DataVXJournal of Materials Engineering and PerformancePaper
journal article·2022-07

Binder Jetting of Hydroxyapatite/Carboxymethyl Chitosan/Polyvinylpyrrolidone/Dextrin Composite: The Role of Polymeric Adhesive and Particle Size Distribution on Printability of Powders

Fahimeh Dini, Seyed Amir Ghaffari, Jafar Javadpour, Hamid Reza Rezaie

Journal of Materials Engineering and Performance· Volume 31· Issue 7
Publisher page
Source abstract

Abstract

Low-temperature binder jetting is an encouraging approach to print hydroxyapatite composite. In this method, many design parameters such as binder and powder properties must be optimized to obtain appropriate mechanical properties. For binder jetting of 3D printable hydroxyapatite powder, a water-based solvent and water-soluble polymeric adhesives were used in this study. For this purpose, hydroxyapatite, carboxymethyl chitosan, polyvinylpyrrolidone, and dextrin were blended by different combinations and routes. Powder characterization and assessment of compressive strength were performed to identify the optimal powder composition. Results show that using a mixture of hydroxyapatite and biocompatible polymers with optimized flowability and packing density via Dinger-Funk equation resulted in the preparation of 3D printable powder. Post-treatment of printed parts in chitosan solution increased the compressive strength and Young’s modulus.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

