Effect of Solution Heat Treatment on Corrosion Performance of Multi-pass Friction Stir Processed AA6061/Ceria-Stabilized Zirconia Composites for Marine Applications
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Y. Yan, G. Li, W. Ren, H. Wang, and L. Gao, Effects of Hot Rolling on Microstructure and Properties of FeCoNi1.5CrCu/2024Al Composites, J. Alloys Compd., 2022, 900, p 163393. https://doi.org/10.1016/j.jallcom.2021.16339310.1016/j.jallcom.2021.163393 ↗
2. R.V. Kumar, R. Keshavamurthy, C.S. Perugu, P.G. Koppad, and M. Alipour, Influence of Hot Rolling on Microstructure and Mechanical Behaviour of Al6061-ZrB2 in-situ Metal Matrix Composites, Mater. Sci. Eng. A, 2018, 738, p 344–352. https://doi.org/10.1016/j.msea.2018.09.10410.1016/j.msea.2018.09.104 ↗
3. C. Berlanga-Labari, M.V. Biezma-Moraleda, and P.J. Rivero, Corrosion of Cast Aluminum Alloys: A Review, Metals (Basel), 2020, 10, p 1–30. https://doi.org/10.3390/met1010138410.3390/met10101384 ↗
4. F. Toptan, A.C. Alves, I. Kerti, E. Ariza, and L.A. Rocha, Corrosion and Tribocorrosion Behaviour of Al-Si-Cu-Mg Alloy and its Composites Reinforced with B4C Particles in 0.05M NaCl Solution, Wear, 2013, 306, p 27–35. https://doi.org/10.1016/j.wear.2013.06.02610.1016/j.wear.2013.06.026 ↗
5. S. Roseline and V. Paramasivam, Corrosion Behaviour of Heat Treated Aluminium Metal Matrix Composites Reinforced with Fused Zirconia Alumina 40, J. Alloys Compd., 2019, 799, p 205–215. https://doi.org/10.1016/j.jallcom.2019.05.18510.1016/j.jallcom.2019.05.185 ↗
6. J. Fayomi, A.P.I. Popoola, O.M. Popoola, O.S.I. Fayomi, and E. Ajenifuja, Response Evaluation of AA8011 with Nano ZrB2 Inclusion for Multifunctional Applications: Considering its Thermal, Electrical, and Corrosion Properties, J. Alloys Compd., 2021, 853, p 157197. https://doi.org/10.1016/j.jallcom.2020.15719710.1016/j.jallcom.2020.157197 ↗
7. A. Kumar, K. Pal, and S. Mula, Simultaneous Improvement of Mechanical Strength, Ductility and Corrosion Resistance of Stir Cast Al7075-2% SiC Micro- and Nanocomposites by Friction Stir Processing, J. Manuf. Process., 2017, 30, p 1–13. https://doi.org/10.1016/j.jmapro.2017.09.00510.1016/j.jmapro.2017.09.005 ↗
8. A. Saxena, K.K. Saxena, V.K. Jain, S.K. Rajput, and B.N. Pathak, A Review of Reinforcements and Process Parameters for Powder Metallurgy-Processed Metal Matrix Composites, Mater. Today Proc., 2023 https://doi.org/10.1016/j.matpr.2023.02.22710.1016/j.matpr.2023.02.227 ↗
9. M.A. Khan, R. Butola, and N. Gupta, A Review of Nanoparticle Reinforced Surface Composites Processed by Friction Stir Processing, J. Adhes. Sci. Technol., 2023, 37, p 565–601. https://doi.org/10.1080/01694243.2022.203705410.1080/01694243.2022.2037054 ↗
10. W.H. El-Garaihy, D.M. Fouad, and H.G. Salem, Multi-channel Spiral Twist Extrusion (MCSTE): A Novel Severe Plastic Deformation Technique for Grain Refinement, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2018, 49, p 2854–2864. https://doi.org/10.1007/s11661-018-4621-410.1007/s11661-018-4621-4 ↗
11. Z.Y. Ma, Friction Stir Processing Technology: A Review, Metall. and Mater. Trans. A, 2008, 39(3), p 642–658. https://doi.org/10.1007/s11661-007-9459-010.1007/s11661-007-9459-0 ↗
12. S. Rathee, S. Maheshwari, and A.N. Siddiquee, Issues and Strategies in Composite Fabrication via Friction Stir Processing: A Review, Mater. Manuf. Processes, 2018, 33, p 239–261. https://doi.org/10.1080/10426914.2017.130316210.1080/10426914.2017.1303162 ↗
