Development and Mechanical Assessment of Friction Stir Additive Manufactured Al 6061/TiC/GS Composite

1. M. Maurya, K. Sudhir, and B. Vivek, Assessment of the Mechanical Properties of Aluminium Metal Matrix Composite: A Review, J. Reinf. Plast. Compos.Reinf. Plast. Compos., 2019, 38(6), p 267–298.10.1177/0731684418816379 ↗

2. M. Maurya, K. Sudhir, B. Vivek, and K.M. Nagendra, Process Parameters, Development and Applications of Stir Cast Composite: A Review, Mater. Test., 2020, 62(2), p 196–208.10.3139/120.111472 ↗

3. M. Maurya, A. Maurya, and S. Kumar, Variants of Friction Stir Based Processes: Review on Process Fundamentals, Material Attributes and Mechanical Properties, Mater. Test., 2024, 66(2), p 271–287. https://doi.org/10.1515/mt-2023-019610.1515/mt-2023-0196 ↗

4. A. Sahraei and S.E. Mirsalehi, An Investigation on Application of Friction Stir Additive Manufacturing (FSAM) for the Production of AA6061/TiC-Graphene Hybrid Nanocomposite in the Shape of Multi-layer Cylindrical Part, J. Mater. Res. Technol., 2024, 30, p 6737.10.1016/j.jmrt.2024.05.043 ↗

5. M. Maurya, A. Maurya, and S. Kumar, Solid State Additive Manufacturing: An Unconventional Technique to Fabricate Composite. In: S.K. Sethi, H.S. Gupta, A. Verma, (eds) Polymer Composites: From Computational to Experimental Aspects. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. (2024) https://doi.org/10.1007/978-981-97-0888-8_710.1007/978-981-97-0888-8_7 ↗

6. M. Maurya, A. Maurya, and S. Kumar, An Overview of Recent Development and Application of Friction Stir Processing Technique, Evergreen Joint J. Novel Carbon Resour. Sci. Green Asia Strategy, 2022, 09(03), p 814–829.

7. S. Kiani and S.E. Mirsalehi, Friction Stir Additive Manufacturing of B4C and Graphene Reinforced Aluminum Matrix Hybrid Nanocomposites Using Consumable Pins, J. Mater. Res. Technol., 2024, 28, p 1094–1110.10.1016/j.jmrt.2023.12.065 ↗

8. J. Yao, L. Chen, G. Dai, Y. Guo, W. Li, H. Chang, Z. Sun, and Zhou L, Microstructure Evolution and Mechanical Property Enhancement of Friction Stir Additive Manufactured Ti6Al4V Alloy, J. Alloys Compd., 2024, 987, p 174147.10.1016/j.jallcom.2024.174147 ↗

9. Dinesh Kumar, R., Balaji, B., and Balamurugan, K.G. (2022). Microstructural Characterization and Microhardness Investigations on Friction Stir Additive Manufactured Commercially Pure Aluminium Alloy. In: Natarajan, S.K., Prakash, R., Sankaranarayanasamy, K. (eds) Recent Advances in Manufacturing, Automation, Design and Energy Technologies. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-4222-7_2210.1007/978-981-16-4222-7_22 ↗

10. P. Maji, R.K. Nath, P. Paul, R.K. Bhogendro Meitei, and S.K. Ghosh, Effect of Processing Speed on Wear and Corrosion Behavior of Novel MoS2 and CeO2 Reinforced Hybrid Aluminum Matrix Composites Fabricated by Friction Stir Processing, J. Manuf. Process., 2021, 69, p 1–11.10.1016/j.jmapro.2021.07.032 ↗

11. S.K. Patel, V.P. Singh, B.S. Roy, and B. Kuriachen, Microstructural, Mechanical and Wear Behavior of A7075 Surface Composite Reinforced with WC and ZrSiO4 Nanoparticle Through Friction Stir Processing, J. Manuf. Process., 2021, 71, p 85–105.10.1016/j.jmapro.2021.09.010 ↗

12. T.M. Harish, S. Mathai, G. Danty, K. Govind, A. Ben, and E. Paul, Development of Al5056/Bagasse Ash/SiC Hybrid Surface Composite Through Friction Stir Processing, Mater. Today Proc., 2021, 47, p 5121–5124.10.1016/j.matpr.2021.05.306 ↗

13. Suman, S., Sethi, D., Meher, A., Bhargava, M., and Saha Roy, B. Effect of Tool Rotational Speed on Microstructure and Mechanical Properties of AA6061/SiC Surface Composites Using Friction Stir Processing. Mater. Today Proc. (2022).10.1016/j.matpr.2022.11.247 ↗

