Effect of Multi-walled Carbon Nanotubes on Material Properties of Spark Plasma Sintered Silicon Nitride-Based Advanced Ceramic Composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. R.C. Dante and C.K. Kajdas, A Review and a Fundamental Theory of Silicon Nitride Tribochemistry, Wear, 2012, 288, p 27–38.10.1016/j.wear.2012.03.001 ↗
2. R. Raga, I. Khader, and, Z. Chlup et al., Damage Initiation and Evolution in Silicon Nitride Under Non-conforming Lubricated Hybrid Rolling Contact, Wear, 2016, 360–361, p 147–159.10.1016/j.wear.2016.05.005 ↗
3. M. Mitomo and S. Uenosono, Microstructural Development During Gas-Pressure Sintering of α-Silicon Nitride, J. Am. Ceram. Soc., 2010, 75, p 103–107.10.1111/j.1151-2916.1992.tb05449.x ↗
4. O. Tapasztó, and, J. Balko et al., Highly Wear-resistant and Low-friction Si3N4 Composites by Addition of Graphene Nanoplatelets Approaching the 2D Limit, Sci. Rep.-UK, 2017, 7, p 10087.10.1038/s41598-017-10290-5 ↗
5. O. Tapaszto, P. Kun, F. Weber, and, G. Gergely et al., Silicon Nitride Based Nanocomposites Produced by Two Different Sintering Methods, Ceram. Int., 2011, 37, p 3457–3461.10.1016/j.ceramint.2011.05.150 ↗
6. L. Kvetková, A. Duszová, and, P. Hvizdoš et al., Fracture Toughness and Toughening Mechanisms in Graphene Platelet Reinforced Si3N4 Composites, Scripta Mater., 2012, 66, p 793–796.10.1016/j.scriptamat.2012.02.009 ↗
7. C. Ramirez, P. Miranzo, and, M. Belmonte et al., Extraordinary Toughening Enhancement and Flexural Strength in Si3N4 Composites Using Graphene Sheets, J. Eur. Ceram. Soc., 2014, 34, p 161–169.10.1016/j.jeurceramsoc.2013.08.039 ↗
8. H. Klemm, Silicon Nitride for High-temperature Applications, J. Am. Ceram. Soc., 2010, 93, p 1501–1522.10.1111/j.1551-2916.2010.03839.x ↗
9. M.J. O’brien, N. Presser, and E.Y. Robinson, Failure Analysis of Three Si3N4 Balls used in Hybrid Bearings, Eng. Technol. Group Aerospace Corporation, 2003, 10, p 453.
10. T.F. Ariff, N.S. Shafie, and Z.M. Zahir, Wear Analysis of Silicon Nitride (Si3N4) Cutting Tool in Dry Machining of T6061 Aluminum Alloy, Appl. Mech. Mater., 2013, 268–270, p 563–567.
11. X. Xu, and, T. Nishimura et al., New Strategies for Preparing Nanosized Silicon Nitride Ceramics, J. Am. Cer. Soc., 2005, 88, p 934.10.1111/j.1551-2916.2005.00187.x ↗
12. M. Kitayama, and, K. Hirao et al., Thermal Conductivity of β-Si3N4:III, Effect of Rare-Earth (RE= La, Nd, Gd, Y, Yb, and Sc) Oxide Additives, J. Am. Cer. Soc., 2001, 84, p 353–358.10.1111/j.1151-2916.2001.tb00662.x ↗
13. F.L. Yu, Y. Bai, and, P.D. Han et al., Spark Plasma Sintering of α/β Si3N4 Ceramics with MgO-Al2O3 and MgO-Y2O3 as Sintering Additives, J. Mater Eng. Perf., 2016, 25, p 5220–5224.10.1007/s11665-016-2372-1 ↗
14. P.F. Becher, and, G.S. Painter et al., Effects of Rare-Earth (RE) Intergranular Adsorption on the Phase Transformation, Microstructure Evolution, and Mechanical Properties in Silicon Nitride with RE20, + Mgo Additives: RE-La, Gd, and Lu, J. Am. Ceram. Soc., 2008, 91(7), p 2328–2336.10.1111/j.1551-2916.2008.02448.x ↗
