Investigation of Frictional Deformation on Mechanical and Metallurgical Properties of Ni-based Functionally Graded Materials Developed by Wire and Arc Additive Manufacturing
Source abstract
Abstract
The Ni-Cr-Mo-based functionally graded materials (FGMs) are widely used in defense, aerospace, and nuclear applications. In this study, Ni-Cr-Mo-based FGM is developed by using wire and arc additive manufacturing (WAAM) technique. The impact of compositional variations and post-deposition friction stir processing on metallurgical and mechanical properties are investigated. The WAAM-deposited sample exhibited a combination of dendritic and columnar grains, whereas post-deposition processed samples show refined recrystallized grains. The microhardness exhibited a gradual ascent, rising from 147 to 335 HV as moved from the bottom to the top of the samples under both conditions. This increase in microhardness trend can be attributed to the presence of CrNi3 and MoNi4 precipitates, as revealed in x-ray diffraction pattern analysis. The tensile test result also shows a continuous increase in strength from bottom to top of the samples in both, as-deposited and processed one.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced materials and composites · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. A. Sharma, V. Bandari, K. Ito, K. Kohama, M. Ramji, and H.S. BV, A New Process for Design and Manufacture of Tailor-Made Functionally Graded Composites through Friction Stir Additive Manufacturing, J. Manuf. Process., 2017, 26, p 122–130.10.1016/j.jmapro.2017.02.007 ↗
2. Y. Shabana and N. Noda, Thermo-Elasto-Plastic Stresses in Functionally Graded Materials Subjected to Thermal Loading Taking Residual Stresses of the Fabrication Process into Consideration, Compos. B Eng., 2001, 32(2), p 111–121.10.1016/S1359-8368(00)00049-4 ↗
3. D. Tishkevich, A. Vorobjova, D. Shimanovich, D. Vinnik, T. Zubar, A. Kozlovskiy, M. Zdorovets, D. Yakimchuk, S. Trukhanov, and A. Trukhanov, Formation and Corrosion Properties of Ni-based Composite Material in the Anodic Alumina Porous Matrix, J. Alloys Compd., 2019, 804, p 139–146.10.1016/j.jallcom.2019.07.001 ↗
4. A. Katz-Demyanetz, V.V. Popov Jr., A. Kovalevsky, D. Safranchik, and A. Koptioug, Powder-Bed Additive Manufacturing for Aerospace Application: Techniques, Metallic and Metal/Ceramic Composite Materials and Trends, Manuf. Rev., 2019, 6, p 5.
5. S. Wang, Fracture Mechanics for Delamination Problems in Composite Materials, J. Compos. Mater., 1983, 17(3), p 210–223.10.1177/002199838301700302 ↗
6. B.S. Shariat, Q. Meng, A.S. Mahmud, Z. Wu, R. Bakhtiari, J. Zhang, F. Motazedian, H. Yang, G. Rio, and T.-H. Nam, Functionally Graded Shape Memory Alloys: Design, Fabrication and Experimental Evaluation, Mater. Des., 2017, 124, p 225–237.10.1016/j.matdes.2017.03.069 ↗
7. P. Kumar, S.K. Sharma, and R.K.R. Singh, Recent Trends and Future Outlooks in Manufacturing Methods and Applications of FGM: A Comprehensive Review, Mater. Manuf. Process., 2022, 38, p 1–35.
8. S. Islak, D. Kır, E. Çelik, and H. Çelik, Effect of Boron Carbide on the Microstructure and the Mechanical Properties of Segments Produced using Hot Pressing Method, 2012.
9. H. Qu, P. Li, S. Zhang, A. Li, and H. Wang, Microstructure and Mechanical Property of Laser Melting Deposition (LMD) Ti/TiAl Structural Gradient Material, Mater. Des., 2010, 31(1), p 574–582.10.1016/j.matdes.2009.07.004 ↗
10. J. Parthasarathy, B. Starly, and S. Raman, A Design for the Additive Manufacture of Functionally Graded Porous Structures with Tailored Mechanical Properties for Biomedical Applications, J. Manuf. Process., 2011, 13(2), p 160–170.10.1016/j.jmapro.2011.01.004 ↗
11. B. Chen, Y. Su, Z. Xie, C. Tan, and J. Feng, Development and Characterization of 316L/Inconel625 Functionally Graded Material Fabricated by Laser Direct Metal Deposition, Opt. Laser Technol., 2020, 123, p 105916.10.1016/j.optlastec.2019.105916 ↗
12. V. Dhinakaran, J. Ajith, A.F.Y. Fahmidha, T. Jagadeesha, T. Sathish, and B. Stalin, Wire Arc Additive Manufacturing (WAAM) Process of Nickel based Superalloys—A Review, Mater. Today: Proc., 2020, 21, p 920–925.
