Effect of Raster Orientation and Fiber Volume Fraction on 3D-Printed Continuous Basalt Fiber-Reinforced Polylactic Acid Composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. F.D. Siacor, Q. Chen, J.Y. Zhao, L. Han, A.D. Valino, E.B. Taboada, E.B. Caldona, and R.C. Advincula, On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing, Addit. Manuf.. Manuf., 2021, 45, p 102043. https://doi.org/10.1016/J.ADDMA.2021.10204310.1016/J.ADDMA.2021.102043 ↗
2. H. Singh, R.S. Ambekar, D. Das, V.A. Danam, N.K. Katiyar, B.K. Das, C.S. Tiwary, and J. Bhattacharya, Enhancing Structural Resilience by Using 3D Printed Complex Polymer Reinforcement for High Damage Tolerant Structures, Constr. Build. Mater., 2024, 425, p 136085. https://doi.org/10.1016/J.CONBUILDMAT.2024.13608510.1016/J.CONBUILDMAT.2024.136085 ↗
3. Fibreglass: An In-Depth Examination of Its Environmental Impact. Accessed: Jan. 16, 2025. [Online]. Available: https://www.greenmatch.co.uk/blog/fibreglass-environmental-impact
4. S. Ding, B. Zou, P. Zhang, Q. Liu, Z. Feng, T. Quan, F. Wang, L. Li, and J. Liu, Layout Design and Mechanical Behavior of 3D Printed Intralayer Hybrid Continuous Carbon/Glass Fiber Composites, J. Manuf. Process., 2024, 115, p 126-136. https://doi.org/10.1016/J.JMAPRO.2024.02.02610.1016/J.JMAPRO.2024.02.026 ↗
5. K. Lian, L. Yang, D. Zhu, X. Gong, H. Zhang, K. Wang, J. Li, and W. Yu, Effect of Printing Parameters on 3D-Printed Carbon Fiber-Reinforced Polymer Composites Under Magnetic Field Control, J. Manuf. Process., 2023, 101, p 1443-1452. https://doi.org/10.1016/J.JMAPRO.2023.07.04010.1016/J.JMAPRO.2023.07.040 ↗
6. T.D. Moshood, G. Nawanir, F. Mahmud, F. Mohamad, M.H. Ahmad, and A. AbdulGhani, Sustainability of Biodegradable Plastics: New Problem or Solution to Solve the Global Plastic Pollution?, Curr. Res. Green Sustain. Chem., 2022, 5, p 100273. https://doi.org/10.1016/J.CRGSC.2022.10027310.1016/J.CRGSC.2022.100273 ↗
7. H.M. Khanlou, P. Woodfield, J. Summerscales, G. Francucci, B. King, S. Talebian, J. Foroughi, and W. Hall, Estimation of Mechanical Property Degradation of Poly (Lactic Acid) and Flax Fibre Reinforced Poly (lactic acid) Bio-Composites During Thermal Processing, Measurement, 2018, 116, p 367-372. https://doi.org/10.1016/J.MEASUREMENT.2017.11.03110.1016/J.MEASUREMENT.2017.11.031 ↗
8. S. Cao, X. Wang, and Z. Wu, Evaluation and Prediction of Temperature-Dependent Tensile Strength of Unidirectional Carbon Fiber-Reinforced Polymer Composites, J. Reinf. Plast. Compos.Reinf. Plast. Compos., 2011, 30(9), p 799-807. https://doi.org/10.1177/073168441141100210.1177/0731684411411002 ↗
9. I.R. Chowdhury, R. Pemberton, and J. Summerscales, Developments and Industrial Applications of Basalt Fibre Reinforced Composite Materials, J. Compos. Sci., 2022, 6(12), p 367. https://doi.org/10.3390/JCS612036710.3390/JCS6120367 ↗
