Shape Memory Behavior and Tribological Analysis of Heat-Treated NiTiFe Alloy
Source abstract
Abstract
The objective of this work is to study the effects of Fe additions on the phase evolution, microstructure, and mechanical properties of heat-treated Ni(50-X)Ti50FeX shape memory alloys. The NiTiFe specimens were prepared by mechanical alloying, compaction, sintering, and heat treatment processes. The microstructural and phase analysis of the sample shows the NiTiFe phase along with Ti-rich and Ni-rich phases. Better mechanical properties were observed in 4 at.% Fe samples owing to the presence of secondary intermetallic phases such as Ti2Ni, Ni3Ti, Fe3Ti, and Ni4Ti3 compared to other samples. The 10 at.% Fe samples containing a higher percentage of NiTi(B19’) and FeTi phases showed better shape memory behavior while showing a higher coefficient of friction as compared to other samples. Wear tests were done to determine the wear mechanisms prevalent during the tests. It was found that the adhesive and the abrasive wear were the most common mechanisms that contributed to the wear behavior of the sample.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. K. Otsuka and X. Ren, Physical Metallurgy of Ti-Ni-based Shape Memory Alloys, Prog. Mater. Sci., 2005, 50(5), p 511–678.10.1016/j.pmatsci.2004.10.001 ↗
2. S. Jiang, Y. Zhang, Y. Zhao, M. Tang, and W. Yi, Constitutive Behavior of Ni-Ti Shape Memory Alloy Under Hot Compression, J. Cent. South Univ., 2013, 20(1), p 24–29.10.1007/s11771-013-1454-6 ↗
3. H. Yin and Q. Sun, Temperature Variation in NiTi Shape Memory Alloy During Cyclic Phase Transition, J. Mater. Eng. Perform., 2012, 21(12), p 2505–2508.10.1007/s11665-012-0395-9 ↗
4. D. Vojtěch, M. Voděrová, J. Fojt, P. Novák, and T. Kubásek, Surface Structure and Corrosion Resistance of Short-Time Heat-Treated NiTi Shape Memory Alloy, Appl. Surf. Sci., 2010, 257(5), p 1573–1582.10.1016/j.apsusc.2010.08.097 ↗
5. X. Yin, X. Mi, Y. Li, and B. Gao, Microstructure and Properties of Deformation Processed Polycrystalline Ni47Ti44Nb9 Shape Memory Alloy, J. Mater. Eng. Perform., 2012, 21(12), p 2684–2690.10.1007/s11665-012-0376-z ↗
6. L. Stirling, Applicability of Shape Memory Alloy Wire for an Active, Soft Orthotic, J. Mater. Eng. Perform., 2011, 20(4–5), p 658–662.10.1007/s11665-011-9858-7 ↗
7. J. Van Humbeeck, Non-Medical Applications of Shape Memory Alloys, Mater. Sci. Eng. A, 1999, 273–275, p 134–148.10.1016/S0921-5093(99)00293-2 ↗
8. L.M. Schetky, Shape Memory Alloy Applications in Space Systems, Mater. Des., 1991, 12(1), p 29–32.10.1016/0261-3069(91)90089-M ↗
9. H. Jiang, Y. Chen, D. Yang, H. Sun, J. Zeng, and L. Rong, Effect of Mo Addition on the Microstructure and Properties of TiNiNb Alloy, Acta Metall. Sin. Eng. Lett., 2014, 27(2), p 217–222.10.1007/s40195-014-0039-1 ↗
10. H.Z. Lu, H.W. Ma, W.S. Cai, X. Luo, Z. Wang, C.H. Song, S. Yin, and C. Yang, Stable Tensile Recovery Strain Induced by a Ni4Ti3 Nanoprecipitate in a Ni50.4Ti49.6 Shape Memory Alloy Fabricated Via Selective Laser Melting, Acta Mater., 2021, 219, p 117261.10.1016/j.actamat.2021.117261 ↗
11. H.Z. Lu, L.H. Liu, C. Yang, C.H. Song, and Z. Wang, Simultaneous Enhancement of Mechanical and Shape Memory Properties by Heat-Treatment Homogenization of Ti2Ni Precipitates in TiNi Shape Memory Alloy Fabricated by Selective Laser Melting, J. Mater. Sci. Technol., 2022, 101, p 205–216.10.1016/j.jmst.2021.06.019 ↗
12. H.Z. Lu, T. Chen, L.H. Liu, H. Wang, X. Luo, C.H. Song, Z. Wang, and C. Yang, Constructing Function Domains in NiTi Shape Memory Alloys by Additive Manufacturing, Virtual Phys. Prototyp., 2022, 17(3), p 563–581.10.1080/17452759.2022.2053821 ↗
