Coupling Effects of Biomimetic Texture with Solid Lubricants to Improve Tribological Properties of TC4 under Dry Sliding Conditions
Source abstract
Abstract
Inspired by the scales on the surface of crucian carp, the biomimetic fan-shaped textures were designed and prepared on the TC4 contact surface and filled with solid lubricant SnAgCu-Nb2C (SACN). The coupling effects of fan-shaped textures and solid lubricants on the tribological properties of TC4 under variable frequency conditions were investigated. The results indicated that the fan-shaped textures could promote the precipitation of lubricants and provide sufficient lubricants for the worn surface, forming a uniform lubricating film on the worn surface, thus improving the tribological properties. In addition, at the low-frequency stage, the coupling of lubricants and textures had strong adaptability to frequency changes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. M. Qiu, J.J. Lu, Y.C. Li, and G.S. Lv, Investigation on MoS2 and Graphite Coatings and Their Effects on the Tribological Properties of the Radial Spherical Plain Bearings, Chinse J. Mech. Eng., 2016, 29(4), p 844–852.10.3901/CJME.2016.0331.043 ↗
2. A. Germaneau, F. Peyruseigt, S. Mistou, P. Doumalin, and J.-C. Dupré, 3D Mechanical Analysis of Aeronautical Plain Bearings: Validation of a Finite Element Model from Measurement of Displacement Fields by Digital Volume Correlation and Optical Scanning Tomography, Opt. Lasers Eng., 2010, 48(6), p 676–683.10.1016/j.optlaseng.2010.01.010 ↗
3. Y.F. Liu, G.Z. Ma, L.N. Zhu, H.P. Wang, C.H. Han, Z. Li, H.D. Wang, Q.S. Yong, and Y.F. Huang, Structure–Performance Evolution Mechanism of the Wear Failure Process of Coated Spherical Plain Bearings, Eng. Fail. Anal., 2022, 135, p 106097.10.1016/j.engfailanal.2022.106097 ↗
4. A. Vadiraj, M. Abraham,, and A. Bharadwaj, Trends in Automotive Light Weighting, Light Weighting for Defense, Aerospace, and Transportation, 2019, p 89-102.10.1007/978-981-15-1263-6_7 ↗
5. X.Q. Fan, H.M. Fu, W. Li, and M. Zhu, Exploring Lubrication Function of MACs Greases for TC4 Alloy Under Sliding and Fretting Conditions, Tribol. Lett., 2018, 66(4), p 135.10.1007/s11249-018-1091-1 ↗
6. P.P. Lu, M.P. Wu, and X.J. Liu, Effects of Laser Power on Micro-Structure and Tribological Properties of SLMed GO/TC4 Nanocomposites, JOM, 2020, 72(12), p 4486–4494.10.1007/s11837-020-04262-w ↗
7. M. Kaminski, P. Budzynski, M. Wiertel, and A. Drozdziel, Use of Nitrogen ion Implantation for Modification of the Tribological Properties of Titanium Alloy Ti6Al4V, Mater. Sci. Eng., 2018, 421(3), p 032013.
8. G.H. Zhou, H.Y. Ding, Y. Zhang, A.H. Liu, Y.B. Lin, and Y.F. Zhu, Fretting Wear Study on Micro-Arc Oxidation TiO2 Coating on TC4 Titanium Alloys in Simulated Body Fluid, Tribol. Lett., 2010, 40, p 319–326.10.1007/s11249-010-9665-6 ↗
9. X.S. Zhu, Y.D. Fu, Z.F. Li, and K. Leng, Wear Resistance of TC4 by Deformation Accelerated Plasma Nitriding at 400 °C, J. Cent. South Univ., 2016, 23, p 2771–2776.10.1007/s11771-016-3339-y ↗
10. C.W. Chan, S. Lee, G. Smith, G. Sarri, C.H. Ng, A. Sharba, and H.C. Man, Enhancement of Wear and Corrosion Resistance of Beta Titanium Alloy by Laser Gas Alloying with Nitrogen, Appl. Surf. Sci., 2016, 367, p 80–90.10.1016/j.apsusc.2016.01.091 ↗
11. S. Attabi, M. Mokhtari, Y. Taibi, I. Abdel-Rahman, B. Hafez, and H. Elmsellem, Electrochemical and Tribological Behavior of Surface-Treated Titanium Alloy Ti-6Al-4V, J. Bio-Tribo-Corros., 2019, 5, p 2.10.1007/s40735-018-0193-5 ↗
12. W. Pawlak, K.J. Kubiak, B.G. Wendler, and T.G. Mathia, Wear Resistant Multilayer Nanocomposite WC1−x/C Coating on Ti–6Al–4V Titanium Alloy, Tribol. Int., 2015, 82, p 400–440.10.1016/j.triboint.2014.05.030 ↗
13. G. Shen, J.F. Zhang, C.W. Kang, and F.Z. Fang, Study on Surface Texture Patterns for Improving Tribological Performance of Bioimplants, Surf. Coat. Technol., 2021, 422, p 127567.10.1016/j.surfcoat.2021.127567 ↗
14. Q.P. Huang, X.L. Shi, Y.W. Xue, K.P. Zhang, and C.H. Wu, Recent progress on Surface Texturing and Solid Lubricants in Tribology: Designs, Properties, and Mechanisms, Mater. Today Commun., 2023, 35, p 105854.10.1016/j.mtcomm.2023.105854 ↗
15. C. Liu, Y.J. Lu, Y.F. Zhang, L.J. Tang, C. Guo, and N. Müller, Investigation on the Frictional Performance of Surface Textured Ring-Deformed Liner Conjunction in Internal Combustion Engines, Energies, 2019, 12(14), p 2761.10.3390/en12142761 ↗
16. J.B. Jiang, W.J. Zhao, X.D. Peng, and J.Y. Li, A Novel Design for Discrete Surface Texture on Gas Face Seals Based on a Superposed Groove Model, Tribol. Int., 2020, 147, p 106269.10.1016/j.triboint.2020.106269 ↗
17. I. Etsion, Y. Kligerman, and G. Halperin, Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces, Tribol. Trans., 1999, 42, p 511–516.10.1080/10402009908982248 ↗
18. H. Tomizawa and T.E. Fischer, Friction and Wear of Silicon Nitride and Silicon Carbide in Water: Hydrodynamic Lubrication at Low Sliding Speed Obtained by Tribochemical Wear, Tribol. Trans., 1987, 30, p 41–46.
