Fracture Mechanism during Uniaxial Compression of a Novel Metal/Metal Composite with 3D Single Integrated Reinforcement
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. S.M.H. Mirbagheri, H. Vali, and H. Soltani, Heat Treatment of Closed-Cell A356 + 4 wt.%Cu + 2 wt.%Ca Foam and Its Effect on the Foam Mechanical Behavior, J. Mater. Eng. Perform., 2017, 26, p 14–27.10.1007/s11665-016-2425-5 ↗
2. M. Salehi, S.M.H. Mirbagheri, and J. Ramiani, A, Experimental, Theoretical, and Numerical Investigations into the Compressive Behavior of Multi-layer Metallic Foam Filled Tubes, J. Mater. Eng. Perform., 2022, 31, p 3723–3740.10.1007/s11665-021-06475-9 ↗
3. N. Movahedi, G.E. Murch, I.V. Belova, and T. Fiedler, Manufacturing and Compressive Properties of Sandwich Foam Tubes Containing Metal Syntactic Foam, Compos. Struct., 2023, 15(316), p 117012.10.1016/j.compstruct.2023.117012 ↗
4. T. Fiedler, N. Movahedi, L. York, and S. Broxtermann, Functionally-Graded Metallic Syntactic Foams Produced via Particle Pre-Compaction, Metals., 2020, 10(3), p 314.10.3390/met10030314 ↗
5. P. Sharma and P.M. Pandey, A Novel Manufacturing Route for the Fabrication of Topologically-Ordered Open-Cell Porous Iron Scaffold, Mater. Lett., 2018, 222, p 160–163.10.1016/j.matlet.2018.03.206 ↗
6. P. Sharma and P.M. Pandey, Morphological and Mechanical Characterization of Topologically Ordered Open Cell Porous Iron Foam Fabricated Using 3D Printing and Pressureless Microwave sintering, Mater. Des., 2018, 160, p 442–454.10.1016/j.matdes.2018.09.029 ↗
7. Y.Z. Guo, Z. Qiu, and Y.J. Zhao, Synthesis of Mesoporous Cu/Mg/Fe Layered Double Hydroxide and its Adsorption Performance for Arsenate in Aqueous Solutions, J. Environ. Sci. China, 2013, 25(5), p 944–953.10.1016/S1001-0742(12)60106-5 ↗
8. R. Liu, W. Chen, and J. Zhao, A Review on Factors Affecting the Mechanical Properties of Additively-Manufactured Lattice Structures, J. Mater. Eng. Perform., 2023, 20, p 1–27.10.1007/s11665-010-9641-1 ↗
9. D. Almonti, G. Baiocco, E. Mingione, and N. Ucciardello, Evaluation of the Effects of the Metal Foams Geometrical Features on Thermal and Fluid-Dynamical Behavior in Forced Convection, Int. J. Adv. Manuf. Technol., 2020, 111(3–4), p 1157–1172.10.1007/s00170-020-06092-1 ↗
10. Z. Ma, D.Z. Zhang, F. Liu, J. Jiang, M. Zhao, and T. Zhang, Lattice Structures of Cu-Cr-Zr Copper Alloy by Selective Laser Melting: Microstructures, Mechanical Properties and Energy Absorption, Mater. Des., 2020, 1(187), p 108406.10.1016/j.matdes.2019.108406 ↗
11. Z.P. Sun, Y.B. Guo, and V.P. Shim, Characterisation and Modeling of Additively-Manufactured Polymeric Hybrid Lattice Structures for Energy Absorption, Int. J. Mech. Sci., 2021, 1(191), p 106101.10.1016/j.ijmecsci.2020.106101 ↗
12. J. Xiaogang, D. Lin, W. Wei et al., Study on Tensile Properties of 3D Porous Lattice Structures Based on Cube Truss Cells, J. Mater. Eng. Perform., 2022, 32, p 3658–3667.10.1007/s11665-022-07319-w ↗
