Impact of Heat Treatment on Microstructure and Mechanical Characteristics of Laser Powder Bed Fused Ti-6Al-4V Alloy: A Comprehensive Investigation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. M. Peters, J. Kumpfert, C.H. Ward, and C. Leyens, Titanium alloys for aerospace applications, Adv. Eng. Mater., 2003, 5(6), p 419–427. https://doi.org/10.1002/adem.20031009510.1002/adem.200310095 ↗
2. M. Geetha, A.K. Singh, R. Asokamani, and A.K. Gogia, Ti based biomaterials, the ultimate choice for orthopaedic implants–A review, Prog. Mater. Sci., 2009, 54(3), p 397–425. https://doi.org/10.1016/j.pmatsci.2008.06.00410.1016/j.pmatsci.2008.06.004 ↗
3. M. Rizwee, D. Kumar, and M.M. Husain, Enhancing the tribological characteristics of the biocompatible Ti-6Al-4 V alloy via heat treatment: an experimental analysis, Tribol. Int., 2024, 199, p 110052. https://doi.org/10.1016/j.triboint.2024.11005210.1016/j.triboint.2024.110052 ↗
4. Z. Yang, Y. Jia, Y. Zhang, S. Hou, and N. Sun, Solidification microstructure and mechanical properties of laser additive manufactured Near-α Ti-6Al-3Nb-2Zr-1Mo titanium alloy, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-09219-710.1007/s11665-024-09219-7 ↗
5. R.B.-M.S. and E. A, U. (1996) An overview on the use of titanium in the aerospace industry, Elsevier
6. S. Zhou, L. Wang, J. An, X. Wang, B. Wu, and X. Zhang, Effect of heat treatment on microstructure and mechanical properties of TA15 titanium alloy repaired by laser deposition, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-022-06959-210.1007/s11665-022-06959-2 ↗
7. R. Huang, M. Riddle, D. Graziano, J. Warren, S. Das, S. Nimbalkar, J. Cresko, and E. Masanet, Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components, J. Clean. Prod., 2016, 135, p 1559–1570. https://doi.org/10.1016/j.jclepro.2015.04.10910.1016/j.jclepro.2015.04.109 ↗
8. P.C. Priarone, G. Ingarao, R. di Lorenzo, and L. Settineri, Influence of material-related aspects of additive and subtractive Ti-6Al-4V manufacturing on energy demand and carbon dioxide emissions, J. Ind. Ecol., 2017, 21(S1), p S191–S202. https://doi.org/10.1111/jiec.1252310.1111/jiec.12523 ↗
9. M. Rizwee, D. Kumar, and R. Kumar, (2024). Computational analysis of the mechanical compression of additive manufactured lattice structures: a numerical study. In Advances in Industrial Engineering in the Industry 4.0 Era (pp. 147-156). CRC Press. https://doi.org/10.1201/9781003486244-1210.1201/9781003486244-12 ↗
10. H. Miao, F. Yusof, M.S. Ab Karim, B. Wu, S. Raja, M.Z. Ibrahim, I. Aziz, and D. Chen, Interfacial microstructure, element diffusion, mechanical properties and metallurgical bonding mechanism of 316L-AlSi10Mg multi-material parts fabricated by laser powder bed fusion, J. Mater. Res. Technol., 2023, 26, p 8351–8365. https://doi.org/10.1016/j.jmrt.2023.09.15810.1016/j.jmrt.2023.09.158 ↗
11. M. Rizwee and D. Kumar, Contribution of geometrical infill pattern on mechanical behaviour of 3D manufactured polylactic acid specimen: experimental and numerical analysis, Progr. Rubber, Plast. Recycl. Technol., 2024 https://doi.org/10.1177/1477760624128161410.1177/14777606241281614 ↗
12. F.H. Froes and B. Dutta, The additive manufacturing (AM) of titanium alloys, Adv. Mater. Res., 2014, 1019, p 19–25. https://doi.org/10.4028/www.scientific.net/AMR.1019.1910.4028/www.scientific.net/AMR.1019.19 ↗
13. W. Xu, M. Brandt, S. Sun, J. Elambasseril, Q. Liu, K. Latham, K. Xia, and M. Qian, Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition, Acta Mater., 2015, 85, p 74–84. https://doi.org/10.1016/j.actamat.2014.11.02810.1016/j.actamat.2014.11.028 ↗
