Machining Efficiency and Property Change Analysis of Ti-6Al-4V Alloy Processed by Abrasive Water Jet Machining

1. Y.W. Seo, M. Ramulu, and D. Kim, Machinability of Titanium Alloy (Ti-6Al-4V) by Abrasive Water-Jets, Proc. Inst. Mech. Eng. B J. Eng. Manuf., 2003, 217(12), p 1709–1721. https://doi.org/10.1243/09544050377268063110.1243/095440503772680631 ↗

2. M.C. Kong and D. Axinte, Response of Titanium Aluminide Alloy to Abrasive Water-Jet Cutting: Geometrical Accuracy And Surface Integrity Issues Versus Process Parameters, Proc. Inst. Mech. Eng. B J. Eng. Manuf., 2009, 223(1), p 19–42. https://doi.org/10.1243/09544054JEM122610.1243/09544054JEM1226 ↗

3. S. Tarek, G. Patrick, C. Guillaume, C. François, and R. Walter, Modeling Incision Profile in AWJM of Titanium Alloys Ti6Al4V, Mech. Ind., 2016, 17(4), p 403. https://doi.org/10.1051/MECA/201510210.1051/MECA/2015102 ↗

4. M. Hashish, Optimization Factors in Abrasive-Waterjet Machining, J. Ind. Eng. Int., 1991, 113(1), p 29–37. https://doi.org/10.1115/1.289961910.1115/1.2899619 ↗

5. M. Geetha, A.K. Singh, R. Asokamani, and A.K. Gogia, Ti Based Biomaterials, the Ultimate Choice for Orthopaedic Implants—A Review, Prog. Mater. Sci.. Mater. Sci., 2009, 54(3), p 397–425. https://doi.org/10.1016/j.pmatsci.2008.06.00410.1016/j.pmatsci.2008.06.004 ↗

6. X. Li, A. Shokrani, and S.T. Newman, A Review on the Machinability of Titanium Alloys for Aerospace Applications, Procedia CIRP, 2017, 62, p 760–765. https://doi.org/10.1016/j.procir.2016.06.06010.1016/j.procir.2016.06.060 ↗

7. A. Ducato, L. Fratini, M. La Cascia, G. Mazzola, An automated visual inspection system for the classification of the phases of Ti-6Al-4V titanium alloy, in Computer Analysis of Images and Patterns: 15th International Conference, CAIP 2013, York, UK, August 27-29, 2013, Proceedings, Part II 15 (Springer, Berlin, Heidelberg, 2013) pp. 362–369. https://doi.org/10.1007/978-3-642-40246-3_45.10.1007/978-3-642-40246-3_45 ↗

8. H. Iryna, K. Sylvia, H. Roman, and M. Jaromír, Analysis of the Effect of Heat Treatment and Corrosion Load on the Microstructure and Microhardness of the Ti6Al4V Alloy, Manufacturing Technology, 2022, 22(4), p 414–422. https://doi.org/10.21062/mft.2022.05810.21062/mft.2022.058 ↗

9. V. Schulze and A.R. Machado, Machining of Titanium Alloys: A Comprehensive Review, J. Manuf. Process., 2019, 46, p 1–34. https://doi.org/10.1016/j.jmapro.2019.06.01810.1016/j.jmapro.2019.06.018 ↗

10. E. Iakovou, E. Stavropoulos, and P. Bouzakis, Machining of Titanium Alloys: A Comprehensive Review, Procedia CIRP, 2019, 79, p 333–336. https://doi.org/10.1016/j.procir.2019.03.09810.1016/j.procir.2019.03.098 ↗

11. T. Tawakoli, A.F. Sadollah, and M. Sadegh, A Review on Abrasive Water Jet Machining and Conventional Mechanical Micro-Machining of Ti-6Al-4V Titanium Alloy, The Int. J. Adv. Manuf. Technol, 2019, 104(5–8), p 2221–2235. https://doi.org/10.1007/s00170-019-03757-610.1007/s00170-019-03757-6 ↗