13. N. Wang, I. Kaur, P. Singh, and L. Li, Prediction of Effective Thermal Conductivity of Porous Lattice Structures and Validation with Additively Manufactured Metal Foams, Appl. Therm. Eng., 2021, 25(187), p 116558.10.1016/j.applthermaleng.2021.116558 ↗
14. E. Cetin and C. Baykasoğlu, Crashworthiness of Graded Lattice Structure Filled Thin-Walled Tubes Under Multiple Impact Loadings, Thin Walled Struct., 2020, 1(154), p 106849.10.1016/j.tws.2020.106849 ↗
15. P.K. Kanaujia, M.A. Bin Ramezan, X.Y. Yap, Y. Song, Z. Du, C.L. Gan, Y.C. Lam, and C.Q. Lai, Mechanical Response of Lightweight Hollow Truss Metal Oxide Lattices, Materialia, 2019, 1(8), p 100439.10.1016/j.mtla.2019.100439 ↗
16. Z. Ozdemir, E. Hernandez-Nava, A. Tyas, J.A. Warren, S.D. Fay, R. Goodall, I. Todd, and H. Askes, Energy Absorption in Lattice Structures in Dynamics: Experiments, Int. J. Impact Eng, 2016, 1(89), p 49–61.10.1016/j.ijimpeng.2015.10.007 ↗
17. T. Maconachie, M. Leary, B. Lozanovski, X. Zhang, M. Qian, O. Faruque, and M. Brandt, SLM Lattice Structures: Properties, Performance, Applications and Challenges, Mater. Des., 2019, 5(183), p 108137.10.1016/j.matdes.2019.108137 ↗
18. C.T. Richard and T.H. Kwok, Analysis and Design of Lattice Structures for Rapid-Investment Casting, Materials, 2021, 14(17), p 4867.10.3390/ma14174867 ↗
19. I. Kroupová, M. Gawronová, P. Lichý, V. Merta, F. Radkovský, K. Janovská, I. Nguyenová, J. Beňo, T. Obzina, I. Vasková, and I. Lána, Preparation of Cast Metallic Foams with Irregular and Regular Inner Structure, Materials., 2021, 14(22), p 6989.10.3390/ma14226989 ↗
20. G. Singh and P.M. Pandey, Uniform and Graded Copper Open Cell Ordered Foams Fabricated by Rapid Manufacturing: Surface Morphology, Mechanical Properties and Energy Absorption Capacity, Mater. Sci. Eng. A, 2019, 22(761), p 138035.10.1016/j.msea.2019.138035 ↗
21. K. Hong, C. Kádár, M. Knapek, D. Drozdenko, P. Jenei, M.Y. Kim, H. Choe, K. Máthis, H. Park, and J. Gubicza, Comparison of Morphology and Compressive Deformation Behavior of Copper Foams Manufactured Via Freeze-Casting and Space-Holder Methods, J. Mater. Res. Technol., 2021, 1(15), p 6855–6865.10.1016/j.jmrt.2021.11.108 ↗
22. Z. Wang, H. Zhang, B. Dou, G. Zhang, W. Wu, and X. Zhou, Effect of Copper Metal Foam Proportion on Heat Transfer Enhancement in the Melting Process of Phase Change Materials, Appl. Therm. Eng., 2022, 25(201), p 117778.10.1016/j.applthermaleng.2021.117778 ↗
23. G. Singh and P.M. Pandey, Topological Ordered Copper Graphene Composite Foam: Fabrication and Compression Properties Study, Mater. Lett., 2019, 15(257), p 126712.10.1016/j.matlet.2019.126712 ↗
24. F. Yao, G. You, S. Zeng, K. Zhou, L. Peng, and Y. Ming, Fabrication, Microstructure, and Thermal Conductivity of Multilayered Cu mesh/AZ31 Mg Foil Composites, J. Mater. Res. Technol., 2021, 1(14), p 1539–1550.10.1016/j.jmrt.2021.07.042 ↗
