Performance Assessment of Single- and Dual-Jet Enriched MQL-Assisted Machining of Hardened Steel toward Environmental Sustainability
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. F.J. Amigo, G. Urbikain, O. Pereira, P. Fernández-Lucio, A. Fernández-Valdivielso, and L.N.L. De Lacalle, Combination of high feed turning with cryogenic cooling on Haynes 263 and Inconel 718 superalloys, J. Manuf. Process., 2020, 58, p 208–222.10.1016/j.jmapro.2020.08.029 ↗
2. E.A. Rahim and H. Dorairaju, Evaluation of mist flow characteristic and performance in minimum quantity lubrication (MQL) machining, Measurement, 2018, 123, p 213–225.10.1016/j.measurement.2018.03.015 ↗
3. S. Khatai, A.K. Sahoo, R. Kumar, and A. Panda, Recent research progress on various cooling and lubrication techniques used in sustainable hard machining: a comprehensive review, Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., 2023, 238, p 3009–3053.10.1177/09544089231169655 ↗
4. N.M. Tuan, T.M. Duc, T.T. Long, V.L. Hoang and T.B. Ngoc, Investigation of machining performance of MQL and MQCL hard turning using nano cutting fluids, Fluids, 2022, 7, p 143.10.3390/fluids7050143 ↗
5. M. Craig, J. Raval, B. Tai, A. Patterson and W. Hung, Effect of channel roughness on micro-droplet distribution in internal minimum quantity lubrication, Dynamics, 2022, 2, p 19.10.3390/dynamics2040019 ↗
6. H. González, A. Calleja, O. Pereira, N. Ortega, L.N.L. De Lacalle and M. Barton, Super abrasive machining of integral rotary components using grinding flank tools, Metals, 2018, 8, p 24. https://doi.org/10.3390/met801002410.3390/met8010024 ↗
7. S. Debnath, M. Reddy and Q. Yi, Environmental friendly cutting fluids and cooling techniques in machining: a review, J. Clean. Prod., 2014, 83, p 33–47.10.1016/j.jclepro.2014.07.071 ↗
8. O. Pereira, A. Rodríguez, A.I. Fernández-Abia, J. Barreiro and L.N.L. De Lacalle, Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304, J. Clean. Prod., 2016, 139, p 440–449.10.1016/j.jclepro.2016.08.030 ↗
9. O. Pereira, G. Urbikain, A. Rodríguez, A. Fernández-Valdivielso, A. Calleja, I. Ayesta and L.N.L. De Lacalle, Internal cryolubrication approach for Inconel 718 milling, Procedia Manuf., 2017, 13, p 89–93.10.1016/j.promfg.2017.09.013 ↗
10. T. Leppert, Surface layer properties of AISI 316L steel when turning under dry and with minimum quantity lubri-cation conditions, Proc IMechE Part B, J. Eng Manuf., 2012, 226, p 617–631.10.1177/0954405411429894 ↗
11. S. Zhang, J.F. Li and Y.W. Wang, Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions, J. Clean. Prod., 2012, 32, p 81–87.10.1016/j.jclepro.2012.03.014 ↗
12. S. Bhowmick and A.T. Alpas, The role of diamond-like carbon coated drills on minimum quantity lubrication drilling of magnesium alloys, Surf Coatings Technol., 2011, 205, p 5302–5311.10.1016/j.surfcoat.2011.05.037 ↗
13. J.A. Sanchez, I. Pombo, R. Alberdi, B. Izquierdo, N. Ortega, S. Plaza and J. Martinez-Toledano, Machining evalua-tion of a hybrid MQL-CO2 grinding technology, J. Clean. Prod., 2010, 18, p 1840–1849.10.1016/j.jclepro.2010.07.002 ↗
14. B. Arsene, C. Gheorghe, F.A. Sarbu, M. Barbu, L.-I. Cioca and G. Calefariu, MQL-assisted hard turning of AISI D2 steel with corn oil: Analysis of surface roughness, tool wear, and manufacturing costs, Metals, 2021, 11, p 2058.10.3390/met11122058 ↗
15. .A. Chavan and V.G. Sargade, Statistical and Multi-attribute Analysis in Hardened Steel Turning under Vegetable Oil-Based MQL. In: Techno-Societal 2020; Springer: New York, (2021), p. 777–78910.1007/978-3-030-69925-3_75 ↗
