Investigation of Water-Based Hybrid Nanofluid on Tribological Performance in Minimum Quantity Lubrication Grinding of Nimonic-90 Superalloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Lubricants and Their Additives · Advanced machining processes and optimization · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. S. Malkin and C. Guo, Grinding Technology: Theory and Applications of Machining with Abrasives, 2nd ed. Industrial Press, New York, 2008.
2. A. Azami, Z. Salahshournejad, E. Shakouri, A.R. Sharifi, and P. Saraeian, Influence of Nano-Minimum Quantity Lubrication with MoS2 and CuO Nanoparticles on Cutting Forces and Surface Roughness during Grinding of AISI D2 Steel, J. Manuf. Process., 2023, 87(January), p 209–220. https://doi.org/10.1016/j.jmapro.2023.01.02910.1016/j.jmapro.2023.01.029 ↗
3. S. Guo, C. Li, Y. Zhang, Y. Wang, B. Li, M. Yang, X. Zhang, and G. Liu, Experimental Evaluation of the Lubrication Performance of Mixtures of Castor Oil with Other Vegetable Oils in MQL Grinding of Nickel-Based Alloy, J. Clean. Prod., 2017, 140, p 1060–1076. https://doi.org/10.1016/j.jclepro.2016.10.07310.1016/j.jclepro.2016.10.073 ↗
4. J. Zhang, C. Li, Y. Zhang, M. Yang, D. Jia, G. Liu, Y. Hou, R. Li, N. Zhang, Q. Wu, and H. Cao, Experimental Assessment of an Environmentally Friendly Grinding Process Using Nanofluid Minimum Quantity Lubrication with Cryogenic Air, J. Clean. Prod., 2018, 193, p 236–248. https://doi.org/10.1016/j.jclepro.2018.05.00910.1016/j.jclepro.2018.05.009 ↗
5. D. Setti, M.K. Sinha, S. Ghosh, and P. Venkateswara Rao, Performance Evaluation of Ti-6Al-4V Grinding Using Chip Formation and Coefficient of Friction under the Influence of Nanofluids, Int. J. Mach. Tools Manuf., 2015, 88, p 237–248.10.1016/j.ijmachtools.2014.10.005 ↗
6. J.C. Lopes, M.V. Garcia, R.S. Volpato, H.J. De Mello, F. Sabino, F. Ribeiro, L. Eduardo, D.A. Sanchez, K.D.O. Rocha, L.D. Neto, P.R. Aguiar, and E.C. Bianchi, Application of MQL Technique Using TiO2 Nanoparticles Compared to MQL Simultaneous to the Grinding Wheel Cleaning Jet, Int. J. Adv. Manuf. Technol., 2020, 106, p 2205–2218.10.1007/s00170-019-04760-5 ↗
7. K.C. Wickramasinghe, H. Sasahara, E.A. Rahim, and G.I.P. Perera, Green Metalworking Fluids for Sustainable Machining Applications: A Review, J. Clean. Prod., 2020, 257, p 120552. https://doi.org/10.1016/j.jclepro.2020.12055210.1016/j.jclepro.2020.120552 ↗
8. R. Madarkar, S. Agarwal, P. Attar, S. Ghosh, and P.V.V. Rao, Application of Ultrasonic Vibration Assisted MQL in Grinding of Ti-6Al-4V, Mater. Manuf. Process., 2018, 33(13), p 1445–1452.10.1080/10426914.2017.1415451 ↗
9. A.S. Awale, M. Vashista, and M.Z. Khan Yusufzai, Multi-objective Optimization of MQL Mist Parameters for Eco-Friendly Grinding, J. Manuf. Process., 2020, 56(November 2019), p 75–86.10.1016/j.jmapro.2020.04.069 ↗
10. K. Kishore, S.R. Chauhan, and M.K. Sinha, Investigation on Grindability Improvement of Inconel 625 Using Multi-Walled Carbon Nanotubes Nanofluids-Assisted Minimum Quantity Lubrication Surface Grinding, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-09648-410.1007/s11665-024-09648-4 ↗
11. C. Li, Y. Zhang, and Z. Said, Enhanced Manufacture Technology Based on Emission Reduction and Carbon Reduction in Cutting and Grinding, Int. J. Adv. Manuf. Technol., 2024 https://doi.org/10.1007/s00170-024-13216-410.1007/s00170-024-13216-4 ↗
12. Y. Wang and C. Liu, State-of-the-Art on Minimum Quantity Lubrication in Green Machining, J. Clean. Prod., 2023, 429(July), p 139613. https://doi.org/10.1016/j.jclepro.2023.13961310.1016/j.jclepro.2023.139613 ↗
13. B.K. Sato, J.C. Lopes, R.L. Rodriguez, M.V. Garcia, M. Mia, F.S.F. Ribeiro, L.E.D.A. Sanchez, P.R. Aguiar, and E.C. Bianchi, Novel Comparison Concept between CBN and Al2O3 Grinding Process for Eco-Friendly Production, J. Clean. Prod., 2021, 2022, p 330.
