DataVXJournal of Materials Engineering and PerformancePaper
journal article·2025-05

Influence of Scanning Strategies on the Tensile and Fatigue Properties of Direct Metal Laser Sintering-Printed Co-Cr-Mo Alloy

Vinod Kumar Jat, R. U. Patil, Sanjay Singh Samant

Journal of Materials Engineering and Performance· Volume 34· Issue 9
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Metals & alloysCeramics & glasses

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. N. Kumar Maurya, R. Sharma, N. Kumar, A. Kumar, P. Anand, P. Rai, and H. Singh, An Overview of Investigation of Fatigue, Tensile Strength and Hardness of the Components Fabricated through Direct Metal Laser Sintering (DMLS) Process, Mater. Today Proc., 2021, 47, p 3979–3984. https://doi.org/10.1016/j.matpr.2021.04.13110.1016/j.matpr.2021.04.131 ↗
2. T.H. Becker, P. Kumar, and U. Ramamurty, Fracture and Fatigue in Additively Manufactured Metals, Acta Mater., 2021, 219, p 117240. https://doi.org/10.1016/j.actamat.2021.11724010.1016/j.actamat.2021.117240 ↗
3. J. Damon, T. Hanemann, S. Dietrich, G. Graf, K.-H. Lang, and V. Schulze, Orientation Dependent Fatigue Performance and Mechanisms of Selective Laser Melted Maraging Steel X3NiCoMoTi18-9-5, Int. J. Fatigue, 2019, 127, p 395–402. https://doi.org/10.1016/j.ijfatigue.2019.06.02510.1016/j.ijfatigue.2019.06.025 ↗
4. H.K. Rafi, N.V. Karthik, H. Gong, T.L. Starr, and B.E. Stucker, Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting, J. Mater. Eng. Perform., 2013, 22(12), p 3872–3883. https://doi.org/10.1007/s11665-013-0658-010.1007/s11665-013-0658-0 ↗
5. M. Leitner, W. Schneller, S. Springer, and F. Grün, Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17–4 PH Steel, J. Mater. Eng. Perform., 2021, 30(7), p 5383–5391. https://doi.org/10.1007/s11665-021-05705-410.1007/s11665-021-05705-4 ↗
6. S. Hatami, T. Ma, T. Vuoristo, J. Bertilsson, and O. Lyckfeldt, Fatigue Strength of 316 L Stainless Steel Manufactured by Selective Laser Melting, J. Mater. Eng. Perform., 2020, 29(5), p 3183–3194. https://doi.org/10.1007/s11665-020-04859-x10.1007/s11665-020-04859-x ↗
7. K. Monroy, J. Delgado, and J. Ciurana, Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process, Procedia Eng., 2013, 63, p 361–369. https://doi.org/10.1016/j.proeng.2013.08.22710.1016/j.proeng.2013.08.227 ↗
8. D.E. Burns, A. Kudzal, B. McWilliams, J. Manjarres, D. Hedges, and P.A. Parker, Investigating Additively Manufactured 17–4 PH for Structural Applications, J. Mater. Eng. Perform., 2019, 28(8), p 4943–4951. https://doi.org/10.1007/s11665-019-04206-910.1007/s11665-019-04206-9 ↗
9. Y. Pupo, J. Delgado, L. Serenó, and J. Ciurana, Scanning Space Analysis in Selective Laser Melting for CoCrMo Powder, Procedia Eng., 2013, 63, p 370–378. https://doi.org/10.1016/j.proeng.2013.08.22810.1016/j.proeng.2013.08.228 ↗
10. B. AlMangour, M. Luqman, D. Grzesiak, H. Al-Harbi, and F. Ijaz, Effect of Processing Parameters on the Microstructure and Mechanical Properties of Co–Cr–Mo Alloy Fabricated by Selective Laser Melting, Mater. Sci. Eng. A, 2020, 792, p 139456. https://doi.org/10.1016/j.msea.2020.13945610.1016/j.msea.2020.139456 ↗