13. A. Heidarzadeh, S. Mironov, R. Kaibyshev, G. Çam, A. Simar, A. Gerlich, F. Khodabakhshi, A. Mostafaei, D.P. Field, J.D. Robson, A. Deschamps, and P.J. Withers, Friction Stir Welding/Processing of Metals and Alloys: A Comprehensive Review on Microstructural Evolution, Prog. Mater. Sci., 2021, 117, p 100752. https://doi.org/10.1016/j.pmatsci.2020.10075210.1016/j.pmatsci.2020.100752 ↗
14. M. Srivastava, S. Rathee, S. Maheshwari, and A.N. Siddiquee, Influence of Multiple-Passes on Microstructure and Mechanical Properties of Al-Mg/SiC Surface Composites Fabricated via Underwater Friction Stir Processing, Materials Research Express, 2018, 5(6), p 066511. https://doi.org/10.1088/2053-1591/aac70510.1088/2053-1591/aac705 ↗
15. V.A. Katkar, G. Gunasekaran, A.G. Rao and P.M. Koli, Effect of the Reinforced Boron Carbide Particulate Content of AA6061 Alloy on Formation of the Passive Film in Seawater, Corros. Sci., 2011, 53, p 2700–2712. https://doi.org/10.1016/j.corsci.2011.04.02310.1016/j.corsci.2011.04.023 ↗
16. H.C. Madhu, P. Ajay Kumar, C.S. Perugu, and S.V. Kailas, Microstructure and Mechanical Properties of Friction Stir Process Derived Al-TiO2 Nanocomposite, J. Mater. Eng. Perform., 2018, 27, p 1318–1326. https://doi.org/10.1007/s11665-018-3188-y10.1007/s11665-018-3188-y ↗
17. A. Kumar, D. Yadav, C.S. Perugu, and S.V. Kailas, Influence of Particulate Reinforcement on Microstructure Evolution and Tensile Properties of in-situ Polymer Derived MMC by Friction Stir Processing, Mater. Des., 2017, 113, p 99–108. https://doi.org/10.1016/j.matdes.2016.09.10110.1016/j.matdes.2016.09.101 ↗
18. R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. R. Rep., 2005, 50(1–2), p 1–78. https://doi.org/10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
19. D. Zhao, X. Yu, B. Yang, Y. Lu, and W. Xiu, Electrochemical Behavior and Microstructural Characterization of Nano-SiC Particles Reinforced Aluminum Matrix Composites Prepared via Friction Stir Processing, Ceram. Int., 2024, 50, p 35525–35536. https://doi.org/10.1016/j.ceramint.2024.06.36510.1016/j.ceramint.2024.06.365 ↗
20. H. Long Qin, H. Zhang, D. Tong Sun, and Q. Yu Zhuang, Corrosion Behavior of the Friction-Stir-Welded Joints of 2A14-T6 Aluminum Alloy, Int. J. Min. , Metall. Mater., 2015, 22, p 627–638. https://doi.org/10.1007/s12613-015-1116-910.1007/s12613-015-1116-9 ↗
21. S. Sinhmar and D.K. Dwivedi, Effect of Weld Thermal Cycle on Metallurgical and Corrosion Behavior of Friction Stir Weld Joint of AA2014 Aluminium Alloy, J. Manuf. Process., 2019, 37, p 305–320. https://doi.org/10.1016/j.jmapro.2018.12.00110.1016/j.jmapro.2018.12.001 ↗
22. H. Torbati-Sarraf, S.A. Torbati-Sarraf, N. Chawla, and A. Poursaee, A Comparative Study of Corrosion Behavior of an Additively Manufactured Al-6061 RAM2 with Extruded Al-6061 T6, Corros. Sci., 2020, 174, p 108838. https://doi.org/10.1016/j.corsci.2020.10883810.1016/j.corsci.2020.108838 ↗
23. Y. Peng, B. Huang, Y. Zhong, S. Changchao, Z. Tao, X. Rong, Z. Li, and H. Tang, Electrochemical Corrosion Behavior of 6061 Al Alloy Under High Rotating Speed Submerged Friction Stir Processing, Corros. Sci., 2023, 215, p 111029. https://doi.org/10.1016/j.corsci.2023.11102910.1016/j.corsci.2023.111029 ↗
24. M. Barati, M. Abbasi, and M. Abedini, The Effects of Friction Stir Processing and Friction Stir Vibration Processing on Mechanical, Wear and Corrosion Characteristics of Al6061/SiO2 Surface Composite, J. Manuf. Process., 2019, 45, p 491–497. https://doi.org/10.1016/j.jmapro.2019.07.03410.1016/j.jmapro.2019.07.034 ↗
25. K. El-Menshawy, A.W.A. El-Sayed, M.E. El-Bedawy, H.A. Ahmed, and S.M. El-Raghy, Effect of Aging Time at Low Aging Temperatures on the Corrosion of Aluminum Alloy 6061, Corros. Sci., 2012, 54, p 167–173. https://doi.org/10.1016/j.corsci.2011.09.01110.1016/j.corsci.2011.09.011 ↗
