Wear and Friction Performance of Alumina-Reinforced Composite Coating on Ti-6Al-4V Alloy Produced by Combining Ultrasonic Impact Treatment and Air-Oxidation

1. X. Liu, P.K. Chu, and C. Ding, Surface Modification of Titanium, Titanium Alloys, and Related Materials for Biomedical Applications, Mater. Sci. Eng. R, 2004, 47, p 49–121. https://doi.org/10.1016/j.mser.2004.11.00110.1016/j.mser.2004.11.001 ↗

2. W. Liu, S. Liu, and L. Wang, Surface Modification of Biomedical Titanium Alloy: Micromorphology, Microstructure Evolution and Biomedical Applications, Coatings, 2020, 22, p 1901258. https://doi.org/10.3390/coatings904024910.3390/coatings9040249 ↗

3. Y. Sasikumar, K. Indira, and N. Rajendran, Surface Modification Methods for Titanium and is Alloys and Their Corrosion Behavior in Biological Environment: A Review, J. Bio- Tribo-Corros., 2019, 5, p 36. https://doi.org/10.1007/s40735-019-0229-510.1007/s40735-019-0229-5 ↗

4. Q. Wang, P. Zhou, S. Liu, S. Attarilar, R.L.-W. Ma, Y. Zhong, and L. Wang, Multi-Scale Surface Treatments of Titanium Implants for Rapid Osseointegration: A Review, Nanomaterials, 2020, 10, p 1244. https://doi.org/10.3390/nano1006124410.3390/nano10061244 ↗

5. S. Yadav, A. Kumar, T. Paramesh, and K. Sunita, A Review on Enhancement of Wear Resistance Properties of Titanium Alloy Using Nano-Composite Coating, IOP Conf Series: Mater. Sci. Eng., 2018, 455, 012120. https://doi.org/10.1088/1757-899X/455/1/01212010.1088/1757-899X/455/1/012120 ↗

6. A. Revathi, S. Magesh, V.K. Balla, M. Das, and G. Manivasagam, Current Advances in Enhancement of Wear and Corrosion Resistance of Titanium Alloys—A Review, Mater. Technol., 2016, 31, p 696–704. https://doi.org/10.1080/10667857.2016.121278010.1080/10667857.2016.1212780 ↗

7. S. Kaur, K. Ghadirinejadm, and R.H. Oskouei, An Overview on the Tribological Performance of Titanium Alloys with Surface Modifications for Biomedical Applications, Lubricants, 2019, 7, p 65. https://doi.org/10.3390/lubricants708006510.3390/lubricants7080065 ↗

8. Y.S. Tian, C.Z. Chen, D.Y. Wang, and T.Q. Lei, Laser Surface Modification of Titanium Alloys—A Review, Surf. Rev. Lett., 2005, 12, p 123–130. https://doi.org/10.1142/S0218625X0500686X10.1142/S0218625X0500686X ↗

9. A. Amanov, I.S. Cho, D.E. Kim, and Y.S. Pyun, Fretting Wear and Friction Reduction of CP Titanium and Ti-6Al-4V Alloy by Ultrasonic Nanocrystalline Surface Modification, Surf. Coat. Technol., 2012, 207, p 135–142. https://doi.org/10.1016/j.surfcoat.2012.06.04610.1016/j.surfcoat.2012.06.046 ↗

10. E. Maawad, H.-G. Brokmeier, L. Wagner, Y. Sano, and Ch. Genzel, Investigation on the surface and near-surface characteristics of Ti-2.5Cu after various mechanical surface treatments, Surf. Coat. Technol., 2011, 205, p 3644–3650. https://doi.org/10.1016/j.surfcoat.2011.01.00110.1016/j.surfcoat.2011.01.001 ↗

11. A.K. Gujba and M. Medraj, Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening, Materials, 2014, 7, p 7925. https://doi.org/10.3390/ma712792510.3390/ma7127925 ↗

12. R. Sonntag, J. Reinders, J. Gibmeier, and J.P. Kretzer, Fatigue Performance of Medical Ti6Al4V Alloy After Mechanical Surface Treatments, PLoS ONE, 2015, 10, e0121963. https://doi.org/10.1371/journal.pone.012196310.1371/journal.pone.0121963 ↗