14. U.S. Stephen and A.A. Eastman, Enhancing Thermal Conductivity of Fluids with Nanoparticles, ASME-Publications-Fed, 1995, p 99–105
15. Y. Wang, C. Li, Y. Zhang, M. Yang, X. Zhang, N. Zhang, and J. Dai, Experimental Evaluation on Tribological Performance of the Wheel/Workpiece Interface in Minimum Quantity Lubrication Grinding with Different Concentrations of Al2O3 Nanofluids, J. Clean. Prod., 2017, 142, p 3571–3583.10.1016/j.jclepro.2016.10.110 ↗
16. B.C. Behera, S. Ghosh, and P.V. Rao, Application of Nanofluids during Minimum Quantity Lubrication: A Case Study in Turning Process, Tribol. Int., 2016, 101, p 234–246.10.1016/j.triboint.2016.04.019 ↗
17. R.W. Maruda, K. Arkusz, N. Szczotkarz, S. Wojciechowski, P. Niesłony, and G.M. Królczyk, Analysis of Size and Concentration of Nanoparticles Contained in Cutting Fluid during Turning of 316L Steel in Minimum Quantity Lubrication Conditions, J. Manuf. Process., 2023, 87(September 2022), p 106–122.10.1016/j.jmapro.2022.12.065 ↗
18. M. Alberts, K. Kalaitzidou, and S. Melkote, An Investigation of Graphite Nanoplatelets as Lubricant in Grinding, Int. J. Mach. Tools Manuf., 2009, 49(12–13), p 966–970. https://doi.org/10.1016/j.ijmachtools.2009.06.00510.1016/j.ijmachtools.2009.06.005 ↗
19. Y. Su, L. Gong, B. Li, Z. Liu, and D. Chen, Performance Evaluation of Nanofluid MQL with Vegetable-Based Oil and Ester Oil as Base Fluids in Turning, Int. J. Adv. Manuf. Technol., 2016, 83(9–12), p 2083–2089.10.1007/s00170-015-7730-x ↗
20. S.F. Hosseini, M. Emami, and M.H. Sadeghi, An Experimental Investigation on the Effects of Minimum Quantity Nano Lubricant Application in Grinding Process of Tungsten Carbide, J. Manuf. Process., 2018, 35(August), p 244–253.10.1016/j.jmapro.2018.08.007 ↗
21. F. Pashmforoush and R. Delir Bagherinia, Influence of Water-Based Copper Nanofluid on Wheel Loading and Surface Roughness during Grinding of Inconel 738 Superalloy, J. Clean. Prod., 2018, 178, p 363–372. https://doi.org/10.1016/j.jclepro.2018.01.00310.1016/j.jclepro.2018.01.003 ↗
22. R.L. Virdi, S.S. Chatha, and H. Singh, Machining Performance of Inconel-718 Alloy under the Influence of Nanoparticles Based Minimum Quantity Lubrication Grinding, J. Manuf. Process., 2020, 59(October), p 355–365.10.1016/j.jmapro.2020.09.056 ↗
23. R.B. Pavan, A. Venu Gopal, M. Amrita, and B.K. Goriparthi, Experimental Investigation of Graphene Nanoplatelets-Based Minimum Quantity Lubrication in Grinding Inconel 718, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2019, 233(2), p 400–410. https://doi.org/10.1177/095440541772831110.1177/0954405417728311 ↗
24. V. Eswaraiah, V. Sankaranarayanan, and S. Ramaprabhu, Graphene-Based Engine Oil Nanofluids for Tribological Applications, ACS Appl. Mater. Interfaces, 2011, 3(11), p 4221–4227. https://doi.org/10.1021/am200851z10.1021/am200851z ↗