26. M.V.N.V. Satyanarayana, K. Adepu, and K. Chauhan, Effect of Overlapping Friction Stir Processing on Microstructure, Mechanical Properties and Corrosion Behavior of AA6061 Alloy, Met. Mater. Int., 2021, 27, p 3563–3573. https://doi.org/10.1007/s12540-020-00757-y10.1007/s12540-020-00757-y ↗
27. D. Priyasudana, S.A. Crisdion, P. Puspitasari, and D.D. Pramono, Double Side Friction Stir Welding Effect on Mechanical Properties and Corrosion Rate of Aluminum Alloy AA6061, Heliyon, 2023, 9, p e13366. https://doi.org/10.1016/j.heliyon.2023.e1336610.1016/j.heliyon.2023.e13366 ↗
28. V.P. Singh, D. Kumar, R.P. Mahto, and B. Kuriachen, Microstructural and Mechanical Behavior of Friction-Stir-Welded AA6061-T6 and AZ31 Alloys with Improved Electrochemical Corrosion, J. Mater. Eng. Perform., 2023, 32, p 4185–4204. https://doi.org/10.1007/s11665-022-07380-510.1007/s11665-022-07380-5 ↗
29. Y. Mazaheri, A. Heidarpour, M.M. Jalilvand, and M. Roknian, Effect of Friction Stir Processing on the Microhardness, Wear and Corrosion Behavior of Al6061 and Al6061/SiO2 Nanocomposites, J. Mater. Eng. Perform., 2019, 28, p 4826–4837. https://doi.org/10.1007/s11665-019-04260-310.1007/s11665-019-04260-3 ↗
30. B. Yelamasetti, P.N. Kumar, V. Ramana, G.K. Kumar Saxena, D. Singh, A.S. Kang, and K.A. Mohammed, Wear and Corrosion Behaviour of Multiple Pass Friction Stir Processing on Aluminium Alloy 6061 Embedding with B4C Particles, Adv. Mater. Process. Technol., 2024, 10, p 531–540. https://doi.org/10.1080/2374068X.2023.217166710.1080/2374068X.2023.2171667 ↗
31. D.S. Rao, N. Ramanaiah, Evaluation of Wear and Corrosion Properties of AA6061/TiB2 Composites Produced by FSP Technique, J. Miner. Mater. Charact. Eng., 2017, 05, p 353–361. https://doi.org/10.4236/jmmce.2017.5602910.4236/jmmce.2017.56029 ↗
32. S. Kumar, A. Kumar, C. Vanitha, ScienceDirect Corrosion behaviour of Al 7075 /TiC composites processed through friction stir processing, 2019. www.sciencedirect.com.10.1016/j.matpr.2019.05.019 ↗
33. M. Avadi Ammal, J. Sudha, R. Vaishnavi, and S.H. Vaishnavi, Effect of Aging Treatment on Friction Stir Processed Al-ZrO2-Graphene Nanoplatelet Surface Composite, J. Mater. Eng. Perform., 2023, 33, p 14071. https://doi.org/10.1007/s11665-023-08993-010.1007/s11665-023-08993-0 ↗
34. V. Shrivastava, G.K. Gupta, and I.B. Singh, Heat Treatment Effect on the Microstructure and Corrosion Behavior of Al-6061 Alloy with Influence of α-Nanoalumina Reinforcement in 3.5% NaCl Solution, J. Alloys Compd., 2019, 775, p 628–638. https://doi.org/10.1016/j.jallcom.2018.10.11110.1016/j.jallcom.2018.10.111 ↗
35. G. Manohar, A. Dey, K.M. Pandey, S.R. Maity, Fabrication of metal matrix composites by powder metallurgy: A review, in: AIP Conf Proc, American Institute of Physics Inc., 2018. https://doi.org/10.1063/1.5032003.10.1063/1.5032003 ↗
36. V. Sharma and P.K. Tripathi, Approaches to Measure Volume Fraction of Surface Composites Fabricated by Friction Stir Processing: A Review, Measurement, 2022, 193, p 110941. https://doi.org/10.1016/j.measurement.2022.11094110.1016/j.measurement.2022.110941 ↗
37. M. Patel, B. Chaudhary, J. Murugesan, N.K. Jain, and V. Patel, Enhancement of Tensile and Fatigue Properties of Hybrid Aluminium Matrix Composite via Multipass Friction Stir Processing, J. Market. Res., 2022, 21, p 4811–4823. https://doi.org/10.1016/j.jmrt.2022.11.07310.1016/j.jmrt.2022.11.073 ↗