13. M. Kheradmandfard, S.F. Kashani-Bozorg, C.-L. Kim, A.Z. Hanzaki, Y.-S. Pyoun, J.-H. Kim, A. Amanov , and D.-E. Kim, Nanostructured β-Type Titanium Alloy Fabricated by Ultrasonic Nanocrystal Surface Modification, Ultrason. Sonochem., 2017, 37, p 698–706. https://doi.org/10.1016/j.ultsonch.2017.03.06110.1016/j.ultsonch.2017.03.061 ↗

14. A.T. Bozdana, N.N.Z. Gindy , and H. Li, Deep Cold Rolling with Ultrasonic Vibrations—A New Mechanical Surface Enhancement Technique, Int. J. Mach. Tools Manuf, 2005, 45, p 713–718. https://doi.org/10.1016/j.ijmachtools.2004.09.01710.1016/j.ijmachtools.2004.09.017 ↗

15. M.A. Vasylyev, S.P. Chenakin, and L.F. Yatsenko, Ultrasonic Impact Treatment Induced Oxidation of Ti6Al4V Alloy, Acta Mater., 2016, 103, p 761–774. https://doi.org/10.1016/j.actamat.2015.10.04110.1016/j.actamat.2015.10.041 ↗

16. O. Takakuwa, M. Nakai, K. Narita, M. Niinomi, K. Hasegawa, and H. Soyama, Enhancing the Durability of Spinal Implant Fixture Applications Made of Ti-6Al-4V ELI by Means of Cavitation Peening, Int. J. Fatigue, 2016, 92, p 360–367. https://doi.org/10.1016/j.ijfatigue.2016.07.02110.1016/j.ijfatigue.2016.07.021 ↗

17. I. Altenberger, R.K. Nalla, Y. Sano, L. Wagner, and R.O. Ritchie, On the Effect of Deep-Rolling and Laser-Peening on the Stress-Controlled Low- and High-Cycle Fatigue Behavior of Ti–6Al–4V at Elevated Temperatures up to 550 °C, Int. J. Fatigue, 2012, 44, p 292–302. https://doi.org/10.1016/j.ijfatigue.2012.03.00810.1016/j.ijfatigue.2012.03.008 ↗

18. L.Q. Wang, L. Xie, P.Q. Shen, Q. Fan, W. Wang, K. Wang, W.J. Lu, L. Hua, and L.C. Zhang, Surface Microstructure and Mechanical Properties of Ti-6Al-4V/Ag Nanocomposite Prepared by FSP, Mater. Charact., 2019, 153, p 175–183. https://doi.org/10.1016/j.matchar.2019.05.00210.1016/j.matchar.2019.05.002 ↗

19. K. Qiao, T. Zhang, K. Wang, S. Yuan, L.Q. Wang, S.Y. Chen, Y.H. Wang, K.R. Xue, and W. Wang, Effect of Multi-Pass Friction Stir Processing on the Microstructure Evolution and Corrosion behavior of ZrO2/AZ31 Magnesium Matrix Composite, J. Mater. Res. Technol., 2022, 18, p 1166–1179. https://doi.org/10.1016/j.jmrt.2022.02.12710.1016/j.jmrt.2022.02.127 ↗

20. G.D. Revankar, R. Shetty, S.S. Rao, and V.N. Gaitonde, Wear Resistance Enhancement of Titanium Alloy (Ti–6Al–4V) by Ball Burnishing Process, J. Mater. Res. Technol., 2017, 6(1), p 13–32. https://doi.org/10.1016/j.jmrt.2016.03.00710.1016/j.jmrt.2016.03.007 ↗

21. A. Fischer, W. Dudzinski, B. Gleising, and P. Stemmer, Advanced Analytical Methods in Tribology, Springer, Cham, 2018, p 29–59. https://doi.org/10.1007/978-3-319-99897-8_210.1007/978-3-319-99897-8_2 ↗

22. K.K. Liu and M.R. Hill, The Effects of Laser Peening and Shot Peening on Fretting Fatigue in Ti-6Al-4V Coupons, Tribol. Int., 2009, 42, p 1250–1262. https://doi.org/10.1016/j.triboint.2009.04.00510.1016/j.triboint.2009.04.005 ↗

23. B.N. Mordyuk and G.I. Prokopenko, Fatigue Life Improvement of α-Titanium by Novel Ultrasonically Assisted Technique, Mater. Sci. Eng. A, 2006, 437, p 396–405. https://doi.org/10.1016/j.msea.2006.07.11910.1016/j.msea.2006.07.119 ↗