14. H. Li, Z.W. Chen, and M. Ramezani, Effect of temperature on sliding wear behavior of Ti-6Al-4V alloy processed by powder bed fusion additive manufacturing techniques, J. Mater. Eng. Perform., 2022, 31(11), p 8940–8954. https://doi.org/10.1007/s11665-022-06959-210.1007/s11665-022-06959-2 ↗
15. L. Parry, I.A. Ashcroft, and R.D. Wildman, Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation, Addit. Manuf., 2016, 12, p 1–15. https://doi.org/10.1016/j.addma.2016.05.01410.1016/j.addma.2016.05.014 ↗
16. Y. Kok, X.P. Tan, P. Wang, M.L.S. Nai, N.H. Loh, E. Liu, and S.B. Tor, Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review, Mater. Des., 2018, 139, p 565–586. https://doi.org/10.1016/j.matdes.2017.11.02110.1016/j.matdes.2017.11.021 ↗
17. M. Rizwee and D. Kumar, Evaluating residual stresses in metal additive manufacturing: a comprehensive review of detection methods, impact, and mitigation strategies, Int.J. Mater. Form., 2024, 17(6), p 53. https://doi.org/10.1007/s12289-024-01855-710.1007/s12289-024-01855-7 ↗
18. T. Vilaro, C. Colin, and J.D. Bartout, As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting, Metall. and Mater. Trans. A., 2011, 42(10), p 3190–3199. https://doi.org/10.1007/s11661-011-0731-y10.1007/s11661-011-0731-y ↗
19. X. Shui, K. Yamanaka, M. Mori, Y. Nagata, K. Kurita, and A. Chiba, Effects of post-processing on cyclic fatigue response of a titanium alloy additively manufactured by electron beam melting, Mater. Sci. Eng. A, 2017, 680, p 239–248. https://doi.org/10.1016/j.msea.2016.10.05910.1016/j.msea.2016.10.059 ↗
20. A. Fatemi, R. Molaei, J. Simsiriwong, N. Sanaei, J. Pegues, B. Torries, N. Phan, and N. Shamsaei, Fatigue behaviour of additive manufactured materials: an overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects, Fatigue Fract. Eng. Mater. Struct., 2019, 42(5), p 991–1009. https://doi.org/10.1111/ffe.1300010.1111/ffe.13000 ↗
21. J. Ding, P. Colegrove, J. Mehnen, S. Ganguly, P.S. Almeida, F. Wang, and S. Williams, Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts, Comput. Mater. Sci., 2011, 50(12), p 3315–3322. https://doi.org/10.1016/j.commatsci.2011.06.02310.1016/j.commatsci.2011.06.023 ↗
22. G.E. Totten, Heat treating of nonferrous alloys, ASM Int. (2016). https://doi.org/10.31399/asm.hb.v04e.978162708169610.31399/asm.hb.v04e.9781627081696 ↗
23. V. Chastand, P. Quaegebeur, W. Maia, and E. Charkaluk, Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM), Mater Charact, 2018, 143, p 76–81. https://doi.org/10.1016/j.matchar.2018.03.02810.1016/j.matchar.2018.03.028 ↗
24. T. Mishurova, S. Cabeza, K. Artzt, J. Haubrich, M. Klaus, C. Genzel, G. Requena, and G. Bruno, An assessment of subsurface residual stress analysis in SLM Ti-6Al-4V, Materials, 2017, 10(4), p 348. https://doi.org/10.3390/ma1004034810.3390/ma10040348 ↗
25. H. Weiwei, J. Wenpeng, L. Haiyan, T. Huiping, K. Xinting, and H. Yu, Research on preheating of titanium alloy powder in electron beam melting technology, Rare Metal Mater. Eng., 2011, 40(12), p 2072–2075. https://doi.org/10.1016/S1875-5372(12)60014-910.1016/S1875-5372(12)60014-9 ↗
26. Y. Zhai, H. Galarraga, and D.A. Lados, Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM, Eng. Fail. Anal., 2016, 69, p 3–14. https://doi.org/10.1016/j.engfailanal.2016.05.03610.1016/j.engfailanal.2016.05.036 ↗