10. G. Mittal, K.Y. Rhee, V. Mišković-Stanković, and D. Hui, Reinforcements in Multi-scale Polymer Composites: Processing, Properties, and Applications, Compos. B Eng., 2018, 138, p 122-139. https://doi.org/10.1016/J.COMPOSITESB.2017.11.02810.1016/J.COMPOSITESB.2017.11.028 ↗
11. “IOP Conference Series: Earth and Environmental Science”, https://doi.org/10.1088/1755-1315/186/2/012052.10.1088/1755-1315/186/2/012052 ↗
12. M. De Araújo, Natural and Man-made Fibres: Physical and Mechanical Properties, Fibrous and Composite Materials for Civil Engineering Applications, pp. 3-28, Jan. 2011, https://doi.org/10.1533/9780857095583.1.3.10.1533/9780857095583.1.3 ↗
13. I.S. Pascariu and S.M. Zaharia, Design, and Testing of an Unmanned Aerial Vehicle Manufactured by Fused Deposition Modeling, J. Aerosp. Eng.Aerosp. Eng., 2020, 33(4), p 06020002. https://doi.org/10.1061/(ASCE)AS.1943-5525.000115410.1061/(ASCE)AS.1943-5525.0001154 ↗
14. S. Ravindrababu, Y. Govdeli, Z.W. Wong, and E. Kayacan, Evaluation of the Influence of Build and Print Orientations of Unmanned Aerial Vehicle Parts Fabricated Using Fused Deposition Modeling Process, J. Manuf. Process., 2018, 34, p 659-666. https://doi.org/10.1016/J.JMAPRO.2018.07.00710.1016/J.JMAPRO.2018.07.007 ↗
15. Z. Yi, T. Shen, H. Xiong, X. Kang, L. Zhang, and K. Zhou, Strong and Densified 3D Metal-Ceramic Composite with Strengthened Layer Structure by Material Extrusion Additive Manufacturing, Addit. Manuf.. Manuf., 2024, 84, p 104136. https://doi.org/10.1016/J.ADDMA.2024.10413610.1016/J.ADDMA.2024.104136 ↗
16. N.K. Bankapalli, V. Gupta, P. Saxena, A. Bajpai, C. Lahoda, and J. Polte, Filament Fabrication and Subsequent Additive Manufacturing, Debinding, and Sintering for Extrusion-Based Metal Additive Manufacturing and their Applications: A Review, Compos. B Eng., 2023, 264, p 110915. https://doi.org/10.1016/J.COMPOSITESB.2023.11091510.1016/J.COMPOSITESB.2023.110915 ↗
17. K.B. Mustapha and K.M. Metwalli, A Review of Fused Deposition Modelling for 3D Printing of Smart Polymeric Materials and Composites, Eur. Polym. J.Polym. J., 2021, 156, p 110591. https://doi.org/10.1016/J.EURPOLYMJ.2021.11059110.1016/J.EURPOLYMJ.2021.110591 ↗
18. K. Rajan, M. Samykano, K. Kadirgama, W.S. Harun, and M.M. Rahman, Fused Deposition Modeling: Process, Materials, Parameters, Properties, and Applications, Int. J. Adv. Manuf. Technol., 2022, 120(3), p 1531-1570. https://doi.org/10.1007/S00170-022-08860-710.1007/S00170-022-08860-7 ↗
19. H. Singh, A.B. Santos, D. Das, R.S. Ambekar, P. Saxena, C.F. Woellner, N.K. Katiyar, and C.S. Tiwary, Stress Concentration Targeted Reinforcement Using Multi-Material Based 3D Printing, Appl. Mater. Today, 2024, 36, p 102010. https://doi.org/10.1016/J.APMT.2023.10201010.1016/J.APMT.2023.102010 ↗
20. B. Sun, S. Mubarak, G. Zhang, K. Peng, X. Hu, Q. Zhang, L. Wu, and J. Wang, Fused-Deposition Modeling 3D Printing of Short-Cut Carbon-Fiber-Reinforced PA6 Composites for Strengthening, Toughening, and Light Weighting, Polymers, 2023, 15(18), p 3722. https://doi.org/10.3390/POLYM15183722/S110.3390/POLYM15183722/S1 ↗