19. D. Gropper, L. Wang, and T.J. Harvey, Hydrodynamic Lubrication of Textured Surfaces: A Review of Modeling Techniques and Key Findings, Tribol. Int., 2016, 94, p 509–529.10.1016/j.triboint.2015.10.009 ↗
20. W.Z. Zhai, Y.J. Zhao, R.H. Zhou, W.L. Lu, W.C. Zhai, X.J. Liu, L.P. Zhou, and S.P. Chang, Additively Manufactured (Fe, Ni) Al-Reinforced Nickel Aluminum Bronze with Nearly-Isotropic Mechanical Properties in Build and Transverse Directions, Mater. Charact., 2022, 184, p 111706.10.1016/j.matchar.2021.111706 ↗
21. G. Ryk, Y. Kligerman, I. Etsion, and A. Shinkarenko, Experimental Investigation of Partial Laser Surface Texturing for Piston-Ring Friction Reduction, Tribol. Trans., 2005, 48(4), p 583–588.10.1080/05698190500313544 ↗
22. S.P. Joshua and P.D. Babu, Frction and Wear Characteristics for Laser Surface Textured Rolling Bearing Steel: Effect of Pattern Density, Depth, and Area, Trans. Indian Inst. Met., 2022, 75, p 2923–2930.10.1007/s12666-022-02641-2 ↗
23. K. Miyoshi, Solid Lubricants, Encyclopedia of Tribology, 2013, p 3159-3165.10.1007/978-0-387-92897-5_933 ↗
24. T.W. Scharf and S.V. Prasad, Solid Lubricants: A Review, J. Mater. Sci., 2013, 48, p 511–531.10.1007/s10853-012-7038-2 ↗
25. C. Gachot, A. Rosenkranz, S.M. Hsu, and H.L. Costa, A Critical Assessment of Surface Texturing for Friction and Wear Improvement, Wear, 2017, 372, p 21–41.10.1016/j.wear.2016.11.020 ↗
26. K. Holmberg, A. Matthews, and H. Ronkainen, Coatings Tribology-Contact Mechanisms and Surface Design, Tribol. Int., 1998, 31(1–3), p 107–120.10.1016/S0301-679X(98)00013-9 ↗
27. T.C. Hu, L.T. Hu, and Q. Ding, Effective Solution for the Tribological Problems of Ti-6Al-4V: Combination of Laser Surface Texturing and Solid Lubricant Film, Surf. Coat. Technol., 2012, 206(24), p 5060–5066.10.1016/j.surfcoat.2012.06.014 ↗
28. R. Meng, J.X. Deng, R. Duan, Y.Y. Liu, and G.L. Zhang, Modifying Tribological Performances of AISI 316 Stainless Steel Surfaces by Laser Surface Texturing and Various Solid Lubricants, Opt. Laser Technol., 2019, 109, p 401–411.10.1016/j.optlastec.2018.08.020 ↗
29. X.F. Li, Z.W. Guo, Q.R. Huang, and C.Q. Yuan, Application of Bionic Tribology in Water-Lubricated Bearing: A Review, J. Bionic Eng., 2022, 19, p 902–934.10.1007/s42235-022-00177-1 ↗
30. Z.D. Dai, J. Tong, and L.Q. Ren, Researches and Developments of Biomimetics in Tribology, Chin. Sci. Bull., 2006, 51, p 2681–2689.10.1007/s11434-006-2184-z ↗
31. H. Pang, H. Zhang, R. Zhang, W.C. Dong, T. Li, S.S. Ma, and J.Q. Li, Design of the Bionic Wheel Surface Based on the Friction Characteristics of Ostrich Planta, Rendiconti Lincei. Scienze Fisiche e Naturali, 2021, 32(1), p 191–203.10.1007/s12210-020-00967-x ↗
32. Z.L. Dou, J.D. Wang, and D.R. Chen, Bionic Research on Fish Scales for Drag Reduction, J. Bionic Eng., 2012, 9(4), p 457–464.10.1016/S1672-6529(11)60140-6 ↗
33. Q.P. Huang, X.L. Shi, Y.W. Xue, K.P. Zhang, and C.H. Wu, Synergetic Lubricating Performance of M50-SnAgCu-Nb2C Bionic Composites Fabricated by Laser Additive Manufacturing under Oil Lubrication, J. Mater. Eng. Perform., 2022, 31, p 139–151.10.1007/s11665-021-06195-0 ↗
34. A. Rosenkranz and M. Marian, Combining Surface Textures and MXene Coatings-Towards Enhanced Wear-Resistance and Durability, Surf. Topogr. Metrol. Prop., 2022, 10(3), p 033001.10.1088/2051-672X/ac7f4a ↗
35. H. Cheng and W.J. Zhao, Regulating the Nb2C Nanosheets with Different Degrees of Oxidation in Water Lubricated Sliding Toward an Excellent Tribological Performance, Friction, 2022, 10(3), p 398–410.10.1007/s40544-020-0469-x ↗