27. N. Hrabe, T. Gnäupel-Herold, and T. Quinn, Fatigue properties of a titanium alloy (Ti-6Al-4V) fabricated via electron beam melting (EBM): effects of internal defects and residual stress, Int. J. Fatigue, 2017, 94, p 202–210. https://doi.org/10.1016/j.ijfatigue.2016.04.02210.1016/j.ijfatigue.2016.04.022 ↗
28. Z.Y. Zhao, L. Li, P.K. Bai, Y. Jin, L.Y. Wu, J. Li, R.G. Guan, and H.Q. Qu, The heat treatment influence on the microstructure and hardness of TC4 titanium alloy manufactured via selective laser melting, Materials, 2018, 11(8), p 1318. https://doi.org/10.3390/ma1108131810.3390/ma11081318 ↗
29. H. Galarraga, R.J. Warren, D.A. Lados, R.R. Dehoff, M.M. Kirka, and P. Nandwana, Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM), Mater. Sci. Eng. A, 2017, 685, p 417–428. https://doi.org/10.1016/j.msea.2017.01.01910.1016/j.msea.2017.01.019 ↗
30. A. Gysler and S. Weissmann, Effect of order in Ti3Al particles and of temperature on the deformation behavior of age-hardened Ti3Al alloys, Mater. Sci. Eng., 1977, 27(2), p 181–193. https://doi.org/10.1016/0025-5416(77)90169-010.1016/0025-5416(77)90169-0 ↗
31. Z. Liang, Z. Sun, W. Zhang, S. Wu, and H. Chang, The effect of heat treatment on microstructure evolution and tensile properties of selective laser melted Ti6Al4V alloy, J. Alloy. Compd., 2019, 782, p 1041–1048. https://doi.org/10.1016/j.jallcom.2018.12.05110.1016/j.jallcom.2018.12.051 ↗
32. E. Sallica-Leva, R. Caram, A.L. Jardini, and J.B. Fogagnolo, Ductility improvement due to martensite α′ decomposition in porous Ti-6Al-4V parts produced by selective laser melting for orthopedic implants, J. Mech. Behav. Biomed. Mater.d. Mater., 2016, 54, p 149–158. https://doi.org/10.1016/j.jmbbm.2015.09.02010.1016/j.jmbbm.2015.09.020 ↗
33. Y. Xu, Y. Lu, K.L. Sundberg, J. Liang, and R.D. Sisson, Effect of annealing treatments on the microstructure, mechanical properties and corrosion behavior of direct metal laser sintered Ti-6Al-4V, J. Mater. Eng. Perform., 2017, 26, p 2572–2582. https://doi.org/10.1007/s11665-017-2710-y10.1007/s11665-017-2710-y ↗
34. B. Vrancken, L. Thijs, J.P. Kruth, and J. Van Humbeeck, Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties, J. Alloy. Compd., 2012, 541, p 177–185. https://doi.org/10.1016/j.jallcom.2012.07.02210.1016/j.jallcom.2012.07.022 ↗
35. P. Wang, F.H. Chen, J. Eckert, S. Pilz, S. Scudino, and K.G. Prashanth, Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment, J. Cent. South Univ., 2021, 28(4), p 1068–1077. https://doi.org/10.1007/s11771-021-4680-310.1007/s11771-021-4680-3 ↗
36. C.L. Li, J.K. Hong, P.L. Narayana, S.W. Choi, S.W. Lee, C.H. Park, J.T. Yeom, and Q. Mei, Realizing superior ductility of selective laser melted Ti-6Al-4V through a multi-step heat treatment, Mater. Sci. Eng. A, 2021, 799, p 140367.10.1016/j.msea.2020.140367 ↗
37. M. Shiomi, K. Osakada, K. Nakamura, T. Yamashita, and F. Abe, Residual stress within metallic model made by selective laser melting process, CIRP Ann. Manuf. Technol., 2004, 53(1), p 195–198. https://doi.org/10.1016/S0007-8506(07)60677-510.1016/S0007-8506(07)60677-5 ↗
38. I. ASTM, ASTM E8/E8M-16a: standard test methods for tension testing of metallic materials. West Conshohocken, PA, USA: ASTM International. (2016)
39. L. Thijs, F. Verhaeghe, T. Craeghs, J. Van Humbeeck, and J.P. Kruth, A study of the microstructural evolution during selective laser melting of Ti-6Al-4V, Acta Mater., 2010, 58(9), p 3303–3312. https://doi.org/10.1016/j.actamat.2010.02.00410.1016/j.actamat.2010.02.004 ↗
40. Z. Zhao, Intracrystalline substructures control and strength-toughness optimization of laser solid formed TC4-DT alloy, Northwestern Polytechnical University, Xi’an, 2018.
