Effect of In2O3 Additive Size on the Mechanical Behavior of Densified Ag-SnO2 Contact Materials
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Electrical Contact Performance and Analysis · Electronic Packaging and Soldering Technologies · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. J.H. Chen, S. Chen, M. Xie, J.Q. Hu, and S.B. Wang, High-speed imaging observation on molten bridges of AgNi10 electrical contact material, Rare Met., 2023, 42, p 336–345.10.1007/s12598-017-0911-z ↗
2. X. Zhang, W. Ren, Z. Zheng, and S.J. Wang, Effect of electrical load on contact welding failure of silver tin oxide material used in DC electromechanical relays, IEEE Access, 2019, 7, p 133079–133089.10.1109/ACCESS.2019.2940966 ↗
3. M.T. Kesim, H. Yu, Y. Sun, M. Aindow, and S.P. Alpay, Corrosion, oxidation, erosion and performance of Ag/W-based circuit breaker contacts: A review, Corros. Sci., 2018, 135, p 12–34.10.1016/j.corsci.2018.02.010 ↗
4. H. Cinaroglu, V. Behrens, and T. Honig, Application of a new Ag/SnO2 contact material in AC-contactors, in 2017 IEEE Holm Conference on Electrical Contacts, (IEEE, 2017), p 215-220.10.1109/HOLM.2017.8088089 ↗
5. A. Kalkanli and Ş Güven, Improvement and metallurgy of current-related heating problem of circuit breakers made of AgSnO2 and AgCdO, Int. J. Mater. Res., 2022, 113, p 599–613.10.1515/ijmr-2021-8314 ↗
6. S. Liu, Q. Sun, J. Wang, M. Guo, and H. Hou, Exploration of the influence mechanism of La doping on the arc erosion resistance of Ag/SnO2 contact materials by a laser-simulated arc, J. Mater. Eng. Perform., 2021, 30, p 7577–7583.10.1007/s11665-021-05966-z ↗
7. R. Landfried, M. Boukhlifa, F. Houzé, T. Leblanc, and P. Testé, Determination of the power balance for thin Ag-SnO2 electrodes submitted to an electric arc based on IR thermography, IEEE T. Comp. Pack. Man., 2022, 12, p 1618–1626.
8. P. Chen and Y. Wang, Improved arc erosion resistance of Ag/SnO2 composites fabricated by Ag melt-infiltration in the SnO2 skeleton, Mater. Lett., 2022, 310, p 131520.10.1016/j.matlet.2021.131520 ↗
9. Z. Lin, Y. Liang, Y. Zeng, X. Chen, M. Liu, P. Dai, J. Chen, and X. Sun, Morphology-tunable synthesis and formation mechanism of SnO2 particles and their application in Ag-SnO2 electrical contact materials, Ceram. Int., 2022, 48, p 6052–6061.10.1016/j.ceramint.2021.11.143 ↗
10. Y.C. Zhu, J.Q. Wang, and H.T. Wang, Preparation and study on nano-Ag/SnO2 electrical contact material doped rare earth element, Mater. Sci. Forum, 2014, 789, p 270–274.10.4028/www.scientific.net/MSF.789.270 ↗
11. V. Ćosović, A. Ćosović, N. Talijan, D. Živković, D. Manasijević, and D. Minić, Improving dispersion of SnO2 nanoparticles in Ag-SnO2 electrical contact materials using template method, J. Alloys Compd., 2013, 567, p 33–39.10.1016/j.jallcom.2013.03.094 ↗
12. J. Wang, H. Zhao, J. Wang, C. Fu, and Y. Chang, Effect of CuO additives on the formation of SnO2-rich layers in Ag-SnO2 materials, J. Alloys Compd., 2019, 770, p 920–925.10.1016/j.jallcom.2018.08.159 ↗