16. S. Das, B.B. Patel, N.S. Biswal and A. Pradhan, Performance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steel, Measurement, 2020, 150, p 107079.10.1016/j.measurement.2019.107079 ↗
17. M. Mia and N.R. Dhar, Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy, J. Mat. Process Technol., 2018, 252, p 688–696.10.1016/j.jmatprotec.2017.10.040 ↗
18. M. Mia and N.R. Dhar, Influence of single and dual cryogenic jets on machinability characteristics in turning of Ti-6Al-4V, Proc. IMechE Part B: J. Eng. Manuf., 2019, 233, p 711–726.10.1177/0954405417737581 ↗
19. N.A. Özbek, O. Özbek, F. Kara and H. Saruhan, Effect of eco-friendly minimum quantity lubrication in hard machining of vanadis 10: a high strength steel, Steel Res. Int., 2022, 93, p 2100587.10.1002/srin.202100587 ↗
20. A. Yassin and C.Y. Teo, Effect of pressure and nozzle angle of minimal quantity lubrication on cutting temperature and tool wear in turning, Appl. Mech. Mater., 2014, 695, p 676–679.10.4028/www.scientific.net/AMM.695.676 ↗
21. S.A.S. Amiril, E.A. Rahim and A.Z. Hishamudin, Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045, J. Phys. Conf. Ser., 2019, 1150, 012045.
22. A. Kumar, G. Singh and V. Aggarwal, Analysis and optimization of nozzle distance during turning of EN-31 steel using minimum quantity lubrication, Mater. Today Proc., 2021, 49, p 1360–1366.10.1016/j.matpr.2021.07.060 ↗
23. S.A. Niknam and A. Jalali, Effects of lubricants and flow rates on the surface roughness and chip thickness when MQL turning of aero-engine aluminum alloys 6061–T6 and 7076–T6, Int. J. Adv. Manuf. Technol., 2020, 110, p 2015–2022.10.1007/s00170-020-05979-3 ↗
24. H. Gürbüz, Y.E. Gönülaçar and Ş Baday, Effect of MQL flow rate on machinability of AISI 4140 steel, Mach. Sci. Technol., 2020, 24, p 663–687.10.1080/10910344.2020.1752234 ↗
25. M. Mia, M.H. Razi, I. Ahmad, R. Mostafa, S.M.S. Rahman, D.H. Ahmed, P.R. Dey and N.R. Dhar, Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network, Int. J. Adv. Manuf. Technol., 2017, 91, p 3211–3223.10.1007/s00170-016-9978-1 ↗
26. P.B. Zaman and N.R. Dhar, Design and evaluation of an embedded double jet nozzle for MQL delivery intending machinability improvement in turning operation, J. Manuf. Process., 2019, 44, p 179–196.10.1016/j.jmapro.2019.05.047 ↗
27. S. Masoudi, A. Vafadar, M. Hadad and F. Jafarian, Experimental investigation into the effects of nozzle position, workpiece hardness, and tool type in MQL turning of AISI 1045 steel, Mater. Manuf. Processes, 2017, 33, p 1011–1019.10.1080/10426914.2017.1401716 ↗
28. J.B. Saedon, Micromilling of Hardened (62 HRC) AISI D2 Cold Work Tool Steel Doctor of philosophy thesis. The University of Birmingham UK, (2011)10.4028/www.scientific.net/AMR.445.62 ↗
29. S.R. Das, A. Panda and D. Dhupal, Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert, Mech. Adv. Mater. Mod. Process., 2017, 3, p 9.10.1186/s40759-017-0025-1 ↗
30. V.N. Gaitonde, S.R. Karnik and J.P. Davim, Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass, J. Mater. Process. Technol., 2007, 204, p 459–464.10.1016/j.jmatprotec.2007.11.193 ↗
31. S.K. Tamang, M. Chandrasekaran and A.K. Sahoo, Sustainable machining: an experimental investigation and optimization of machining Inconel 825 with dry and MQL approach, J. Braz. Soc. Mech. Sci. Eng., 2018, 40, p 1–8.10.1007/s40430-018-1294-2 ↗