41. I.A. Roberts, C.J. Wang, R. Esterlein, M. Stanford, and D.J. Mynors, A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing, Int. J. Mach. Tools Manuf, 2009, 49(12–13), p 916–923. https://doi.org/10.1016/j.ijmachtools.2009.07.00410.1016/j.ijmachtools.2009.07.004 ↗
42. S.A. Etesami, B. Fotovvati, and E. Asadi, Heat treatment of Ti-6Al-4V alloy manufactured by laser-based powder-bed fusion: process, microstructures, and mechanical properties correlations, J. Alloy. Compd., 2022, 895, p 162618. https://doi.org/10.1016/j.jallcom.2021.16261810.1016/j.jallcom.2021.162618 ↗
43. H. Ali, L. Ma, H. Ghadbeigi, and K. Mumtaz, In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V, Mater. Sci. Eng. A, 2017, 695, p 211–220. https://doi.org/10.1016/j.msea.2017.04.03310.1016/j.msea.2017.04.033 ↗
44. Y.S. Zhang, J.J. Hu, Y.Q. Zhao, X.F. Bai, W.T. Huo, W. Zhang, and L.C. Zhang, Microstructure and mechanical properties of a high-oxygen core-shell network structured Ti6Al4V alloy, Vacuum, 2018, 149, p 140–145. https://doi.org/10.1016/j.vacuum.2017.12.03610.1016/j.vacuum.2017.12.036 ↗
45. M. Muhammad, J.W. Pegues, N. Shamsaei, and M. Haghshenas, Effect of heat treatments on microstructure/small-scale properties of additive manufactured Ti-6Al-4V, Int. J. Adv. Manuf. Technol., 2019, 103, p 4161–4172. https://doi.org/10.1007/s00170-019-03789-w10.1007/s00170-019-03789-w ↗
46. N. Jin, Z. Yan, Y. Wang, H. Cheng, and H. Zhang, Effects of heat treatment on microstructure and mechanical properties of selective laser melted Ti-6Al-4V lattice materials, Int. J. Mech. Sci., 2021, 190, p 106042. https://doi.org/10.1016/j.ijmecsci.2020.10604210.1016/j.ijmecsci.2020.106042 ↗
47. S. Sun, D. Zhang, S. Palanisamy, Q. Liu, and M.S. Dargusch, Mechanical properties and deformation mechanisms of martensitic Ti6Al4V alloy processed by laser powder bed fusion and water quenching, Mater. Sci. Eng. A, 2022, 839, p 142817. https://doi.org/10.1016/j.msea.2022.14281710.1016/j.msea.2022.142817 ↗
48. M. Neikter, R. Woracek, T. Maimaitiyili, C. Scheffzük, M. Strobl, M.L. Antti, P. Åkerfeldt, R. Pederson, and C. Bjerkén, Alpha texture variations in additive manufactured Ti-6Al-4V investigated with neutron diffraction, Addit. Manuf., 2018, 23, p 225–234. https://doi.org/10.1016/j.addma.2018.08.01810.1016/j.addma.2018.08.018 ↗
49. S. Leuders, M. Thöne, A. Riemer, T. Niendorf, T. Tröster, H.A. Richard, and H.J. Maier, On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance, Int. J. Fatigue, 2013, 48, p 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.01110.1016/j.ijfatigue.2012.11.011 ↗
50. G.M. Ter Haar and T.H. Becker, Selective laser melting produced Ti-6Al-4V: post-process heat treatments to achieve superior tensile properties, Materials, 2018, 11(1), p 146. https://doi.org/10.3390/ma1101014610.3390/ma11010146 ↗
51. G. Choi, W.S. Choi, J. Han, and P.P. Choi, Additive manufacturing of titanium-base alloys with equiaxed microstructures using powder blends, Addit. Manuf., 2020, 36, p 101467. https://doi.org/10.1016/j.addma.2020.10146710.1016/j.addma.2020.101467 ↗
52. X. Gai, Y. Bai, J. Li, S. Li, W. Hou, Y. Hao, X. Zhang, R. Yang, and R.D. Misra, Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting, Corros. Sci., 2018, 145, p 80–89. https://doi.org/10.1016/j.corsci.2018.09.01010.1016/j.corsci.2018.09.010 ↗
53. S. Pal, T. Bončina, G. Lojen, T. Brajlih, E.Š Fabjan, N. Gubeljak, M. Finšgar, and I. Drstvenšek, Fine martensite and beta-grain variational effects on mechanical properties of Ti-6Al-4V while laser parameters change in laser powder bed fusion, Mater. Sci. Eng. A, 2024, 892, p 146052. https://doi.org/10.1016/j.msea.2023.14605210.1016/j.msea.2023.146052 ↗
54. X. Yan, S. Yin, C. Chen, C. Huang, R. Bolot, R. Lupoi, M. Kuang, W. Ma, C. Coddet, H. Liao, and M. Liu, Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting, J. Alloys Compd., 2018, 764, p 1056–1071. https://doi.org/10.1016/j.jallcom.2018.06.07610.1016/j.jallcom.2018.06.076 ↗
55. G. Kasperovich and J. Hausmann, Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting, J. Mater. Process. Technol., 2015, 220, p 202–214. https://doi.org/10.1016/j.jmatprotec.2015.01.02510.1016/j.jmatprotec.2015.01.025 ↗