11. W.E. Frazier, Metal Additive Manufacturing: A Review, J. Mater. Eng. Perform., 2014, 23(6), p 1917–1928. https://doi.org/10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
12. K. Darvish, Z.W. Chen, and T. Pasang, Reducing Lack of Fusion during Selective Laser Melting of CoCrMo Alloy: Effect of Laser Power on Geometrical Features of Tracks, Mater. Des., 2016, 112, p 357–366. https://doi.org/10.1016/j.matdes.2016.09.08610.1016/j.matdes.2016.09.086 ↗
13. H.Y. Wan, Z.J. Zhou, C.P. Li, G.F. Chen, and G.P. Zhang, Effect of Scanning Strategy on Grain Structure and Crystallographic Texture of Inconel 718 Processed by Selective Laser Melting, J. Mater. Sci. Technol., 2018, 34(10), p 1799–1804. https://doi.org/10.1016/j.jmst.2018.02.00210.1016/j.jmst.2018.02.002 ↗
14. H.Y. Wan, Z.J. Zhou, C.P. Li, G.F. Chen, and G.P. Zhang, Effect of Scanning Strategy on Mechanical Properties of Selective Laser Melted Inconel 718, Mater. Sci. Eng. A, 2019, 753, p 42–48. https://doi.org/10.1016/j.msea.2019.03.00710.1016/j.msea.2019.03.007 ↗
15. X.D. Nong and X.L. Zhou, Effect of Scanning Strategy on the Microstructure, Texture, and Mechanical Properties of 15–5PH Stainless Steel Processed by Selective Laser Melting, Mater Charact, 2021, 174, p 111012. https://doi.org/10.1016/j.matchar.2021.11101210.1016/j.matchar.2021.111012 ↗
16. B. AlMangour, D. Grzesiak, and J.-M. Yang, Scanning Strategies for Texture and Anisotropy Tailoring during Selective Laser Melting of TiC/316L Stainless Steel Nanocomposites, J. Alloys Compd., 2017, 728, p 424–435. https://doi.org/10.1016/j.jallcom.2017.08.02210.1016/j.jallcom.2017.08.022 ↗
17. K.G. Prashanth, S. Scudino, and J. Eckert, Defining the Tensile Properties of Al-12Si Parts Produced by Selective Laser Melting, Acta Mater., 2017, 126, p 25–35. https://doi.org/10.1016/j.actamat.2016.12.04410.1016/j.actamat.2016.12.044 ↗
18. L. Liu, D. Wang, Y. Yang, Z. Wang, Z. Qian, S. Wu, J. Tang, C. Han, and C. Tan, Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion, Adv. Eng. Mater., 2023 https://doi.org/10.1002/adem.20220049210.1002/adem.202200492 ↗
19. L. Thijs, K. Kempen, J.-P. Kruth, and J. Van Humbeeck, Fine-Structured Aluminium Products with Controllable Texture by Selective Laser Melting of Pre-Alloyed AlSi10Mg Powder, Acta Mater., 2013, 61(5), p 1809–1819. https://doi.org/10.1016/j.actamat.2012.11.05210.1016/j.actamat.2012.11.052 ↗
20. A. Kudzal, B. McWilliams, C. Hofmeister, F. Kellogg, J. Yu, J. Taggart-Scarff, and J. Liang, Effect of Scan Pattern on the Microstructure and Mechanical Properties of Powder Bed Fusion Additive Manufactured 17–4 Stainless Steel, Mater. Des., 2017, 133, p 205–215. https://doi.org/10.1016/j.matdes.2017.07.04710.1016/j.matdes.2017.07.047 ↗
21. K. Yoda, Suyalatu, A. Takaichi, N. Nomura, Y. Tsutsumi, H. Doi, S. Kurosu, A. Chiba, Y. Igarashi, and T. Hanawa, Effects of Chromium and Nitrogen Content on the Microstructures and Mechanical Properties of As-Cast Co–Cr–Mo Alloys for Dental Applications, Acta Biomater., 2012, 8(7), p 2856–2862. https://doi.org/10.1016/j.actbio.2012.03.02410.1016/j.actbio.2012.03.024 ↗