24. B. Li, Y. Shen, L. Luo, and W. Hu, Fabrication of TiCp/Ti–6Al–4V Surface Composite Via Friction Stir Processing (FSP): Process Optimization, Particle Dispersion-Refinement Behavior and Hardening Mechanism, Mater. Sci. Eng. A, 2013, 574, p 75–85. https://doi.org/10.1016/j.msea.2013.03.01910.1016/j.msea.2013.03.019 ↗

25. M. Kawasaki and T.G. Langdon, Using Severe Plastic Deformation to Fabricate Strong Metal Matrix Composites, Mater. Res., 2017, 20, p 46–52. https://doi.org/10.1590/1980-5373-MR-2017-021810.1590/1980-5373-MR-2017-0218 ↗

26. K. Holmberg, H. Ronkainen, A. Laukkanen, and K. Wallin, Friction and Wear of Coated Surfaces—Scales, Modelling and Simulation Of Tribomechanisms, Surf. Coat. Technol., 2007, 202, p 1034–1049. https://doi.org/10.1016/j.surfcoat.2007.07.10510.1016/j.surfcoat.2007.07.105 ↗

27. S. Sobieszczyk, Surface Modifications of Ti and Its Alloys, Adv. Mater. Sci., 2010, 10, p 29–42. https://doi.org/10.2478/v10077-010-0003-310.2478/v10077-010-0003-3 ↗

28. L.-C. Zhang, L.-Y. Chen, and L. Wang, Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests, Adv. Eng. Mater., 2020, 22, p 1901258. https://doi.org/10.1002/adem.20190125810.1002/adem.201901258 ↗

29. J.J. Candela and V. Amigo, Recent Advances in Laser Surface Treatment of Titanium Alloys, Adv. J. Laser Appl., 2011, 23, p 022005. https://doi.org/10.2478/v10077-010-0003-310.2478/v10077-010-0003-3 ↗

30. R.C. Rocha, A. Gustavo de Sousa Galdino, S. Nicodemos da Silva, and M.L.P. Machado, Surface, Microstructural, and Adhesion Strength Investigations of a Bioactive Hydroxyapatite-Titanium Oxide Ceramic Coating Applied to Ti-6Al-4V Alloys by Plasma Thermal Spraying, Mater. Res., 2018, 21, p e20171144. https://doi.org/10.1590/1980-5373-MR-2017-114410.1590/1980-5373-MR-2017-1144 ↗

31. Z. Rahman, I. Shabib, and W. Haider, Surface Characterization and Cytotoxicity Analysis of Plasma Sprayed Coatings on Titanium Alloys, Mater. Sci. Eng. C, 2016, 67, p 675–683. https://doi.org/10.1016/j.msec.2016.05.07010.1016/j.msec.2016.05.070 ↗

32. J. Cai, X. Wang, W. Bai, X. Zhao, T. Wang, and J. Tu, Bias-Graded Deposition and Tribological Properties of Ti-Contained a-C Gradient Composite Film on Ti6Al4V Alloy, Appl. Surf. Sci., 2013, 279, p 450–457. https://doi.org/10.1016/j.apsusc.2013.04.13610.1016/j.apsusc.2013.04.136 ↗

33. D. Ma, T.J. Harvey, R.G. Wellman, A.P. Ehiasarian, PEh. Hovsepian, A.A. Sugumaran, Y.P. Purandare, and R.J.K. Wood, Cavitation Erosion Performance of CrAlYN/CrN Nanoscale Multilayer Coatings Deposited on Ti6Al4V by HIPIMS, J. Alloys Compd., 2019, 788, p 719–728. https://doi.org/10.1016/j.jallcom.2019.02.23810.1016/j.jallcom.2019.02.238 ↗

34. C.-W. Chan, S. Lee, G. Smith, G. Sarri, C.-H. Ng, A. Sharba, and H.-C. Man, Enhancement of Wear and Corrosion Resistance of Beta Titanium Alloy by Laser Gas Alloying with Nitrogen, Appl. Surf. Sci., 2016, 367, p 80–90. https://doi.org/10.1016/j.apsusc.2016.01.09110.1016/j.apsusc.2016.01.091 ↗

