Effects of Laser Powder Bed Fusion Process Parameters on Porosity, Liquid Retention, and Thermal and Surface Properties for 316L, CoCrW and Ti6Al4V Alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. M. Attaran, The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing, Bus. Horiz., 2017, 60(5), p 677–688. https://doi.org/10.1016/j.bushor.2017.05.01110.1016/j.bushor.2017.05.011 ↗
2. I. Ribeiro, F. Matos, C. Jacinto, H. Salman, G. Cardeal, H. Carvalho, R. Godina, and P. Peças, Framework for life cycle sustainability assessment of additive manufacturing, Sustainability, 2020, 12(3), p 929. https://doi.org/10.3390/su1203092910.3390/su12030929 ↗
3. B. Berman, 3-D printing: the new industrial revolution, Bus. Horiz., 2012, 55(2), p 155–162. https://doi.org/10.1016/j.bushor.2011.11.00310.1016/j.bushor.2011.11.003 ↗
4. S. Ford and M. Despeisse, Additive manufacturing and sustainability: an exploratory study of the advantages and challenges, J. Clean. Prod., 2016, 137, p 1573–1587. https://doi.org/10.1016/j.jclepro.2016.04.15010.1016/j.jclepro.2016.04.150 ↗
5. V. Petrovic, J. Vicente Haro Gonzalez, O. Jordá Ferrando, J. Delgado Gordillo, J. Ramón Blasco Puchades, and L. Portolés Griñan, Additive layered manufacturing: sectors of industrial application shown through case studies, Int. J. Prod. Res., 2011, 49(4), p 1061–1079. https://doi.org/10.1080/0020754090347978610.1080/00207540903479786 ↗
6. B. Blakey-Milner, P. Gradl, G. Snedden, M. Brooks, J. Pitot, E. Lopez, M. Leary, F. Berto, and A. du Plessis, Metal additive manufacturing in aerospace: a review, Mater. Des., 2021, 209, p 110008. https://doi.org/10.1016/j.matdes.2021.11000810.1016/j.matdes.2021.110008 ↗
7. S.C. Altıparmak and B. Xiao, A market assessment of additive manufacturing potential for the aerospace industry, J. Manuf. Process., 2021, 68, p 728–738. https://doi.org/10.1016/j.jmapro.2021.05.07210.1016/j.jmapro.2021.05.072 ↗
8. V. Juechter, M.M. Franke, T. Merenda, A. Stich, C. Körner, and R.F. Singer, Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications, Addit. Manuf., 2018, 22, p 118–126. https://doi.org/10.1016/j.addma.2018.05.00810.1016/j.addma.2018.05.008 ↗
9. E. Dalpadulo, A. Petruccioli, F. Gherardini, and F. Leali, A review of automotive spare-part reconstruction based on additive manufacturing, J. Manuf. Mater. Process., 2022, 6(6), p 133. https://doi.org/10.3390/jmmp606013310.3390/jmmp6060133 ↗
10. E.B. Joyee and Y. Pan, Additive manufacturing of multi-material soft robot for on-demand drug delivery applications, J. Manuf. Process., 2020, 56, p 1178–1184. https://doi.org/10.1016/j.jmapro.2020.03.05910.1016/j.jmapro.2020.03.059 ↗
11. M. Saari, B. Cox, E. Richer, P.S. Krueger, and A.L. Cohen, Fiber encapsulation additive manufacturing: an enabling technology for 3D printing of electromechanical devices and robotic components, 3D Print. Addit. Manuf., 2015, 2(1), p 32–39. https://doi.org/10.1089/3dp.2015.000310.1089/3dp.2015.0003 ↗
12. L.R.R. da Silva, W.F. Sales, F.D.A.R. Campos, J.A.G. de Sousa, R. Davis, A. Singh, R.T. Coelho and B. Borgohain, A Comprehensive Review on Additive Manufacturing of Medical Devices, Progr. Addit. Manuf., 2021, 6(3), p 517–553. https://doi.org/10.1007/s40964-021-00188-010.1007/s40964-021-00188-0 ↗
13. E. Langi, L.G. Zhao, P. Jamshidi, M. Attallah, V.V. Silberschmidt, H. Willcock and F. Vogt, A Comparative Study of Microstructures and Nanomechanical Properties of Additively Manufactured and Commercial Metallic Stents, Mater. Today Commun., 2022, 31, p 103372. https://doi.org/10.1016/j.mtcomm.2022.10337210.1016/j.mtcomm.2022.103372 ↗