22. M. Jenko, M. Gorenšek, M. Godec, M. Hodnik, B.Š Batič, Č Donik, J.T. Grant, and D. Dolinar, Surface Chemistry and Microstructure of Metallic Biomaterials for Hip and Knee Endoprostheses, Appl. Surf. Sci., 2018, 427, p 584–593. https://doi.org/10.1016/j.apsusc.2017.08.00710.1016/j.apsusc.2017.08.007 ↗
23. Q. Chen and G.A. Thouas, Metallic Implant Biomaterials, Mater. Sci. Eng. R. Rep., 2015, 87, p 1–57. https://doi.org/10.1016/j.mser.2014.10.00110.1016/j.mser.2014.10.001 ↗
24. Y. Koizumi, Y. Chen, Y. Li, K. Yamanaka, A. Chiba, S.-I. Tanaka, and Y. Hagiwara, Uneven Damage on Head and Liner Contact Surfaces of a Retrieved Co–Cr-Based Metal-on-Metal Hip Joint Bearing: An Important Reason for the High Failure Rate, Mater. Sci. Eng. C, 2016, 62, p 532–543. https://doi.org/10.1016/j.msec.2016.01.00610.1016/j.msec.2016.01.006 ↗
25. Y.S. Hedberg, B. Qian, Z. Shen, S. Virtanen, and I. Odnevall Wallinder, In Vitro Biocompatibility of CoCrMo Dental Alloys Fabricated by Selective Laser Melting, Dent. Mater., 2014, 30(5), p 525–534. https://doi.org/10.1016/j.dental.2014.02.00810.1016/j.dental.2014.02.008 ↗
26. A. Takaichi, Suyalatu, T. Nakamoto, N. Joko, N. Nomura, Y. Tsutsumi, S. Migita, H. Doi, S. Kurosu, A. Chiba, N. Wakabayashi, Y. Igarashi, and T. Hanawa, Microstructures and Mechanical Properties of Co–29Cr–6Mo Alloy Fabricated by Selective Laser Melting Process for Dental Applications, J. Mech. Behav. Biomed. Mater., 2013, 21, p 67–76. https://doi.org/10.1016/j.jmbbm.2013.01.02110.1016/j.jmbbm.2013.01.021 ↗
27. S.-Y. Park, K.-S. Kim, B. AlMangour, D. Grzesiak, and K.-A. Lee, Effect of Unit Cell Topology on the Tensile Loading Responses of Additive Manufactured CoCrMo Triply Periodic Minimal Surface Sheet Lattices, Mater. Des., 2021, 206, p 109778. https://doi.org/10.1016/j.matdes.2021.10977810.1016/j.matdes.2021.109778 ↗
28. S.-Y. Park, K.-S. Kim, B. Almangour, and K.-A. Lee, Effect of Microstructure and Unit Cell’s Geometry on the Compressive Mechanical Response of Additively Manufactured Co-Cr-Mo Sheet I-WP Lattice, Arch. Metall. Mater., 2022, 67(4), p 1525–1529. https://doi.org/10.24425/amm.2022.14108710.24425/amm.2022.141087 ↗
29. S. Acharya, V. Gopal, S.K. Gupta, S. Nilawar, G. Manivasagam, S. Suwas, and K. Chatterjee, Anisotropy of Additively Manufactured Co–28Cr–6Mo Influences Mechanical Properties and Biomedical Performance, ACS Appl. Mater. Interfaces, 2022, 14(19), p 21906–21915. https://doi.org/10.1021/acsami.2c0197710.1021/acsami.2c01977 ↗
30. L.E. Murr, S.M. Gaytan, E. Martinez, F. Medina, and R.B. Wicker, Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting, Int. J. Biomater., 2012, 2012, p 1–14. https://doi.org/10.1155/2012/24572710.1155/2012/245727 ↗
31. A. Karaali, K. Mirouh, S. Hamamda, and P. Guiraldenq, Microstructural Study of Tungsten Influence on Co–Cr Alloys, Mater. Sci. Eng. A, 2005, 390(1–2), p 255–259. https://doi.org/10.1016/j.msea.2004.08.00110.1016/j.msea.2004.08.001 ↗
32. S.S. Babu, N. Raghavan, J. Raplee, S.J. Foster, C. Frederick, M. Haines, R. Dinwiddie, M.K. Kirka, A. Plotkowski, Y. Lee, and R.R. Dehoff, Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification, Metall. Mater. Trans. A, 2018, 49(9), p 3764–3780. https://doi.org/10.1007/s11661-018-4702-410.1007/s11661-018-4702-4 ↗