35. Q. Wang, P.Z. Zhang, D.B. Wei, X.H. Chen, R.N. Wang, H.Y. Wang, and K.T. Feng, Microstructure and Sliding Wear Behavior of Pure Titanium Surface Modified by Double-Glow Plasma Surface Alloying with Nb, Mater. Design., 2013, 52, p 265–273. https://doi.org/10.1016/j.matdes.2013.05.06110.1016/j.matdes.2013.05.061 ↗

36. V.G. Efremenko, Y.G. Chabak, K. Shimizu, A.G. Lekatou, V.I. Zurnadzhy, A.E. Karantzalis, H. Halfa, V.A. Mazur, and B.V. Efremenko, Structure Refinement of High-Cr Cast Iron by Plasma Surface Melting and Post-Heat Treatment, Mater. Design, 2017, 126, p 278–290. https://doi.org/10.1016/j.matdes.2017.04.02210.1016/j.matdes.2017.04.022 ↗

37. J. Wang, C. Li, M. Zeng, Y. Guo, X. Feng, L. Tang, and Y. Wang, Microstructural Evolution and Wear Behaviors of NbC-Reinforced Ti-Based Composite Coating, Int. J. Adv. Manuf. Technol., 2020, 107, p 2397–2407. https://doi.org/10.1007/s00170-020-05198-w10.1007/s00170-020-05198-w ↗

38. O.O. Goncharuk, R.O. Zhuk, O.D. Kaglyak, V.V. Dzhemelinskyi, and D.A. Lesyk, Laser Sintering of Abrasive Layers with Inclusions of Cubic Boron Nitride Grains, Lasers Manuf. Mater. Process., 2018, 5, p 298–316. https://doi.org/10.1007/s40516-018-0068-010.1007/s40516-018-0068-0 ↗

39. S. Datta, M. Das, V.K. Balla, S. Bodhak, and V. Murugesan, Mechanical, Wear, Corrosion and Biological Properties of Arc Deposited Titanium Nitride Coatings, Surf. Coat. Technol., 2018, 344, p 214–222. https://doi.org/10.1016/j.surfcoat.2018.03.01910.1016/j.surfcoat.2018.03.019 ↗

40. D.T. Waghmare, C.K. Padhee, R. Prasad, and M. Masanta, NiTi Coating on Ti-6Al-4V Alloy by TIG Cladding Process for Improvement of Wear Resistance: Microstructure Evolution and Mechanical Performances, J. Mater. Process. Technol., 2018, 262, p 551–561. https://doi.org/10.1016/j.jmatprotec.2018.07.03310.1016/j.jmatprotec.2018.07.033 ↗

41. D. Yonekura, J. Fujita, and K. Miki, Fatigue and Wear Properties of Ti-6Al-4V Alloy with Cr/CrN Multilayer Coating, Surf. Coat. Technol., 2015, 275, p 232–238. https://doi.org/10.1016/j.surfcoat.2015.05.01410.1016/j.surfcoat.2015.05.014 ↗

42. N.S. Mashovets, I.M. Pastukh, and S.M. Voloshko, Aspects of the Practical Application of Titanium Alloys After Low Temperature Nitriding Glow Discharge in Hydrogen-Free Gas Media, Appl. Surf. Sci., 2017, 392, p 356–361. https://doi.org/10.1016/j.apsusc.2016.08.18010.1016/j.apsusc.2016.08.180 ↗

43. Y. Chen, T. Cheng, and X. Nie, Wear Failure Behaviour of Titanium-Based Oxide Coatings on a Titanium Alloy Under Impact and Sliding Forces, J. Alloys Compd., 2013, 578, p 336–444. https://doi.org/10.1016/j.jallcom.2013.05.19910.1016/j.jallcom.2013.05.199 ↗

44. L. Ceschini, E. Lanzoni, C. Martini, D. Prandstraller, and G. Sambogna, Comparison of Dry Sliding Friction and Wear of Ti6Al4V Alloy Treated by Plasma Electrolytic Oxidation and PVD Coating, Mater. Lett., 2008, 264, p 86–95. https://doi.org/10.1016/j.wear.2007.01.04510.1016/j.wear.2007.01.045 ↗

