DataVXJournal of Materials Engineering and PerformancePaper
journal article·2025-06

Effect of Surface Roughness on the Properties of Ag/Cu Composite Strips

Shannan Zhang, Tao Wang, Fuli Liu, Jiao Yang, Jian Qin, Yafang Cheng

Journal of Materials Engineering and Performance· Volume 34· Issue 11
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Composites

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. C.S. Psomopoulos, D.A. Barkas, S.D. Kaminaris, G.C. Ioannidis, and P. Karagiannopoulos, Recycling Potential for Low Voltage and High Voltage High Rupturing Capacity Fuse Links, Waste Manag., 2017, 70, p 204–211. https://doi.org/10.1016/j.wasman.2017.09.01810.1016/j.wasman.2017.09.018 ↗
2. M.S. Agarwal, A.D. Stokes, and P. Kovitya, Pre-Arcing Behaviour of Open Fuse Wire, J. Phys. D Appl. Phys., 1987, 20(10), p 1237–1242. https://doi.org/10.1088/0022-3727/20/10/00510.1088/0022-3727/20/10/005 ↗
3. Q.K. Zhang, W.M. Long, X.Q. Yu, Y.Y. Pei, and P.X. Qiao, Effects of Ga Addition on Microstructure and Properties of Sn–Ag–Cu/Cu Solder Joints, J. Alloys Compd., 2015, 622, p 973–978.10.1016/j.jallcom.2014.11.030 ↗
4. J.J. Shea, W.R. Crooks, and J.D.B. Smith, Gas Evolving Materials for Improved Low Current Interruption in High Voltage Current Limiting Fuses, IEEE transactions on power delivery, Appl. Magn. Workshop [Proc.], 1995, 10(1), p 258–265. https://doi.org/10.1109/61.36839110.1109/61.368391 ↗
5. Y. Liu, Y. Wang, and J.S. Ma, New Material of Ni-Ti Alloy for Chip Tantalum Capacitor Fuse, Mater. Sci. Forum, 2005, 475–479, p 1767–1770. https://doi.org/10.4028/www.scientific.net/msf.475-479.176710.4028/www.scientific.net/msf.475-479.1767 ↗
6. A. Khalil, E. Ahmed, and P. Naumov, Metal-Coated Thermosalient Crystals as Electrical Fuses, Chem. Commun., 2017, 53(60), p 8470–8473. https://doi.org/10.1039/c7cc04251e10.1039/c7cc04251e ↗
7. E. Murdani, Characterization of Copper and Nichrome Wires for Safety Fuse, J. Phys. Conf. Ser., 2016, 776, p 012099. https://doi.org/10.1088/1742-6596/776/1/01209910.1088/1742-6596/776/1/012099 ↗
8. G. Todorov and K. Kamberov, EV Fuse Design Cost Reduction Based on Thermal-Electric Conduction Analyses, Case Stud. Therm. Eng., 2020, 21, 100692. https://doi.org/10.1016/j.csite.2020.10069210.1016/j.csite.2020.100692 ↗
9. W.M. Long, S.N. Li, D. Du, Q.B. Lu, Y.T. Jiu, and Y. Gao, Morphological Evolution and Development Trend of Brazing Materials, Rare Met. Mater. Eng., 2019, 48(12), p 3781–3790.
