An Experimental Study on the Influence of Printing Parameters on Inter-raster Bonding in a Single-Layer Polylactic Acid Fabricated via Fused Filament Fabrication
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A. Safi Jahanshahi, Experimental Investigation of the Compressive Strength of Polylactic Acid/Continuous Glass Fiber Composite Material Produced with an Extrusion-Based 3D Printer Using the Simultaneous Impregnation System of Fibers and Polymer, Iran. J. Manuf. Eng., 2024 https://doi.org/10.22034/ijme.2024.442326.192910.22034/ijme.2024.442326.1929 ↗
2. J. Kechagias and S. Zaoutsos, Effects of 3D-Printing Processing Parameters on FFF Parts’ Porosity: Outlook and Trends, Mater. Manuf. Process., 2024 https://doi.org/10.1080/10426914.2024.230484310.1080/10426914.2024.2304843 ↗
3. B. Akhoundi, E. Khosravian, and V. Modanloo, Deposition of Continuous Glass Fibers on a Curved Surface by 3D Printer Based on Fused Filament Fabrication Technology, Iran. J. Manuf. Eng., 2024, 10(11), p 16–23. https://doi.org/10.22034/ijme.2024.429126.188510.22034/ijme.2024.429126.1885 ↗
4. X. Wei and R. Bähr, A Comparative Study of 3D Printing with Virgin and Recycled Polylactic Acid Filaments, CIRP J. Manuf. Sci. Technol., 2024, 54, p 75–84. https://doi.org/10.1016/j.cirpj.2024.08.00710.1016/j.cirpj.2024.08.007 ↗
5. N. Ranjan, R. Singh, I.P.S. Ahuja, R. Kumar, D. Singh, S. Ramniwas et al., 3D Printed Scaffolds for Tissue Engineering Applications: Mechanical, Morphological, Thermal, In-Vitro and In-Vivo Investigations, CIRP J. Manuf. Sci. Technol., 2021, 32, p 205–216. https://doi.org/10.1016/j.cirpj.2021.01.00210.1016/j.cirpj.2021.01.002 ↗
6. N. Ranjan, R. Singh, I.P.S. Ahuja, and J. Singh, Fabrication of PLA-HAp-CS Based Biocompatible and Biodegradable Feedstock Filament Using Twin Screw Extrusion, Additive Manufacturing of Emerging Materials. B. AlMangour Ed., Springer, Cham, 2019, p 325–34510.1007/978-3-319-91713-9_11 ↗
7. B. Akhoundi, Y. Taghipour Lahijani, and V. Modanloo, Optimizing Compressive Mechanical Properties and Water Absorption of Polycaprolactone/Nano-Hydroxyapatite Composite Scaffolds by 3D Printing Based on Fused Deposition Modeling, Proc. Inst. Mech. Eng. Part N J. Nanomater. Nanoeng. Nanosyst., 2023 https://doi.org/10.1177/2397791423120563910.1177/23977914231205639 ↗
8. Y. Xu, F. Zhang, W. Zhai, S. Cheng, J. Li, and Y. Wang, Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds, Polymers, 2022 https://doi.org/10.3390/polym1403056610.3390/polym14030566 ↗
9. F. Li, J. Gan, L. Zhang, H. Tan, E. Li, and B. Li, Enhancing impact resistance of hybrid structures designed with triply periodic minimal surfaces, Compos. Sci. Technol., 2024, 245, 110365. https://doi.org/10.1016/j.compscitech.2023.11036510.1016/j.compscitech.2023.110365 ↗
10. N. Ranjan, M. Singh, D. Singh, and R. Kumar, Chapter 5. Hydrogels for Additive Manufacturing in Scaffolding Applications: A Review, Innovative Processes and Materials in Additive Manufacturing. S. Singh, C. Prakash, S. Ramakrishna Ed., Woodhead Publishing, Sawston, 2023, p 103–12910.1016/B978-0-323-86011-6.00009-X ↗