15. R.L. Satet, M.J. Hoffmann, and R.M. Cannon, Experimental Evidence of the Impact of Rare-Earth Elements on Particle Growth and Mechanical Behaviour of Silicon Nitride, Mater. Sci. Eng., 2006, 422, p 66–76.10.1016/j.msea.2006.01.015 ↗
16. R.L. Satet and M.J. Hoffmann, Influence of the Rare-Earth Element on the Mechanical Properties of RE-Mg Bearing Silicon Nitride, J. Am. Ceram. Soc., 2005, 88(9), p 2485–2490.10.1111/j.1551-2916.2005.00421.x ↗
17. F.L. Riley, Silicon Nitride and Related Materials, J. Am. Ceram. Soc., 2000, 83(2), p 245–265.10.1111/j.1151-2916.2000.tb01182.x ↗
18. W. Liu, W. Tong, and, R. He et al., Effect of the Y2O3 Additive Concentration on the Properties of a Silicon Nitride Ceramic Substrate, Cer. Int., 2016, 42, p 18641–18647.10.1016/j.ceramint.2016.09.001 ↗
19. S.S. Chee, and, M. Jawaid et al., Effects of Nanoclay on Physical and Dimensional Stability of Bamboo/Kenaf/nanoclay Reinforced Epoxy Hybrid Nanocomposites, J. Mater. Res. Tech., 2020, 9, p 5871–5880.10.1016/j.jmrt.2020.03.114 ↗
20. M. Mariam, and, M. Afendi et al., Influence of Hydrothermal Ageing on the Mechanical Properties of an Adhesively Bonded Joint with Different Adherends, Compos. B Eng., 2019, 165, p 572–585.10.1016/j.compositesb.2019.02.032 ↗
21. S.D. Salman, and, Z. Leman et al., Ballistic Impact Resistance of Plain Woven Kenaf/Aramid Reinforced Polyvinyl Butyral Laminated Hybrid Composite, BioResources, 2016, 11(3), p 7282–7295.10.15376/biores.11.3.7282-7295 ↗
22. N.H. Mostafa, and, Z.N. Ismarrubie et al., Effect of Equi-biaxially Fabric Prestressing on the Tensile Performance of Woven E-Glass/Polyester Reinforced Composites, J. Reinforced Plastics Composites., 2016, 35, p 1–11.10.1177/0731684416638553 ↗
23. J.E. Paul Christopher, and, M.T.H. Sultan et al., Manufacturing Challenges in self-Healing Technology for Polymer Composites — A Review, J. Mater. Res. Tech., 2020, 9, p 7370–7379.10.1016/j.jmrt.2020.04.082 ↗
24. A.M. Noor Azammi, and, S.M. Sapuan et al., Physical and Damping Properties of Kenaf Fibre Filled Natural Rubber/Thermoplastic Polyurethane Composites, Defense Technol., 2020, 16, p 29–34.10.1016/j.dt.2019.06.004 ↗
25. X. Wan, and, L. Zhang et al., Elevating Mechanical and Biotribological Properties of Carbon Fiber Composites by Constructing Graphene-Silicon Nitride Nanowires Interlocking Interfacial Enhancement, J. Materiomics., 2024, 10, p 1080–1090.10.1016/j.jmat.2023.11.009 ↗
26. J. Liang, H. Li, and, L. Qi et al., Influence of Ni-CNTs Additions on the Microstructure and Mechanical Properties of Extruded Mg9Al Alloy, Mater. Sci. Eng. A, 2016, 678, p 101–109.10.1016/j.msea.2016.09.089 ↗
27. S. Mazumder, N. Sarkar, and, J.G. Park et al., A Novel Processing Technique for CNTs Growth on Co-Supported Molecular Sieve Coated Porous Ceramics, Mater. Lett., 2015, 161, p 212–215.10.1016/j.matlet.2015.08.097 ↗
28. S. Mazumder, N. Sarkar, and, J.G. Park et al., Carbon Nanotubes-Porous Ceramic Composite by in Situ CCVD Growth of CNTs, Mater. Chem. Phys., 2016, 171, p 247–251.10.1016/j.matchemphys.2016.01.014 ↗
