Machine Learning Prediction and Optimization of Cold Metal Transfer Welding Parameters for Enhancing the Mechanical and Microstructural Properties of Austenitic-Ferritic Stainless-Steel Joints
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. X. Wen, S. Liu, X. Gao, B. Zhang, Y. Wang, Y. Chen, S. Qiao, F. Wang, N. Li, Y. Shi, and C. Yuan, Investigation of Microstructure and Mechanical Properties in Dissimilar-Metal Welding between Ferritic Stainless Steel and Co-Based Superalloy Using Electron Beam Welding, J. Mater. Res. Technol., 2023, 26, p 5177–5192.10.1016/j.jmrt.2023.08.254 ↗
2. R.A. Kannan, N.S. Shanmugam, and S. Naveenkumar, Effect of Arc Length Correction on Weld Bead Geometry and Mechanical Properties of AISI 316L Weldments by Cold Metal Transfer (CMT) Process. In: Material Today Proceedings, Elsevier Ltd., 2019, 18, pp 3916–3921, https://doi.org/10.1016/j.matpr.2019.07.331.10.1016/j.matpr.2019.07.331 ↗
3. M. SarkariKhorrami, M.A. Mostafaei, H. Pouraliakbar, and A.H. Kokabi, Study on Microstructure and Mechanical Characteristics of Low-Carbon Steel and Ferritic Stainless Steel Joints, Mater. Sci. Eng. A, 2014, 608, p 35–45. https://doi.org/10.1016/j.msea.2014.04.06510.1016/j.msea.2014.04.065 ↗
4. M.E. Kocadagistan, O. Çinar, and T. Teker, Weldability and Mechanical Behavior of CMT Welded AISI 430 and HARDOX 500 Steels, Mater. Test., 2023, 65(9), p 1302–1310.10.1515/mt-2023-0169 ↗
5. I.J. Singh, Q. Murtaza, and P. Kumar, Effect of Welding Speed on Metallurgical Characterization of CMT Welding of Dissimilar Aluminium Alloys of AA6061 and AA8011, SILICON, 2024, 16(9), p 3891–3903. https://doi.org/10.1007/s12633-024-02961-610.1007/s12633-024-02961-6 ↗
6. R. Nishimura, S. Ren, M. Suefusa, K. Narasaki, and N. Ma, Thermal-Mechanical Analysis of Welding Deformation and Residual Stress in TS1500/SPC1180 Lap Joints Using Cold Metal Transfer Welding, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-08730-710.1007/s11665-023-08730-7 ↗
7. M. Arivarasu, D. RamkumarKasinath, and A. Natarajan, Effect of Continuous and Pulsed Current on the Metallurgical and Mechanical Properties of Gas Tungsten Arc Welded AISI 4340 Aeronautical and AISI 304 L Austenitic Stainless Steel Dissimilar Joints, Mater. Res., 2015, 18(1), p 59–77.10.1590/1516-1439.269714 ↗
8. C.H. Huang, C.H. Hou, T.S. Hsieh, L. Tsai, and C.C. Chiang, Investigation of Distinct Welding Parameters on Mechanical and Corrosion Properties of Dissimilar Welded Joints between Stainless Steel and Low Carbon Steel, Sci. Prog., 2022, 105(4), p 1–18.10.1177/00368504221126795 ↗
9. Z. Liu, L. Qiao, R. Cao, H. Dong, C. Wang, H. Che, T. Wang, and Y. Yan, A Comparative Study on Microstructure, Mechanical Properties and Corrosion Resistance of M390 and 304 with Different Welding Methods, J. Mater. Eng. Perform., 2024, 33(16), p 8242–8254. https://doi.org/10.1007/s11665-023-08523-y10.1007/s11665-023-08523-y ↗
10. S. Emami, S. Sadeghi-Kanani, T. Saeid, and F. Khan, Dissimilar Friction Stir Welding of AISI 430 Ferritic and AISI 304L Austenitic Stainless Steels, Arch. Civ. Mech. Eng., 2020, 20(4), p 1–16. https://doi.org/10.1007/s43452-020-00138-710.1007/s43452-020-00138-7 ↗
11. E. Ünel and E. Taban, Properties and Optimization of Dissimilar Aluminum Steel CMT Welds, Weld. World, 2017, 61(1), p 1–9. https://doi.org/10.1007/s40194-016-0386-910.1007/s40194-016-0386-9 ↗
12. T.B. Thiagarajan, D. Raguraman, and S. Ponnusamy, Optimization of CMT Welding Parameters of Stellite-6 on AISI316L Alloy Using TOPSIS Method, Int. J. Integr. Eng., 2023, 15(1), p 161–172.10.30880/ijie.2023.15.01.014 ↗
13. S.B. AnkushKhansole and K.S. Arora, Effect of CMT Process Parameters on Bead Geometry of Al to Steel Dissimilar Joint, Mech. Mach. Sci., 2023, 15(1), p 243–250.