25. D. Yang, S. Guo, J. Chen, J. Lu, L. Wang, J. Jiang, and A. Ma, Fabrication of Cu-Mg Alloy Foam with Close Pore Structure by Gas Release Reaction Powder Metallurgical Approach, J. Alloys Compd., 2018, 25(766), p 851–858.10.1016/j.jallcom.2018.06.365 ↗
26. P.L. Mao, Y.U. Bo, L.I. Zheng, W.A. Feng, and J.U. Yang, Mechanical Properties and Electronic Structures of MgCu2, Mg2Ca and MgZn2 Laves Phases by First Principles Calculations, Trans. Nonferrous Metals Soc. China., 2014, 24(9), p 2920–2929.10.1016/S1003-6326(14)63427-0 ↗
27. A.Y. Volkov, B.D. Antonov, E.I. Patrakov, E.G. Volkova, D.A. Komkova, A.A. Kalonov, and A.V. Glukhov, Abnormally High Strength and Low Electrical Resistivity of the Deformed Cu/Mg-Composite with a Big Number of Mg-Filaments, Mater. Des., 2020, 5(185), p 108276.10.1016/j.matdes.2019.108276 ↗
28. T. Xu, Y. Yang, X. Peng, J. Song, and F. Pan, Overview of Advancement and Development Trend on Magnesium Alloy, J. Magn. Alloys., 2019, 7(3), p 536–544.10.1016/j.jma.2019.08.001 ↗
29. A. Dey and K.M. Pandey, Magnesium Metal Matrix Composites-a Review, Rev. Adv. Mater. Sci., 2015, 42(1), p 58–67.
30. H. Kapłon, C. Blawert, J. Chęcmanowski, and K. Naplocha, Development of Open-Porosity Magnesium Foam Produced by Investment Casting, J. Magn. Alloys., 2022, 10(7), p 1941–1956.10.1016/j.jma.2022.01.003 ↗
31. N. Sezer, Z. Evis, S.M. Kayhan, A. Tahmasebifar, and M. Koç, Review of Magnesium-Based Biomaterials and their Applications, J. Magn. Alloys., 2018, 6(1), p 23–43.10.1016/j.jma.2018.02.003 ↗
32. J. Dai et al., Diffusion Behavior and Reactions Between Al and Ca in Mg Alloys by Diffusion Couples, J. mater. Sci. technol., 2018, 34(2), p 291–298.10.1016/j.jmst.2017.10.007 ↗
33. S.B. Budruk Abhijeet, and R.M. Gupta, Corrosion Behaviour of Mg-Cu and Mg-Mo Composites in 3.5% NaCl, Corros. Sci., 2008, 50(9), p 2423–2428.10.1016/j.corsci.2008.06.043 ↗
34. C. Ma, W. Yu, X. Pi, and A. Guitton, Study of Mg-Al-Ca magnesium alloy ameliorated with designed Al8Mn4Gd phase, J. Magn. Alloys., 2020, 8(4), p 1084–1089.10.1016/j.jma.2020.08.009 ↗
35. S. Sanyal, M. Paliwal, T.K. Bandyopadhyay, and S. Mandal, Evolution of Microstructure, Phases and Mechanical Properties in Lean as-Cast Mg-Al-Ca-Mn Alloys Under the Influence of a Wide Range of Ca/Al Ratio, Mater. Sci. Eng. A, 2021, 7(800), p 140322.10.1016/j.msea.2020.140322 ↗
36. H. Nie, W. Liang, H. Chen, L. Zheng, C. Chi, and X. Li, Effect of Annealing on the Microstructures and Mechanical Properties of Al/Mg/Al Laminates, Mater. Sci. Eng. A, 2018, 8(732), p 6–13.10.1016/j.msea.2018.06.065 ↗
37. Q. Huang, Y. Liu, M. Tong, H. Pan, C. Yang, T. Luo, and Y. Yang, Enhancing Tensile Strength of Mg-Al-Ca Wrought Alloys by Increasing Ca Concentration, Vacuum, 2020, 1(177), p 109356.10.1016/j.vacuum.2020.109356 ↗