38. S. Pan, J. Yuan, C. Linsley, J. Liu, and X. Li, Corrosion Behavior of Nano-Treated AA7075 Alloy with TiC and TiB2 Nanoparticles, Corros. Sci.. Sci., 2022 https://doi.org/10.1016/j.corsci.2022.11047910.1016/j.corsci.2022.110479 ↗
39. A. Vaško, V. Zatkalíková, M. Uhríčik, and V. Kaňa, Corrosion Resistance of Austenitic NiMn-Nodular Cast Iron in NaCl Solution, Arch. Metall. Mater., 2024, 69, p 1115–1122. https://doi.org/10.24425/amm.2024.15093210.24425/amm.2024.150932 ↗
40. L. Chen, L. Zhu, L. Lu, Z. Yang, X. Ren, and X. Zhang, The Effect of Heat Treatment on the Microstructure and Electrochemical Corrosion Behavior of Multilayer AA6061 Alloy Fabricated by Additive Friction Stir Deposition, Appl. Surf. Sci., 2024 https://doi.org/10.1016/j.apsusc.2023.15916710.1016/j.apsusc.2023.159167 ↗
41. T.J. Yoon, J.G. Yun, and C.Y. Kang, Formation Mechanism of Typical Onion Ring Structures and Void Defects in Friction Stir Lap Welded Dissimilar Aluminum Alloys, Mater. Des., 2016, 90, p 568–578. https://doi.org/10.1016/j.matdes.2015.11.01410.1016/j.matdes.2015.11.014 ↗
42. H.A. Deore, A. Bhardwaj, A.G. Rao, J. Mishra, and V.D. Hiwarkar, Consequence of Reinforced SiC Particles and Post Process Artificial Ageing on Microstructure and Mechanical Properties of Friction Stir Processed AA7075, Defence Technol., 2020, 16, p 1039–1050. https://doi.org/10.1016/j.dt.2019.12.00110.1016/j.dt.2019.12.001 ↗
43. M. Shahidi and M.R. Gholamhosseinzadeh, Electrochemical Evaluation of AA6061 Aluminum Alloy Corrosion in Citric Acid Solution Without and with Chloride Ions, J. Electroanal. Chem., 2015, 757, p 8–17. https://doi.org/10.1016/j.jelechem.2015.09.00310.1016/j.jelechem.2015.09.003 ↗
44. O. Jilani, N. Njah, and P. Ponthiaux, Corrosion Properties of Anodized Aluminum: Effects of Equal Channel Angular Pressing Prior to Anodization, Corros. Sci.. Sci., 2014, 89, p 163–170. https://doi.org/10.1016/j.corsci.2014.08.02010.1016/j.corsci.2014.08.020 ↗
45. I.H. Zainelabdeen, F.A. Al-Badour, R.K. Suleiman, A.Y. Adesina, N. Merah, and F.A. Ghaith, Influence of Friction Stir Surface Processing on the Corrosion Resistance of Al 6061, Materials, 2022 https://doi.org/10.3390/ma1522812410.3390/ma15228124 ↗
46. M. Qi, Y. Kang, Q. Qiu, W. Tang, J. Li, and B. Li, Microstructures, Mechanical Properties, and Corrosion Behavior of Novel High-Thermal-Conductivity Hypoeutectic Al-Si Alloys Prepared by Rheological High Pressure Die-Casting and High Pressure Die-Casting, J. Alloys Compd., 2018, 749, p 487–502. https://doi.org/10.1016/j.jallcom.2018.03.17810.1016/j.jallcom.2018.03.178 ↗
47. B. Bagheri, M. Abbasi, and M. Dadaei, Effect of Water Cooling and Vibration on the Performances of Friction-Stir-Welded AA5083 Aluminum Joints, Metall. Microstruct., and Anal., 2020, 9, p 33–46. https://doi.org/10.1007/s13632-019-00606-410.1007/s13632-019-00606-4 ↗
48. V. Shrivastava, A. Singh, and I.B. Singh, Effect of Sol–Gel Prepared Nanoalumina Reinforcement Content on the Corrosion Resistances of Al 6061-Al2O3 Nanocomposite in 3.5% NaCl Solution, Mater. Corros., 2017, 68, p 1099–1106. https://doi.org/10.1002/maco.20170946910.1002/maco.201709469 ↗
49. M. Rahsepar and H. Jarahimoghadam, The Influence of Multipass Friction Stir Processing on the Corrosion Behavior and Mechanical Properties of Zircon-Reinforced Al Metal Matrix Composites, Mater. Sci. Eng. A, 2016, 671, p 214–220. https://doi.org/10.1016/j.msea.2016.05.05610.1016/j.msea.2016.05.056 ↗
50. F. Gharavi, K.A. Matori, R. Yunus, N.K. Othman, and F. Fadaeifard, Corrosion Behavior of Al6061 Alloy Weldment Produced by Friction Stir Welding Process, J. Market. Res., 2015, 4, p 314–322. https://doi.org/10.1016/j.jmrt.2015.01.00710.1016/j.jmrt.2015.01.007 ↗