14. C. Sun, Y. Wang, M.D. McMurtrey, N.D. Jerred, F. Liou and J. Li, Additive Manufacturing for Energy: A Review, Appl. Energy, 2021, 282, p 116041. https://doi.org/10.1016/j.apenergy.2020.11604110.1016/j.apenergy.2020.116041 ↗
15. A. Zhakeyev, P. Wang, L. Zhang, W. Shu, H. Wang and J. Xuan, Additive Manufacturing: Unlocking the Evolution of Energy Materials, Adv. Sci., 2017, 4(10), p 1700187. https://doi.org/10.1002/advs.20170018710.1002/advs.201700187 ↗
16. D.D. Gu, W. Meiners, K. Wissenbach and R. Poprawe, Laser Additive Manufacturing of Metallic Components: Materials, Processes and Mechanisms, Int. Mater. Rev., 2012, 57(3), p 133–164. https://doi.org/10.1179/1743280411Y.000000001410.1179/1743280411Y.0000000014 ↗
17. C.Y. Yap, C.K. Chua, Z.L. Dong, Z.H. Liu, D.Q. Zhang, L.E. Loh and S.L. Sing, Review of Selective Laser Melting: Materials and Applications, Appl. Phys. Rev., 2015, 2(4), p 041101. https://doi.org/10.1063/1.493592610.1063/1.4935926 ↗
18. B.M. Nafis, R. Whitt, A.C. Iradukunda and D. Huitink, Additive Manufacturing for Enhancing Thermal Dissipation in heat Sink Implementation: A Review, Heat Transfer Eng., 2021, 42(12), p 967–984. https://doi.org/10.1080/01457632.2020.176624610.1080/01457632.2020.1766246 ↗
19. E.F. Akyürek, K. Geliş, B. Şahin and E. Manay, Experimental Analysis for Heat Transfer of Nanofluid with Wire Coil Turbulators in a Concentric Tube Heat Exchanger, Results Phys., 2018, 9, p 376–389. https://doi.org/10.1016/j.rinp.2018.02.06710.1016/j.rinp.2018.02.067 ↗
20. E. Mandev and E. Manay, Effects of Surface Roughness in Multiple Microchannels on Mixed Convective Heat Transfer, Appl. Therm. Eng., 2022, 217, p 119102. https://doi.org/10.1016/j.applthermaleng.2022.11910210.1016/j.applthermaleng.2022.119102 ↗
21. G. Kaya, T.O. Ergüder, İ Hacısalihoğlu, E. Mandev, E. Manay and F. Yıldız, Wear and Thermal Behavior of TiAlN Thin Films onto Ti6Al4V Alloy Manufactured by Selective Laser Melting Method, 3D Print. Addit. Manuf., 2021, 10(4), p 650–660. https://doi.org/10.1089/3dp.2021.008110.1089/3dp.2021.0081 ↗
22. H.C. Aksa, İ Hacısalihoğlu, F. Yıldız, T. Varol, O. Güler, G. Kaya and S.B. Akçay, Effects of Fabrication Parameters and Post-processing Treatments on the Mechanical and Tribological Behavior of Surface-Enhanced Copper Based Materials by Selective Laser Melting, J. Mater. Process. Technol., 2022, 304, p 117564. https://doi.org/10.1016/j.jmatprotec.2022.11756410.1016/j.jmatprotec.2022.117564 ↗
23. T. Yetim, H. Tekdir, M. Taftali, K. Turalioglu and A.F. Yetim, Synthesis and Characterisation of Single and Duplex ZnO/TiO2 Ceramic Films on Additively Manufactured Bimetallic Material of 316L Stainless Steel and Ti6Al4V, Surf. Topogr. Metrol. Prop., 2023, 11(2), p 024005. https://doi.org/10.1088/2051-672X/accf6c10.1088/2051-672X/accf6c ↗
24. Q. Shi, W. Du, F. Qin, C. Tan, K. Khanlari, H. Xie, X. Liu and A. Wu, Pure Tungsten Fabricated by Laser Powder Bed Fusion with Subsequent Hot Isostatic Pressing: Microstructural Evolution, Mechanical Properties, and Thermal Conductivity, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-07891-910.1007/s11665-023-07891-9 ↗
25. K. Alrbaey, D. Wimpenny, R. Tosi, W. Manning and A. Moroz, On optimization of Surface Roughness of Selective Laser Melted Stainless Steel Parts: A Statistical Study, J. Mater. Eng. Perform., 2014, 23, p 2139–2148. https://doi.org/10.1007/s11665-014-0993-910.1007/s11665-014-0993-9 ↗