11. N. Ranjan, R. Singh, and I.P.S. Ahuja, Investigations on Joining of Orthopaedic Scaffold with Rapid Tooling, Proc. Inst. Mech. Eng., 2019, 233(7), p 754–760. https://doi.org/10.1177/095441191985281110.1177/0954411919852811 ↗
12. N. Ranjan, R. Singh, I.P.S. Ahuja, R. Kumar, J. Singh, A.K. Verma et al., On 3D Printed Scaffolds for Orthopedic Tissue Engineering Applications, SN Appl. Sci., 2020, 2(2), p 192. https://doi.org/10.1007/s42452-020-1936-810.1007/s42452-020-1936-8 ↗
13. R. Dhanapal, V. Alagumalai, and V. Shanmugam, Exploring the Dynamic Mechanical Properties of Fused Filament Fabrication Printed Polyetheretherketone with Various Infill Patterns. Prog. Addit. Manuf., 2024 https://doi.org/10.1007/s40964-024-00792-w10.1007/s40964-024-00792-w ↗
14. L. He, B. Chen, Q. Liu, H. Chen, H. Li, W.T. Chow et al., A Quasi-exponential Distribution of Interfacial Voids and Its Effect on the Interlayer Strength of 3D Printed Concrete, Addit. Manuf., 2024, 89, 104296. https://doi.org/10.1016/j.addma.2024.10429610.1016/j.addma.2024.104296 ↗
15. J.D. Kechagias, S.P. Zaoutsos, N.A. Fountas, and N.M. Vaxevanidis, Experimental Investigation and Neural Network Development for Modeling Tensile Properties of Polymethyl Methacrylate (PMMA) Filament Material. Int. J. Adv. Manuf. Technol., 2024, 134, p 4387–4398. https://doi.org/10.1007/s00170-024-14402-010.1007/s00170-024-14402-0 ↗
16. S. Chen, S.B. Khan, N. Li, and C. Xiao, In-Depth Analysis of Sintering, Exposure Time, and Layer Height (um) in LRS 3D Printed Devices with DLP, J. Manuf. Process., 2025, 133, p 576–591. https://doi.org/10.1016/j.jmapro.2024.11.06010.1016/j.jmapro.2024.11.060 ↗
17. L. He, J. Pan, Y.S. Hee, H. Chen, L.G. Li, B. Panda et al., Development of Novel Concave and Convex Trowels for Higher Interlayer Strength of 3D Printed Cement Paste, Case Stud. Constr. Mater., 2024, 21, e03745. https://doi.org/10.1016/j.cscm.2024.e0374510.1016/j.cscm.2024.e03745 ↗
18. Y. Wu and G. Chiu, Modeling height profile for drop-on-demand print of uv curable ink. In Dynamic Systems and Control Conference 2019 Oct 8 (Vol. 59155, p. V002T13A006). American Society of Mechanical Engineers. https://doi.org/10.1115/DSCC2019-924210.1115/DSCC2019-9242 ↗
19. Y. Wu and G. Chiu, An Improved Height Difference Based Model of Height Profile for Drop-on-Demand 3D Printing With UV Curable Ink. 2021 American Control Conference (ACC), 2021. p. 491–495.10.23919/ACC50511.2021.9483241 ↗
20. Y. Wu and G. Chiu, An Improved Model of Height Profile for Drop-On-Demand Print of Ultraviolet Curable Ink, ASME Lett. Dyn. Syst. Control, 2021 https://doi.org/10.1115/1.405001210.1115/1.4050012 ↗
21. Y. Wu and G. Chiu, Error Diffusion Based Feedforward Height Control for Inkjet 3D Printing. 2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), 2023. p 125–131.10.1109/AIM46323.2023.10196116 ↗