13. A. Churakova, D. Gunderov, A. Lukyanov, and N. Nollmann, Transformation of the TiNi Alloy Microstructure and the Mechanical Properties Caused by Repeated B2–B19′ Martensitic Transformations, Acta Metall. Sin. Eng. Lett., 2015, 28(10), p 1230–1237.10.1007/s40195-015-0317-6 ↗
14. K.C. Atli, I. Karaman, R.D. Noebe, and D. Gaydosh, The Effect of Training on Two-Way Shape Memory Effect of Binary NiTi and NiTi Based Ternary High Temperature Shape Memory Alloys, Mater. Sci. Eng. A, 2013, 560, p 653–666.10.1016/j.msea.2012.10.009 ↗
15. S.K. Wu, H.C. Lin, and T.Y. Lin, Electrical Resistivity of Ti-Ni Binary and Ti-Ni-X (X=Fe, Cu) Ternary Shape Memory Alloys, Mater. Sci. Eng. A, 2006, 438–440, p 536–539.10.1016/j.msea.2005.12.059 ↗
16. Y.X. Tong, Microstructure and Martensitic Transformation of an Ultrafine-Grained TiNiNb Shape Memory Alloy Processed by Equal Channel Angular Pressing, Intermetallics, 2014, 49, p 81–86.10.1016/j.intermet.2014.01.019 ↗
17. X. He, L. Zhao, S. Duo, R. Zhang, and L. Rong, Stress-Induced Martensitic Transformation in (Ni47Ti44)100-xNbx Shape Memory Alloys with Wide Hysteresis, Trans. Nonferrous Met. Soc. China, 2006, 16, p s42–s46.10.1016/S1003-6326(06)60139-8 ↗
18. A. Etaati and K. Dehghani, A Study on Hot Deformation Behavior of Ni-425 Ti-75 Cu Alloy, Mater. Chem. Phys., 2013, 140(1), p 208–215.10.1016/j.matchemphys.2013.03.022 ↗
19. A. Nespoli, E. Villa, and S. Besseghini, Characterization of the Martensitic Transformation in Ni50-xTi50Cux Alloys Through Pure Thermal Measurements, J. Alloys Compd., 2011, 509(3), p 644–647.10.1016/j.jallcom.2010.09.145 ↗
20. R. Santamarta, TEM Study of Structural and Microstructural Characteristics of a Precipitate Phase in Ni-rich Ni-Ti-Hf and Ni-Ti-Zr Shape Memory Alloys, Acta Mater., 2013, 61(16), p p6191-6206.10.1016/j.actamat.2013.06.057 ↗
21. L. Kovarik, Structural Analysis of a New Precipitate Phase In High-Temperature TiNiPt Shape Memory Alloys, Acta Mater., 2010, 58(14), p 4660–4673.10.1016/j.actamat.2010.04.039 ↗
22. K.C. Atli, I. Karaman, R.D. Noebe, and H.J. Maier, Comparative Analysis of the Effects of Severe Plastic Deformation and Thermomechanical Training on the Functional Stability of Ti50.5Ni24.5Pd25 High-Temperature Shape Memory Alloy, Scr. Mater., 2011, 64(4), p 315–318.10.1016/j.scriptamat.2010.10.022 ↗
23. B. Kockar, I. Karaman, J.I. Kim, and Y. Chumlyakov, A Method to Enhance Cyclic Reversibility of NiTiHf High Temperature Shape Memory Alloys, Scr. Mater., 2006, 54(12), p 2203–2208.10.1016/j.scriptamat.2006.02.029 ↗
24. Y.-N. Zhao, S.-Y. Jiang, Y.-Q. Zhang, and Y.-L. Liang, Influence of Fe Addition on Phase Transformation, Microstructure and Mechanical Property of Equiatomic NiTi Shape Memory Alloy, Acta Metall. Sin. Eng. Lett., 2017, 30(8), p 762–770.10.1007/s40195-017-0584-5 ↗
25. M. Matsuda, R. Yamashita, S. Tsurekawa, K. Takashima, M. Mitsuhara, and M. Nishida, Antiphase Boundary-Like Structure of B19′ Martensite via R-Phase Transformation in Ti-Ni-Fe alloy, J. Alloys Compd., 2014, 586, p 87–93.10.1016/j.jallcom.2013.10.015 ↗
26. Y. Murakami and D. Shindo, Changes in Microstructure Near the R-Phase Transformation in Ti 50 Ni 48 Fe 2 Studied By In-Situ Electron Microscopy, Philos. Mag. Lett., 2001, 81(9), p 631–638.10.1080/09500830110063950 ↗
27. H. Xu, C. Jiang, S. Gong, and G. Feng, Martensitic Transformation of the Ti50Ni48Fe2 Alloy Deformed at Different Temperatures, Mater. Sci. Eng. A, 2000, 281(1–2), p 234–238.10.1016/S0921-5093(99)00722-4 ↗
28. J. Parida, S.C. Mishra, and A. Behera, Effect of Fe Addition on Phase Evolution, Microstructure and Properties of Ti50Ni50-XFeX Alloy, Mater. Sci. Technol., (2023), pp.1-16.