26. S. Gao, X. Yan, C. Chang, E. Aubry, M. Liu, H. Liao and N. Fenineche, Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys, J. Mater. Eng. Perform., 2021, 30, p 5020–5030. https://doi.org/10.1007/s11665-021-05591-w10.1007/s11665-021-05591-w ↗
27. W.M. Tucho, V.H. Lysne, H. Austbø, A. Sjolyst-Kverneland and V. Hansen, Investigation of Effects of Process Parameters on Microstructure and Hardness of SLM Manufactured SS316L, J. Alloy. Compd., 2018, 740, p 910–925. https://doi.org/10.1016/j.jallcom.2018.01.09810.1016/j.jallcom.2018.01.098 ↗
28. H. Li, M. Ramezani, M. Li, C. Ma and J. Wang, Tribological Performance of Selective Laser Melted 316L Stainless Steel, Tribol. Int., 2018, 128, p 121–129. https://doi.org/10.1016/j.triboint.2018.07.02110.1016/j.triboint.2018.07.021 ↗
29. L. Tonelli, A. Fortunato and L. Ceschini, CoCr Alloy Processed by Selective Laser Melting (SLM): Effect of Laser Energy Density on Microstructure, Surface Morphology, and Hardness, J. Manuf. Process., 2020, 52, p 106–119. https://doi.org/10.1016/j.jmapro.2020.01.05210.1016/j.jmapro.2020.01.052 ↗
30. J.H. Wang, J. Ren, W. Liu, X.Y. Wu, M.X. Gao and P.K. Bai, Effect of Selective Laser Melting Process Parameters on Microstructure and Properties of Co-Cr Alloy, Materials, 2018, 11(9), p 1546. https://doi.org/10.3390/ma1109154610.3390/ma11091546 ↗
31. B. Zhou, J. Zhou, H. Li and F. Lin, A Study of the Microstructures and Mechanical Properties of Ti6Al4V Fabricated by SLM Under Vacuum, Mater. Sci. Eng. A, 2018, 724, p 1–10. https://doi.org/10.1016/j.msea.2018.03.02110.1016/j.msea.2018.03.021 ↗
32. M. Oyesola, K. Mpofu, N. Mathe, S. Fatoba, S. Hoosain and I. Daniyan, Optimization of Selective Laser Melting Process Parameters for Surface Quality Performance of the Fabricated Ti6Al4V, Int. J. Adv. Manuf. Technol., 2021, 114, p 1585–1599. https://doi.org/10.1007/s00170-021-06953-310.1007/s00170-021-06953-3 ↗
33. H. Ali, H. Ghadbeigi and K. Mumtaz, Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V, J. Mater. Eng. Perform., 2018, 27, p 4059–4068. https://doi.org/10.1007/s11665-018-3477-510.1007/s11665-018-3477-5 ↗
34. K.P.K. Reddy, B.N. Rao, M.N. Nazeemudheen, S.K. Manwatkar and S.N. Murty, Selection of Optimal Process Parameters to Obtain Defect-Free Builds in IN718 Made by Laser Powder Bed Fusion, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-08677-910.1007/s11665-023-08677-9 ↗
35. A. Dareh Baghi, S. Nafisi, R. Hashemi, H. Ebendorff-Heidepriem and R. Ghomashchi, A New Approach to Empirical Optimization of laser Powder Bed Fusion Process for Ti6Al4V Parts, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-08060-810.1007/s11665-023-08060-8 ↗
36. M. Abdel-latif, K. Abdel-Ghany, N. El-Mahallawy and T. Mattar, Effect of Laser Speed on Microstructure and Mechanical Properties of Aisi h13 Tool Steel Prepared by Laser Powder Bed Fusion Process, J. Mater. Eng. Perform., 2021, 30, p 8821–8830. https://doi.org/10.1007/s11665-021-06321-y10.1007/s11665-021-06321-y ↗
37. G. Huang, Z. Min, L. Yang, P.X. Jiang and M. Chyu, Transpiration Cooling for Additive Manufactured Porous Plates with Partition Walls, Int. J. Heat Mass Transf., 2018, 124, p 1076–1087. https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.1110.1016/j.ijheatmasstransfer.2018.03.11 ↗
38. Z. Min, G. Huang, S.N. Parbat, L. Yang and M.K. Chyu, Experimental Investigation on Additively Manufactured Transpiration and Film Cooling Structures, J. Turbomach., 2019 https://doi.org/10.1115/1404200910.1115/14042009 ↗
