Stress Corrosion Cracking of AA7075 Aluminum Alloy Processed via Additive Friction Stir Deposition
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. I. Gibson, D.W. Rosen, B. Stucker, M. Khorasani, D. Rosen, B. Stucker, and M. Khorasani, Additive Manufacturing Technologies, Springer, 2021.10.1007/978-3-030-56127-7 ↗
2. P. Agrawal, R.S. Haridas, S. Yadav, S. Thapliyal, S. Gaddam, R. Verma, and R.S. Mishra, Processing-Structure-Property Correlation in Additive Friction Stir Deposited Ti-6Al-4V Alloy from Recycled Metal Chips, Addit. Manuf., 2021, 47, p 102259.
3. ASTM Standard, Terminology Standard Terminology for Additive Manufacturing Technologies, Astm International, 2012.
4. Z.Y. Hang, Additive Friction Stir Deposition, Elsevier, 2022.
5. N. Tuncer and A. Bose, Solid-State Metal Additive Manufacturing: A Review, Jom, 2020, 72(9), p 3090–3111.10.1007/s11837-020-04260-y ↗
6. H.Z. Yu, M.E. Jones, G.W. Brady, R.J. Griffiths, D. Garcia, H.A. Rauch, C.D. Cox, and N. Hardwick, Non-beam-Based Metal Additive Manufacturing Enabled by Additive Friction Stir Deposition, Scr. Mater., 2018, 153, p 122–130.10.1016/j.scriptamat.2018.03.025 ↗
7. R.J. Griffiths, D. Garcia, J. Song, V.K. Vasudevan, M.A. Steiner, W. Cai, and Z.Y. Hang, Solid-State Additive Manufacturing of Aluminum and Copper using Additive Friction Stir Deposition: Process-Microstructure Linkages, Materialia, 2021, 15, p 100967.10.1016/j.mtla.2020.100967 ↗
8. M. Li, W. Du, A. Elwany, Z. Pei, and C. Ma, Metal Binder Jetting Additive Manufacturing: A Literature Review, J. Manuf. Sci. Eng., 2020, 142(9), p 090801.10.1115/1.4047430 ↗
9. M. Jurisch, T. Studnitzky, O. Andersen, and B. Kieback, 3D Screen Printing for the Fabrication of Small Intricate Ti-6Al-4V Parts, Powder Metall., 2015, 58(5), p 339–343. (in English)10.1179/0032589915Z.000000000255 ↗
10. A.I. Nurhudan, S. Supriadi, Y. Whulanza, and A.S. Saragih, Additive Manufacturing of Metallic Based on Extrusion Process: A Review, J. Manuf. Process., 2021, 66, p 228–237.10.1016/j.jmapro.2021.04.018 ↗
11. A. Hehr and M. Norfolk, A Comprehensive Review of Ultrasonic Additive Manufacturing, Rapid Prototyp. J., 2019, 26(3), p 445–458.10.1108/RPJ-03-2019-0056 ↗
12. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li, and R. Lupoi, Cold Spray Additive Manufacturing and Repair: Fundamentals and Applications, Addit. Manuf., 2018, 21, p 628–650.
13. M. Korgancı and Y. Bozkurt, Recent Developments in Additive Friction Stir Deposition (AFSD), J. Market. Res., 2024, 30, p 4572–4583.
