On the Fabrication of Functionally Graded Prototypes with Laser Powder Bed Fusion from Reused Ni-625 and 17-4 PH Stainless Steel Powder
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. B. Chen, S.K. Moon, X. Yao, G. Bi, J. Shen, J. Umeda, and K. Kondoh, Strength and Strain Hardening of a Selective Laser Melted AlSi10Mg Alloy, Scrip Mater., 2017, 141, p 45–49.10.1016/j.scriptamat.2017.07.025 ↗
2. Y. Bai, Y. Yang, D. Wang, and M. Zhang, Influence Mechanism of Parameters Process and Mechanical Properties Evolution Mechanism of Maraging Steel 300 by Selective Laser Melting, Mater. Sci. Eng. A, 2017, 703, p 116–123.10.1016/j.msea.2017.06.033 ↗
3. D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann, Additive Manufacturing of Metals, Act Mater., 2016, 117, p 371–392.10.1016/j.actamat.2016.07.019 ↗
4. C. Pleass and S. Jothi, Influence of Powder Characteristics and Additive Manufacturing Process Parameters on the Microstructure and Mechanical Behaviour of Inconel 625 Fabricated by Selective Laser Melting, Addit. Manuf.. Manuf., 2018, 24, p 419–431.
5. J. Strößner, M. Terock, and U. Glatzel, Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM), Adv. Eng. Mater., 2015, 17(8), p 1099–1105.10.1002/adem.201500158 ↗
6. S. Saedi, A.S. Turabi, M.T. Andani, N.S. Moghaddam, M. Elahinia, and H.E. Karaca, Texture, Aging, and Superelasticity of Selective Laser Melting Fabricated Ni-rich NiTi Alloys, Mater. Sci. Eng. A, 2017, 686, p 1.10.1016/j.msea.2017.01.008 ↗
7. C. Li, Y.B. Guo, and J.B. Zhao, Interfacial Phenomena and Characteristics Between the Deposited Material and Substrate in Selective Laser Melting Inconel 625, J. Mater. Proc. Tech., 2017, 243, p 269–281.10.1016/j.jmatprotec.2016.12.033 ↗
8. C. Li, R. White, X.Y. Fang, M. Weaver, and Y.B. Guo, Microstructure Evolution Characteristics of Inconel 625 Alloy from Selective Laser Melting to Heat Treatment, Mater. Sci. Eng. A, 2017, 705, p 20–31.10.1016/j.msea.2017.08.058 ↗
9. C. Qiu, H. Chen, Q. Liu, S. Yue, and H. Wang, On the Solidification Behaviour and Cracking Origin of a Nickel-Based Superalloy During Selective Laser Melting, Mater Charact, 2019, 148, p 330–344.10.1016/j.matchar.2018.12.032 ↗
10. L.N. Carter, X. Wang, N. Read, R. Khan, M. Aristizabal, K. Essa, and M.M. Attallah, Process Optimization of Selective Laser Melting Using Energy Density Model for Nickel-Based Superalloys, Mater. Sci. Tech., 2016, 32(7), p 657–661.10.1179/1743284715Y.0000000108 ↗
11. H. Joo, J. Woo, Y. Sohn, and K.A. Lee, Effect of Process Stopping and Restarting on the Microstructure and Local Property of 316L Stainless Steel Manufactured by Selective Laser Melting Process, J. Powder Mater., 2022, 29(1), p 1–7.10.4150/KPMI.2022.29.1.1 ↗
12. A. Hinojos, J. Mireles, A. Reichardt, P. Frigola, P. Hosemann, L.E. Murr, and R.B. Wicker, Joining of Inconel 718 and 316 Stainless Steel Using Electron Beam Melting Additive Manufacturing Technology, Mater. Des., 2016, 94, p 17–27.10.1016/j.matdes.2016.01.041 ↗
13. G.R. Joshi and V.J. Badheka, Processing of Bimetallic Steel-Copper Joint by Laser Beam Welding, Mater. Manuf. Process., 2019, 34(11), p 1232–1242.10.1080/10426914.2019.1628262 ↗
14. B.E. Carroll, R.A. Otis, J.P. Borgonia, J.O. Suh, R.P. Dillon, A.A. Shapiro, D.C. Hofmann, Z.K. Liu, and A.M. Beese, Functionally Graded Material of 304L Stainless Steel and Inconel 625 Fabricated by Directed Energy Deposition: Characterization and Thermodynamic Modelling, Act Mater., 2016, 108, p 46–54.10.1016/j.actamat.2016.02.019 ↗
15. U.E. Klotz, M.B. Henderson, I.M. Wilcock, S. Davies, P. Janschek, M. Roth, P. Gasser, and G. McColvin, Manufacture and Microstructural Characterization of Bimetallic Gas Turbine Discs, Mater. Sci. Tech., 2005, 21(2), p 218–224.10.1179/174328405X18629 ↗
16. F. Xu, Y. Lv, Y. Liu, F. Shu, P. He, and B. Xu, Microstructural Evolution and Mechanical Properties of Inconel 625 alloy During Pulsed Plasma Arc Deposition Process, J. Mater. Sci. Tech., 2013, 29(5), p 480–488.10.1016/j.jmst.2013.02.010 ↗