14. A.R. Kannan, N.S. Shanmugam, and S.A. Vendan, Effect of Cold Metal Transfer Process Parameters on Microstructural Evolution and Mechanical Properties of AISI 316L Tailor Welded Blanks, Int. J. Adv. Manuf. Technol., 2019, 103(9–12), p 4265–4282.10.1007/s00170-019-03856-2 ↗
15. Y. Koli, N. Yuvaraj, and S. Aravindan, Multi-Response Mathematical Model for Optimization of Process Parameters in CMT Welding of Dissimilar Thickness AA6061-T6 and AA6082-T6 Alloys Using RSM-GRA Coupled with PCA, Adv. Ind. Manuf. Eng., 2021, 2, p 100050. https://doi.org/10.1016/j.aime.2021.10005010.1016/j.aime.2021.100050 ↗
16. P. Pavan, M.K. Talari, N.K. Babu, A.U. Rehman, and P. Srirangam, Effect of Heat Treatment on the Microstructure and Mechanical Properties of Rotary Friction Welded Dissimilar IN718 to SS304L Alloys, Appl. Sci., 2023, 13(6), p 3584.10.3390/app13063584 ↗
17. M. Shojaati and B. Beidokhti, Characterization of AISI 304/AISI 409 Stainless Steel Joints Using Different Filler Materials, Constr. Build. Mater., 2017, 147, p 608–615. https://doi.org/10.1016/j.conbuildmat.2017.04.18510.1016/j.conbuildmat.2017.04.185 ↗
18. M.A. Khattak, S. Zaman, M. Nasir Tamin, S. Badshah, S. Mushtaq, A. Amhmad, B. Omran, and P. AkademiaBaru, Effect of Welding Phenomenon on the Microstructure and Mechanical Properties of Ferritic Stainless Steel-A Review, Open J. Adv. Res. Mater. Sci., 2017, 32(1), p 13–31.
19. H. Xiang, C. Xu, T. Zhan, L. Wu, H. Wang, and L. Li, Influence of Metal Transfer Modes on Pore Formation during the Welding Process of AA6082/A360 Dissimilar Aluminum Alloys, J. Mater. Eng. Perform., 2023, 32(19), p 8750–8766. https://doi.org/10.1007/s11665-022-07757-610.1007/s11665-022-07757-6 ↗
20. A. Karimi, A. Karimipour, M. Akbari, M. Mehdi Razzaghi, and M. JamaliGhahderijani, Investigating the Mechanical Properties and Fusion Zone Microstructure of Dissimilar Laser Weld Joint of Duplex 2205 Stainless Steel and A516 Carbon Steel, Opt. Laser Technol., 2023, 158, p 1–12.10.1016/j.optlastec.2022.108875 ↗
21. Z. Cai, F. Shen, Q. Chen, Z. Chen, Y. Cui, T. Shao, B. Dong, S. Lin, and X. Cai, Effect of Cold Metal Transfer Welding Repair Parameters on the Forming for the Repair of Surface Defects of Cast Magnesium Alloy, Crystals, 2024, 14(8), p 679.10.3390/cryst14080679 ↗
22. C. Zhang, M. Wu, J. Pu, Q. Shan, Y. Sun, S. Wang, and S.K.U.G. Hermann, Effect of Cu Coating on Microstructure and Properties of Al/Steel Welding-Brazing Joints Obtained by Cold Metal Transfer (CMT), Coatings, 2022, 12(8), p 1123.10.3390/coatings12081123 ↗
23. S. Niu, S. Chen, H. Dong, D. Zhao, X. Zhang, X. Guo, and G. Wang, Microstructure and Properties of Lap Joint Between Aluminum Alloy and Galvanized Steel by CMT, J. Mater. Eng. Perform., 2016, 25(5), p 1839–1847.10.1007/s11665-016-2035-2 ↗