14. C. Gang, W. Kai, S. Yu, J. Hepeng, Z. Zhixiong, and H. Fengfeng, 搅拌摩擦沉积增材技术研究进展 (Research progress in additive friction stir deposition), J. Mater. Eng. /Cailiao Gongcheng, 2023, 51(1), p 52–63. (in Chinese)
15. K. Anderson-Wedge, D.Z. Avery, S.R. Daniewicz, J.W. Sowards, P.G. Allison, J.B. Jordon, and R.L. Amaro, Characterization of the Fatigue Behavior of Additive Friction Stir-Deposition AA2219, Int. J. Fatigue, 2021, 142, p 105951.10.1016/j.ijfatigue.2020.105951 ↗
16. B.A. Rutherford, D.Z. Avery, B.J. Phillips, H.M. Rao, K.J. Doherty, P.G. Allison, L.N. Brewer, and J.B. Jordon, Effect of Thermomechanical Processing on Fatigue Behavior in Solid-State Additive Manufacturing of Al-Mg-Si Alloy, Metals, 2020, 10(7), p 947.10.3390/met10070947 ↗
17. D.Z. Avery, B.J. Phillips, C.J.T. Mason, M. Palermo, M.B. Williams, C. Cleek, O.L. Rodriguez, P.G. Allison, and J.B. Jordon, Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy, Metall. Mater. Trans. A, 2020, 51(6), p 2778–2795.10.1007/s11661-020-05746-9 ↗
18. J.B. Jordon, P.G. Allison, B.J. Phillips, D.Z. Avery, R.P. Kinser, L.N. Brewer, C. Cox, and K. Doherty, Direct Recycling of Machine Chips Through a Novel Solid-State Additive Manufacturing Process, Mater. Des., 2020, 193, p 108850.10.1016/j.matdes.2020.108850 ↗
19. S.C. Beck, C.J. Williamson, R.P. Kinser, B.A. Rutherford, M.B. Williams, B.J. Phillips, K.J. Doherty, P.G. Allison, and J.B. Jordon, Examination of Microstructure and Mechanical Properties of Direct Additive Recycling for Al-Mg-Mn Alloy Machine Chip Waste, Mater. Des., 2023, 228, p 111733.10.1016/j.matdes.2023.111733 ↗
20. Y. Li, B. Yang, M. Zhang, H. Wang, W. Gong, R. Lai, Y. Li, and J. Teng, The Corrosion Behavior and Mechanical Properties of 5083 Al-Mg Alloy Manufactured by Additive Friction Stir Deposition, Corros. Sci., 2023, 213, p 110972.10.1016/j.corsci.2023.110972 ↗
21. O.G. Rivera, P.G. Allison, L.N. Brewer, O.L. Rodriguez, J.B. Jordon, T. Liu, W.R. Whittington, R.L. Martens, Z. McClelland, C.J.T. Mason, L. Garcia, J.Q. Su, and N. Hardwick, Influence of Texture and Grain Refinement on the Mechanical Behavior of AA2219 Fabricated by High Shear Solid State Material Deposition, Mater. Sci. Eng. A, 2018, 724, p 547–558.10.1016/j.msea.2018.03.088 ↗
22. J.K. Yoder, G.D. Hahn, N. Zhao, R.E. Brennan, K. Cho, and H.Z. Yu, Additive Friction Stir Deposition-Enabled Upcycling of Automotive Cast Aluminum Chips, Addit. Manuf. Lett., 2023, 4, p 100108.10.1016/j.addlet.2022.100108 ↗
23. Y. Li, M. Zhang, H. Wang, R. Lai, B. Yang, and Y. Li, Microstructure and Mechanical Properties of Al–Li Alloy Manufactured by Additive Friction Stir Deposition, Mater. Sci. Eng. A, 2023, 887, p 145753.10.1016/j.msea.2023.145753 ↗
24. G. Chen, K. Wu, Y. Wang, Y. Sun, X. Wang, Z. Zhu, and F. Hu, Quantitative Study on the Correlation Between Microstructure and Mechanical Properties of Additive Friction Stir Deposited 6061–T6 Al-Mg-Si Alloy, J. Market. Res., 2023, 25, p 6725–6736.