21. Z.I. Khan, Z. Mohamad, A.R. Rahmat, and U. Habib, Synthesis and Characterization of Composite Materials with Enhanced Thermo-Mechanical Properties for Unmanned Aerial Vehicles (Uavs) and Aerospace Technologies, Pertanika. J. Sci. Technol., 2021, 29(3), p 2003-2015. https://doi.org/10.47836/pjst.29.3.1510.47836/pjst.29.3.15 ↗
22. J. Wong, A. Altassan, and D.W. Rosen, Additive Manufacturing of Fiber-Reinforced Polymer Composites: A Technical Review and Status of Design Methodologies, Compos. B Eng., 2023, 255, p 110603. https://doi.org/10.1016/J.COMPOSITESB.2023.11060310.1016/J.COMPOSITESB.2023.110603 ↗
23. W. Ahmad, H.A. Khan, S. Salik, H.Q. Ali, S. Khushbash, and Z.A. Qureshi, Extrusion-Based Additive Manufacturing of CFRP/Steel/CFRP Multi-material Structure: Process Development and Influence of Heat Treatment on the Mechanical Performance, J. Manuf. Process., 2024, 124, p 891-908. https://doi.org/10.1016/J.JMAPRO.2024.06.01710.1016/J.JMAPRO.2024.06.017 ↗
24. C. Pandelidi, S. Bateman, S. Piegert, R. Hoehner, I. Kelbassa, and M. Brandt, The Technology of Continuous Fibre-Reinforced Polymers: A Review on Extrusion Additive Manufacturing Methods, Int. J. Adv. Manuf. Technol., 2021, 113, p 3057-3077. https://doi.org/10.1007/S00170-021-06837-610.1007/S00170-021-06837-6 ↗
25. G. Struzziero, M. Barbezat, and A.A. Skordos, Consolidation of Continuous Fibre Reinforced Composites in Additive Processes: A Review, Addit. Manuf.. Manuf., 2021, 48, p 102458. https://doi.org/10.1016/J.ADDMA.2021.10245810.1016/J.ADDMA.2021.102458 ↗
26. A. Uşun and R. Gümrük, The Mechanical Performance of the 3D Printed Composites Produced with Continuous Carbon Fiber Reinforced Filaments Obtained via Melt Impregnation, Addit. Manuf.. Manuf., 2021, 46, p 102112. https://doi.org/10.1016/J.ADDMA.2021.10211210.1016/J.ADDMA.2021.102112 ↗
27. Y. Ming, S. Zhang, W. Han, B. Wang, Y. Duan, and H. Xiao, Investigation on Process Parameters of 3D Printed Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composites, Addit. Manuf.. Manuf., 2020, 33, p 101184. https://doi.org/10.1016/J.ADDMA.2020.10118410.1016/J.ADDMA.2020.101184 ↗
28. A.N. Dickson, J.N. Barry, K.A. McDonnell, and D.P. Dowling, Fabrication of Continuous Carbon, Glass and Kevlar Fibre Reinforced Polymer Composites Using Additive Manufacturing, Addit. Manuf.. Manuf., 2017, 16, p 146-152. https://doi.org/10.1016/J.ADDMA.2017.06.00410.1016/J.ADDMA.2017.06.004 ↗
29. Z. Yang, Z. Yang, H. Chen, and W. Yan, 3D Printing of Short Fiber Reinforced Composites via Material Extrusion: Fiber Breakage, Addit. Manuf.. Manuf., 2022, 58, p 103067. https://doi.org/10.1016/J.ADDMA.2022.10306710.1016/J.ADDMA.2022.103067 ↗
30. H. Dou, Y. Cheng, W. Ye, D. Zhang, J. Li, Z. Miao, and S. Rudykh, Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites, Materials, 2020, 13(17), p 3850. https://doi.org/10.3390/MA1317385010.3390/MA13173850 ↗