22. X. Gao, S. Qi, X. Kuang, Y. Su, J. Li, and D. Wang, Fused Filament Fabrication of Polymer Materials: A Review of Interlayer Bond, Addit. Manuf., 2021, 37, 101658. https://doi.org/10.1016/j.addma.2020.10165810.1016/j.addma.2020.101658 ↗
23. M.S. Kumar, M.U. Farooq, N.S. Ross, C.-H. Yang, V. Kavimani, and A.A. Adediran, Achieving Effective Interlayer Bonding of PLA Parts During the Material Extrusion Process with Enhanced Mechanical Properties, Sci. Rep., 2023, 13(1), p 6800. https://doi.org/10.1038/s41598-023-33510-710.1038/s41598-023-33510-7 ↗
24. F. Tamburrino, S. Graziosi, and M. Bordegoni, The Influence of Slicing Parameters on the Multi-material Adhesion Mechanisms of FDM Printed Parts: An Exploratory Study, Virtual Phys. Prototyp., 2019, 14(4), p 316–332. https://doi.org/10.1080/17452759.2019.160775810.1080/17452759.2019.1607758 ↗
25. N. Sabyrov, A. Abilgaziyev, and M.H. Ali, Enhancing Interlayer Bonding Strength of FDM 3D Printing Technology by Diode Laser-Assisted System, Int. J. Adv. Manuf. Technol., 2020, 108(1), p 603–611. https://doi.org/10.1007/s00170-020-05455-y10.1007/s00170-020-05455-y ↗
26. N.A.M. Radzuan, A.B. Sulong, A. Verma, and N. Muhamad, Layup Sequence and Interfacial Bonding of Additively Manufactured Polymeric Composite: A Brief Review, Nanotechnol. Rev., 2021, 10(1), p 1853–1872.10.1515/ntrev-2021-0116 ↗
27. N. Yu, X. Sun, Z. Wang, D. Zhang, and J. Li, Effects of Auxiliary Heat on the Interlayer Bonds and Mechanical Performance of Polylactide Manufactured Through Fused Deposition Modeling, Polym. Testing, 2021, 104, 107390. https://doi.org/10.1016/j.polymertesting.2021.10739010.1016/j.polymertesting.2021.107390 ↗
28. A.G. Stamopoulos, S. Ilaria Scipioni, and F. Lambiase, Experimental Characterization of the Interlayer Fracture Toughness of FDM Components, Compos. Struct., 2023, 320, 117213. https://doi.org/10.1016/j.compstruct.2023.11721310.1016/j.compstruct.2023.117213 ↗
29. J. Yin, C. Lu, J. Fu, Y. Huang, and Y. Zheng, Interfacial Bonding During Multi-material Fused Deposition Modeling (FDM) Process Due to Inter-molecular Diffusion, Mater. Des., 2018, 150, p 104–112. https://doi.org/10.1016/j.matdes.2018.04.02910.1016/j.matdes.2018.04.029 ↗
30. C. Bellehumeur, L. Li, Q. Sun, and P. Gu, Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process, J. Manuf. Process., 2004, 6(2), p 170–178. https://doi.org/10.1016/S1526-6125(04)70071-710.1016/S1526-6125(04)70071-7 ↗
31. D. Xu, Y. Zhang, and F. Pigeonneau, Thermal Analysis of the Fused Filament Fabrication Printing Process: Experimental and Numerical Investigations, Int. J. Mater. Form., 2021, 14(4), p 763–776. https://doi.org/10.1007/s12289-020-01591-810.1007/s12289-020-01591-8 ↗
32. X. Peng, Y. Han, G. Liu, J. Li, B. Yi, G. Sa et al., Effect of Manufacturing Process Parameters on the Compression and Energy Absorption Properties of 4D-Printed Deformable Honeycomb Structure, Smart Mater. Struct., 2024, 33(7), 075035. https://doi.org/10.1088/1361-665X/ad56e710.1088/1361-665X/ad56e7 ↗
33. B. Akhoundi and A.H. Behravesh, Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products, Exp. Mech., 2019, 59(6), p 883–897. https://doi.org/10.1007/s11340-018-00467-y10.1007/s11340-018-00467-y ↗