33. Y. Kajima, A. Takaichi, T. Nakamoto, T. Kimura, N. Kittikundecha, Y. Tsutsumi, N. Nomura, A. Kawasaki, H. Takahashi, T. Hanawa, and N. Wakabayashi, Effect of Adding Support Structures for Overhanging Part on Fatigue Strength in Selective Laser Melting, J. Mech. Behav. Biomed. Mater., 2018, 78, p 1–9. https://doi.org/10.1016/j.jmbbm.2017.11.00910.1016/j.jmbbm.2017.11.009 ↗
34. Y. Lu, S. Wu, Y. Gan, S. Zhang, S. Guo, J. Lin, and J. Lin, Microstructure, Mechanical Property and Metal Release of As-SLM CoCrW Alloy under Different Solution Treatment Conditions, J. Mech. Behav. Biomed. Mater., 2016, 55, p 179–190. https://doi.org/10.1016/j.jmbbm.2015.10.01910.1016/j.jmbbm.2015.10.019 ↗
35. H.W. Lee, K.-H. Jung, S.-K. Hwang, S.-H. Kang, and D.-K. Kim, Microstructure and Mechanical Anisotropy of CoCrW Alloy Processed by Selective Laser Melting, Mater. Sci. Eng. A, 2019, 749, p 65–73. https://doi.org/10.1016/j.msea.2019.02.01310.1016/j.msea.2019.02.013 ↗
36. K.-S. Kim, J.-W. Hwang, and K.-A. Lee, Effect of Building Direction on the Mechanical Anisotropy of Biocompatible Co–Cr–Mo Alloy Manufactured by Selective Laser Melting Process, J. Alloys Compd., 2020, 834, p 155055. https://doi.org/10.1016/j.jallcom.2020.15505510.1016/j.jallcom.2020.155055 ↗
37. S.-Y. Park, K.-S. Kim, B. AlMangour, D. Grzesiak, and K.-A. Lee, Compressive Deformation Behavior and Energy Absorption Characteristic of Additively Manufactured Sheet CoCrMo Triply Periodic Minimal Surface Lattices, J. Mater. Res. Technol., 2022, 18, p 171–184. https://doi.org/10.1016/j.jmrt.2022.02.08610.1016/j.jmrt.2022.02.086 ↗
38. J.M. Aarts, J.J.E. Choi, S. Metcalfe, and V. Bennani, Influence of Build Angulation on the Mechanical Properties of a Direct-Metal Laser-Sintered Cobalt-Chromium Used for Removable Partial Denture Frameworks, J. Prosthet. Dent., 2021, 126(2), p 224–230. https://doi.org/10.1016/j.prosdent.2020.06.01410.1016/j.prosdent.2020.06.014 ↗
39. X. Zhou, K. Li, D. Zhang, X. Liu, J. Ma, W. Liu, and Z. Shen, Textures Formed in a CoCrMo Alloy by Selective Laser Melting, J. Alloys Compd., 2015, 631, p 153–164. https://doi.org/10.1016/j.jallcom.2015.01.09610.1016/j.jallcom.2015.01.096 ↗
40. D.D. Xiang, P. Wang, X.P. Tan, S. Chandra, C. Wang, M.L.S. Nai, S.B. Tor, W.Q. Liu, and E. Liu, Anisotropic Microstructure and Mechanical Properties of Additively Manufactured Co–Cr–Mo Alloy Using Selective Electron Beam Melting for Orthopedic Implants, Mater. Sci. Eng. A, 2019, 765, p 138270. https://doi.org/10.1016/j.msea.2019.13827010.1016/j.msea.2019.138270 ↗
41. M. Béreš, C.C. Silva, P.W.C. Sarvezuk, L. Wu, L.H.M. Antunes, A.L. Jardini, A.L.M. Feitosa, J. Žilková, H.F.G. de Abreu, and R.M. Filho, Mechanical and Phase Transformation Behaviour of Biomedical Co-Cr-Mo Alloy Fabricated by Direct Metal Laser Sintering, Mater. Sci. Eng. A, 2018, 714, p 36–42. https://doi.org/10.1016/j.msea.2017.12.08710.1016/j.msea.2017.12.087 ↗