31. X. Tian, T. Liu, C. Yang, Q. Wang, and D. Li, Interface and Performance of 3D Printed Continuous Carbon Fiber Reinforced PLA Composites, Compos. Part A Appl. Sci. Manuf., 2016, 88, p 198-205. https://doi.org/10.1016/J.COMPOSITESA.2016.05.03210.1016/J.COMPOSITESA.2016.05.032 ↗
32. J.M. Pappas, A.R. Thakur, M.C. Leu, and X. Dong, A Parametric Study and Characterization of Additively Manufactured Continuous Carbon Fiber Reinforced Composites for High-speed 3D Printing, Int. J. Adv. Manuf. Technol., 2021, 113(7-8), p 2137-2151. https://doi.org/10.1007/S00170-021-06723-1/FIGURES/1810.1007/S00170-021-06723-1/FIGURES/18 ↗
33. K. Chen, L. Yu, Y. Cui, M. Jia, and K. Pan, Optimization of Printing Parameters of 3D-Printed Continuous Glass Fiber Reinforced Polylactic acid Composites, Thin-Walled Struct., 2021, 164, p 107717. https://doi.org/10.1016/J.TWS.2021.10771710.1016/J.TWS.2021.107717 ↗
34. Y. Wang, D. Kong, Q. Zhang, W. Li, and J. Liu, Process Parameters and Mechanical Properties of Continuous Glass Fiber Reinforced Composites-Polylactic Acid by Fused Deposition Modeling, J. Reinf. Plast. Compos.Reinf. Plast. Compos., 2021, 40(17-18), p 686-698. https://doi.org/10.1177/073168442199801710.1177/0731684421998017 ↗
35. T. Cersoli, B. Yelamanchi, E. MacDonald, J.G. Carrillo, and P. Cortes, 3D Printing of a Continuous Fiber-Reinforced Composite Based on a Coaxial Kevlar/PLA Filament, Compos. Adv. Mater., 2021, 30, p 26349833211000056. https://doi.org/10.1177/2634983321100005810.1177/26349833211000058 ↗
36. K.K. Ojha, G. Gugliani, and V. Francis, Impact and Tensile Performance of Continuous 3D-Printed Kevlar Fiber-Reinforced Composites Manufactured by Fused Deposition Modelling, Prog. Addit. Manuf., 2023, 8(5), p 1043-1057. https://doi.org/10.1007/S40964-022-00374-8/METRICS10.1007/S40964-022-00374-8/METRICS ↗
37. J.M. Chacón, M.A. Caminero, P.J. Núñez, E. García-Plaza, I. García-Moreno, and J.M. Reverte, Additive Manufacturing of Continuous Fibre Reinforced Thermoplastic Composites Using Fused Deposition Modelling: Effect of Process Parameters on Mechanical Properties, Compos. Sci. Technol., 2019, 181, p 107688. https://doi.org/10.1016/J.COMPSCITECH.2019.10768810.1016/J.COMPSCITECH.2019.107688 ↗
38. K. Wang, G. Xie, J. Xiang, T. Li, Y. Peng, J. Wang, and H. Zhang, Materials Selection of 3D Printed Polyamide-Based Composites at Different Strain Rates: A Case Study of Automobile Front Bumpers, J. Manuf. Process., 2022, 84, p 1449-1462. https://doi.org/10.1016/J.JMAPRO.2022.11.02410.1016/J.JMAPRO.2022.11.024 ↗
39. S. Das, ORNL/TM-2000/283 the Cost of Automotive Polymer Composites: A Review and Assessment of Doe’s Lightweight Materials Composites Research, 2001.10.2172/777656 ↗
