Influence of Printing-Based Factors on the Mechanical Performance of PLA/PLA with Ceramic Reinforcement 3D-Printed Specimens
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. N. Ranjan, R. Singh, and I.P.S. Ahuja, Development of PLA-HAp-CS-Based Biocompatible Functional Prototype: A Case Study, J. Thermoplast. Compos. Mater., 2020, 33, p 305–323. https://doi.org/10.1177/089270571880553110.1177/0892705718805531 ↗
2. N. Ranjan, R. Singh, I.P.S. Ahuja, M. Rahman, and S. Ramakrishna, PLA-HAp-CS-Based Biocompatible Scaffolds Prepared Through Micro-Additive Manufacturing: A Review and Future Applications, 3D Printing in Biomedical Engineering. S. Singh, C. Prakash, R. Singh Ed., Springer Singapore, Singapore, 2020, p 209–22910.1007/978-981-15-5424-7_10 ↗
3. N. Ranjan, R. Singh, and I.P.S. Ahuja, Investigations for Mechanical Properties of PLA-HAp-CS Based Functional Prototypes, Mater. Today Proc., 2019, 18, p 2329–2334. https://doi.org/10.1016/j.matpr.2019.07.01610.1016/j.matpr.2019.07.016 ↗
4. Y. Xu, F. Zhang, W. Zhai, S. Cheng, J. Li, and Y. Wang, Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds, Polymers (Basel), 2022, 14, p 566. https://doi.org/10.3390/polym1403056610.3390/polym14030566 ↗
5. N. Ranjan, R. Singh, I.P.S. Ahuja, R. Kumar, D. Singh, S. Ramniwas, A.K. Verma, and D. Mittal, 3D Printed Scaffolds for Tissue Engineering Applications: Mechanical, Morphological, Thermal, In-vitro and In-vivo Investigations, CIRP J. Manuf. Sci. Technol., 2021, 32, p 205–216. https://doi.org/10.1016/j.cirpj.2021.01.00210.1016/j.cirpj.2021.01.002 ↗
6. F. Li, J. Gan, L. Zhang, H. Tan, E. Li, and B. Li, Enhancing Impact Resistance of Hybrid Structures Designed with Triply Periodic Minimal Surfaces, Compos. Sci. Technol., 2024, 245, p 110365. https://doi.org/10.1016/j.compscitech.2023.11036510.1016/j.compscitech.2023.110365 ↗
7. R. Li, G. Ju, X. Zhao, Y. Zhang, Y. Li, G. Hu, M. Yan, Y. Wu, and D. Lin, Simulation of Residual Stress and Distortion Evolution in Dual-Robot Collaborative Wire-Arc Additive Manufactured Al-Cu Alloys, Virtual Phys. Prototyp., 2024 https://doi.org/10.1080/17452759.2024.240939010.1080/17452759.2024.2409390 ↗
8. C. Yang, Z. Li, P. Xu, and H. Huang, Recognition and Optimisation Method of Impact Deformation Patterns Based on Point Cloud and Deep Clustering: Applied to Thin-Walled Tubes, J. Ind. Inf. Integr., 2024, 40, p 100607. https://doi.org/10.1016/j.jii.2024.10060710.1016/j.jii.2024.100607 ↗
9. R. Alkabbanie, B. Aktas, G. Demircan, and S. Yalcin, Short Carbon Fiber-Reinforced PLA Composites: Influence of 3D-Printing Parameters on the Mechanical and Structural Properties, Iran. Polym. J. (Engl. Ed.), 2024, 33, p 1065–1074. https://doi.org/10.1007/s13726-024-01315-810.1007/s13726-024-01315-8 ↗
10. B. Aktas, R. Das, A. Acikgoz, G. Demircan, S. Yalcin, H.G. Aktas, and M.V. Balak, DLP 3D Printing of TiO2-Doped Al2O3 Bioceramics: Manufacturing, Mechanical Properties, and Biological Evaluation, Mater. Today Commun., 2024, 38, p 107872. https://doi.org/10.1016/j.mtcomm.2023.10787210.1016/j.mtcomm.2023.107872 ↗
11. N. Bharat, V. Kumar, V. Mishra, D. Veeman, and M. Vellaisamy, Influence of 3D Printing FDM Process Parameters on Compressive Strength of PLA/Carbon Fiber Composites: ANOVA and Backpropagation Neural Network Approach. J. Mater. Eng. Perform., 2025, p 1–14. https://doi.org/10.1007/s11665-025-10783-910.1007/s11665-025-10783-9 ↗
12. X. Peng, Y. Han, G. Liu, J. Li, B. Yi, G. Sa, and S. Jiang, Effect of Manufacturing Process Parameters on the Compression and Energy Absorption Properties of 4D-Printed Deformable Honeycomb Structure, Smart Mater. Struct., 2024, 33, 075035. https://doi.org/10.1088/1361-665X/ad56e710.1088/1361-665X/ad56e7 ↗