45. X. Li, C. Dong, Q. Zhao, Y. Pang, F. Cheng, and S. Wang, Characterization of Microstructure and Wear Resistance of PEO Coatings Containing Various Microparticles on Ti6Al4V Alloy, J. Mater. Eng. Perform., 2018, 27, p 1642–1653. https://doi.org/10.1007/s11665-018-3249-210.1007/s11665-018-3249-2 ↗

46. R. Gaddam, B. Sefer, R. Pederson, and M.-L. Antti, Study of Alpha-Case Depth in Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-4V, IOP Conf. Series: Mater. Sci. Eng., 2013, 48, 012002. https://doi.org/10.1088/1757-899X/48/1/01200210.1088/1757-899X/48/1/012002 ↗

47. N. Dalili, A. Edrisy, K. Farokhzadeh, J. Li, J. Lo, and A.R. Riahi, Improving the Wear Resistance of Ti-6Al–4V/TiC Composites Through Thermal Oxidation (TO), Wear, 2010, 269, p 590–601. https://doi.org/10.1016/j.wear.2010.06.00610.1016/j.wear.2010.06.006 ↗

48. F. Borgioli, E. Galvanetto, F. Iozzelli, and G. Pradelli, Improvement of Wear Resistance of Ti-6Al-4V Alloy by Means of Thermal Oxidation, Mater. Lett., 2005, 59, p 2159–2162. https://doi.org/10.1016/j.matlet.2005.02.05410.1016/j.matlet.2005.02.054 ↗

49. M. Lou and A.T. Alpas, High Temperature Wear Mechanisms in Thermally Oxidized Titanium Alloys for Engine Valve Applications, Wear, 2019, 426–427, p 443–453. https://doi.org/10.1016/j.wear.2018.12.04110.1016/j.wear.2018.12.041 ↗

50. H. Dong and T. Bell, Enhanced Wear Resistance of Titanium Surfaces by a New Thermal Oxidation Treatment, Wear, 2000, 238, p 131–137. https://doi.org/10.1016/S0043-1648(99)00359-210.1016/S0043-1648(99)00359-2 ↗

51. K. Aniolek, M. Kupka, and A. Barylski, Sliding Wear Resistance of Oxide Layers Formed on a Titanium Surface During Thermal Oxidation, Wear, 2016, 356–357, p 23–29. https://doi.org/10.1016/j.wear.2016.03.00710.1016/j.wear.2016.03.007 ↗

52. F. Borgioli, E. Galvanetto, F. Iozzelli, and G. Pradelli, Improvement of Wear Resistance of Ti-6Al-4V Alloy by Means of Thermal Oxidation, Mater. Lett., 2005, 59, p 2159–2162. https://doi.org/10.1016/j.matlet.2005.02.05410.1016/j.matlet.2005.02.054 ↗

53. D. Cetiner, A.H. Paksoy, O. Tazegul, E. Atar, and H. Cimenoglu, Characterization of Thermally Oxidized Titanium Based Coating, J. Ach. Mater. Manuf. Eng., 2016, 2, p 49–54. https://doi.org/10.5604/17348412.122837410.5604/17348412.1228374 ↗

54. H. Güleryüz and H. Çimenoğlu, Effect of Thermal Oxidation on Corrosion and Corrosion–Wear Behaviour of a Ti-6Al4V Alloy, Biomaterials, 2004, 25, p 3325–3333. https://doi.org/10.1016/j.biomaterials.2003.10.00910.1016/j.biomaterials.2003.10.009 ↗

55. S. Wang, Z. Liao, Y. Liu, and W. Liu, Influence of Thermal Oxidation Temperature on the Microstructural and Tribological Behavior of Ti6Al4V Alloy, Surf. Coat. Technol., 2014, 240, p 470–477. https://doi.org/10.1016/j.surfcoat.2014.01.00410.1016/j.surfcoat.2014.01.004 ↗

56. A. Saier, I. Esen, H. Ahlatci, and E. Keskin, Effect of Oxidation Process on Mechanical and Tribological Behaviour of Titanium Grade 5 Alloy, Materials, 2024, 17, p 776. https://doi.org/10.3390/ma1704077610.3390/ma17040776 ↗

57. Y. Sun, R. Bailey, J. Zhang, Y. Lian, and X.L. Ji, Effect of Thermal Oxidation on the dry Sliding Friction and Wear Behaviour of CP-Ti on CP-Ti Tribopairs, Surf. Sci. Technol., 2023, 1, p 15. https://doi.org/10.1007/s44251-023-00015-410.1007/s44251-023-00015-4 ↗