42. A. Takaichi, Y. Kajima, N. Kittikundecha, H.L. Htat, H.H. Wai Cho, T. Hanawa, T. Yoneyama, and N. Wakabayashi, Effect of Heat Treatment on the Anisotropic Microstructural and Mechanical Properties of Co–Cr–Mo Alloys Produced by Selective Laser Melting, J. Mech. Behav. Biomed. Mater., 2020, 102, p 103496. https://doi.org/10.1016/j.jmbbm.2019.10349610.1016/j.jmbbm.2019.103496 ↗
43. Y. Lu, S. Wu, Y. Gan, J. Li, C. Zhao, D. Zhuo, and J. Lin, Investigation on the Microstructure, Mechanical Property and Corrosion Behavior of the Selective Laser Melted CoCrW Alloy for Dental Application, Mater. Sci. Eng. C, 2015, 49, p 517–525. https://doi.org/10.1016/j.msec.2015.01.02310.1016/j.msec.2015.01.023 ↗
44. S.L. Sing, S. Huang, and W.Y. Yeong, Effect of Solution Heat Treatment on Microstructure and Mechanical Properties of Laser Powder Bed Fusion Produced Cobalt-28chromium-6molybdenum, Mater. Sci. Eng. A, 2020, 769, p 138511. https://doi.org/10.1016/j.msea.2019.13851110.1016/j.msea.2019.138511 ↗
45. Y. Kajima, A. Takaichi, T. Nakamoto, T. Kimura, Y. Yogo, M. Ashida, H. Doi, N. Nomura, H. Takahashi, T. Hanawa, and N. Wakabayashi, Fatigue Strength of Co-Cr-Mo Alloy Clasps Prepared by Selective Laser Melting, J. Mech. Behav. Biomed. Mater., 2016, 59, p 446–458. https://doi.org/10.1016/j.jmbbm.2016.02.03210.1016/j.jmbbm.2016.02.032 ↗
46. E. Seki, Y. Kajima, A. Takaichi, N. Kittikundecha, H.H.W. Cho, H.L. Htat, H. Doi, T. Hanawa, and N. Wakabayashi, Effect of Heat Treatment on the Microstructure and Fatigue Strength of CoCrMo Alloys Fabricated by Selective Laser Melting, Mater. Lett., 2019, 245, p 53–56. https://doi.org/10.1016/j.matlet.2019.02.08510.1016/j.matlet.2019.02.085 ↗
47. N. Razavi, A. Avanzini, G. Cornacchia, L. Giorleo, and F. Berto, Effect of Heat Treatment on Fatigue Behavior of As-Built Notched Co-Cr-Mo Parts Produced by Selective Laser Melting, Int. J. Fatigue, 2021, 142, p 105926. https://doi.org/10.1016/j.ijfatigue.2020.10592610.1016/j.ijfatigue.2020.105926 ↗
48. X. Dong, Y. Zhou, Q. Sun, Y. Qu, H. Shi, W. Liu, H. Peng, B. Zhang, S. Xu, J. Yan, and N. Li, Fatigue Behavior of Biomedical Co–Cr–Mo–W Alloy Fabricated by Selective Laser Melting, Mater. Sci. Eng. A, 2020, 795, p 140000. https://doi.org/10.1016/j.msea.2020.14000010.1016/j.msea.2020.140000 ↗
49. J. Haan, M. Asseln, M. Zivcec, J. Eschweiler, R. Radermacher, and C. Broeckmann, Effect of Subsequent Hot Isostatic Pressing on Mechanical Properties of ASTM F75 Alloy Produced by Selective Laser Melting, Powder Metall., 2015, 58(3), p 161–165. https://doi.org/10.1179/0032589915Z.00000000023610.1179/0032589915Z.000000000236 ↗
50. D. Wei, Y. Koizumi, T. Takashima, M. Nagasako, and A. Chiba, Fatigue Improvement of Electron Beam Melting-Fabricated Biomedical Co–Cr–Mo Alloy by Accessible Heat Treatment, Mater. Res. Lett., 2018, 6(1), p 93–99. https://doi.org/10.1080/21663831.2017.139650610.1080/21663831.2017.1396506 ↗
51. M. Sage and C. Guillaud, Méthode d’analyse Quantitative Des Variétés Allotropiques Du Cobalt Par Les Rayons X, Rev. Métall., 1950, 47(2), p 139–145. https://doi.org/10.1051/metal/19504702013910.1051/metal/195047020139 ↗
52. ASTM E8/E8M-24, Standard Test Methods for Tension Testing of Metallic Materials, ASTM International. 2024, 3, p 1–35.