24. M. Gao, C. Chen, S. Mei, L. Wang, and X. Zeng, Parameter Optimization and Mechanism of Laser-Arc Hybrid Welding of Dissimilar Al Alloy and Stainless Steel, Int. J. Adv. Manuf. Technol., 2014, 74(1–4), p 199–208.10.1007/s00170-014-5996-z ↗
25. J. Zhou, J. Shen, S. Hu, G. Zhao, and Q. Wang, Microstructure and Mechanical Properties of AISI 430 Ferritic Stainless Steel Joints Fabricated by Cold Metal Transfer Welding, Mater. Res. Express, 2019, 6(11), p 1–15.10.1088/2053-1591/ab4770 ↗
26. N. Manikandan and M. Arumugam, Optimizing Cold Metal Transfer-Wire Arc Additive Manufacturing Parameters for Enhanced Mechanical Properties and Microstructure of ER5356 Aluminum Alloy Using Artificial Neural Network and Response Surface Methodology, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-10403-y10.1007/s11665-024-10403-y ↗
27. P.N. Bellamkonda, R. Addanki, M. Sudersanan, B. Visvalingam, and M. Dwivedy, Optimization of Process Parameters of Cold Metal Transfer Arc Welding of AA 6061 Aluminium Alloy-AZ31B Magnesium Alloy Dissimilar Joints Using Response Surface Methodology, Int. J. Lightw. Mater. Manuf., 2024, 7(5), p 738–752. https://doi.org/10.1016/j.ijlmm.2024.05.00310.1016/j.ijlmm.2024.05.003 ↗
28. Y. Koli, S. Arora, S. Ahmad, S. Priya, N. Yuvaraj, and Z.A. Khan, Investigations and Multi-Response Optimization of Wire Arc Additive Manufacturing Cold Metal Transfer Process Parameters for Fabrication of SS308L Samples, J. Mater. Eng. Perform., 2023, 32(5), p 2463–2475. https://doi.org/10.1007/s11665-022-07282-610.1007/s11665-022-07282-6 ↗
29. S.K. Gupta, A.P. Patil, R.C. Rathod, A. Gupta, H. Methani, and V. Tandon, Cold Metal Transfer Welding of Ferritic and Austenitic Stainless Steel: Microstructural, Mechanical, and Electrochemical Studies, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-09743-610.1007/s11665-024-09743-6 ↗
30. S. Ambade, C. Tembhurkar, A. Rokde, S. Gupta, S. Shelare, C. Prakash, L.R. Gupta, and V.A. Smirnov, Experimental Investigation of Microstructural, Mechanical and Corrosion Properties of 316L and 202 Austenitic Stainless Steel Joints Using Cold Metal Transfer Welding, J. Mater. Res. Technol., 2023 https://doi.org/10.1016/j.jmrt.2023.11.09110.1016/j.jmrt.2023.11.091 ↗
31. A. Thirugnanasambandam, M.K. Subramaniyan, and V. Elumalai, Fabrication of Bimetallic Structure (SS 316L/SS 308L) via Wire + Arc Additive Manufacturing: A Detailed Characterization of Interface, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-10298-910.1007/s11665-024-10298-9 ↗
32. Y. Koli, N. Yuvaraj, and S. Aravindan, Enhancement of Mechanical Properties of 6061/6082 Dissimilar Aluminium Alloys Through Ultrasonic-Assisted Cold Metal Transfer Welding, Arab. J. Sci. Eng., 2021, 46(12), p 12089–12104. https://doi.org/10.1007/s13369-021-05844-910.1007/s13369-021-05844-9 ↗
33. P.V.S. Babu, S.K. Panigrahi, G.D. Janaki Ram, and R.S.K. Venkitakrishnan, Cold Metal Transfer Welding of Aluminium Alloy AA 2219 To Austenitic Stainless Steel AISI 321, J. Mater. Process. Technol., 2018, 266, p 155–164.10.1016/j.jmatprotec.2018.10.034 ↗