58. B.N. Mordyuk, S.M. Voloshko, V.I. Zakiev, A.P. Burmak, and V.V. Mohylko, Enhanced Resistance of Ti6Al4V Alloy to High-Temperature Oxidation and Corrosion by Forming Alumina Composite Coating, J. Mater. Eng. Perform., 2021, 30, p 1780–1795. https://doi.org/10.1007/s11665-021-05492-y10.1007/s11665-021-05492-y ↗

59. H. Özkan Gülsoy, S. Özbey, S. Pazarlioglu, M. Çiftci, and H. Akyurt, Sintering and Mechanical Properties of Titanium Composites Reinforced Nano Sized Al2O3 Particles, Int. J. Mater. Mech. Manufact., 2016, 4, p 111–114. https://doi.org/10.7763/IJMMM.2016.V4.23510.7763/IJMMM.2016.V4.235 ↗

60. B.N. Mordyuk, S.M. Voloshko, A.P. Burmak, V.V. Mohylko, and M.M. Voron, Synthesis of Composite Coatings by Ultrasonic Impact Treatment of VT6 Titanium Alloy, Metallofiz. Noveishie Tekhnol., 2019, 41, p 1067–1086. https://doi.org/10.15407/mfint.41.08.1067. (in Ukrainian)10.15407/mfint.41.08.1067 ↗

61. V.V. Mohylko, A.P. Burmak, M.M. Voron, I.A. Vladymyrskyi, S.I. Sidorenko, S.M. Voloshko, and B.N. Mordyuk, Enhancement of Heat Resistance of Ti6Al4V Titanium Alloy by Formation of Oxide Composite Layers Using Ultrasonic Impact Treatment, Metallofiz. Noveishie Tekhnol., 2018, 40, p 1521–1537. https://doi.org/10.15407/mfint.40.11.1521. (in Ukrainian)10.15407/mfint.40.11.1521 ↗

62. G.A. Gogotsi, Fracture Toughness of Ceramics and Ceramic Composites, Ceram. Int., 2003, 29, p 777–784. https://doi.org/10.1016/S0272-8842(02)002310.1016/S0272-8842(02)0023 ↗

63. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz, G.I. Prokopenko, Yu.V. Milman, and K.E. Grinkevych, Microstructure Related Enhancement in Wear Resistance of Tool Steel AISI D2 by Applying Laser Heat Treatment Followed by Ultrasonic Impact Treatment, Surf. Coat. Technol., 2017, 328, p 344–354. https://doi.org/10.1016/j.surfcoat.2017.08.04510.1016/j.surfcoat.2017.08.045 ↗

64. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz, G.I. Prokopenko, M.O. Iefimov, and K.E. Grinkevych, Combining Laser Transformation Hardening and Ultrasonic Impact Strain Hardening for Enhanced Wear Resistance of AISI 1045 Steel, Wear, 2020, 462–463, 203494. https://doi.org/10.1016/j.wear.2020.20349410.1016/j.wear.2020.203494 ↗

65. B.N. Mordyuk, G.I. Prokopenko, Yu.V. Milman, M.O. Iefimov, K.E. Grinkevych, A.V. Sameljuk, and I.V. Tkachenko, Wear Assessment of Composite Surface Layers in Al-6Mg Alloy Reinforced with AlCuFe Quasicrystalline Particles: Effects of Particle Size, Microstructure and Hardness, Wear, 2014, 319, p 84–95. https://doi.org/10.1016/j.wear.2014.07.01110.1016/j.wear.2014.07.011 ↗

66. V. Zakiev, A. Markovsky, E. Aznakayev, I. Zakiev, E. Gursky, Micro-mechanical properties of biomaterials. Proc SPIE 5959, Congress on Optics and Optoelectronics, Warsaw, Poland, 23 September 2005. https://doi.org/10.1117/12.62839610.1117/12.628396 ↗

67. I. Zakiev, M. Storchak, G.A. Gogotsi, V. Zakiev, and Y. Kokoieva, Instrumented Indentation Study of Materials Edge Chipping, Ceram. Int., 2021, 47, p 29638–29645. https://doi.org/10.1016/j.ceramint.2021.07.13310.1016/j.ceramint.2021.07.133 ↗

