Wire Arc Additive Manufacturing (Metal Inert Gas-Cold Metal Transfer) of ER70S-6: Experimental and Computational Analysis on Process, Microstructure, and Mechanical Property Relationships
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. M. Abbaszadeh, J.R. Hönnige, F. Martina, L. Neto, N. Kashaev, P. Colegrove, S. Williams, and B. Klusemann, Numerical investigation of the effect of rolling on the localized stress and strain induction for wire + Arc additive manufactured structures, J. Mater. Eng. Perform., 2019, 28(8), p 4931–4942. https://doi.org/10.1007/s11665-019-04249-y10.1007/s11665-019-04249-y ↗
2. E. Aldalur, F. Veiga, A. Suárez, J. Bilbao, and A. Lamikiz, High deposition wire arc additive manufacturing of mild steel: strategies and heat input effect on microstructure and mechanical properties, J. Manuf. Process., 2020, 58, p 615–626. https://doi.org/10.1016/j.jmapro.2020.08.06010.1016/j.jmapro.2020.08.060 ↗
3. Bhadeshia, H. K. D. H.: 21—Physical Metallurgy of Steels. In D. E. Laughlin & K. Hono (Eds.), Physical Metallurgy (Fifth Edition) pp. 2157–2214. Elsevier (2014). https://doi.org/10.1016/B978-0-444-53770-6.00021-610.1016/B978-0-444-53770-6.00021-6 ↗
4. J. Bi, J. Chi, H. Song, H. Shao, K. Wang, Z. Yang, X. Jia, and G. Dong, Enhancing tensile properties of MIG welded AA6061 joints: effect of pulse mode and post-weld heat treatment, Mater. Today Commun., 2024, 39, p 109156. https://doi.org/10.1016/j.mtcomm.2024.10915610.1016/j.mtcomm.2024.109156 ↗
5. J. Chi, H. Shao, H. Song, X. Wang, K. Wu, Q. Zheng, M. Dmitrievich Starostenkov, G. Dong , and J. Bi, Effect of double-pulse frequency and post-weld heat treatment on microstructure and mechanical properties of metal-inert gas welded Al–Mg–Si alloy joints, Mater. Sci. Eng. A, 2024, 913, p 147029. https://doi.org/10.1016/j.msea.2024.14702910.1016/j.msea.2024.147029 ↗
6. CMT - The cold-welding process for premium quality. (n.d.). Retrieved May 30, 2024, from https://www.fronius.com/en/welding-technology/world-of-welding/fronius-welding-processes/cmt
7. C.R. Cunningham, J.M. Flynn, A. Shokrani, V. Dhokia , and S.T. Newman, Invited review article: strategies and processes for high quality wire arc additive manufacturing, Addit. Manuf., 2018, 22, p 672–686. https://doi.org/10.1016/j.addma.2018.06.02010.1016/j.addma.2018.06.020 ↗
8. E. Dogan, O. Yilmaz , and M. Mollamahmutoglu, Thermal behavior in wire arc additive manufacturing: a comparative study of the conventional process and infrared heater use, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-10441-610.1007/s11665-024-10441-6 ↗
9. W.E. Frazier, Metal additive manufacturing: a review, J. Mater. Eng. Perform., 2014, 23(6), p 1917–1928. https://doi.org/10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
10. J. Han, G. Dong, S. Li, J. Zheng, J. Wang, H. Li, M.D. Starostenkov , and J. Bi, Uneven distribution of cooling rate, microstructure and mechanical properties for A356–T6 wheels fabricated by low pressure die casting, J. Manuf. Process., 2024, 127, p 196–210. https://doi.org/10.1016/j.jmapro.2024.08.00110.1016/j.jmapro.2024.08.001 ↗
11. C. Huang, P. Kyvelou, R. Zhang, T.B. Britton , and L. Gardner, Mechanical testing and microstructural analysis of wire arc additively manufactured steels, Mater. Des., 2022, 216, p 110544. https://doi.org/10.1016/j.matdes.2022.11054410.1016/j.matdes.2022.110544 ↗