34. W. Xu, H. He, Y. Yi, H. Wang, C. Yu, and W. Fang, Dissimilar Joining of Stainless Steel and Aluminum Using Twin-Wire CMT, Weld. World, 2021, 65(8), p 1541–1551.10.1007/s40194-021-01089-0 ↗
35. Y. Koli, N. Yuvaraj, and S. Aravindan, CMT Joining of AA6061-T6 and AA6082-T6 and Examining Mechanical Properties and Microstructural Characterization, Trans. Indian Inst. Met., 2021, 74(2), p 313–329. https://doi.org/10.1007/s12666-020-02134-010.1007/s12666-020-02134-0 ↗
36. S. Saravanakumar, S. Sathiyamurthy, N. Ananthi, and P. Devi, Optimization of Drilling Characteristics of Al2O3 and Boiled Eggshell Filler-Added Hybrid Bio Composite from Agriculture Residue, Biomass Convers. Bioref., 2023 https://doi.org/10.1007/s13399-023-04572-410.1007/s13399-023-04572-4 ↗
37. S. Sathiyamurthy, S. Saravanakumar, N. Ananthi, and P. Devi, Optimization of Fiber Length and Filler Content for Improving the Mechanical Behaviour of Musa Acuminate Fiber-Reinforced Epoxy Composite Using Response Surface Methodology, J. Ceram. Process. Res., 2023, 24(4), p 683–692.
38. G. Periyappillai, S. Sathiyamurthy, and S. Saravanakumar, Optimized Machine Learning Prediction and RSM Optimization of Mechanical Properties in Boiled Eggshell Filler-Added Biocomposites, Fibers Polym., 2024, 25(8), p 3115–3133. https://doi.org/10.1007/s12221-024-00638-w10.1007/s12221-024-00638-w ↗
39. R. Ramprasath, S. Jayabal, and S. Sathiyamurthy, Optimization of Mechanical Behaviors of Red Mud Particulated Coir-Vinyl Ester Composites Using Intuitive Analysis Based on Response Surface Methodology and Simulated Annealing, Trans. Indian Inst. Met., 2014, 67(6), p 971–977.10.1007/s12666-014-0423-6 ↗
40. S. Saravanakumar, S. Sathiyamurthy, P. Pathmanaban, and P. Devi, Integrating Machine Learning and Response Surface Methodology for Analyzing Anisotropic Mechanical Properties of Biocomposites, Compos. Interfaces, 2024, 31(1), p 1–28. https://doi.org/10.1080/09276440.2023.226023910.1080/09276440.2023.2260239 ↗
41. V. Tandon, M.A. Thombre, A.P. Patil, R.V. Taiwade, and H. Vashishtha, Effect of Heat Input on the Microstructural, Mechanical, and Corrosion Properties of Dissimilar Weldment of Conventional Austenitic Stainless Steel and Low-Nickel Stainless Steel, Metallogr. Microstruct. Anal., 2020, 9(5), p 668–677. https://doi.org/10.1007/s13632-020-00681-y10.1007/s13632-020-00681-y ↗
42. J.G. Roy and N. Yuvaraj, Effect of Welding Parameters on Mechanical Properties of Cold Metal Transfer Welded Thin AISI 304 Stainless-Steel Sheets, Trans. Indian Inst. Met., 2021, 74(9), p 2397–2408. https://doi.org/10.1007/s12666-021-02326-210.1007/s12666-021-02326-2 ↗
43. M. Shojaati and B. Beidokhti, Characterization of AISI 304/AISI 409 Stainless Steel Joints Using Different Filler Materials, Constr. Build. Mater., 2017, 147, p 608–615.10.1016/j.conbuildmat.2017.04.185 ↗