68. M. Storchak, I. Zakiev, V. Zakiev, and A. Manokhin, Coatings strength evaluation of cutting inserts using advanced multi-pass scratch method, Measurement J. Int. Meas. Confed., 2022, 191, p 110745. https://doi.org/10.1016/j.measurement.2022.11074510.1016/j.measurement.2022.110745 ↗

69. M.O. Vasylyev, B.M. Mordyuk, S.M. Voloshko, V.I. Zakiyev, A.P. Burmak, and D.V. Pefti, Hardening of Surface Layers of Cu-39Zn-1Pb Brass at Holding and High-Frequency Impact Deformation in Liquid Nitrogen, Metallofiz. Noveishie Tekhnol., 2019, 41, p 1499–1517. https://doi.org/10.15407/mfint.41.11.1499. (in Ukrainian)10.15407/mfint.41.11.1499 ↗

70. S.A. Firstov, S.R. Ignatovich, and I.M. Zakiev, Size Effect in the Micro- and Nanoindentation and Its Compensation with Regard for the Specific Features of Initial Contact, Strength Mater., 2009, 41, p 147–155. https://doi.org/10.1007/s11223-009-9116-510.1007/s11223-009-9116-5 ↗

71. M.A. Vasylyev, B.N. Mordyuk, S.I. Sidorenko, S.M. Voloshko, A.P. Burmak, I.O. Kruhlov, and V.I. Zakiev, Characterization of ZrN Coating Low-Temperature Deposited on the Preliminary Ar+ Ions Treated 2024 Al-Alloy, Surf. Coat. Technol., 2019, 361, p 413–424. https://doi.org/10.1016/j.surfcoat.2018.12.01010.1016/j.surfcoat.2018.12.010 ↗

72. V.A. Mechnik, M.O. Bondarenko, V.M. Kolodnitskyi, V.I. Zakiev, I.M. Zakiev, M.O. Kuzin, and E.S. Gevorkyan, Influence of Diamond–Matrix Transition Zone Structure on Mechanical Properties and Wear of Sintered Diamond-Containing Composites Based on Fe-Cu-Ni-Sn Matrix with Varying CrB2 Content, Int. J. Refract. Met. Hard Mater., 2021, 100, 105655. https://doi.org/10.1016/j.ijrmhm.2021.10565510.1016/j.ijrmhm.2021.105655 ↗

73. B.N. Mordyuk, G.I. Prokopenko, K.E. Grinkevych, N.A. Piskun, and T.V. Popova, Effects of Ultrasonic Impact Treatment Combined with the Electric Discharge Surface Alloying by Molybdenum on the Surface Related Properties of Low-Carbon Steel G21Mn5, Surf. Coat. Technol., 2017, 309, p 969–979. https://doi.org/10.1016/j.surfcoat.2016.10.05010.1016/j.surfcoat.2016.10.050 ↗

74. B.N. Mordyuk, M.O. Iefimov, K.E. Grinkevych, A.V. Sameljuk, and M.I. Danylenko, Structure and Wear of Al Surface Layers Reinforced with AlCuFe Particles Using Ultrasonic Impact Peening: Effect of Different Particle Sizes, Surf. Coat. Technol., 2011, 205, p 5278–5284. https://doi.org/10.1016/j.surfcoat.2011.05.04610.1016/j.surfcoat.2011.05.046 ↗

75. H. Ghahramanzadeh Asl, Investigation of friction and wear performance on oxidized Ti6Al4V alloy at different temperatures by plasma oxidation method under ambient air and vacuum conditions, Vacuum, 2020, 180, p 109578. https://doi.org/10.1016/j.vacuum.2020.10957810.1016/j.vacuum.2020.109578 ↗

76. K. Kato, Wear in Relation to Friction—A Review, Wear, 2000, 241, p 151–157. https://doi.org/10.1016/S0043-1648(00)00382-310.1016/S0043-1648(00)00382-3 ↗

77. B.N. Mordyuk and G.I. Prokopenko, Ultrasonic Impact Peening for the Surface Properties’ Management, J. Sound Vib., 2008, 308, p 855–866. https://doi.org/10.1016/j.jsv.2007.03.05410.1016/j.jsv.2007.03.054 ↗