12. J.D. Hunt, Steady state columnar and equiaxed growth of dendrites and eutectic, Mater. Sci. Eng., 1984, 65(1), p 75–83. https://doi.org/10.1016/0025-5416(84)90201-510.1016/0025-5416(84)90201-5 ↗
13. D. Jafari, T.H.J. Vaneker , and I. Gibson, Wire and arc additive manufacturing: opportunities and challenges to control the quality and accuracy of manufactured parts, Mater. Des., 2021, 202, p 109471. https://doi.org/10.1016/j.matdes.2021.10947110.1016/j.matdes.2021.109471 ↗
14. F. Ji, Z. Hu, X. Qin, F. Yin, M. Ni , and X. Xiong, Grain refinement and mechanism of steel in ultrasound assisted wire and arc additive manufacturing, Int. Commun. Heat Mass Transfer, 2023, 143, p 106724. https://doi.org/10.1016/j.icheatmasstransfer.2023.10672410.1016/j.icheatmasstransfer.2023.106724 ↗
15. S. Kang, J.G. Speer, R.W. Regier, H. Nako, S.C. Kennett , and K.O. Findley, The analysis of bainitic ferrite microstructure in microalloyed plate steels through quantitative characterization of intervariant boundaries, Mater. Sci. Eng. A, 2016, 669, p 459–468. https://doi.org/10.1016/j.msea.2016.05.11110.1016/j.msea.2016.05.111 ↗
16. C. Körner, M. Markl , and J.A. Koepf, Modeling and simulation of microstructure evolution for additive manufacturing of metals: a critical review, Metall. and Mater. Trans. A., 2020, 51(10), p 4970–4983. https://doi.org/10.1007/s11661-020-05946-310.1007/s11661-020-05946-3 ↗
17. E. Kozeschnik , and J.M. Vitek, Ortho-equilibrium and para-equilibrium phase diagrams for interstitial / substitutional iron alloys, Calphad, 2000, 24(4), p 495–502. https://doi.org/10.1016/S0364-5916(01)00020-710.1016/S0364-5916(01)00020-7 ↗
18. W. Kurz, C. Bezençon , and M. Gäumann, Columnar to equiaxed transition in solidification processing, Sci. Technol. Adv. Mater., 2001, 2(1), p 185–191. https://doi.org/10.1016/S1468-6996(01)00047-X10.1016/S1468-6996(01)00047-X ↗
19. V.T. Le, T.L. Banh, D.T. Nguyen , and V.T. Le, Wire arc additive manufacturing of thin-wall low-carbon steel parts: microstructure and mechanical properties, Int. J. Modern Phys. B, 2020, 34(22n24), p 2040154. https://doi.org/10.1142/S021797922040154210.1142/S0217979220401542 ↗
20. J.G. Lopes, C.M. Machado, V.R. Duarte, T.A. Rodrigues, T.G. Santos , and J.P. Oliveira, Effect of milling parameters on HSLA steel parts produced by wire and arc additive manufacturing (WAAM), J. Manuf. Process., 2020, 59, p 739–749. https://doi.org/10.1016/j.jmapro.2020.10.00710.1016/j.jmapro.2020.10.007 ↗
21. MetalWorm Technology, Robotic Direct Energy Deposition System, DED. (n.d.). MetalWorm. Retrieved May 26, 2024, from https://www.metalworm.com/technology/
22. S. Nag, P. Sardar, A. Jain, A. Himanshu , and D.K. Mondal, Correlation between ferrite grain size, microstructure and tensile properties of 0.17 wt% carbon steel with traces of microalloying elements, Mater. Sci. Eng. A, 2014, 597, p 253–263. https://doi.org/10.1016/j.msea.2013.12.07310.1016/j.msea.2013.12.073 ↗
23. O. Panchenko, I. Kladov, D. Kurushkin, L. Zhabrev , and Ryl’kov, E., & Zamozdra, M., Effect of thermal history on microstructure evolution and mechanical properties in wire arc additive manufacturing of HSLA steel functionally graded components, Mater. Sci. Eng. A, 2022, 851, p 143569. https://doi.org/10.1016/j.msea.2022.14356910.1016/j.msea.2022.143569 ↗
24. M. Rafieazad, A.V. Nemani, M. Ghaffari , and A. Nasiri, On microstructure and mechanical properties of a low-carbon low-alloy steel block fabricated by wire arc additive manufacturing, J. Mater. Eng. Perform., 2021, 30(7), p 4937–4945. https://doi.org/10.1007/s11665-021-05568-910.1007/s11665-021-05568-9 ↗