25. B.J. Phillips, C.J.T. Mason, S.C. Beck, D.Z. Avery, K.J. Doherty, P.G. Allison, and J.B. Jordon, Effect of Parallel Deposition Path and Interface Material Flow on Resulting Microstructure and Tensile Behavior of Al-Mg-Si Alloy Fabricated by Additive Friction Stir Deposition, J. Mater. Process. Technol., 2021, 295, p 117169.10.1016/j.jmatprotec.2021.117169 ↗
26. S.C. Beck, B.A. Rutherford, D.Z. Avery, B.J. Phillips, H. Rao, M.Y. Rekha, L.N. Brewer, P.G. Allison, and J.B. Jordon, The Effect of Solutionizing and Artificial Aging on the Microstructure and Mechanical Properties in Solid-State Additive Manufacturing of Precipitation Hardened Al-Mg-Si Alloy, Mater. Sci. Eng. A, 2021, 819, p 141351.10.1016/j.msea.2021.141351 ↗
27. H. Ghadimi, M. Talachian, H. Ding, S. Emanet, and S. Guo, The Effects of Layer Thickness on the Mechanical Properties of Additive Friction Stir Deposition-Fabricated Aluminum Alloy 6061 Parts, Metals, 2024, 14(1), p 101.10.3390/met14010101 ↗
28. G. Chen, K. Wu, Y. Wang, Z. Zhu, P. Nie, and F. Hu, Effect of Rotational Speed and Feed Rate on Microstructure and Mechanical Properties of 6061 Aluminum Alloy Manufactured by Additive Friction Stir Deposition, Int. J. Adv. Manuf. Technol., 2023, 127(3), p 1165–1176.10.1007/s00170-023-11527-6 ↗
29. S. Babaniaris, L. Jiang, R.K. Varma, E. Farabi, T. Dorin, M. Barnett, and D. Fabijanic, Precipitation in AA6063 Produced from Swarf using Additive Friction Stir Deposition, Addit. Manuf. Lett., 2022, 3, p 100096.10.1016/j.addlet.2022.100096 ↗
30. H. Livatyali and J.R. Caudill, Solid-State versus Fusion-Based Metal Additive Manufacturing Technologies, Neu Press, 2023.
31. A.M. Jokisaari, Y. Chen, T. Copeland-Johnson, T. Hartmann, V. Joshi, I. van Rooyen, R. Song, and J. Wierschke, Corrosion Testing Needs and Considerations for Additively Manufactured Materials in Nuclear Reactors, Prog. Nucl. Energy, 2024, 174, p 105296.10.1016/j.pnucene.2024.105296 ↗
32. E. Soares, N. Bouchonneau, E. Alves, K. Alves, O. Araújo Filho, D. Mesguich, G. Chevallier, C. Laurent, and C. Estournès, Microstructure and Mechanical Properties of AA7075 Aluminum Alloy Fabricated by Spark Plasma Sintering (SPS), Materials, 2021, 14(2), p 430.10.3390/ma14020430 ↗
33. Y. Su, R. Savinov, Y. Wang, D. Lin, and J. Shi, Microstructure and Property Enhancement of 7075 Aluminium Alloy via Laser Metal Deposition Augmented by In-Situ Ultrasonic Vibration, Virt. Phys. Prototyp., 2024, 19(1), p e2301482.10.1080/17452759.2023.2301482 ↗
34. J.K. Yoder, R.J. Griffiths, and Z.Y. Hang, Deformation-Based Additive Manufacturing of 7075 Aluminum with Wrought-Like Mechanical Properties, Mater. Des., 2021, 198, p 109288.10.1016/j.matdes.2020.109288 ↗
35. Advances in EDM for Aerospace, https://www.radical-departures.net/articles/advances-in-edm-for-aerospace/. Accessed 11 Oct 2024
36. R. Parkins, 2.35 Environmentally Assisted Cracking Test Methods
37. J. Shao, A. Samaei, T. Xue, X. Xie, S. Guo, J. Cao, E. MacDonald, and Z. Gan, Additive Friction Stir Deposition of Metallic Materials: Process, Structure and Properties, Mater. Des., 2023, 234, p 112356.10.1016/j.matdes.2023.112356 ↗
38. P. Varshney and N. Kumar, Investigating the Susceptibility of Fe39Mn20Co20Cr15Si5Al1 High Entropy Alloy to Stress Corrosion Cracking in a 3.5 wt% NaCl Environment, Corros. Sci., 2023, 222, p 111422.10.1016/j.corsci.2023.111422 ↗
39. Y. Mei, Z. Hang, Z. Kuo, L. Jianhua, and L. Songmei, Effects of Dry/Wet Ratio and Pre-immersion on Stress Corrosion Cracking of 7050–T7451 Aluminum Alloy under Wet-Dry Cyclic Conditions, Chin. J. Aeronaut., 2018, 31(11), p 2176–2184.10.1016/j.cja.2018.01.008 ↗