12. H. Li and J. Wang, An Experimental Study of Abrasive Water-Jet Machining of Ti-6Al-4V, Int. J. Adv. Manuf. Technol., 2015, 81, p 361–369. https://doi.org/10.1007/s00170-015-7245-510.1007/s00170-015-7245-5 ↗

13. G. Jakub, M. Libor, P.P. Hlaváč, and G. Lucie, Analysis of Several Physical Phenomena Measured on the Metallic Materials Cut by Abrasive Water Jets (AWJ), Materials, 2022, 15(21), p 7423–7423. https://doi.org/10.3390/ma1521742310.3390/ma15217423 ↗

14. G. Fowler, P.H. Shipway, and I.R. Pashby, Abrasive Water-Jet Controlled Depth Milling of Ti6Al4V alloy—An Investigation of the Role of Jet–Workpiece Traverse Speed and Abrasive Grit Size on the Characteristics of the Milled Material, J. Mater. Process. Technol., 2005, 161(3), p 407–414. https://doi.org/10.1016/j.jmatprotec.2004.07.06910.1016/j.jmatprotec.2004.07.069 ↗

15. Y. Natarajan, K.L.N. Raj, and P. Tandon, Measurement and Analysis of Pocket Milling Features in Abrasive Water Jet Machining of Ti-6Al-4V alloy, Archiv. Civ. Mech. Eng, 2023, 23, p 42. https://doi.org/10.1007/s43452-022-00578-310.1007/s43452-022-00578-3 ↗

16. R. Kant and S.S. Dhami, Investigating Process Parameters of Abrasive Water Jet Machine Using EN31, Mater. Manuf. Processes, 2021, 36(14), p 1597–1603.10.1080/10426914.2021.1914849 ↗

17. Y. Yuan, J. Chen, and H. Gao, Surface Profile Evolution Model for Titanium Alloy Machined Using Abrasive Waterjet, Int. J. Mech. Sci., 2023, 240, 107911. https://doi.org/10.1016/j.ijmecsci.2022.10791110.1016/j.ijmecsci.2022.107911 ↗

18. A. Hascalik, U. Çaydaş, and H. Gürün, Effect of Traverse Speed on Abrasive Water-Jet Machining of Ti–6Al–4V Alloy, Mater. Des., 2007, 28(6), p 1953–1957. https://doi.org/10.1016/j.matdes.2006.04.02010.1016/j.matdes.2006.04.020 ↗

19. G. Fowler, I.R. Pashby, and P.H. Shipway, The Effect of Particle Hardness and Shape When Abrasive Water Jet Milling Titanium Alloy Ti-6Al-4V, Wear, 2009, 266(7), p 613–620. https://doi.org/10.1016/j.wear.2008.06.01310.1016/j.wear.2008.06.013 ↗

20. F. Boud, C. Carpenter, J. Folkes, and P.H. Shipway, Abrasive Water-Jet Cutting of a Titanium Alloy: The Influence of Abrasive Morphology and Mechanical Properties on Workpiece Grit Embedment and Cut Quality, J. Mater. Process. Technol., 2010, 210(15), p 2197–2205. https://doi.org/10.1016/j.jmatprotec.2010.08.00610.1016/j.jmatprotec.2010.08.006 ↗

21. N. Kumar and M. Shukla, Finite Element Analysis of Multi-Particle Impact on Erosion in Abrasive Water Jet Machining of Titanium Alloy, J. Comput. Appl. Math.Comput. Appl. Math., 2012, 236(18), p 4600–4610. https://doi.org/10.1016/j.cam.2012.04.02210.1016/j.cam.2012.04.022 ↗

22. M. Rajesh, K. Rajkumar, and V.E. Annamalai, Abrasive Water Jet Machining on Ti Metal-Interleaved Basalt-Flax Fibre Laminate, Mater. Manuf. Process., 2021, 36(3), p 329–340. https://doi.org/10.1080/10426914.2020.183269210.1080/10426914.2020.1832692 ↗