25. T.A. Rodrigues, V. Duarte, J.A. Avila, T.G. Santos, R.M. Miranda , and J.P. Oliveira, Wire and arc additive manufacturing of HSLA steel: effect of thermal cycles on microstructure and mechanical properties, Addit. Manuf., 2019, 27, p 440–450. https://doi.org/10.1016/j.addma.2019.03.02910.1016/j.addma.2019.03.029 ↗
26. B. Shassere, A. Nycz, M. Noakes, C. Masuo , and N. Sridharan, Correlation of microstructure and mechanical properties of metal big area additive manufacturing, Appl. Sci., 2019, 9(4), p 787. https://doi.org/10.3390/app904078710.3390/app9040787 ↗
27. V. Shukla, V. Kumar , and A. Dixit, Microstructural characteristics and tensile properties of ER70S-6 manufactured by robotic CMT wire-and-arc additive manufacturing, Mater. Today: Proc., 2023 https://doi.org/10.1016/j.matpr.2023.02.01110.1016/j.matpr.2023.02.011 ↗
28. M. Srivastava, S. Rathee, A. Tiwari , and M. Dongre, Wire arc additive manufacturing of metals: a review on processes, materials and their behaviour, Mater. Chem. Phys., 2023, 294, p 126988. https://doi.org/10.1016/j.matchemphys.2022.12698810.1016/j.matchemphys.2022.126988 ↗
29. Standard Terminology for Additive Manufacturing Technologies. (n.d.). Retrieved July 15, 2024, from https://www.astm.org/f2792-12.html
30. C. Sudarsan, B.S. Katiyar, D.R. Behera, R. Rakshit, B. Rajak, A.K. Perka, K.S. Arora, S. Mandal , and S.K. Panda, Microstructural, mechanical, and corrosion performance of components fabricated through wire arc additive manufacturing process, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-08546-510.1007/s11665-023-08546-5 ↗
31. T. Tankova, D. Andrade, R. Branco, C. Zhu, D. Rodrigues , and L.S. da Silva, Characterization of robotized CMT-WAAM carbon steel, J. Constr. Steel Res., 2022, 199, p 107624. https://doi.org/10.1016/j.jcsr.2022.10762410.1016/j.jcsr.2022.107624 ↗
32. S.W. Thompson, D.J.V. Col and G. Krauss, Continuous cooling transformations and microstructures in a low-carbon, high-strength low-alloy plate steel, Metall. Trans. A, 1990, 21(6), p 1493–1507. https://doi.org/10.1007/BF0267256410.1007/BF02672564 ↗
33. TPS 320i, TPS 400i, TPS 500i, TPS 600i Operating Instructions. (n.d.). https://manuals.fronius.com/html/4204260114/en.html
34. K.E.K. Vimal, M.N. Srinivas , and S. Rajak, Wire arc additive manufacturing of aluminum alloys: a review, Mater. Today: Proc., 2021, 41, p 1139–1145. https://doi.org/10.1016/j.matpr.2020.09.15310.1016/j.matpr.2020.09.153 ↗
35. Voort, G. F. V. (1991). Atlas of Time-temperature Diagrams for Irons and Steels. In Atlas of Time Temperature Diagrams Series. ASM International. https://books.google.com.tr/books?id=xWGxHU_1XpUC
36. W.Y. Wang, J. Li, W. Liu , and Z.-K. Liu, Integrated computational materials engineering for advanced materials: a brief review, Comput. Mater. Sci., 2019, 158, p 42–48. https://doi.org/10.1016/j.commatsci.2018.11.00110.1016/j.commatsci.2018.11.001 ↗
37. S.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal , and P. Colegrove, Wire + arc additive manufacturing, Mater. Sci. Technol., 2016, 32(7), p 641–647. https://doi.org/10.1179/1743284715Y.000000007310.1179/1743284715Y.0000000073 ↗
38. A.S. Yildiz, B. Koc , and O. Yilmaz, Thermal behavior determination for wire arc additive manufacturing process, Procedia Manuf., 2021, 54, p 233–237. https://doi.org/10.1016/j.promfg.2021.07.03610.1016/j.promfg.2021.07.036 ↗