13. R. Xue, P. Yuan, B. Zhao, F. Jing, X. Kou, W. Yue, Y. Wang, D. Wang, G.A. Sewvandi, and D. Hu, DLP Printing of BT/HA Nanocomposite Ceramic Scaffolds Using Low Refractive Index BT Crystals, J. Materiomics, 2024, 10, p 1036–1048. https://doi.org/10.1016/j.jmat.2023.11.00410.1016/j.jmat.2023.11.004 ↗
14. H. Wang, D. Qian, F. Wang, Z. Dong, and J. Chen, Predictive Mechanical Property and Fracture Behavior in High-Carbon Steel Containing High-Density Carbides Via Artificial RVE Modeling, Mater. Des., 2024, 247, p 113383. https://doi.org/10.1016/j.matdes.2024.11338310.1016/j.matdes.2024.113383 ↗
15. V. Kumar, N. Bharat, V. Mishra, D. Veeman, and M. Vellaisamy, Flexural Strength Evolution of 3D-Printed PLA Structures: An Experimental Investigation, JOM, 2025, p 1–11. https://doi.org/10.1007/s11837-024-07092-210.1007/s11837-024-07092-2 ↗
16. Q. Fan, H. Duan, and X. Xing, A Review of Composite Materials for Enhancing Support, Flexibility and Strength in Exercise, Alex. Eng. J., 2024, 94, p 90–103. https://doi.org/10.1016/j.aej.2024.03.04810.1016/j.aej.2024.03.048 ↗
17. A. Thirugnanasamabandam, B. Prabhu, V. Mageswari, V. Murugan, K. Ramachandran, and K. Kadirgama, Wood Flour / Ceramic Reinforced Polylactic Acid Based 3D - Printed Functionally Grade Structural Material for Integrated Engineering Applications: A Numerical and Experimental Characteristic Investigation, Int. J. Lightweight Mater. Manuf., 2024 https://doi.org/10.1016/j.ijlmm.2024.08.00310.1016/j.ijlmm.2024.08.003 ↗
18. L. Hedjazi, S. Guessasma, S. Belhabib, and N. Stephant, On the Mechanical Performance of Polylactic Material Reinforced by Ceramic in Fused Filament Fabrication, Polymers (Basel), 2022, 14, p 2924. https://doi.org/10.3390/polym1414292410.3390/polym14142924 ↗
19. M. Petousis, N. Vidakis, N. Mountakis, A. Moutsopoulou, V. Papadakis, and E. Maravelakis, On the Substantial Mechanical Reinforcement of Polylactic Acid with Titanium Nitride Ceramic Nanofillers in Material Extrusion 3D Printing, Ceram. Int., 2023, 49, p 16397–16411. https://doi.org/10.1016/j.ceramint.2023.02.00110.1016/j.ceramint.2023.02.001 ↗
20. W. Ahmed, S. Siraj, and A.H. Al-Marzouqi, 3d Printing Pla Waste to Produce Ceramic Based Particulate Reinforced Composite Using Abundant Silica-Sand: Mechanical Properties Characterization, Polymers (Basel), 2020, 12, p 1–19. https://doi.org/10.3390/polym1211257910.3390/polym12112579 ↗
21. C. Gauss, K.L. Pickering, N. Graupner, and J. Müssig, 3D-Printed Polylactide Composites Reinforced with Short Lyocell Fibres – Enhanced Mechanical Properties Based on Bio-Inspired Fibre Fibrillation and Post-Print Annealing, Addit. Manuf., 2023, 77, p 103806. https://doi.org/10.1016/j.addma.2023.10380610.1016/j.addma.2023.103806 ↗
22. I. Fortelny, A. Ujcic, L. Fambri, and M. Slouf, Phase Structure Compatibility, and Toughness of PLA/PCL Blends: A Review, Front. Mater., 2019, 6, p 206. https://doi.org/10.3389/fmats.2019.0020610.3389/fmats.2019.00206 ↗
23. N. Ranjan, R. Singh, and I.P.S. Ahuja, Investigations on Joining of Orthopaedic Scaffold with Rapid Tooling, Proc. Inst. Mech. Eng. H, 2019, 233, p 754–760. https://doi.org/10.1177/095441191985281110.1177/0954411919852811 ↗
24. N. Ranjan, R. Singh, I.P. Ahuja, and J. Singh, Fabrication of PLA-HAp-CS Based Biocompatible and Biodegradable Feedstock Filament Using Twin Screw Extrusion, Additive Manufacturing of Emerging Materials. B. AlMangour Ed., Springer International Publishing, Cham, 2019, p 325–34510.1007/978-3-319-91713-9_11 ↗
25. D.S. Nakonieczny, F. Kern, L. Dufner, M. Antonowicz, and K. Matus, Alumina and Zirconia-Reinforced Polyamide pa-12 Composites for Biomedical Additive Manufacturing, Materials, 2021, 14, p 6201. https://doi.org/10.3390/ma1420620110.3390/ma14206201 ↗