39. G. Huang, Y. Zhu, Z.Y. Liao, Z. Huang and P.X. Jiang, Transpiration Cooling with Bio-Inspired Structured Surfaces, Bioinspir. Biomim., 2020, 15(3), p 036016. https://doi.org/10.1088/1748-3190/ab6bdf10.1088/1748-3190/ab6bdf ↗
40. Y. Wu, K. Sun, S. Yu and L. Zuo, Modeling the Selective Laser Melting-Based Additive Manufacturing of Thermoelectric Powders, Addit. Manuf., 2021, 37, p 101666. https://doi.org/10.1016/j.addma.2020.10166610.1016/j.addma.2020.101666 ↗
41. A.N. Pilagatti, G. Piscopo, E. Atzeni, L. Iuliano and A. Salmi, Design of Additive Manufactured Passive Heat Sinks for Electronics, J. Manuf. Process., 2021, 64, p 878–888. https://doi.org/10.1016/j.jmapro.2021.01.03510.1016/j.jmapro.2021.01.035 ↗
42. J.H. Tan, W.L.E. Wong and K.W. Dalgarno, An Overview of Powder Granulometry on Feedstock and Part Performance in the selective Laser Melting Process, Addit. Manuf., 2017, 18, p 228–255. https://doi.org/10.1016/j.addma.2017.10.01110.1016/j.addma.2017.10.011 ↗
43. F.S. Shieu, M.J. Deng and S.H. Lin, Microstructure and Corrosion Resistance of a Type 316L Stainless Steel, Corros. Sci., 1998, 40(8), p 1267–1279. https://doi.org/10.1016/S0010-938X(97)00143-110.1016/S0010-938X(97)00143-1 ↗
44. G. Huang, Y. Zhu, Z. Liao, R. Xu and P.X. Jiang, Biomimetic Self-Pumping Transpiration Cooling for Additive Manufactured Porous Module with Tree-Like Micro-channel, Int. J. Heat Mass Transf., 2019, 131, p 403–410. https://doi.org/10.1016/j.ijheatmasstransfer.2018.07.14310.1016/j.ijheatmasstransfer.2018.07.143 ↗
45. GE Additive. (10.01.2024). AP&C Materials Overview. Advanced Powders. https://www.advancedpowders.com/powders
46. K. Turalıoğlu, M. Taftalı, H. Tekdir, O. Çomaklı, M. Yazıcı, T. Yetim and A.F. Yetim, The Tribological and Corrosion Properties of Anodized Ti6Al4V/316L Bimetallic Structures Manufactured by Additive Manufacturing, Surf. Coat. Technol., 2021, 405, p 126635. https://doi.org/10.1016/j.surfcoat.2020.12663510.1016/j.surfcoat.2020.126635 ↗
47. M. Taftali, K. Turalioğlu, A.F. Yetim, Y. Uzun, S. Akpinar and F. Yildiz, Improvements in the Static/Dynamic Strength of Porcelain Fused to Metal Dental Crowns with Surface Protrusions Produced by Selective Laser Melting, J. Manuf. Process., 2021, 65, p 112–118. https://doi.org/10.1016/j.jmapro.2021.03.01710.1016/j.jmapro.2021.03.017 ↗
48. L. Thijs, F. Verhaeghe, T. Craeghs, J. Van Humbeeck and J.P. Kruth, A Study of the Microstructural Evolution During Selective Laser Melting of Ti–6Al–4V, Acta Mater., 2010, 58(9), p 3303–3312. https://doi.org/10.1016/j.actamat.2010.02.00410.1016/j.actamat.2010.02.004 ↗
49. T. Varol, İ Hacısalihoğlu, G. Kaya, O. Güler, F. Yıldız, H.C. Aksa and S.B. Akçay, The Effect of Selective Laser Melting Process on the Microstructure, Density, and Electrical Conductivity of Silver-Coated Copper Cores, J. Mater. Eng. Perform., 2021, 30, p 5216–5226. https://doi.org/10.1007/s11665-021-05712-510.1007/s11665-021-05712-5 ↗
50. İ Hacısalihoğlu, G. Kaya, T.O. Ergüder, E. Mandev, E. Manay and F. Yıldız, Tribological and Thermal Properties of Plasma Nitrided Ti45Nb Alloy, Surf. Interfaces, 2021, 22, p 100893. https://doi.org/10.1016/j.surfin.2020.10089310.1016/j.surfin.2020.100893 ↗
51. H. Tekdir and A.F. Yetim, Additive Manufacturing of multiple Layered Materials (Ti6Al4V/316L) and Improving their Tribological Properties with Glow Discharge Surface Modification, Vacuum, 2021, 184, p 109893. https://doi.org/10.1016/j.vacuum.2020.10989310.1016/j.vacuum.2020.109893 ↗