13. M. Cao, Y. Feng, L. Wang, T. Zhao, H. Zhao, and Z. Zhou, Effect of La2Sn2O7 content on Ag-La2Sn2O7/SnO2 arc erosion behavior and mechanism, J. Rare Earth., 2022, 40, p 1488–1498.10.1016/j.jre.2021.08.003 ↗
14. X. Zhou, L. Chen, M. Liu, J. Yu, D. Xiong, Z. Zheng, and L. Wang, Effects of NiO content on the microstructure and mechanical properties of AgSnO2NiO composites, Sci. Eng. Compos. Mater., 2019, 26, p 221–229.10.1515/secm-2019-0005 ↗
15. G. Li, Y. Ma, W. Feng, C. Zhang, Z. Yan, X. Fang, and R. Tian, Effects of the CuO additive nanoparticles on the internal strain homogenization and microstructure evolution in Ag-SnO2 composites, Mater Charact, 2022, 192, p 112212.10.1016/j.matchar.2022.112212 ↗
16. H. Wang, Z. Wang, L. Wang, J. Wang, and Y. Zhu, Effect of sintering temperature on the physical properties and electrical contact properties of doped AgSnO2 contact materials, Int. J. Min. Met. Mater., 2018, 25, p 1275–1285.10.1007/s12613-018-1680-x ↗
17. S.P. Kumar, S.M. Senthil, R. Parameshwaran, and R. Rathanasamy, Fabrication of a novel silver-based electrical contact composites and assessment of its mechanical and electrical properties, Arch. Metall. Mater., 2021, 66, p 1087–1094.10.24425/amm.2021.136428 ↗
18. J. Li, M. Yang, and X. Zhou, Characterization/mechanical behavior of AgCuOSnO2 composites: experimental and finite element study, Polym. Composite., 2021, 42, p 5721–5730.10.1002/pc.26254 ↗
19. G. Li, T. Yang, Y. Ma, W. Feng, X. Zhang, and X. Fang, The effects of oxide additives on the mechanical characteristics of Ag-SnO2 electrical contact materials, Ceram. Int., 2020, 46, p 4897–4906.10.1016/j.ceramint.2019.10.226 ↗
20. C. Mu, T. Shen, H. Yang, X. Chen, G. Qi, and X. Wu, Investigation of the microstructure and electrical performance of Ag/SnO2In2O3 contacts with nickel addition fabricated by internal oxidation, J. Electron. Mater., 2022, 51, p 4918–4937.10.1007/s11664-022-09717-1 ↗
21. J. Chen, H. Jia, G. Zhu, S. Chen, and A. Li, Observation on AgSnO2In2O3 molten bridge phenomena under different currents, Indian J. Eng Mater., 2017, 24, p 369–376.
22. L. Yi and N. Lu, Evaluation and comparison of the arc erosion characteristic of Ag/SnO2/In2O3 contact materials used for an automotive relay, in 2018 IEEE Holm Conference on Electrical Contacts (IEEE, 2018), pp. 387–39310.1109/HOLM.2018.8611673 ↗
23. B. Kubicki, Stress concentration at pores in sintered materials, Powder Metall., 1995, 38, p 295–298.10.1179/pom.1995.38.4.295 ↗
24. F. Heringhaus, J. Beuers, P. Braumann, B. Kempf, A. Koffler, E. Susnik, and R. Wolmer, On the optimization of the microstructure in powder metallurgical Ag-SnO2-In2O3 contact materials, Int. J. Mater. Res., 2022, 92, p 784–787.10.1515/ijmr-2001-0144 ↗
25. J. Zhang, C. Mu, T. Shen, and G. Qi, Study on the milling processes and sintering properties of Ag/SnO2 electrical contact material with different micro-structured SnO2 powders, J. Sol-Gel Sci. Technol., 2023, 106, p 444–454.10.1007/s10971-022-05930-w ↗
26. H. Li, X. Wang, Y. Liang, Z. Hu, and X. Guo, Fabrication and characterization of Ag-4wt.% TiB2-4wt.% Ni contact materials utilizing coarse and ultrafine Ag powders, Vacuum, 2020, 182, p 109756.10.1016/j.vacuum.2020.109756 ↗