38. X. Yan et al., Corrosion and Biological Performance of Biodegradable Magnesium Alloys Mediated by Low Copper Addition and Processing, Mater. Sci. Eng. C Mater. Biol. Appl., 2018, 93, p 565–581.10.1016/j.msec.2018.08.013 ↗
39. X. Yan, P. Wan, L. Chen, L. Tan, X. Xu, and K. Yang, Microstructural Effects on Mechanical Properties and Degradation Behavior of Mg-Cu Alloy, Materialia., 2021, 1(16), p 101089.10.1016/j.mtla.2021.101089 ↗
40. K.B. Nie, X.J. Wang, K.K. Deng, X.S. Hu, and K. Wu, Magnesium Matrix Composite Reinforced by Nanoparticles—a Review, J. Magn. Alloys., 2021, 9(1), p 57–77.10.1016/j.jma.2020.08.018 ↗
41. K. Tanaka, D. Nishino, K. Hayashi, S. Ikeuchi, R. Kondo, and H.T. Takeshita, Formation of Mg2Cu at Low Temperature in Mg/Cu Super-Laminate Composites During Initial Hydrogenation, Int. J. Hydrog. Energy, 2017, 42(35), p 22502–22510.10.1016/j.ijhydene.2017.02.193 ↗
42. A.Y. Volkov, D.A. Komkova, and A.A. Kalonov, Cu/Mg-Composites: Processing, Structure and Properties, Письма о материалах., 2019, 9(4), p 517–522.
43. D.X. Xu, C.L. Yang, K.N. Zhao, H.X. Li, and J.S. Zhang, Interfacial Microstructure and Mechanical Behavior of Mg/Cu Bimetal Composites Fabricated by Compound Casting Process, Trans. Nonferr. Metals Soc. China., 2019, 29(6), p 1233–1241.10.1016/S1003-6326(19)65030-2 ↗
44. X. Li, M. Ghasri-Khouzani, A.A. Bogno, J. Liu, H. Henein, Z. Chen, and A.J. Qureshi, Investigation of Compressive and Tensile Behavior of Stainless Steel/Dissolvable Aluminum Bimetallic Composites by Finite Element Modeling and Digital Image Correlation, Materials., 2021, 14(13), p 3654.10.3390/ma14133654 ↗
45. S. Rohani Nejad, M. Hosseinpour, and S.M. Mirbagheri, Experimental and Simulation Investigation on Energy Absorption of Cu Casting Lattice Structure during Compression, Adv. Eng. Mater., 2023, 25(16), p 2300447.10.1002/adem.202300447 ↗
46. ISO, ISO 13314—Mechanical Testing of Metals—Ductility Testing—Compression Test for Porous and Cellular Metals. (2011).
47. International, A., Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature. (2009).
48. S. Rohani Nejad, M. Hosseinpour, and S.M. Mirbagheri, Investigation of Energy Absorption Behavior of Light Sandwich Panel with Nickel/Polymer Open-Cell Foam Core during Compression, Adv. Eng. Mater., 2022, 24(12), p 2200663.10.1002/adem.202200663 ↗
49. V. Raghavan, Al-Ca-Mg (Aluminum-Calcium-Magnesium), J. Phase Equilib. Diffus., 2009, 30(3), p 260–264.10.1007/s11669-009-9515-0 ↗
50. A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock, Solidification Paths and Eutectic Intermetallic Phases in Mg-Al-Ca Ternary Alloys, Acta Mater., 2005, 53(9), p 2823–2834.10.1016/j.actamat.2005.03.001 ↗
51. J. Dai, B. Jiang, J. Zhang, Q. Yang, Z. Jiang, H. Dong, and F. Pan, Diffusion Kinetics in Mg-Cu Binary System, J. Phase Equilib. Diffus., 2015, 36, p 613–619.10.1007/s11669-015-0417-z ↗