25. A. Mohamed, M. Ibrahim, W. Li, H. Xiao, Z. Zeng, Y. Ren, and M.S. Alsoufi, Energy Conservation and Environmental Sustainability during Grinding Operation of Ti-6Al-4V Alloys via Eco-Friendly Oil/Graphene Nano Additive and Minimum Quantity Lubrication, Tribol. Int., 2020 https://doi.org/10.1016/j.triboint.2020.10638710.1016/j.triboint.2020.106387 ↗
26. X. Cui, C. Li, Y. Zhang, W. Ding, Q. An, B. Liu, H.N. Li, Z. Said, S. Sharma, R. Li, and S. Debnath, Comparative Assessment of Force, Temperature, and Wheel Wear in Sustainable Grinding Aerospace Alloy Using Biolubricant, Front. Mech. Eng., 2023, 18(1), p 1–33.10.1007/s11465-022-0719-x ↗
27. S.K. Yadav, S. Ghosh, and A. Sivanandam, Surfactant Free Enhancement to Thermophysical and Tribological Performance of Bio-Degradable Lubricant with Nano-Friction Modifier for Sustainable End Milling of Incoloy 925, J. Clean. Prod., 2023, 428(July), p 139456. https://doi.org/10.1016/j.jclepro.2023.13945610.1016/j.jclepro.2023.139456 ↗
28. Y. Wang, C. Li, Y. Zhang, B. Li, M. Yang, X. Zhang, S. Guo, and G. Liu, Experimental Evaluation of the Lubircation Properties of the Wheel/Workpiece Interface in MQL Grinding with Different Nanofluids, Tribiol. Int., 2016, 99, p 198–210. https://doi.org/10.1016/j.triboint.2016.03.02310.1016/j.triboint.2016.03.023 ↗
29. K. Kishore, M.K. Sinha, A. Singh, Archana, M.K. Gupta, and M.E. Korkmaz, A Comprehensive Review on the Grinding Process: Advancements, Applications and Challenges, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 2022, 236(22), p 10923–10952.10.1177/09544062221110782 ↗
30. A.K. Singh, A. Kumar, V. Sharma, and P. Kala, Sustainable Techniques in Grinding: State of the Art Review, J. Clean. Prod., 2020, 269, p 121876. https://doi.org/10.1016/j.jclepro.2020.12187610.1016/j.jclepro.2020.121876 ↗
31. S. Qu, P. Yao, Y. Gong, D. Chu, Y. Yang, C. Li, Z. Wang, X. Zhang, and Y. Hou, Environmentally Friendly Grinding of C/SiCs Using Carbon Nanofluid Minimum Quantity Lubrication Technology, J. Clean. Prod., 2022, 366(June), p 132898. https://doi.org/10.1016/j.jclepro.2022.13289810.1016/j.jclepro.2022.132898 ↗
32. L.S. Sundar, K.V. Sharma, M.K. Singh, and A.C.M. Sousa, Hybrid Nanofluids Preparation, Thermal Properties, Heat Transfer and Friction Factor—A Review, Renew. Sustain. Energy Rev., 2017, 68(March 2016), p 185–198. https://doi.org/10.1016/j.rser.2016.09.10810.1016/j.rser.2016.09.108 ↗
33. R.K. Singh, A.K. Sharma, A.R. Dixit, A.K. Tiwari, A. Pramanik, and A. Mandal, Performance Evaluation of Alumina-Graphene Hybrid Nano-cutting Fluid in Hard Turning, J. Clean. Prod., 2017, 162, p 830–845. https://doi.org/10.1016/j.jclepro.2017.06.10410.1016/j.jclepro.2017.06.104 ↗
34. F. Rabiei, A.R. Rahimi, and M.J. Hadad, Performance Improvement of Eco-Friendly MQL Technique by Using Hybrid Nanofluid and Ultrasonic-Assisted Grinding, Int. J. Adv. Manuf. Technol., 2017, 93(1–4), p 1001–1015.10.1007/s00170-017-0521-9 ↗