44. J.G. Roy and N. Yuvaraj, Effect of Welding Parameters on Mechanical Properties of Cold Metal Transfer Welded Thin AISI 304 Stainless-Steel Sheets, Trans. Indian Inst. Met., 2021, 74(9), p 2397–2408.10.1007/s12666-021-02326-2 ↗
45. S. Sathiyamurthy, S. Saravanakumar, and V. Vinoth, Enhancing Tribological Performance of Hybrid Fiber-Reinforced Composites through Machine Learning and Response Surface Methodology, J. Reinf. Plast. Compos.Reinf. Plast. Compos., 2024 https://doi.org/10.1177/0731684424125642110.1177/07316844241256421 ↗
46. S. Sengottaiyan, S. Subbarayan, V. Viswanathan, and P. Pugazhendi, Optimized Machine Learning with Hyperparameter Tuning and Response Surface Methodology for Predicting Tribological Performance in Bio-Composite Materials, Polym. Compos.. Compos., 2024, 45, p 9421–9439.10.1002/pc.28418 ↗
47. V. Vinoth, S. Sathiyamurthy, S. Saravanakumar, and R. Senthilkumar, Integrating Response Surface Methodology and Machine Learning for Analyzing the Unconventional Machining Properties of Hybrid Fiber-Reinforced Composites, Polym. Compos., 2024, 45(7), p 6077–6092.10.1002/pc.28180 ↗
48. S. Saravanakumar, S. Sathiyamurthy, and V. Vinoth, Enhancing Machining Accuracy of Banana Fiber-Reinforced Composites with Ensemble Machine Learning, Meas. J. Int. Meas. Confed., 2024, 235, p 114912. https://doi.org/10.1016/j.measurement.2024.11491210.1016/j.measurement.2024.114912 ↗
49. B. VijayaRamnath, V.M. Manickavasagam, C. Elanchezhian, C. Vinodh Krishna, S. Karthik, and K. Saravanan, Determination of Mechanical Properties of Intra-Layer Abaca-Jute-Glass Fiber Reinforced Composite, Mater. Des., 2014, 60, p 643–652. https://doi.org/10.1016/j.matdes.2014.03.06110.1016/j.matdes.2014.03.061 ↗
50. M. Shamanian, M. Babajani, J. Kangazian, and J.A. Szpunar, Characterization of Microstructure, Microtexture, and Mechanical Response in UNS N08825 Superalloy/AISI 316L Stainless Steel Welds by Electron Backscatter Diffraction Analysis, J. Mater. Eng. Perform., 2021, 30(8), p 6009–6026.10.1007/s11665-021-05838-6 ↗
51. H. Khosrovaninezhad, M. Shamanian, A. Rezaeian, J. Kangazian, M. Nezakat, and J.A. Szpunar, Insight into the Effect of Weld Pitch on the Microstructure-Properties Relationships of St 37/AISI 316 Steels Dissimilar Welds Processed by Friction Stir Welding, Mater Charact, 2021, 177, p 111188.10.1016/j.matchar.2021.111188 ↗
52. J. Kangazian and M. Shamanian, Electron Back Scattered Diffraction Study of Dissimilar Welding Between the Super Duplex Stainless Steel and the Ni-Based Superalloy, Met. Mater. Int., 2019, 25(5), p 1287–1300.10.1007/s12540-019-00289-0 ↗
53. J. Verma, R.V. Taiwade, R. Kataria, and A. Kumar, Welding and Electrochemical Behavior of Ferritic AISI 430 and Austeno-Ferritic UNS 32205 Dissimilar Welds, J. Manuf. Process., 2018, 34, p 292–302. https://doi.org/10.1016/j.jmapro.2018.06.01910.1016/j.jmapro.2018.06.019 ↗