13. M. Das, P.K. Sen, G. Sahu, R. Sharma, and S. Bohidar, Review on High Performance Nickel based Super Alloy, Int. J. Eng. Manag. Res. (IJEMR), 2015, 5(5), p 286–291.
14. J. Prado-Cerqueira, J. Diéguez, and A. Camacho, Preliminary Development of a Wire and Arc Additive Manufacturing System (WAAM), Procedia Manuf., 2017, 13, p 895–902.10.1016/j.promfg.2017.09.154 ↗
15. T.D. Ngo, A. Kashani, G. Imbalzano, K.T. Nguyen, and D. Hui, Additive Manufacturing (3D printing): A Review of Materials, Methods, Applications and Challenges, Compos. B Eng., 2018, 143, p 172–196.10.1016/j.compositesb.2018.02.012 ↗
16. E. Karaköse and M. Keskin, Effect of Microstructural Evolution and Elevated Temperature on the Mechanical Properties of Ni–Cr–Mo Alloys, J. Alloys Compd., 2015, 619, p 82–90.10.1016/j.jallcom.2014.09.036 ↗
17. J. Wang, Z. Pan, Y. Ma, Y. Lu, C. Shen, D. Cuiuri, and H. Li, Characterization of Wire Arc Additively Manufactured Titanium Aluminide Functionally Graded Material: Microstructure, Mechanical Properties and Oxidation Behaviour, Mater. Sci. Eng. A, 2018, 734, p 110–119.10.1016/j.msea.2018.07.097 ↗
18. P.E. Turchi, L. Kaufman, and Z.-K. Liu, Modeling of Ni–Cr–Mo based Alloys: Part I—Phase Stability, Calphad, 2006, 30(1), p 70–87.10.1016/j.calphad.2005.10.003 ↗
19. B. Baufeld, E. Brandl, and O. Van der Biest, Wire based Additive Layer Manufacturing: Comparison of Microstructure and Mechanical Properties of Ti–6Al–4V Components Fabricated by Laser-Beam Deposition and Shaped Metal Deposition, J. Mater. Process. Technol., 2011, 211(6), p 1146–1158.10.1016/j.jmatprotec.2011.01.018 ↗
20. C. Cunningham, J. Flynn, A. Shokrani, V. Dhokia, and S. Newman, Invited Review Article: Strategies and Processes for High Quality Wire Arc Additive Manufacturing, Addit. Manuf., 2018, 22, p 672–686.
21. H. Gao, R. Dutta, R. Huizenga, M. Amirthalingam, M. Hermans, T. Buslaps, and I. Richardson, Stress Relaxation Due to Ultrasonic Impact Treatment on Multi-pass Welds, Sci. Technol. Weld. Join., 2014, 19(6), p 505–513.10.1179/1362171814Y.0000000219 ↗
22. D. Richards, P. Prangnell, S. Williams, and P. Withers, Global Mechanical Tensioning for the Management of Residual Stresses in Welds, Mater. Sci. Eng. A, 2008, 489(1–2), p 351–362.10.1016/j.msea.2007.12.042 ↗
23. R.S. Mishra and Z. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. R. Rep., 2005, 50(1–2), p 1–78.10.1016/j.mser.2005.07.001 ↗
24. C. Rhodes, M. Mahoney, W. Bingel, R. Spurling, and C. Bampton, Effects of Friction Stir Welding on Microstructure of 7075 Aluminum, Scr. Mater., 1997, 36(1), p 69–75.10.1016/S1359-6462(96)00344-2 ↗
25. P. Kumar, R.K.R. Singh, and S.K. Sharma, Effect of welding parameters on bead characteristics and mechanical properties of wire and arc additive manufactured Inconel 718, Proc. Inst. Mech. Eng. Part C: J. Mech. Eng. Sci., 2022, 237, p 09544062221133035.
26. W. Yangfan, C. Xizhang, and S. Chuanchu, Microstructure and Mechanical Properties of Inconel 625 Fabricated by Wire-Arc Additive Manufacturing, Surf. Coat. Technol., 2019, 374, p 116–123.10.1016/j.surfcoat.2019.05.079 ↗