35. A.K. Sharma, R.K. Singh, A.R. Dixit, and A.K. Tiwari, Novel Uses of Alumina-MoS2 Hybrid Nanoparticle Enriched Cutting Fluid in Hard Turning of AISI 304 Steel, J. Manuf. Process., 2017, 30, p 467–482. https://doi.org/10.1016/j.jmapro.2017.10.01610.1016/j.jmapro.2017.10.016 ↗
36. S. Suresh, K.P. Venkitaraj, P. Selvakumar, and M. Chandrasekar, Effect of Al2O3-Cu/Water Hybrid Nanofluid in Heat Transfer, Exp. Therm. Fluid Sci., 2012, 38, p 54–60.10.1016/j.expthermflusci.2011.11.007 ↗
37. X. Zhang, C. Li, Y. Zhang, D. Jia, B. Li, Y. Wang, M. Yang, Y. Hou, and X. Zhang, Performances of Al2O3/SiC Hybrid Nanofluids in Minimum-Quantity Lubrication Grinding, Int. J. Adv. Manuf. Technol., 2016, 86(9–12), p 3427–3441. https://doi.org/10.1007/s00170-016-8453-310.1007/s00170-016-8453-3 ↗
38. N. Ahammed, L.G. Asirvatham, and S. Wongwises, Entropy Generation Analysis of Graphene-Alumina Hybrid Nanofluid in Multiport Minichannel Heat Exchanger Coupled with Thermoelectric Cooler, Int. J. Heat Mass Transf., 2016, 103, p 1084–1097. https://doi.org/10.1016/j.ijheatmasstransfer.2016.07.07010.1016/j.ijheatmasstransfer.2016.07.070 ↗
39. H. Singh, V.S. Sharma, and M. Dogra, Exploration of Graphene Assisted Vegetables Oil Based Minimum Quantity Lubrication for Surface Grinding of TI-6AL-4V-ELI, Tribol. Int., 2020, 144, p 106113. https://doi.org/10.1016/j.triboint.2019.10611310.1016/j.triboint.2019.106113 ↗
40. J. Huang, J. Tan, H. Fang, F. Gong, and J. Wang, Tribological and Wear Performances of Graphene-Oil Nanofluid under Industrial High-Speed Rotation, Tribiology Int., 2019, 135(November 2018), p 112–120. https://doi.org/10.1016/j.triboint.2019.02.04110.1016/j.triboint.2019.02.041 ↗
41. H. Singh, V.S. Sharma, S. Singh, and M. Dogra, Nanofluids Assisted Environmental Friendly Lubricating Strategies for the Surface Grinding of Titanium Alloy: Ti6Al4V-ELI, J. Manuf. Process., 2019, 39(January), p 241–249.10.1016/j.jmapro.2019.02.004 ↗
42. X. Zhang, C. Li, Y. Zhang, Y. Wang, B. Li, M. Yang, S. Guo, G. Liu, and N. Zhang, Lubricating Property of MQL Grinding of Al2O3/SiC Mixed Nanofluid with Different Particle Sizes and Microtopography Analysis by Cross-Correlation, Precis. Eng., 2017, 47, p 532–545. https://doi.org/10.1016/j.precisioneng.2016.09.01610.1016/j.precisioneng.2016.09.016 ↗
43. D.C. Lou, J.K. Solberg, O.M. Akselsen, and N. Dahl, Microstructure and Property Investigation of Paste Boronized Pure Nickel and Nimonic 90 Superalloy, Mater. Chem. Phys., 2009, 115(1), p 239–244.10.1016/j.matchemphys.2008.11.055 ↗
44. M.J. Donachie and S.J. Donachie, SUPERALLOYS A Technical Guide, ASM International, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
45. N.K. Sah, R. Singh, and V. Sharma, Experimental Investigations into Thermophysical, Wettability and Tribological Characteristics of Ionic Liquid Based Metal Cutting Fluids, J. Manuf. Process., 2021, 65(February), p 190–205.10.1016/j.jmapro.2021.03.019 ↗