40. M. Ahmed, S. Ataya, M.E.-S. Seleman, H. Ammar, and E. Ahmed, Friction Stir Welding of Similar and Dissimilar AA7075 and AA5083, J. Mater. Process. Technol., 2017, 242, p 77–91.10.1016/j.jmatprotec.2016.11.024 ↗
41. K.K. Jha, R. Kesharwani, and M. Imam, Investigation on Microstructural Evolution and Local Mechanical Performance of Friction Stir Lap Welded AA6061-T6/AA7075-T6 Joints, Eng. Fail. Anal., 2024, 160, p 108258.10.1016/j.engfailanal.2024.108258 ↗
42. H. Venkit and S.K. Selvaraj, Novel Approach in Manufacturing Aluminum-Based Alternate Layered Composite Material via Friction Stir Additive Manufacturing Route, Mater. Today Commun., 2024, 38, p 107839.10.1016/j.mtcomm.2023.107839 ↗
43. M. Rokni, A. Zarei-Hanzaki, and H. Abedi, Microstructure Evolution and Mechanical Properties of Back Extruded 7075 Aluminum Alloy at Elevated Temperatures, Mater. Sci. Eng. A, 2012, 532, p 593–600.10.1016/j.msea.2011.11.020 ↗
44. J. Humphreys, G.S. Rohrer, and A. Rollett, Recrystallization Textures, Recrystallization and Related Annealing Phenomena. Elsevier, 2017, p 431–46810.1016/B978-0-08-098235-9.00012-4 ↗
45. R. Fonda and K. Knipling, Texture Development in Friction Stir Welds, Sci. Technol. Weld. Joining, 2011, 16(4), p 288–294.10.1179/1362171811Y.0000000010 ↗
46. W. Cai, J. Mabon, and P. Bellon, Crystallographic Textures and Texture Transitions Induced by Sliding Wear in Bronze and Nickel, Wear, 2009, 267(1–4), p 485–494.10.1016/j.wear.2008.11.016 ↗
47. F. Montheillet, P. Gilormini, and J. Jonas, Relation between Axial Stresses and Texture Development during Torsion Testing: A Simplified Theory, Acta Metall., 1985, 33(4), p 705–717.10.1016/0001-6160(85)90035-5 ↗
48. M. Williams, T. Robinson, C. Williamson, R. Kinser, N. Ashmore, P. Allison, and J. Jordon, Elucidating the Effect of Additive Friction Stir Deposition on the Resulting Microstructure and Mechanical Properties of Magnesium Alloy we43, Metals, 2021, 11(11), p 1739.10.3390/met11111739 ↗
49. B. Wang, B.-B. Lei, J.-X. Zhu, Q. Feng, L. Wang, and D. Wu, EBSD Study on Microstructure and Texture of Friction Stir Welded AA5052-O and AA6061-T6 Dissimilar Joint, Mater. Des., 2015, 87, p 593–599.10.1016/j.matdes.2015.08.060 ↗
50. C. Zhang, G. Huang, Y. Cao, Y. Zhu, and Q. Liu, On the Microstructure and Mechanical Properties of Similar and Dissimilar AA7075 and AA2024 Friction Stir Welding Joints: Effect of Rotational Speed, J. Manuf. Process., 2019, 37, p 470–487.10.1016/j.jmapro.2018.12.014 ↗
51. D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata, Heterogeneity of Crystallographic Texture in Friction Stir Welds of Aluminum, Metall. Mater. Trans. A, 2001, 32, p 2869–2877.10.1007/s11661-001-1037-2 ↗
52. S. Chen and X. Jiang, Texture Evolution and Deformation Mechanism in Friction Stir Welding of 2219Al, Mater. Sci. Eng. A, 2014, 612, p 267–277.10.1016/j.msea.2014.06.014 ↗
53. Y.S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, T. Hashimoto, and S. Jogan, Microtexture in the Friction-Stir Weld of an Aluminum Alloy, Metall. Mater. Trans. A, 2001, 32, p 941–948.10.1007/s11661-001-0351-z ↗
54. C. Mason, R.I. Rodriguez, D.Z. Avery, B.J. Phillips, B.P. Bernarding, M. Williams, S.D. Cobbs, J.B. Jordon, and P. Allison, Process-Structure-Property Relations for As-deposited Solid-State Additively Manufactured High-Strength Aluminum Alloy, Addit. Manuf., 2021, 40, p 101879.