52. Y.B. Bozkurt, Y.S. Kavasoğlu, B. Atik, H. Kovacı, Y. Uzun and A. Çelik, Comparison Study of Corrosion Behavior for Chitosan Coated Ti6Al4V Alloy Produced by Selective Laser Melting and Forging, Prog. Org. Coat., 2023, 182, p 107655. https://doi.org/10.1016/j.porgcoat.2023.10765510.1016/j.porgcoat.2023.107655 ↗
53. Y. Lu, S. Wu, Y. Gan, S. Zhang, S. Guo, J. Lin and J. Lin, Microstructure, Mechanical Property and Metal Release of As-SLM CoCrW Alloy Under Different Solution Treatment Conditions, J. Mech. Behav. Biomed. Mater., 2016, 55, p 179–190. https://doi.org/10.1016/j.jmbbm.2015.10.01910.1016/j.jmbbm.2015.10.019 ↗
54. J.C. Simmons, X. Chen, A. Azizi, M.A. Daeumer, P.Y. Zavalij, G. Zhou and S.N. Schiffres, Influence of Processing and Microstructure on the Local and Bulk Thermal Conductivity of Selective Laser Melted 316L Stainless Steel, Addit. Manuf., 2020, 32, p 100996. https://doi.org/10.1016/j.addma.2019.10099610.1016/j.addma.2019.100996 ↗
55. Stainless Steel AISI 316L. (10.01.2024). ESA M&P Database Server For Outgassing, Corrosion, SCC, Flammability and Materials Data. http://esmat.esa.int/
56. J.H. Ha and C.M. Lee, A Study on the Thermal Effect by multi Heat Sources and Machining Characteristics of Laser and Induction Assisted Milling, Materials, 2019, 12(7), p 1032. https://doi.org/10.3390/ma1207103210.3390/ma12071032 ↗
57. J. Yang, S. Sun, M. Brandt and W. Yan, Experimental Investigation and 3D Finite Element Prediction of the Heat Affected zone During Laser Assisted Machining of Ti6Al4V Alloy, J. Mater. Process. Technol., 2010, 210(15), p 2215–2222. https://doi.org/10.1016/j.jmatprotec.2010.08.00710.1016/j.jmatprotec.2010.08.007 ↗
58. MSE Supplies LLC. (10.01.2024). List of Thermal Conductivity Values for Natural and Engineered. https://www.msesupplies.com/pages/list-of-thermal-conductivity-values-for-natural-and-engineered-materials
59. D. Wang, Y. Liu, Y. Yang and D. Xiao, Theoretical and Experimental Study on Surface Roughness of 316L Stainless Steel Metal Parts Obtained Through Selective Laser Melting, Rapid Prototyping J., 2016, 22(4), p 706–716. https://doi.org/10.1108/RPJ-06-2015-007810.1108/RPJ-06-2015-0078 ↗
60. E.R. Baciu, R. Cimpoeșu, A. Vițalariu, C. Baciu, N. Cimpoeșu, A. Sodor and A. Murariu, Surface Analysis of 3D (SLM) Co–Cr–W Dental Metallic Materials, Appl. Sci., 2020, 11(1), p 255. https://doi.org/10.3390/app1101025510.3390/app11010255 ↗
61. M. Krol and T. Tański, Surface Quality Research for selective Laser Melting of Ti-6Al-4V Alloy, Arch. Metall. Mater., 2016, 61(3), p 1291–1296. https://doi.org/10.1515/amm-2016-021310.1515/amm-2016-0213 ↗
62. A.B. Kale, J. Singh, B.K. Kim, D.I. Kim and S.H. Choi, Effect of Initial Microstructure on the Deformation Heterogeneities of 316L Stainless Steels Fabricated by Selective Laser Melting Processing, J. Market. Res., 2020, 9(4), p 8867–8883. https://doi.org/10.1016/j.jmrt.2020.06.01510.1016/j.jmrt.2020.06.015 ↗
63. B. Zhang, L. Dembinski and C. Coddet, The Study of the Laser Parameters and Environment Variables Effect on Mechanical Properties of High Compact Parts Elaborated by Selective Laser Melting 316L Powder, Mater. Sci. Eng. A, 2013, 584, p 21–31. https://doi.org/10.1016/j.msea.2013.06.05510.1016/j.msea.2013.06.055 ↗
64. E. Liverani, S. Toschi, L. Ceschini and A. Fortunato, Effect of Selective Laser Melting (SLM) Process Parameters on Microstructure and Mechanical Properties of 316L Austenitic Stainless Steel, J. Mater. Process. Technol., 2017, 249, p 255–263. https://doi.org/10.1016/j.jmatprotec.2017.05.04210.1016/j.jmatprotec.2017.05.042 ↗