53. ASTM E466-21, Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials, ASTM International. 2021, 03, p 1–7.
54. D.V. Tchana Nkonta, F. Simescu-Lazar, R. Drevet, O. Aaboubi, J. Fauré, D. Retraint, and H. Benhayoune, Influence of the Surface Mechanical Attrition Treatment (SMAT) on the Corrosion Behavior of Co28Cr6Mo Alloy in Ringer’s Solution, J. Solid State Electrochem., 2018, 22(4), p 1091–1098. https://doi.org/10.1007/s10008-017-3851-510.1007/s10008-017-3851-5 ↗
55. G. Barucca, E. Santecchia, G. Majni, E. Girardin, E. Bassoli, L. Denti, A. Gatto, L. Iuliano, T. Moskalewicz, and P. Mengucci, Structural Characterization of Biomedical Co–Cr–Mo Components Produced by Direct Metal Laser Sintering, Mater. Sci. Eng. C, 2015, 48, p 263–269. https://doi.org/10.1016/j.msec.2014.12.00910.1016/j.msec.2014.12.009 ↗
56. J.H. Robinson, I.R.T. Ashton, E. Jones, P. Fox, and C. Sutcliffe, The Effect of Hatch Angle Rotation on Parts Manufactured Using Selective Laser Melting, Rapid Prototyp. J., 2019, 25(2), p 289–298. https://doi.org/10.1108/RPJ-06-2017-011110.1108/RPJ-06-2017-0111 ↗
57. A. Jiménez-Jiménez, A.M. Paniagua-Mercado, A. García-Bórquez, A.S. la De Ita-De Torre, C. Mejía-García, V.M. López-Hirata, M.L. Saucedo-Muñoz, and E. Miguel-Díaz, CVN Impact Energy and Fracture Characteristics Correlations with Different Oxide Nanoparticles Improving Submerged Arc Welds, Mater. Res. Express, 2021, 8(1), p 016536. https://doi.org/10.1088/2053-1591/abdaf210.1088/2053-1591/abdaf2 ↗
58. K. Vutova, V. Stefanova, M. Markov, and V. Vassileva, Study on Hardness of Heat-Treated CoCrMo Alloy Recycled by Electron Beam Melting, Materials (Basel), 2023, 16(7), p 2634. https://doi.org/10.3390/ma1607263410.3390/ma16072634 ↗
59. M.S. Bisht, V. Gaur, and I.V. Singh, On Mechanical Properties of SLM Al–Si Alloy: Role of Heat Treatment-Induced Evolution of Silicon Morphology, Mater. Sci. Eng. A, 2022, 858, p 144157. https://doi.org/10.1016/j.msea.2022.14415710.1016/j.msea.2022.144157 ↗
60. R.H. Li, Z.J. Zhang, P. Zhang, and Z.F. Zhang, Improved Fatigue Properties of Ultrafine-Grained Copper under Cyclic Torsion Loading, Acta Mater., 2013, 61(15), p 5857–5868. https://doi.org/10.1016/j.actamat.2013.06.03210.1016/j.actamat.2013.06.032 ↗
61. V. Gaur, M. Enoki, T. Okada, and S. Yomogida, A Study on Fatigue Behavior of MIG-Welded Al-Mg Alloy with Different Filler-Wire Materials under Mean Stress, Int. J. Fatigue, 2018, 107, p 119–129. https://doi.org/10.1016/j.ijfatigue.2017.11.00110.1016/j.ijfatigue.2017.11.001 ↗