23. S. Chakraborty and A. Mitra, Parametric Optimization of Abrasive Water-Jet Machining Processes Using Grey Wolf Optimizer, Mater. Manuf. Process., 2018, 33(13), p 1471–1482. https://doi.org/10.1080/10426914.2018.145315810.1080/10426914.2018.1453158 ↗

24. K. Saravanan, M.P. Sudeshkumar, T. Maridurai, V. Suyamburajan, and V. Jayaseelan, Optimization of SiC Abrasive Parameters on Machining of Ti-6Al-4V Alloy in AJM Using Taguchi-Grey Relational Method, SILICON, 2021, 2021, p 1–8. https://doi.org/10.1007/s12633-020-00918-z10.1007/s12633-020-00918-z ↗

25. W. Fengchao, Y. Kaining, X. Nanzhe, L. Liucan, and G. Chuwen, Quantitative Analysis on the Surface Topography of Ti-6Al-4V Machined by Abrasive Suspension Jet, Int. J. Adv. Manuf. Technol., 2021, 112(1), p 323–332. https://doi.org/10.1007/s00170-020-06373-910.1007/s00170-020-06373-9 ↗

26. S. Vasanth, T. Muthuramalingam, P. Vinothkumar, T. Geethapriyan, G. Murali, Performance analysis of process parameters on machining titanium (Ti-6Al-4V) alloy using abrasive water jet machining process, 7th HPC Conference on High Performance Cutting (CIRP) (vol. 46, 2016), pp. 139–142. https://doi.org/10.1016/j.procir.2016.04.07210.1016/j.procir.2016.04.072 ↗

27. Z. Yue, C. Huang, H. Zhu, P. Yao, and Z. Liu, Material Removal Analysis in the Radial-Mode Abrasive Water-Jet Turning of Ceramic Materials, Int. J. Abras. Technol.Abras. Technol., 2014, 6(4), p 298–313. https://doi.org/10.1504/IJAT.2014.06583010.1504/IJAT.2014.065830 ↗

28. S. Kumar, S.K. Ghoshal, P.K. Arora, and L. Nagdeve, Multi-Variable Optimization in Die-Sinking EDM Process of AISI420 Stainless Steel, Mater. Manuf. Process., 2020, 2020, p 1–11. https://doi.org/10.1080/10426914.2020.184367810.1080/10426914.2020.1843678 ↗

29. S. Kumar, S.K. Ghoshal, and P.K. Arora, Optimization of Process Variables in Electric Discharge Machining (EDM) Using Taguchi Methodology, Indian J. Eng. Mater. Sci., 2021, 27(4), p 819–825.

30. S. Ramakrishnan, Investigation and Optimization of Drilled Surfaces Machined by Abrasive Water Jet Machining in Ti-6al-4V Alloy, Mater. Manuf. Process., 2023, 38(6), p 735–746. https://doi.org/10.1080/10426914.2022.213638210.1080/10426914.2022.2136382 ↗

31. M. Mieszala, P.L. Torrubia, D.A.J.J. Schwiedrzik, Y. Guo, S. Mischler, and L. Philippe, Erosion Mechanisms During Abrasive Water-Jet Machining: Model Microstructures and Single Particle Experiments, J. Mater. Process. Technol., 2017, 201(247), p 92–102. https://doi.org/10.1016/j.jmatprotec.2017.04.00310.1016/j.jmatprotec.2017.04.003 ↗

32. P. Liang, Y. Zhang, and Y. Xie, Chemical Composition and Genesis Implication of Garnet from the Laoshankou Fe-Cu-Au Deposit, the Northern Margin of East Junggar, NW, China, Minerals, 2021, 11, p 334. https://doi.org/10.3390/min1103033410.3390/min11030334 ↗

33. M. Soori and B. Arezoo, Minimization of Surface Roughness and Residual Stress in Abrasive Water Jet Cutting of Titanium Alloy Ti6Al4V, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. Part I Mech. Eng. C J. Mech., 2023, 1, p 341. https://doi.org/10.1177/0954408923115797210.1177/09544089231157972 ↗