40. P. Larrinaga, C. Chastre, H.C. Biscaia, and J.T. San-José, Experimental and Numerical Modeling of Basalt Textile Reinforced Mortar Behavior Under Uniaxial Tensile Stress, Mater. Des., 2014, 55, p 66-74. https://doi.org/10.1016/J.MATDES.2013.09.05010.1016/J.MATDES.2013.09.050 ↗
41. T.M. Borhan, Properties of Glass Concrete Reinforced with Short Basalt Fibre, Mater. Des., 2012, 42, p 265-271. https://doi.org/10.1016/J.MATDES.2012.05.06210.1016/J.MATDES.2012.05.062 ↗
42. V. Fiore, G. Di Bella, and A. Valenza, Glass-Basalt/Epoxy Hybrid Composites for Marine Applications, Mater. Des., 2011, 32(4), p 2091-2099. https://doi.org/10.1016/J.MATDES.2010.11.04310.1016/J.MATDES.2010.11.043 ↗
43. X. Wang, Z. Wu, G. Wu, H. Zhu, and F. Zen, Enhancement of Basalt FRP by Hybridization for Long-span Cable-Stayed Bridge, Compos. B Eng., 2013, 44(1), p 184-192. https://doi.org/10.1016/J.COMPOSITESB.2012.06.00110.1016/J.COMPOSITESB.2012.06.001 ↗
44. B. Wei, H. Cao, and S. Song, Degradation of Basalt Fibre and Glass Fibre/Epoxy Resin Composites in Seawater, Corros. Sci.. Sci., 2011, 53(1), p 426-431. https://doi.org/10.1016/J.CORSCI.2010.09.05310.1016/J.CORSCI.2010.09.053 ↗
45. V. Lopresto, C. Leone, and I. De Iorio, Mechanical Characterisation of Basalt Fibre Reinforced Plastic, Compos. B Eng., 2011, 42(4), p 717-723. https://doi.org/10.1016/J.COMPOSITESB.2011.01.03010.1016/J.COMPOSITESB.2011.01.030 ↗
46. L. Sang, S. Han, Z. Li, X. Yang, and W. Hou, Development of Short Basalt Fiber Reinforced Polylactide Composites and their Feasible Evaluation for 3D Printing Applications, Compos. B Eng., 2019, 164, p 629-639. https://doi.org/10.1016/J.COMPOSITESB.2019.01.08510.1016/J.COMPOSITESB.2019.01.085 ↗
47. S. Yu, Y.H. Hwang, J.Y. Hwang, and S.H. Hong, Analytical Study on the 3D-Printed Structure and Mechanical Properties of Basalt Fiber-Reinforced PLA Composites Using x-ray Microscopy, Compos. Sci. Technol., 2019, 175, p 18-27. https://doi.org/10.1016/J.COMPSCITECH.2019.03.00510.1016/J.COMPSCITECH.2019.03.005 ↗
48. Y. Zhang, C. Yu, P.K. Chu, F. Lv, C. Zhang, J. Ji, R. Zhang, and H. Wang, Mechanical and Thermal Properties of Basalt Fiber Reinforced Poly (Butylene Succinate) Composites, Mater. Chem. Phys., 2012, 133(2-3), p 845-849. https://doi.org/10.1016/J.MATCHEMPHYS.2012.01.10510.1016/J.MATCHEMPHYS.2012.01.105 ↗
49. D.P. Dowling, H.M. Abourayana, T. Brantseva, A. Antonov, and P.J. Dobbyn, Enhancing the Mechanical Performance of 3D-Printed Basalt Fiber-Reinforced Composites Using In-Line Atmospheric Plasma Pretreatments, Plasma Process. Polym.Polym., 2020, 17(1), p 1900143. https://doi.org/10.1002/PPAP.20190014310.1002/PPAP.201900143 ↗
50. N. Coughlin, B. Drake, M. Fjerstad, E. Schuster, T. Waege, A. Weerakkody, and T. Letcher, Development and Mechanical Properties of Basalt Fiber-Reinforced Acrylonitrile Butadiene Styrene for In-Space Manufacturing Applications, J. Compos. Sci., 2019, 3(3), p 89. https://doi.org/10.3390/JCS303008910.3390/JCS3030089 ↗