78. B.N. Mordyuk and G.I. Prokopenko, Ultrasonic Impact Treatment – An Effective Method for Nanostructuring the Surface Layers in Metallic Materials, Handbook of Mechanical Nanostructuring. M. Aliofkhazraei Ed., Wiley, New York, 2015, p 417–434. https://doi.org/10.1002/9783527674947.ch1710.1002/9783527674947.ch17 ↗

79. M.A. Vasylyev, B.N. Mordyuk, V.P. Bevz, S.M. Voloshko, and O.B. Mordiuk, Ultrasonically Nanostructured Electric-Spark Deposited Ti Surface Layer on Ti6Al4V Alloy: Enhanced Hardness and Corrosion Resistance, Int. J. Surf. Sci. Eng., 2020, 14, p 1–15. https://doi.org/10.1504/IJSURFSE.2020.10587410.1504/IJSURFSE.2020.105874 ↗

80. I. Samerski, J. Vdovak, J. Schöfer, and A. Fischer, The Transition Between High and Low Wear Regimes Under Multidirectional Reciprocating Sliding, Wear, 2009, 267, p 1446–1451. https://doi.org/10.1016/j.wear.2009.03.02510.1016/j.wear.2009.03.025 ↗

81. K.-H. Zum Gahr, Wear by Hard Particles, Tribol. Int., 1998, 31, p 587–596. https://doi.org/10.1016/S0301-679X(98)00079-610.1016/S0301-679X(98)00079-6 ↗

82. K. Aniołek, M. Kupka, and A. Barylski, Sliding Wear Resistance of Oxide Layers Formed on a Titanium Surface During Thermal Oxidation, Wear, 2016, 356–357, p 23–29. https://doi.org/10.1016/j.wear.2016.03.00710.1016/j.wear.2016.03.007 ↗

83. V. Efremenko, K. Shimizu, T. Pastukhova, Yu. Chabak, M. Brykov, K. Kusumoto, and A. Efremenko, Three-Body Abrasive Wear Behaviour of Metastable Spheroidal Carbide Cast Irons with Different Chromium Contents, Int. J. Mater. Res., 2018, 109, p 147–156. https://doi.org/10.3139/146.11158310.3139/146.111583 ↗

84. G. Straffelini and A. Molinari, Dry Sliding Wear of Ti-6Al-4V Alloy as Influenced by the Counterface and Sliding Conditions, Wear, 1999, 236, p 328–338. https://doi.org/10.1016/S0043-1648(99)00292-610.1016/S0043-1648(99)00292-6 ↗

85. M. Fellah, M. Labaïz, O. Assala, L. Dekhil, A. Taleb, H. Rezag, and A. Iost, Tribological Behavior of Ti-6Al-4V and Ti-6Al-7Nb Alloys for Total Hip Prosthesis, Adv. Tribol., 2014, 2014, 451387. https://doi.org/10.1155/2014/45138710.1155/2014/451387 ↗

86. I. Cvijović-Alagić, Z. Cvijović, S. Mitrović, V. Panić, and M. Rakin, Wear and Corrosion Behaviour of Ti-13Nb-13Zr and Ti-6Al-4V Alloys in Simulated Physiological Solution, Corros. Sci., 2011, 53, p 796–808. https://doi.org/10.1016/j.corsci.2010.11.01410.1016/j.corsci.2010.11.014 ↗

87. G. Li, S. Qu, M.X. Xie, and X. Li, Effect of Ultrasonic Surface Rolling at Low Temperatures on Surface Layer Microstructure and Properties of HIP Ti-6Al-4V Alloy, Surf. Coat. Technol., 2017, 316, p 75–84. https://doi.org/10.1016/j.surfcoat.2017.01.09910.1016/j.surfcoat.2017.01.099 ↗

88. Y. Liu, J.X. Deng, H.Z. Yue, R. Duan, X.M. Li, and K. Ehmann, Material Removal Behavior in Processing Green Al2O3 Ceramics Based on Scratch and Edge-Indentation Tests, Ceram. Int., 2019, 45, p 12495–12508. https://doi.org/10.1016/j.ceramint.2019.03.18510.1016/j.ceramint.2019.03.185 ↗

89. K. Hokkirigawa and K. Kato, An Experimental and Theoretical Investigation of Ploughing, Cutting and Wedge Formation During Abrasive Wear, Tribol. Int., 1988, 21(1), p 51–57. https://doi.org/10.1016/0301-679X(88)90128-410.1016/0301-679X(88)90128-4 ↗