29. S. Pasupuleti, R. Peddetti, and, S. Santhanam et al., Toughening Behavior in a Carbon Nanotube Reinforced Silicon Nitride Composite, Mater. Sci. Eng. A, 2008, 491, p 224–229.10.1016/j.msea.2008.04.058 ↗
30. C. Balazsi, and, F. Weber et al., Application of Carbon Nanotubes to Silicon Nitride Matrix Reinforcements, Curr. Appl. Phy., 2006, 6, p 124–130.10.1016/j.cap.2005.07.024 ↗
31. J. Gonzalez-Julian, and, J. Schneider et al., Enhanced Tribological Performance of Silicon Nitride-Based Materials by Adding Carbon Nanotubes, J. Am. Ceram. Soc., 2011, 94(8), p 2542–2548.10.1111/j.1551-2916.2011.04391.x ↗
32. C. Balazsi, B. Fenyi, and, N. Hegman et al., Development of CNT/Si3N4 Composites with Improved Mechanical and Electrical Properties, Compos. B, 2006, 37, p 418–424.10.1016/j.compositesb.2006.02.006 ↗
33. A. Kovalcikova, and, C. Balazsi et al., Mechanical Properties and Electrical Conductivity in a Carbon Nanotube Reinforced Silicon Nitride Composite, Cer. Int., 2012, 38, p 527–533.10.1016/j.ceramint.2011.07.038 ↗
34. C.S. Balazsi and Z. Shen, Processing of Carbon Nanotube Reinforced Silicon Nitride Composites by Spark Plasma Sintering, Com. Sci. Tech., 2005, 65, p 727–733.10.1016/j.compscitech.2004.10.006 ↗
35. L. Corral, and, H. Wang et al., Effect of Single-Walled Carbon Nanotubes on Thermal and Electrical Properties of Silicon Nitride Processed Using Spark Plasma Sintering, J. Eur. Cer. Soc., 2011, 31, p 391–400.10.1016/j.jeurceramsoc.2010.10.020 ↗
36. M. Belmonte, and, J. Gonzalez-Julian et al., Spark Plasma Sintering: A Powerful Tool to Develop New Silicon Nitride-Based Materials, J. Eur. Cer. Soc., 2010, 30, p 2937–2946.10.1016/j.jeurceramsoc.2010.01.025 ↗
37. C.S. Balazsi, and, O. Tapaszto et al., Structural and Mechanical Properties of Milled Si3N4/cnts Composites by Spark Plasma Sintering Method, Mater. Sci. Forum, 2013, 729, p 31–36.10.4028/www.scientific.net/MSF.729.31 ↗
38. M. Matsuoka, and, J. Tatami et al., Improvement of Strength of Carbon Nanotube-Dispersed Si3N4 Ceramics by Bead Milling and Adding Lower-Temperature Sintering Aids, J. Asian Ceram. Soc., 2014, 2, p 199–203.10.1016/j.jascer.2014.02.005 ↗
39. C. Tian, and, H. Jiang et al., Preparation and Mechanical Properties of Carbon Nanotube-Silicon Nitride Nano-Ceramic Matrix Composites, IOP Conf. Ser. Mater. Sci. Eng., 2018, 292, p 12076.10.1088/1757-899X/292/1/012076 ↗
40. S. Yoshio, and, J. Tatami et al., Effect of CNT Quantity and Sintering Temperature on Electrical and Mechanical Properties of CNT-Dispersed Si3N4 Ceramics, J. Cer. Soc. Japan., 2011, 119, p 70–75.10.2109/jcersj2.119.70 ↗
41. P. Ge, and, K. Sun et al., Improving the Electrical and Microwave Absorbing Properties of Si3N4 Ceramics with Carbon Nanotube Fibers, Ceram. Int., 2018, 44, p 2727–2731.10.1016/j.ceramint.2017.10.233 ↗
42. Bozkurt, D., and, Kaplan, M., et al. Microstructure and Mechanical Properties of Si3N4 Based Biocomposites. IMMC. 2018, 753-756
43. M. Osendi, and, F. Gautheron et al., Dense and Homogenous Silicon Nitride Composites Containing Carbon Nanotubes, Amer. Sci Pub., 2009, 9, p 6188–6194.