29. Shape Memory Alloy Research Team (Smart), 2001, http://smart.tamu.edu
30. L. Yan, Y. Liu, and E. Liu, Wear Behaviour of Martensitic NiTi Shape Memory Alloy Under Ball-on-Disk Sliding Tests, Tribol. Int., 2013, 66, p 219–224.10.1016/j.triboint.2013.05.012 ↗
31. B. Briscoe, Tribology—Friction and Wear of Engineering Materials, Tribol. Int., 1992, 25(5), p 357.10.1016/0301-679X(92)90040-T ↗
32. G. Straffelini, Materials for Tribology, Springer Tracts, Mech. Eng., 2015, 11, p 159–199.
33. M. Abedini, H.M. Ghasemi and M. Nili Ahmadabadi, Tribological Behavior of NiTi Alloy in Martensitic and Austenitic States, Mater. Des., 2009, 30(10), p 4493–4497.10.1016/j.matdes.2009.05.031 ↗
34. J.H. Zhu, C.T. Liu, and C.H. Chen, Effect of Iron Additions on Environmental Embrittlement of NiTi-Base Alloys, Intermetallics, 2004, 12(7–9), p 859–868.10.1016/j.intermet.2004.02.037 ↗
35. A.S. Ferreira, P.R. Rovani, J.C. de Lima, and A.S. Pereira, High-Pressure Study of Ti50Ni25Fe25 Powder Produced by Mechanical Alloying, J. Appl. Phys., 2015, 7, p 117.
36. J. Singh and A.T. Alpas, Dry Sliding Wear Mechanisms in a Ti50Ni47Fe3 Intermetallic Alloy, Wear, 1995, 181, p 302–311.10.1016/0043-1648(95)90037-3 ↗
37. W. Ma, B. Chen, F.S. Liu, and Q. Xu, Phase Transformation Behaviors and Mechanical Properties of Ti50Ni49Fe1 Alloy with Severe Plastic Deformation, Rare Met., 2013, 32, p 448–452.10.1007/s12598-013-0157-3 ↗
38. X. Li, Y. Ruan, and B. Wei, Structural Evolution and Micromechanical Properties of Ternary Ni-Fe-Ti Alloy Solidified Under Microgravity Condition, Metall. Mater. Trans. A, 2020, 51, p 3461–3472.10.1007/s11661-020-05792-3 ↗
39. Y.N. Zhao, S.Y. Jiang, Y.Q. Zhang, and Y.L. Liang, Influence of Fe Addition on Phase Transformation, Microstructure and Mechanical Property of Equiatomic NiTi Shape Memory Alloy, Acta Metall. Sin. Eng. Lett., 2017, 30, p 762–770.10.1007/s40195-017-0584-5 ↗
40. J. Parida, S.C. Mishra, B.C. Marupalli, and A. Behera, Fabrication of Nickel-Titanium-Iron Shape Memory Alloys by Powder Metallurgy Route and Analyses of Their Physical and Mechanical Behaviour, Powder Metallurgy, pp. 1-14 (2023)10.1080/00325899.2023.2235143 ↗
41. J. Parida, S.C. Mishra, and A. Behera, Synthesis and Characterization of Ti50Ni(50−X)FeX Alloy Produced by Mechanical Alloying and Pressure-Less Sintering, Met. Mater. Int., 2023, 29(4), p 1145–1164.10.1007/s12540-022-01277-7 ↗
42. J. Parida, S.C. Mishra, and A. Behera, Microstructure and Mechanical Properties of Ti50Ni(50-X)FeX Alloys Fabricated by Powder Metallurgy Process, Metall. Mater. Trans. A, 2023, 54(7), p 2585–2604.10.1007/s11661-023-07037-5 ↗