55. Z. Li, D. Yi, C. Tan, and B. Wang, Investigation of the Stress Corrosion Cracking Behavior in Annealed 5083 Aluminum Alloy Sheets with Different Texture Types, J. Alloys Compd., 2020, 817, p 152690.10.1016/j.jallcom.2019.152690 ↗
56. M. Orłowska, E. Ura-Bińczyk, L. Śnieżek, P. Skudniewski, M. Kulczyk, B. Adamczyk-Cieślak, and K. Majchrowicz, The Influence of Heat Treatment on the Mechanical Properties and Corrosion Resistance of the Ultrafine-Grained AA7075 Obtained by Hydrostatic Extrusion, Materials, 2022, 15(12), p 4343.10.3390/ma15124343 ↗
57. C.B. Fuller, M.W. Mahoney, M. Calabrese, and L. Micona, Evolution of Microstructure and Mechanical Properties in Naturally Aged 7050 and 7075 Al Friction Stir Welds, Mater. Sci. Eng. A, 2010, 527(9), p 2233–2240.10.1016/j.msea.2009.11.057 ↗
58. Y. Xiong, J.D. Robson, Z. Cao, Y. Deng, Y. Yao, X. Zhong, A. Bendo, L. Jinlong, F. Guarracino, and J. Donoghue, Mitigation Effects of Over-Aging (T73) Induced Intergranular Corrosion on Stress Corrosion Cracking of AA7075 Aluminum Alloy and Behaviors of η Phase Grain Boundary Precipitates during the Intergranular Corrosion Formation, Corros. Sci., 2023, 225, p 111570.10.1016/j.corsci.2023.111570 ↗
59. J.K. Park, and A. Ardell, Effect of Retrogression and Reaging Treatments on the Microstructure of Ai-7075-T651, Metall. Mater. Trans. A, 1984, 15, p 1531–1543.10.1007/BF02657792 ↗
60. S.P. Knight, Stress Corrosion Cracking of Al-Zn-Mg-Cu Alloys: Effects of Heat-Treatment, Environment, and Alloy Composition, Monash University, 2008.
61. W. Tang, X. Yang, C. Tian, and Y. Xu, Microstructural Heterogeneity and Bonding Strength of Planar Interface Formed in Additive Manufacturing of Al-Mg-Si Alloy Based on Friction and Extrusion, Int. J. Miner. Metall. Mater., 2022, 29(9), p 1755–1769.10.1007/s12613-022-2506-4 ↗
62. R. Parkins, Stress Corrosion Cracking-the Slow strain rate Technique, ASTM STP 665 (1979)
63. G. Ugiansky and J. Payer, Stress Corrosion Cracking: The Slow Strain-Rate Technique, ASTM International, 1979.10.1520/STP665-EB ↗