17. K.D. Ramkumar, W.S. Abraham, V. Viyash, N. Arivazhagan, and A.M. Rabel, Investigations on the Microstructure, Tensile Strength and High-Temperature Corrosion Behaviour of Inconel 625 and Inconel 718 Dissimilar Joints, J. Manuf. Proc., 2017, 25, p 306–322.10.1016/j.jmapro.2016.12.018 ↗
18. Ö. Özgün, H.Ö. Gülsoy, R. Yilmaz, and F. Findik, Injection Molding of Nickel-Based 625 Superalloy: Sintering, Heat Treatment, Microstructure and Mechanical Properties, J. Alloy. Compd., 2013, 546, p 192–207.10.1016/j.jallcom.2012.08.069 ↗
19. J. Hunt, F. Derguti, and I. Todd, Selection of Steels Suitable for Additive Layer Manufacturing, Ironmak. Steelmak., 2014, 41(4), p 254–256.10.1179/0301923314Z.000000000269 ↗
20. X. Lin, Y. Cao, X. Wu, H. Yang, J. Chen, and W. Huang, Microstructure and Mechanical Properties of Laser Forming Repaired 17–4PH Stainless Steel, Mater. Sci. Eng. A, 2012, 553, p 80–88.10.1016/j.msea.2012.05.095 ↗
21. Y. Wu, R.M. German, D. Blaine, B. Marx, and C. Schlaefer, Effects of Residual Carbon Content on Sintering Shrinkage, Microstructure and Mechanical Properties of Injection Molded 17–4 PH Stainless Steel, J. Mater. Sci., 2002, 37, p 3573–3583.10.1023/A:1016532418920 ↗
22. Y. Abe, T. Kurose, M.V. Santos, Y. Kanaya, A. Ishigami, S. Tanaka, and H. Ito, Effect of Layer Directions on Internal Structures and Tensile Properties of 17–4PH Stainless Steel Parts Fabricated by Fused Deposition of Metals, Materials, 2021, 14(2), p 243.10.3390/ma14020243 ↗
23. S. Shen, X. Li, P. Zhang, Y. Nan, G. Yang, and X. Song, Effect of Solution-Treated Temperature on Hydrogen Embrittlement of 17–4 PH Stainless Steel, Mater. Sci. Eng. A, 2017, 703, p 413–421.10.1016/j.msea.2017.06.078 ↗
24. I. Mutlu and E. Oktay, Biocompatibility of 17–4 PH Stainless Steel Foam for Implant Applications, Bio-Med. Mater. Eng., 2011, 21(4), p 223–233.10.3233/BME-2011-0671 ↗
25. S. Giganto, S. Martínez-Pellitero, J. Barreiro, and P. Zapico, Influence of 17–4 PH Stainless Steel Powder Recycling on Properties of SLM Additive Manufactured Parts, J. Mater. Res. Technol., 2022, 16, p 1647–1658.10.1016/j.jmrt.2021.12.089 ↗
26. H.P. Tang, M. Qian, N. Liu, X.Z. Zhang, G.Y. Yang, and J. Wang, Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting, Jom, 2015, 67(3), p 555–563.10.1007/s11837-015-1300-4 ↗
27. B. Kalia, R. Singh, B.S. Pabla, and M. Dureja, On Direct Metal Laser Sintering of Functionally Graded Material with Virgin and Mixed Powder, Arab. J. Sci. Eng., 2024, 49(8), p 11857–11870.10.1007/s13369-023-08347-x ↗
28. B. Kalia, M. Husain, R. Singh, and B.S. Pabla, On the Use of 17–4 Precipitate Hardened Stainless Steel Waste Powder for 3D Printing of Implants with Tuneable Stress Shielding Capabilities, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-10143-z10.1007/s11665-024-10143-z ↗
29. J. Maya, K. Sivaprasad, B. Ravisankar, and K.G. Prashanth, Wear Behavior of Selective Laser Melted 06Cr15Ni4CuMo Steel, Trans. Ind. Inst. Met., 2024, 77, p 1795–1804.10.1007/s12666-023-03216-5 ↗
30. R. Singh, S. Kumar, S.S. Banwait, and M.V. Singh, Effect of Preprocessing Temperature on the Recycling of waste Direct Metal Laser Sintering Powder, Trans. Ind. Inst. Met., 2024, 77(11), p 3487–3497.10.1007/s12666-024-03402-z ↗
31. J Pou, A Riveiro, JP Davim (ed.), Additive Manufacturing, Elsevier, 2021, DoI: https://doi.org/10.1016/C2018-0-00910-X10.1016/C2018-0-00910-X ↗
32. J. Paulo Davim (ed.), Laser in Manufacturing, John Wiley and Sons, 2012. ISBN: 978-1-848-21369-2
33. J.P. Davim, Sustainable and Intelligent Manufacturing: PERCEPTIONS in Line with 2030 Agenda of Sustainable Development, BioResources, 2024, 19(1), p 4–5.10.15376/biores.19.1.4-5 ↗
34. J.P. Davim, Manufacturing: a Bibliometric Analysis, Int. J. Manuf., Mater., Mech. Eng., 2024, 13(1), p 1–4. https://doi.org/10.4018/IJMMME.36071010.4018/IJMMME.360710 ↗
35. JP Davim, Materials and Manufacturing Engineering: A Bibliometric Analysis, Mari Papel Y Corrugado, 2024, pp 57-58