10. D. Cho, J.-H. Kim, H.C. Kwon, and K.-H. Kim, Strain Hardening Characteristics of 99.9% Pure Silver at Large Strains, Int J Preics Eng Man., 2021, 22(6), p 1061–1067. https://doi.org/10.1007/s12541-021-00502-410.1007/s12541-021-00502-4 ↗
11. R. Guschlbauer, S. Momeni, F. Osmanlic, and C. Körner, Process Development of 99.95% Pure Copper Processed via Selective Electron Beam Melting and Its Mechanical and Physical Properties, Mater Charact, 2018, 143, p 163–170. https://doi.org/10.1016/j.matchar.2018.04.00910.1016/j.matchar.2018.04.009 ↗
12. F.F. Sui, W.M. Long, S.X. Liu, G.X. Zhang, L. Bao, H. Li, and Y. Chen, Effect of Calcium on the Microstructure and Mechanical Properties of Brazed Joint Using Ag–Cu–Zn Brazing Filler Metal, Mater. Des., 2013, 46, p 605–608.10.1016/j.matdes.2012.11.021 ↗
13. Y. Fang, X. Jiang, D. Mo, D. Zhu, and Z. Luo, A Review on Dissimilar Metals’ Welding Methods and Mechanisms with Interlayer, Int. J. Adv. Manuf. Tech., 2019, 102(9–12), p 2845–2863. https://doi.org/10.1007/s00170-019-03353-610.1007/s00170-019-03353-6 ↗
14. W.M. Long, S.N. Li, Y.X. Shen, L. Du, S.J. Zhong, Q. Wang, and L. Zhang, Overview of the Brazing of Carbon-Carbon Composites, Rare Met. Mater. Eng., 2020, 49(8), p 2683–2690.
15. C. Shi, X. Yang, Y. Ge, J. You, and H. Hou, Lower Limit Law of Welding Windows for Explosive Welding of Dissimilar Metals, J. Iron. Steel Res. Int., 2017, 24(8), p 852–857. https://doi.org/10.1016/s1006-706x(17)30126-710.1016/s1006-706x(17)30126-7 ↗
16. H. Sun, Q. Zhou, J. Zhu, and Y. Peng, Analysis on the Fracture of Al-Cu Dissimilar Materials Friction Stir Welding Lap Joint, J. Mater. Eng. Perform., 2017, 26(12), p 5715–5722. https://doi.org/10.1007/s11665-017-3029-410.1007/s11665-017-3029-4 ↗
17. X.P. Zhang, T.H. Yang, J.Q. Liu, X.F. Luo, and J.T. Wang, Mechanical Properties of an Al/Mg/al Trilaminated Composite Fabricated by Hot Rolling, J. Mater. Sci., 2010, 45(13), p 3457–3464. https://doi.org/10.1007/s10853-010-4373-z10.1007/s10853-010-4373-z ↗
18. W.M. Long, D.S. Liu, X. Dong, and A.P. Wu, Laser Power Effects on Properties of Laser Brazing Diamond Coating, Surf. Eng., 2020, 36(12), p 1315–1326. https://doi.org/10.1080/02670844.2020.175829210.1080/02670844.2020.1758292 ↗
19. G.-F. Zhang, K. Zhang, Y. Guo, and J.-X. Zhang, A Comparative Study of Friction Stir Brazing and Furnace Brazing of Dissimilar Metal al and Cu Plates, Metallogr. Microstruct. Anal., 2014, 3(4), p 272–280. https://doi.org/10.1007/s13632-014-0146-410.1007/s13632-014-0146-4 ↗
20. H. Sun, Q. Zhou, J. Zhu, Y. Peng, and X. Ma, Analysis of the Temperature Field in Al-Cu Dissimilar Materials Friction Stir Welding, J. Mater. Eng. Perform., 2019, 28(5), p 3115–3128. https://doi.org/10.1007/s11665-019-04024-z10.1007/s11665-019-04024-z ↗
21. L. Meng, L. Zhang, S.P. Zhou, and F.T. Yang, Effects of Rolling and Sintering Temperature on Peel Strength of Bonding Interfaces for Ag/Cu Bimetallic Strips, Mater. Sci. Technol., 2003, 19(6), p 779–784. https://doi.org/10.1179/02670830322500278510.1179/026708303225002785 ↗
22. W.M. Long, G.X. Zhang, and Q.K. Zhang, In Situ Synthesis of High Strength Ag Brazing Filler Metals During Induction Brazing Process, Scr. Mater., 2016, 110, p 41–43.10.1016/j.scriptamat.2015.07.041 ↗
23. S. Kundu and G. Thirunavukarasu, Diffusion Welding of Ti6Al4V and 17–4 Stainless Steel Using Cu/Ni Microlayers, J. Mater. Eng. Perform., 2022, 32(2), p 735–751. https://doi.org/10.1007/s11665-022-07101-y10.1007/s11665-022-07101-y ↗
24. E. Akca and A. Gursel, The Effect of Diffusion Welding Parameters on the Mechanical Properties of Titanium Alloy and Aluminum Couples, Metals, 2017, 7(1), p 22. https://doi.org/10.3390/met701002210.3390/met7010022 ↗
25. W.M. Long, Y. Zhao, S.J. Zhong, G.X. Zhang, and S. Huang, Research Progress on Intermetallic Compounds in Copper-Aluminum Brazed Joints, Rare Met. Mater. Eng., 2021, 50(1), p 7–12.