32. Y. Touggui, A. Uysal, U. Emiroglu, E. Dzhemilov, and S. Belhadi, Improvement of the MQL Efficiency in Machining Stainless Steel by Adding Nanoparticles to the Cutting Fluid. In: Lecture notes in mechanical engineering, (2021), p. 219–228.10.1007/978-3-030-91327-4_22 ↗
33. M. Özdemir, A. Şahinoğlu, M. Rafighi and V. Yilmaz, Analysis and optimisation of the cutting parameters based on machinability factors in turning AISI 4140 steel, Canadian Metall. Quart., 2022, 61(4), p 407–417.10.1080/00084433.2022.2058154 ↗
34. J. Sharma and B.S. Sidhu, Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil, J. Clean. Prod., 2014, 66, p 619–623.10.1016/j.jclepro.2013.11.042 ↗
35. S. Khatai, A.K. Sahoo, R. Kumar and A. Panda, Performance assessment of graphene oxide based nano-cutting fluids during sustainable hard turning through synthesis, characterization and machinability investigation, Diam. Relat. Mater., 2024, 149, 111657.10.1016/j.diamond.2024.111657 ↗
36. V.C. Panagiotopoulou, P. Stavropoulos and G. Chryssolouris, A critical review on the environmental impact of manufacturing: a holistic perspective, Int. J. Adv. Manuf. Technol., 2021, 118, p 603–625.10.1007/s00170-021-07980-w ↗
37. D. Cica and D. Kramar, Machinability investigation and sustainability analysis of high-pressure coolant assisted turning of the nickel-based superalloy Inconel 718, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2022, 237, p 43–54.10.1177/09544054221092939 ↗
38. Q. Wang, Z. Huang, J. Hu and Z. Liu, A carbon emission evaluation method for remanufacturing process of a used vehicle CVT gearbox, IEEE Access, 2020, 8, p 193257–193267.10.1109/ACCESS.2020.3027709 ↗
39. E. Usluer, U. Emiroğlu, Y.F. Yapan, G. Kshitij, N. Khanna, M. Sarıkaya and A. Uysal, Investigation on the effect of hybrid nanofluid in MQL condition in orthogonal turning and a sustainability assessment, Sustain. Mater. Technol., 2023, 36, e00618.
40. N.A. Raof, J.A. Ghani, J. Syarif, C.H.C. Haron and M.A. Hadi, Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel, Appl. Mech. Mater., 2014, 554, p 7–11.10.4028/www.scientific.net/AMM.554.7 ↗
41. P. Muthuswamy, Comparison of machining forces, power consumption, and specific cutting energy in tools with grooved cutting edges for sustainable manufacturing. Adv. Mater. Process. Tech. (2024). https://doi.org/10.1080/2374068X.2024.240296910.1080/2374068X.2024.2402969 ↗
42. M. Günay and M.E. Korkmaz, Understanding the relationship between surface quality and chip morphology under sustainable cutting environments, Materials, 2024, 17, p 1826.10.3390/ma17081826 ↗
43. A.I. Fernández-Abia, J. Barreiro, L.N.L. de Lacalle and S. Martínez-Pellitero, Behavior of austenitic stainless steels at high speed turning using specific force coefficients, Int. J. Adv. Manuf. Technol., 2012, 62, p 505–515.10.1007/s00170-011-3846-9 ↗
44. M.A. Shalaby and S.C. Veldhuis, Tool wear and chip formation during dry high speed turning of direct aged Inconel 718 aerospace superalloy using different ceramic tools, Proc. Inst. Mech. Eng. Part J. Eng. Tribol., 2019, 233, p 1127–1136.10.1177/1350650118822388 ↗
45. S. Roy, R. Kumar, A. Panda, A.K. Sahoo, M. Rafighi and D. Das, A comparative performance investigation of single- and double-nozzle pulse mode minimum quantity lubrication systems in turning super-duplex steel using a weighted PUGH matrix sustainable approach, Sustainability, 2023, 15, p 15160.10.3390/su152015160 ↗
46. Y. Zhang, Q. Zhang, M. Wu, M. Wu and H. Su, High-Pressure cooling effects on tool wear mechanism and chip formation GH4169 in Super alloy turning, Wear, 2024, 564, p 205675.