64. R.D. Kane, Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications, ASTM International, 1993.
65. R.E. Ricker, E. Lee, R. Taylor, C. Lei, B. Pregger, and E. Lipnickas, Chloride Ion Activity and Susceptibility of Al Alloys 7075–T6 and 5083–H131 to Stress Corrosion Cracking, Metall. Mater. Trans. A, 2013, 44, p 1353–1364.10.1007/s11661-012-1500-2 ↗
66. J.A. Lichtenfeld, C.J. Van Tyne, and M.C. Mataya, Effect of Strain Rate on Stress-Strain Behavior of Alloy 309 and 304L Austenitic Stainless Steel, Metall. Mater. Trans. A, 2006, 37, p 147–161.10.1007/s11661-006-0160-5 ↗
67. F. Ford, The crack-tip system and its relevance to the prediction of cracking in aqueous environments. First International Conference on Environment induced Cracking of Metals, NACE-10. NACE, Houston, TX, 1990, pp 139-166
68. J. Scully, The Interaction of Strain-Rate and Repassivation Rate in Stress Corrosion Crack Propagation, Corros. Sci., 1980, 20(8–9), p 997–1016.10.1016/0010-938X(80)90080-3 ↗
69. R. Carranza and J. Galvele, Repassivation Kinetics in Stress Corrosion Cracking—I. Type AISI 304 Stainless Steel in Chloride Solutions, Corros. Sci., 1988, 28(3), p 233–249.10.1016/0010-938X(88)90107-2 ↗
70. S. Ramamurthy and A. Atrens, Stress Corrosion Cracking of High-Strength Steels, Corros. Rev., 2013, 31(1), p 1–31.10.1515/corrrev-2012-0018 ↗
71. J. Scully, Kinetic Features of Stress-Corrosion Cracking, Corros. Sci., 1967, 7(4), p 197–207.10.1016/S0010-938X(67)80082-9 ↗
72. G. Frankel, J. Scully, and C. Jahnes, Repassivation of Pits in Aluminum Thin Films, J. Electrochem. Soc., 1996, 143(6), p 1834.10.1149/1.1836912 ↗
73. J. Rajaguru and N. Arunachalam, Effect of Machined Surface Integrity on the Stress Corrosion Cracking Behaviour of Super Duplex Stainless Steel, Eng. Fail. Anal., 2021, 125, p 105411.10.1016/j.engfailanal.2021.105411 ↗
74. J. Zhang, B. Wang, and L. Feng, Comprehensive Improvement of Stress Corrosion Cracking Resistance and Strength by Retrogression and Re-Aging in Al-8.9 Zn-2.6 Mg-1.7 Cu Alloy, J. Alloys Compd., 2022, 893, p 162310.10.1016/j.jallcom.2021.162310 ↗
75. X. Li, X. Li, S. Hu, Y. Liu, and D. Ma, Additive Friction Stir Deposition: A Review on Processes, Parameters, Characteristics, and Applications, Int. J. Adv. Manuf. Technol., 2024 https://doi.org/10.1007/s00170-024-13890-410.1007/s00170-024-13890-4 ↗
76. Z. Chen, J. Ren, Z. Yuan, and S.P. Ringer, Enhanced Strength-Plasticity Combination in an Al-Cu-Mg Alloy——Atomic Scale Microstructure Regulation And Strengthening Mechanisms, Mater. Sci. Eng. A, 2020, 787, p 139447.10.1016/j.msea.2020.139447 ↗
77. L. Hou, H. Yu, Y. Wang, L. You, Z. He, C. Wu, D.G. Eskin, L. Katgerman, L. Zhuang, and J. Zhang, Tailoring Precipitation/Properties and Related Mechanisms for a High-Strength Aluminum Alloy Plate via Low-Temperature Retrogression and Re-Aging Processes, J. Mater. Sci. Technol., 2022, 120, p 15–35.10.1016/j.jmst.2021.10.057 ↗
78. L. Zhou, K. Chen, S. Chen, Y. Ding, and S. Fan, Correlation between Stress Corrosion Cracking Resistance and Grain-Boundary Precipitates of a New Generation High Zn-Containing 7056 Aluminum Alloy by Non-Isothermal Aging and Re-Aging Heat Treatment, J. Alloys Compd., 2021, 850, 156717.10.1016/j.jallcom.2020.156717 ↗
79. D. Yuan, L. Tan, K. Chen, S. Chen, P. Xie, and H. Jiao, Comparison of Strength, Stress Corrosion Cracking and Microstructure of New Generation 7000 Series Aluminium Alloys, Mater. Sci. Technol., 2021, 37(6), p 616–623.10.1080/02670836.2021.1938838 ↗
80. B. Sarkar, M. Marek, and E. Starke, The Effect of Copper Content and Heat Treatment on the Stress Corrosion Characteristics of Ai-6Zn-2Mg-X Cu Alloys, Metall. Trans. A, 1981, 12, p 1939–1943.10.1007/BF02643806 ↗
81. J.K. Park, Influence of Retrogression and Reaging Treatments on the Strength and Stress Corrosion Resistance of Aluminium Alloy 7075–T6, Mater. Sci. Eng. A, 1988, 103(2), p 223–231.10.1016/0025-5416(88)90512-5 ↗