14. J. Luo, S. Liu, M. Paidar, R.V. Vignesh, and S. Mehrez, Enhanced Mechanical and Tribological Properties of AA6061/CeO2 Composite Fabricated by Friction Stir Processing, Mater. Lett., 2022, 318, p 132210.10.1016/j.matlet.2022.132210 ↗

15. M.M. Ahmed, M.M. Seleman, R.G. Eid, and M.F. Zawrah, Production of AA1050/Silica Fume Composite by Bobbin Tool-Friction Stir Processing: Microstructure, Composition and Mechanical Properties, CIRP J. Manuf. Sci. Technol., 2022, 38, p 801–812.10.1016/j.cirpj.2022.07.002 ↗

16. H. Venkit and S.K. Selvaraj, Novel Approach in Manufacturing Aluminum-Based Alternate Layered Composite Material via Friction Stir Additive Manufacturing Route, Mater. Today Commun., 2024, 38, p 107839.10.1016/j.mtcomm.2023.107839 ↗

17. A. Hassan, M. Awang, S.R. Pedapati, K. Altaf, R.V. Marode, and S.W. Ahmed, Experimental Investigation on Tool Pin Profile for Defect-Free Multi-Layered Laminates Using Friction Stir Additive Manufacturing, Results Eng., 2023, 20, p 101516.10.1016/j.rineng.2023.101516 ↗

18. H.A. Derazkola, F. Khodabakhshi, and A. Simchi, Evaluation of a Polymer-Steel Laminated Sheet Composite Structure Produced by Friction Stir Additive Manufacturing (FSAM) Technology, Polym. Test.. Test., 2020, 90, p 106690.10.1016/j.polymertesting.2020.106690 ↗

19. S.P. Dwivedi, M. Maurya, A. Saxena, and S. Sharma, Synthesis and Characterization of Spent Alumina Catalyst and Grinding Sludge Reinforced Aluminium-Based Composite Material, Proc. Instit. Mech. Eng. Part C J. Mech. Eng. Sci., 2022, 236(10), p 5523–5534.10.1177/09544062211061451 ↗

20. R. Prajapati, S. Dwivedi, D. Kumar et al., Investigation on Bonding Strength and Tribological Performances of Ceramic Laminated AA6063 Composite Developed by Friction Stir Additive Manufacturing, Int. J. Precis. Eng. Manuf. Green Tech., 2024, 11, p 89–105.10.1007/s40684-023-00545-0 ↗

21. A.R. Bhardwaj, A.M. Vaidya, P.D. Meshram et al., Machining Behavior Investigation of Aluminium Metal Matrix Composite Reinforced with TiC Particulates, Int. J. Interact. Des. Manuf., 2023 https://doi.org/10.1007/s12008-023-01378-610.1007/s12008-023-01378-6 ↗

22. S. Kumar, M. Maurya, T. Sharma et al., Optimization and ANFIS-Based Modeling of Two Step FSSW Process Parameters on Tensile Strength for Triple-Sheet Joining of Aluminum Alloy, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci., 2024, 238(7), p 2815–2830. https://doi.org/10.1177/0954406223120214310.1177/09544062231202143 ↗

23. D. Jeyasimman and R. Narayanasamy, Effects of a Coarse Grain Matrix Phase in AA 6061-Tic Nanocomposites on Microstructure, Cold Workability and Strain Hardening Behaviour, Int. J. Eng. Res. Technol., 2016, 5(1), p 508–515.

24. A.K. Srivastava, M. Maurya, A. Saxena, N.K. Maurya, S.P. Dwivedi, and A.R. Dixit, Microstructural and Fractographic Analysis of A359/Si3N4 Surface Composite Produced by Friction Stir Processing, Int. J. Mater. Res., 2021, 112(1), p 68–77. https://doi.org/10.1515/ijmr-2020-7827775310.1515/ijmr-2020-78277753 ↗

25. H.A. Murthy and S.K. Singh, Influence of TiC Particulate Reinforcement on the Corrosion Behaviour of Al 6061 Metal Matrix Composites, Adv. Mater. Lett., 2015, 6(7), p 633–640.10.5185/amlett.2015.5654 ↗

26. S.P. Dwivedi, N.K. Maurya, M. Maurya, A. Saxena, and A.K. Srivastava, Optimization of Casting Parameters for Improved Mechanical Properties of Eggshell Reinforced Composites, Mater. Test., 2021, 63(11), p 1041–1051. https://doi.org/10.1515/mt-2021-004410.1515/mt-2021-0044 ↗

27. S. Kumar, K. Kumar, M. Maurya, and Vishal, Parametric Optimization of Friction Stir Processing on Micro-hardness of Al/B4C Composite, Int. J. Mater. Res., 2021, 112(11), p 898–909. https://doi.org/10.1515/ijmr-2020-802710.1515/ijmr-2020-8027 ↗