47. L. Dash, S. Padhan, A. Das and S.R. Das, Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci., 2021, 235, p 6496–6528.10.1177/0954406221993844 ↗
48. A. Perec and A. Radomska-Zalas, WASPAS optimization in advanced manufacturing, Procedia Comp. Sci., 2022, 207, p 1193–1200.10.1016/j.procs.2022.09.175 ↗
49. P.V. Reddy, G.S. Kumar and V.S. Kumar, Multi-response optimization in machining Inconel-625 by abrasive water jet machining process using WASPAS and MOORA, Arabian J. Sci. Eng., 2020, 45, p 9843–9857.10.1007/s13369-020-04959-9 ↗
50. R. Kumar, P.S. Bilga and S. Singh, Multi objective optimization using different methods of assigning weights to energy consumption responses, surface roughness and material removal rate during rough turning operation, J. Clean. Prod., 2017, 164, p 45–57.10.1016/j.jclepro.2017.06.077 ↗
51. S. Khatai, R. Kumar, A. Panda and A.K. Sahoo, WASPAS based multi response optimization in hard turning of AISI 52100 steel under ZnO nanofluid assisted dual nozzle pulse-MQL environment, Appl. Sci., 2023, 13, p 10062.10.3390/app131810062 ↗
52. H.-S. Yoon, M.-S. Kim, K.-H. Jang and S.-H. Ahn, Future perspectives of sustainable manufacturing and applications based on research databases, Int. J. Precis. Eng. Manuf., 2016, 17, p 1249–1263.10.1007/s12541-016-0150-5 ↗
53. S. Padhan, A. Das, A. Santoshwar, T.R. Dharmendrabhai and S.R. Das, Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments, SILICON, 2021, 13, p 119–147.10.1007/s12633-020-00409-1 ↗
54. S. Masoudi, M.J. Esfahani, F. Jafarian and S.A. Mirsoleimani, Comparison the effect of MQL, wet and dry turning on surface topography, cylindricity tolerance and sustainability, Int. J. Precis. Eng. Manuf. Green Technol., 2019, 10, p 9–21.10.1007/s40684-019-00042-3 ↗
55. H. Gürbüz and Y.E. Gönülaçar, Experimental and statistical investigation of the effects of MQL, dry and wet machining on machinability and sustainability in turning of AISI 4140 steel, Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., 2022, 236, p 1808–1823.10.1177/09544089221076243 ↗
56. M. Mia, M.K. Gupta, G. Singh, G. Królczyk and D.Y. Pimenov, An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions, J. Clean. Prod., 2018, 187, p 1069–1081.10.1016/j.jclepro.2018.03.279 ↗
57. G.H.N. Fernandes, E.R. Ferreira, P.H.P. França, L.M.Q. Barbosa, E.B. Filho, P.S. Martins and Á.R. Machado, Internally cooled tools as an innovative solution for sustainable machining: temperature investigation using Inconel 718 superalloy, CIRP J. Manuf. Sci. Technol., 2024, 50, p 269–284.10.1016/j.cirpj.2024.03.001 ↗