1016/j.ceramint.2015.12.08710.1016/j.ceramint.2015.12.087 ↗