26. C. Carolina, C.T. Lopes, and R.A.A. Ríos, The Effect of Mechanical Polishing and Finishing on the Corrosion Resistance of AISI 304 Stainless Steel, Corros. Eng. Sci. Technol., 2016, 51(6), p 416–428. https://doi.org/10.1080/1478422x.2015.113149310.1080/1478422x.2015.1131493 ↗
27. W.M. Long, D.S. Liu, A.P. Wu, D.C. Wang, and G.Q. Huang, Influence of Laser Scanning Speed on the Formation Property of Laser Brazing Diamond Coating, Diamond Relat. Mater., 2020, 110, 108085.10.1016/j.diamond.2020.108085 ↗
28. X. Yang, F. Wang, W. Wang, S. Liu, Y. Chen, and H. Tang, Comparison of Two-Step Surface Treatment on Surface Roughness and Corrosion Resistance of TC4 Alloy Parts Prepared by SLM and SEBM, J. Alloy. Compd., 2022, 921, p 165929–165929. https://doi.org/10.1016/j.jallcom.2022.16592910.1016/j.jallcom.2022.165929 ↗
29. A. Hirsch and S.P. Lacour, A Method to Form Smooth Films of Liquid Metal Supported by Elastomeric Substrate, Adv. Sci., 2018, 5(10), p 1. https://doi.org/10.1002/advs.20180025610.1002/advs.201800256 ↗
30. R.A. Matula, Electrical Resistivity of Copper, Gold, Palladium, and Silver, J. Phys. Chem. ReF. Data., 1979, 8(4), p 1147–1298. https://doi.org/10.1063/1.55561410.1063/1.555614 ↗
31. P. Walmsley and I.R. Fisher, Determination of the Resistivity Anisotropy of Orthorhombic Materials via Transverse Resistivity Measurements, Rev. Sci. Instrum., 2017, 88(4), p 1. https://doi.org/10.1063/1.497890810.1063/1.4978908 ↗
32. J.S. Galsin, Free-Electron Theory of Metals, Elsevier eBooks, Elsevier BV, 2019, pp. 177–198. https://doi.org/10.1016/b978-0-12-817103-5.00009-8.10.1016/b978-0-12-817103-5.00009-8 ↗
33. G. Reiss, H. Brückl, and J. Vancea, Multilayers: Electrical Properties, Fuchs/Sondheimer Model, Elsevier eBooks Elsevier BV, 2016 https://doi.org/10.1016/b978-0-12-803581-8.02750-810.1016/b978-0-12-803581-8.02750-8 ↗
34. C.-H. Chen, Y.-C. Lin, Y.-T. Shih, S.-C. Chen, C.-H. Tsai, S.-C. Wang, and T.-H. Chuang, Evaluation of Corrosion Resistance of Ag-Alloy Bonding Wires for Electronic Packaging, IEEE Trans. Compon. Packag. Manuf. Technol., 2018, 8(1), p 146–153. https://doi.org/10.1109/tcpmt.2017.276589910.1109/tcpmt.2017.2765899 ↗
35. H. Kijima, Influence of Roll Radius on Roughness Transfer in Skin-Pass Rolling of Steel Strip, J. Mater. Process. Tech., 2014, 214(5), p 1111–1119. https://doi.org/10.1016/j.jmatprotec.2013.12.01910.1016/j.jmatprotec.2013.12.019 ↗