43. C. Velmurugan and V. Senthilkumar, Optimization of Spark Plasma Sintering Parameters for NiTiCu Shape Memory Alloys, Mater. Manuf. Process., 2019, 34(4), p 369–378.10.1080/10426914.2018.1512118 ↗
44. T.S. Huang, S.F. Ou, C.H. Kuo, and C.H. Yang, Effects of Thermomechanical Treatment on Phase Transformation of the Ti50Ni49W1 Shape Memory Alloy, Metals Basel., 2020, 10(4), p 527.10.3390/met10040527 ↗
45. P. Liu, Q. Kan, and H. Yin, Effect of Grain Size on Wear Resistance of Nanocrystalline NiTi Shape Memory Alloy, Mater. Lett., 2019, 241, p 43–46.10.1016/j.matlet.2019.01.025 ↗
46. W.C. Oliver and G.M. Pharr, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 1992, 7(6), p 1564–1583.10.1557/JMR.1992.1564 ↗
47. M. Fellah, M.A. Samad, M. Labaiz, O. Assala, and A. Iost, Sliding Friction and Wear Performance of the Nano-Bioceramic α-Al2O3 Prepared by High Energy Milling, Tribol. Int., 2015, 91, p 151–159.10.1016/j.triboint.2015.07.006 ↗
48. J. Peña, E. Solano, A. Mendoza, J. Casals, J.A. Planell, and F.J. Gil, Effect of the Ms Transformation Temperature on the Wear Behaviour of NiTi Shape Memory Alloys for Articular Prosthesis, Biomed. Mater. Eng., 2005, 15(4), p 289–293.
49. M.A. Godinez-Madera, O. Jimenez, E. Rodríguez, M.A. González, F. Alvarado-Hernández, M. Flores, D. Bravo-Barcenas and J. Chávez, Nanoindentation and Tribological Properties of Ni51Ti49−xTax (x < 5 at. %) Alloys Fabricated by Arc Melting, Mater. Lett., 2021, 284, p 129010.10.1016/j.matlet.2020.129010 ↗
50. G. Ghosh, Iron-Nickel-Titanium.
51. J. De Keyzer, G. Cacciamani, N. Dupin, and P. Wollants, Thermodynamic Modeling and Optimization of the Fe-Ni-Ti System, Calphad Comput. Coupling Phase Diagr. Thermochem., 2009, 33(1), p 109–123.10.1016/j.calphad.2008.10.003 ↗
52. S. Wu, Wear Mechanism and Tribological Characteristics of Porous NiTi Shape Memory Alloy for Bone Scaffold, J. Biomed. Mater. Res. Part A, 2013, 101A(9), p 2586–2601.10.1002/jbm.a.34568 ↗
53. M. Farvizi, Effect of Starting Materials on the Wear Performance of NiTi-Based Composites, Wear, 2015, 334–335, p 35–43.10.1016/j.wear.2015.04.011 ↗
54. F. Gao and H.M. Wang, Dry Sliding Wear Property of a Laser Melting/Deposited Ti2Ni/TiNi Intermetallic Alloy, Intermetallics, 2008, 16(2), p 202–208.10.1016/j.intermet.2007.09.008 ↗
55. B. Liu, Z. Liu, X. Liu, W. Wang, and L. Wang, Effect of Sintering Temperature on the Microstructure and Mechanical Properties of Ti50Ni50 and Ti47Ni47Al6 Intermetallic Alloys, J. Alloys Compd., 2013, 578, p 373–379.10.1016/j.jallcom.2013.05.164 ↗
56. N. Zhou, C. Shen, M.F.X. Wagner, G. Eggeler, M.J. Mills, and Y. Wang, Effect of Ni4Ti3 Precipitation on Martensitic Transformation in Ti-Ni, Acta Mater., 2010, 58(20), p 6685–6694.10.1016/j.actamat.2010.08.033 ↗