51. H. Zhang and W.F. Sun, Mechanical Properties and Failure Behavior of 3D Printed Thermoplastic Composites Using Continuous Basalt Fiber Under High-Volume Fraction, Def. Technol., 2023, 27, p 237-250. https://doi.org/10.1016/J.DT.2022.07.01010.1016/J.DT.2022.07.010 ↗
52. J. Yan, E. Demirci, and A. Gleadall, Are Classical Fibre Composite Models Appropriate for Material Extrusion Additive Manufacturing? A Thorough Evaluation of Analytical Models, Addit. Manuf.. Manuf., 2023, 62, p 103371. https://doi.org/10.1016/J.ADDMA.2022.10337110.1016/J.ADDMA.2022.103371 ↗
53. J.A. Travieso-Rodriguez, R. Jerez-Mesa, J. Llumà, O. Traver-Ramos, G. Gomez-Gras, and J.J. Roa Rovira, Mechanical Properties of 3D-Printing Polylactic Acid Parts Subjected to Bending Stress and Fatigue Testing, Materials, 2019, 12(23), p 3859. https://doi.org/10.3390/MA1223385910.3390/MA12233859 ↗
54. “est PLA 3D Printer Filament eSUN PLA filament 1.75mm 1kg. Accessed: Apr. 10, 2024. [Online]. Available: https://www.esun3d.com/pla-product/
55. H. Zhang, Y. Yao, D. Zhu, B. Mobasher, and L. Huang, Tensile Mechanical Properties of Basalt Fiber Reinforced Polymer Composite Under Varying Strain Rates and Temperatures, Polym. Test.. Test., 2016, 51, p 29-39. https://doi.org/10.1016/J.POLYMERTESTING.2016.02.00610.1016/J.POLYMERTESTING.2016.02.006 ↗
56. T. Okabe, K. Ishii, M. Nishikawa, and N. Takeda, Prediction of Tensile Strength of Unidirectional CFRP Composites, Adv. Compos. Mater., 2010, 19(3), p 229-241. https://doi.org/10.1163/092430409X1260540669827310.1163/092430409X12605406698273 ↗
57. M.R. Wisnom, B. Khan, and S.R. Hallett, Size Effects in Unnotched Tensile Strength of Unidirectional and Quasi-Isotropic Carbon/Epoxy Composites, Compos. Struct.Struct., 2008, 84(1), p 21-28. https://doi.org/10.1016/J.COMPSTRUCT.2007.06.00210.1016/J.COMPSTRUCT.2007.06.002 ↗
58. H. Singh, L.V. Bastos, D. Das, R.S. Ambekar, C. Woellner, N.M. Pugno, and C.S. Tiwary, Composite Strengthening via Stress-Concentration Regions Softening: the Proof of Concept with Schwarzites and Schwarzynes Inspired Multi-material Additive Manufacturing, Addit. Manuf.. Manuf., 2024, 90, p 104336. https://doi.org/10.1016/J.ADDMA.2024.10433610.1016/J.ADDMA.2024.104336 ↗
59. D. K. Y. Tam, S. Ruan, P. Gao, and T. Yu, “High-performance Ballistic Protection using Polymer Nanocomposites,” Advances in Military Textiles and Personal Equipment, pp. 213-237, 2012, https://doi.org/10.1533/9780857095572.2.213.10.1533/9780857095572.2.213 ↗
60. G. Qi, B. Zhang, and Y. Yu, Research on Carbon Fiber/Epoxy Interfacial Bonding Characterization of Transverse Fiber Bundle Composites Fabricated by Different Preparation Processes: Effect of Fiber Volume Fraction, Polym. Test.. Test., 2016, 52, p 150-156. https://doi.org/10.1016/J.POLYMERTESTING.2016.03.02210.1016/J.POLYMERTESTING.2016.03.022 ↗
61. J. Li, Y. Durandet, X. Huang, G. Sun, and D. Ruan, Additively Manufactured Fiber-Reinforced Composites: a Review of Mechanical Behavior and Opportunities, J. Mater. Sci. Technol., 2022, 119, p 219-244. https://doi.org/10.1016/J.JMST.2021.11.06310.1016/J.JMST.2021.11.063 ↗