46. K.K. Gajrani, P. Suvin, S.V. Kailas, and R.S. Mamilla, Thermal, Rheological, Wettability and Hard Machining Performance of MoS2 and CaF2 Based Minimum Quantity Hybrid Nano-Green Cutting Fluids, J. Mater. Process. Technol., 2019, 266, p 125–139. https://doi.org/10.1016/j.jmatprotec.2018.10.03610.1016/j.jmatprotec.2018.10.036 ↗
47. J. Sarkar, P. Ghosh, and A. Adil, A Review on Hybrid Nanofluids: Recent Research, Development and Applications, Renew. Sustain. Energy Rev., 2015, 43, p 164–177. https://doi.org/10.1016/j.rser.2014.11.02310.1016/j.rser.2014.11.023 ↗
48. R. Singh, J.S. Dureja, M. Dogra, M. Kumar, M. Mia, and Q. Song, Wear Behavior of Textured Tools under Graphene-Assisted Minimum Quantity Lubrication System in Machining Ti-6Al-4V Alloy, Tribol. Int., 2020, 145(September), p 106183. https://doi.org/10.1016/j.triboint.2020.10618310.1016/j.triboint.2020.106183 ↗
49. A. Asadi and F. Pourfattah, Heat Transfer Performance of Two Oil-Based Nanofluids Containing ZnO and MgO Nanoparticles; A Comparative Experimental Investigation, Powder Technol., 2019, 343, p 296–308.10.1016/j.powtec.2018.11.023 ↗
50. G. Puliti, S. Paolucci, and M. Sen, Nanofluids and Their Properties, Appl. Mech. Rev., 2012, 64(3), p 1–23. https://doi.org/10.1115/1.400549210.1115/1.4005492 ↗
51. S. Chakraborty and P.K. Panigrahi, Stability of Nanofluid: A Review, Appl. Therm. Eng., 2020, 174(April), p 115259.10.1016/j.applthermaleng.2020.115259 ↗
52. R. Choudhary, D. Khurana, A. Kumar, and S. Subudhi, Stability Analysis of Al2O3/Water Nanofluids, J. Exp. Nanosci., 2017, 12(1), p 140–151. https://doi.org/10.1080/17458080.2017.128544510.1080/17458080.2017.1285445 ↗
53. K. Manojkumar and A. Ghosh, Assessment of Cooling-Lubrication and Wettability Characteristics of Nano-engineered Sunflower Oil as Cutting Fluid and Its Impact on SQCL Grinding Performance, J. Mater. Process. Technol., 2016, 237, p 55–64. https://doi.org/10.1016/j.jmatprotec.2016.05.03010.1016/j.jmatprotec.2016.05.030 ↗
54. A. Chaudhari, A.S. Awale, and A.K. Chakrabarti, Surface Integrity Characterization of Austenitic, Martensitic and Ferritic Stainless Steel under Different Grinding Process, Mater. Res. Express, 2019, 6(11), p 11659. https://doi.org/10.1088/2053-1591/ab4f2210.1088/2053-1591/ab4f22 ↗
55. J. Yang, Y. Xia, H. Song, B. Chen, and Z. Zhang, Synthesis of the Liquid-Like Graphene with Excellent Tribological Properties, Tribol. Int., 2017, 105(July 2016), p 118–124. https://doi.org/10.1016/j.triboint.2016.09.04010.1016/j.triboint.2016.09.040 ↗
56. A.K. Sharma, A.K. Tiwari, A.R. Dixit, R.K. Singh, and M. Singh, Novel Uses of Alumina/Graphene Hybrid Nanoparticle Additives for Improved Tribological Properties of Lubricant in Turning Operation, Tribol. Int., 2018, 119(November 2017), p 99–111. https://doi.org/10.1016/j.triboint.2017.10.03610.1016/j.triboint.2017.10.036 ↗