34. B. Akhoundi and V. Modanloo, Investigation and Feasibility of Printing Polyoxymethylene Semi-crystalline Polymer Parts with Fused Filament Fabrication 3D Printer and Evaluation of Mechanical Properties of the Printed Samples, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-08619-510.1007/s11665-023-08619-5 ↗
35. M. Galati and P. Minetola, On the Measure of the Aesthetic Quality of 3D Printed Plastic Parts, Int. J. Interact. Des. Manuf. (IJIDeM)., 2020, 14(2), p 381–392. https://doi.org/10.1007/s12008-019-00627-x10.1007/s12008-019-00627-x ↗
36. H. Sadaghian, S. Khodadoost, A. Seifiasl, and R. Buswell, Preliminary Insight Into Torsion of Additively-Manufactured Polylactic Acid (PLA)-Based Polymers. Exp. Mech., 2024, 64, 1443–1464. https://doi.org/10.1007/s11340-024-01105-610.1007/s11340-024-01105-6 ↗
37. G. Sidim, M. Dogu, and B. Ozbek, Manufacturing and Characterization of Continuous Carbon Fiber Reinforced Polyphenylene Sulfide Filaments via Melt Impregnation Method, Polym. Compos., 2024 https://doi.org/10.1002/pc.2902110.1002/pc.29021 ↗
38. M. Sohrabian, A. Masnavian Motlagh, M. Sameezadeh, and M. Kakhki, Heat Treatment of FDM and SLS Delicate Additive Manufacturing Products: Mechanical Properties Enhancement and Dimensional Accuracy. Prog. Addit. Manuf., 2024 https://doi.org/10.1007/s40964-024-00796-610.1007/s40964-024-00796-6 ↗
39. B. Akhoundi, A.H. Behravesh, and S.A. Bagheri, An Innovative Design Approach in Three-Dimensional Printing of Continuous Fiber–Reinforced Thermoplastic Composites via Fused Deposition Modeling Process: In-Melt Simultaneous Impregnation, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2019, 234(1–2), p 243–259. https://doi.org/10.1177/095440541984378010.1177/0954405419843780 ↗
40. D. Vaes, M. Coppens, B. Goderis, W. Zoetelief, and P. Van Puyvelde, The Extent of Interlayer Bond Strength during Fused Filament Fabrication of Nylon Copolymers: An Interplay between Thermal History and Crystalline Morphology, Polymers, 2021 https://doi.org/10.3390/polym1316267710.3390/polym13162677 ↗
41. B. Akhoundi and F. Hajami, Extruded Polymer Instability Study of the Polylactic Acid in Fused Filament Fabrication Process: Printing Speed Effects on Tensile Strength, Polym. Eng. Sci., 2022, 62(12), p 4145–4155. https://doi.org/10.1002/pen.2617410.1002/pen.26174 ↗
42. B. Akhoundi, M. Nabipour, O. Kordi, and F. Hajami, Calculating Printing Speed in Order to Correctly Print PLA/Continuous Glass Fiber Composites via Fused Filament Fabrication 3D Printer, J. Thermoplast. Compos. Mater., 2021, 36(1), p 162–181. https://doi.org/10.1177/089270572199753410.1177/0892705721997534 ↗
43. M. Shi, W. Hu, M. Li, J. Zhang, X. Song, and W. Sun, Ensemble Regression Based on Polynomial Regression-Based Decision Tree and Its Application in the In-Situ Data of Tunnel Boring Machine, Mech. Syst. Signal Process., 2023, 188, 110022. https://doi.org/10.1016/j.ymssp.2022.11002210.1016/j.ymssp.2022.110022 ↗