62. C. Oztan, R. Karkkainen, M. Fittipaldi, G. Nygren, L. Roberson, M. Lane, and E. Celik, Microstructure and Mechanical Properties of Three Dimensional-Printed Continuous Fiber Composites, J. Compos. Mater., 2019, 53(2), p 271-280. https://doi.org/10.1177/002199831878193810.1177/0021998318781938 ↗
63. H. Mei, Z. Ali, Y. Yan, I. Ali, and L. Cheng, Influence of Mixed Isotropic Fiber Angles and Hot Press on the Mechanical Properties of 3D Printed Composites, Addit. Manuf.. Manuf., 2019, 27, p 150-158. https://doi.org/10.1016/J.ADDMA.2019.03.00810.1016/J.ADDMA.2019.03.008 ↗
64. H. Mei, Z. Ali, I. Ali, and L. Cheng, Tailoring Strength and Modulus by 3D Printing Different Continuous Fibers and Filled Structures Into Composites, Adv. Compos. Hybrid Mater., 2019, 2(2), p 312-319. https://doi.org/10.1007/S42114-019-00087-7/FIGURES/710.1007/S42114-019-00087-7/FIGURES/7 ↗
65. R. Matsuzaki, M. Ueda, M. Namiki, T.K. Jeong, H. Asahara, K. Horiguchi, T. Nakamura, A. Todoroki, and Y. Hirano, Three-dimensional Printing of Continuous-Fiber Composites by In-Nozzle Impregnation, Sci. Rep., 2016, 6(1), p 23058. https://doi.org/10.1038/srep2305810.1038/srep23058 ↗
66. Y. Peng, Y. Wu, K. Wang, G. Gao, and S. Ahzi, Synergistic Reinforcement of Polyamide-Based Composites by Combination of Short and Continuous Carbon Fibers via Fused Filament Fabrication, Compos. Struct.Struct., 2019, 207, p 232-239. https://doi.org/10.1016/J.COMPSTRUCT.2018.09.01410.1016/J.COMPSTRUCT.2018.09.014 ↗
67. G.W. Melenka, B.K.O. Cheung, J.S. Schofield, M.R. Dawson, and J.P. Carey, Evaluation and Prediction of the Tensile Properties of Continuous Fiber-Reinforced 3D Printed Structures, Compos. Struct.Struct., 2016, 153, p 866-875. https://doi.org/10.1016/J.COMPSTRUCT.2016.07.01810.1016/J.COMPSTRUCT.2016.07.018 ↗
68. M. Araya-Calvo, I. López-Gómez, N. Chamberlain-Simon, J.L. León-Salazar, T. Guillén-Girón, J.S. Corrales-Cordero, and O. Sánchez-Brenes, Evaluation of Compressive and Flexural Properties of Continuous Fiber Fabrication Additive Manufacturing Technology, Addit. Manuf.. Manuf., 2018, 22, p 157-164. https://doi.org/10.1016/J.ADDMA.2018.05.00710.1016/J.ADDMA.2018.05.007 ↗
69. G.D. Goh, V. Dikshit, A.P. Nagalingam, G.L. Goh, S. Agarwala, S.L. Sing, J. Wei, and W.Y. Yeong, Characterization of Mechanical Properties and Fracture Mode of Additively Manufactured Carbon Fiber and Glass Fiber Reinforced Thermoplastics, Mater. Des., 2018, 137, p 79-89. https://doi.org/10.1016/J.MATDES.2017.10.02110.1016/J.MATDES.2017.10.021 ↗
70. C. Yang, X. Tian, T. Liu, Y. Cao, and D. Li, 3D Printing for Continuous Fiber Reinforced Thermoplastic Composites: Mechanism and Performance, Rapid Prototyp. J., 2017, 23(1), p 209-215. https://doi.org/10.1108/RPJ-08-2015-0098/FULL/XML10.1108/RPJ-08-2015-0098/FULL/XML ↗