27. Y.F. Chen, X.F. Yan, X.P. Bai, M.J. Zhang, J. Li, C.L. Yang, and X.F. Zhang, Research on the influence of different oxide particles on properties of AgCdO contact material, J. Phys. Conf. Ser., 2021, 1948, p 012192.10.1088/1742-6596/1948/1/012192 ↗
28. H. Li, X. Wang, Y. Liu, and X. Guo, Effect of strengthening phase on material transfer behavior of Ag-based contact materials under different voltages, Vacuum, 2017, 135, p 55–65.10.1016/j.vacuum.2016.10.031 ↗
29. H. Wang, M. Zhang, M. Yang, J. Wang, and Y. Zhu, Properties of doped Ag-SnO2 electrical contact materials with different SnO2 particle sizes, Mate. Res. Express., 2018, 6, p 016558.10.1088/2053-1591/aae8fa ↗
30. Z.J. Lin, X.D. Sun, S.H. Liu, J. Chen, M. Xie, J.G. Li, X.D. Li, D. Huo, M. Zhang, and Q. Zhu, Effect of SnO2 particle size on properties of Ag-SnO2 electrical contact materials prepared by the reductive precipitation method, Adv. Mater. Res., 2014, 936, p 459–463.10.4028/www.scientific.net/AMR.936.459 ↗
31. M. Zhang, X. Wang, X. Yang, J. Zou, and S. Liang, Arc erosion behaviors of AgSnO2 contact materials prepared with different SnO2 particle sizes, T. Nonferr. Metal. Soc. China, 2016, 26, p 783–790.10.1016/S1003-6326(16)64168-7 ↗
32. H. Wang, S. Zheng, and M. Zhang, Study on the improvement of the performance of AgSnO2 contact material for low-voltage electrical apparatus with additive particle size, IEEJ T. Electr. Electr., 2022, 17, p 1388–1395.10.1002/tee.23649 ↗
33. H. Wang, M. Zhang, and M. Yang, Properties of Ag-SnO2 contact materials for low-voltage electrical appliances with different doped particle sizes, Adv. Mater. Sci. Eng., 2019, 2019, p 1–9.
34. G. Xu, Q. Wu, R. Huang, L. Yu, M. Yuan, and C. Wu, Influence of oxidant and sample state on oxides distribution of Ag-4.93Sn-3.56In alloy powders, J. Alloys Compd., 2023, 935, p 168092.10.1016/j.jallcom.2022.168092 ↗
35. H. Cao, Z. Luo, C. Wang, J. Wang, T. Hu, L. Xiao, and J. Che, The stress concentration mechanism of pores affecting the tensile properties in vacuum die casting metals, Materials, 2020, 13, p 3019.10.3390/ma13133019 ↗
36. X. Yang, Q. Hu, W. Li, H. Song, T. Zou, R. Zong, J. Sha, C. He, and N. Zhao, Compression-compression fatigue performance of aluminium matrix composite foams reinforced by carbon nanotubes, Fatigue Fract. Eng. Mater. Struct., 2020, 43, p 744–756.10.1111/ffe.13159 ↗
37. S. Queyreau, G. Monnet, and B. Devincre, Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations, Acta Mater., 2010, 57, p 5586–5595.10.1016/j.actamat.2010.06.028 ↗
38. K.R. Kumar, K. Kiran, and V.S. Sreebalaji, Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide, J. Alloys Compd., 2017, 723, p 795–801.10.1016/j.jallcom.2017.06.309 ↗
39. M. Rong, J. Wan, and Q. Wang, Erosion mechanism of AgSnO2 contact material with different dopants, J. Xian Jiaotong Univ., 1997, 31, p 1–7.
40. D. Qi, G. Li, X. Han, X. Fang, W. Feng, and R. Tian, Effect of the in-situformed CuO additive on the fracture behaviour and failure mechanism of Ag/SnO2 composites, Eng. Fact. Mech., 2023, 284, p 109240.