44. J. Sun, and, L. Gao et al., Failure Investigation of Carbon Nanotube/3Y-TZP Nanocomposites, Ceram. Int., 2005, 31, p 1131–1134.10.1016/j.ceramint.2004.11.010 ↗
45. Mir, A.H., and, Ahmad, S. A study on fabrication of silicon nitride-based advanced ceramic composite materials via spark plasma sintering. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2021, 235(8), 1739-1756.10.1177/14644207211013560 ↗
46. J. Fu, J.C. Brouwer, I.M. Richardson, and M.J.M. Hermans, Effect of Mechanical Alloying and Spark Plasma Sintering on the Microstructure and Mechanical Properties of ODS Eurofer, Mat Design, 2019, 177, 107849.10.1016/j.matdes.2019.107849 ↗
47. D.K. Shetty, I.G. Wright, and, P.N. Mincer et al., Indentation Fracture of WC-Co Cermets, J. Mater. Sci., 1985, 20, p 1873–1882.10.1007/BF00555296 ↗
48. X. Wang, M. Fang, and, L.C. Zhang et al., Solid Particle Erosion of Alumina Ceramics at Elevated Temperature, Mater. Chem. Phys., 2013, 139, p 765–769.10.1016/j.matchemphys.2013.02.029 ↗
49. K.T. Arun, G. Anand, and, R. Subbiah et al., Effect of Multiwalled Carbon Nanotubes on Improvement of Fracture Toughness of Spark-Plasma-Sintered Yttria-Stabilized Zirconia Nanocomposites, J. Mater. Eng. Perform., 2021, 30, p 3925–3933.10.1007/s11665-021-05562-1 ↗
50. C. Gazzara, Determination of Phase Content of Silicon Nitride by X-ray Diffraction Analysis, J. Am. Ceram. Soc., 1977, 78, p 1076–1078.
51. T. Bai and T. Xie, Fabrication and Mechanical Properties of WC-Al2O3 Cemented Carbide Reinforced by CNTs, Mat. Chem. phys., 2017, 201, p 113–119.10.1016/j.matchemphys.2017.08.018 ↗
52. A. Peigney, and, C. Laurent et al., Specific Surface Area of Carbon Nanotubes and Bundles of Carbon Nanotubes, Carbon, 2000, 38(4), p 507–514.10.1016/S0008-6223(00)00155-X ↗
53. Y. Zhu, and, Z. Li et al., Mechanical Properties of Multi-Walled Carbon Nanotubes Reinforced Silicon Nitride Composite, J. Eur. Cer. Soc., 2005, 25(13), p 3773–3779.
54. J. Fan, and, W. Jiang et al., Mechanical Properties and Microstructure of Multi-Walled Carbon Nanotubes Reinforced Alumina Composites, Cer. International., 2009, 35(7), p 3161–3164.
55. W. Koji, and, H. Kiyoshi et al., Thermal Conductivity and Phonon Scattering Mechanisms of β -Si3N4 Ceramics, Cer. Mater. Comp. Engines., 2001 https://doi.org/10.1002/9783527612765.ch8410.1002/9783527612765.ch84 ↗
56. S.K. Sharma, and, B.B.V. Manoj Kumar et al., Erosion Behavior of SiC-WC Composites, Cer. Int., 2014, 40, p 6829–6839.10.1016/j.ceramint.2013.11.146 ↗
57. J.G. Chacon-Nava, and, F.H. Stott et al., Erosion of Al2O3 and SiC at Low Impact Velocities, Mater. lett., 2002, 55, p 269–273.10.1016/S0167-577X(01)00659-0 ↗
58. J.L. Routbort, and, R.O. Scattergood et al., The Erosion of Reaction Bonded SiC, Wear, 1980, 59, p 363–375.10.1016/0043-1648(80)90194-5 ↗