PolymersBiomaterialsCompositesMaterials processing

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. L. Pighinelli and M. Kucharska, Chitosan-Hydroxyapatite Composites, Carbohydr. Polym., 2013, 93, p 256-262. https://doi.org/10.1016/j.carbpol.2012.06.00410.1016/j.carbpol.2012.06.004 ↗
2. Z. Chen, Z. Li, J. Li, C. Liu, C. Lao, Y. Fu, C. Liu, Y. Li, P. Wang and Y. He, 3D Printing of Ceramics: A Review, J. Eur. Ceram. Soc., 2019, 39, p 661-687. https://doi.org/10.1016/j.jeurceramsoc.2018.11.01310.1016/j.jeurceramsoc.2018.11.013 ↗
3. X. Lv, F. Ye, L. Cheng, S. Fan and Y. Liu, Binder Jetting of Ceramics: Powders, Binders, Printing Parameters, Equipment, and Post-treatment, Ceram. Int., 2019, 45, p 12609-12624. https://doi.org/10.1016/j.ceramint.2019.04.01210.1016/j.ceramint.2019.04.012 ↗
4. W. Chai, Q. Wei, M. Yang, K. Ji and Y. Guo, The Printability of Three Water Based Polymeric Binders and Their Effects on the Properties of 3D Printed Hydroxyapatite Bone Scaffold, Ceram. Int., 2019, 46, p 6663-6671. https://doi.org/10.1016/j.ceramint.2019.11.15410.1016/j.ceramint.2019.11.154 ↗
5. J.A. Inzana, D. Olvera, S.M. Fuller, J.P. Kelly, O.A. Graeve, E.M. Schwarz, S.L. Kates and H.A. Awad, 3D Printing of Composite Calcium Phosphate and Collagen Scaffolds for Bone Regeneration, Biomaterials, 2014, 35, p 4026-4034. https://doi.org/10.1016/j.biomaterials.2014.01.06410.1016/j.biomaterials.2014.01.064 ↗
6. C.A. Díaz-moreno, Y. Lin, D. Espalin, R.B. Wicker, C.A. Terrazas and L.E. Murr, Binder Jetting Additive Manufacturing of Aluminum Nitride Components, Ceram. Int., 2019, 45, p 13620-13627. https://doi.org/10.1016/j.ceramint.2019.03.18710.1016/j.ceramint.2019.03.187 ↗
7. M. Hotta, A. Shimamura, N. Kondo and T. Ohji, Powder Layer manufacturing of Alumina Ceramics Using Water Spray Bonding, J. Ceram. Soc. Japan., 2016, 124, p 750-752. https://doi.org/10.2109/jcersj2.1604110.2109/jcersj2.16041 ↗
8. H. Miyanaji, S. Zhang and L. Yang, A New Physics-Based Model for Equilibrium Saturation Determination in Binder Jetting Additive Manufacturing Process, Int. J. Mach. Tools Manuf., 2017, 124, p 1-11.10.1016/j.ijmachtools.2017.09.001 ↗
9. G. Miao, W. Du, M. Moghadasi, Z. Pei and C. Ma, Ceramic Binder Jetting Additive Manufacturing: Effects of Granulation on Properties of Feedstock Powder and Printed and Sintered Parts, Addit. Manuf., 2020, 36, 101542. https://doi.org/10.1016/j.addma.2020.10154210.1016/j.addma.2020.101542 ↗
10. R. Vasireddi and B. Basu, Conceptual Design of Three-Dimensional Scaffolds of Powder-Based Materials for Bone Tissue Engineering Applications, Rapid Prototyp. J., 2015, 21, p 716-724. https://doi.org/10.1108/RPJ-12-2013-012310.1108/RPJ-12-2013-0123 ↗
11. G. Brunello, S. Sivolella, R. Meneghello, L. Ferroni, C. Gardin, A. Piattelli, B. Zavan and E. Bressan, Powder-Based 3D Printing for Bone Tissue Engineering, Biotechnol. Adv., 2016, 34, p 740-753. https://doi.org/10.1016/j.biotechadv.2016.03.00910.1016/j.biotechadv.2016.03.009 ↗
12. W. Du, X. Ren, C. Ma and Z. Pei, Binder Jetting Additive Manufacturing of Ceramics: A Literature Review, Int. Mech. Eng. Congr. Expo., 2018 https://doi.org/10.1115/imece2017-7034410.1115/imece2017-70344 ↗
13. Z. Fu, L. Schlier, N. Travitzky and P. Greil, Three-Dimensional Printing of SiSiC Lattice Truss Structures, Mater. Sci. Eng. A., 2013, 560, p 851-856. https://doi.org/10.1016/j.msea.2012.09.10710.1016/j.msea.2012.09.107 ↗
14. X. Yin, N. Travitzky and P. Greil, Near-Net-Shape Fabrication of Ti 3 AlC 2 -Based Composites, Int. J. Appl. Ceram. Technol., 2007, 190, p 184-190.10.1111/j.1744-7402.2007.02123.x ↗
15. B. Nan, X. Yin, L. Zhang and L. Cheng, Three-Dimensional Printing of Ti3SiC2 -Based Ceramics, J. Am. Ceram. Soc., 2011, 94, p 969-972. https://doi.org/10.1111/j.1551-2916.2010.04257.x10.1111/j.1551-2916.2010.04257.x ↗
16. R. Melcher, N. Travitzky, C. Zollfrank and P. Greil, 3D Printing of Al2O3/Cu-O Interpenetrating Phase Composite, J. Mater. Sci., 2011, 46, p 1203-1210. https://doi.org/10.1007/s10853-010-4896-310.1007/s10853-010-4896-3 ↗
17. A. Winkel, R. Meszaros, S. Reinsch, R. Mu, N. Travitzky, T. Fey, P. Greil and L. Wondraczek, Sintering of 3D-Printed Glass/HAp Composites, J. Am. Ceram. Soc., 2012, 95, p 3387-3393. https://doi.org/10.1111/j.1551-2916.2012.05368.x10.1111/j.1551-2916.2012.05368.x ↗
18. P.G.R. Melcher, S. Martins and N. Travitzky, Fabrication of Al2O3-Based Composites by Indirect 3D-Printing, Mater. Lett., 2006, 60, p 572-575. https://doi.org/10.1016/j.matlet.2005.09.05910.1016/j.matlet.2005.09.059 ↗
19. J. Suwanprateeb, R. Sanngam and T. Panyathanmaporn, Influence of Raw Powder Preparation Routes on Properties of Hydroxyapatite Fabricated by 3D Printing Technique, Mater. Sci. Eng. C., 2010, 30, p 610-617. https://doi.org/10.1016/j.msec.2010.02.01410.1016/j.msec.2010.02.014 ↗
20. J. Suwanprateeb, R. Sanngam and W. Suwanpreuk, Fabrication of Bioactive Hydroxyapatite / Bis-GMA Based Composite Via Three Dimensional Printing, J. Mater. Sci. Mater. Med., 2008, 19, p 2637-2645. https://doi.org/10.1007/s10856-007-3362-510.1007/s10856-007-3362-5 ↗
21. H. Zhang, X. Mao, Z. Du, W. Jiang and X. Han, Three Dimensional Printed Macroporous Polylactic Acid / Hydroxyapatite Composite Scaffolds for Promoting Bone Formation in a Critical-Size Rat Calvarial Defect Model, Sci. Technol. Adv. Mater., 2016, 17, p 136-148. https://doi.org/10.1080/14686996.2016.114553210.1080/14686996.2016.1145532 ↗
22. Y. Wang, X. Li, C. Li and M. Yang, Binder Droplet Impact Mechanism on a Hydroxyapatite Microsphere Surface in 3D Printing of Bone Scaffolds, J. Mater. Sci., 2015, 50, p 5014-5023. https://doi.org/10.1007/s10853-015-9050-910.1007/s10853-015-9050-9 ↗
23. S.C. Cox, J.A. Thornby, G.J. Gibbons, M.A. Williams and K.K. Mallick, 3D Printing of Porous Hydroxyapatite Scaffolds Intended for Use in Bone Tissue Engineering Applications, Mater. Sci. Eng. C., 2015, 47, p 237-247. https://doi.org/10.1016/j.msec.2014.11.02410.1016/j.msec.2014.11.024 ↗
24. J. Suwanprateeb, F. Thammarakcharoen and K. Wasoontararat, Influence of Printing Parameters on the Transformation Efficiency of 3D-Printed Plaster of Paris to Hydroxyapatite and Its Properties, Rapid Prototyp. J., 2012, 18, p 490-499. https://doi.org/10.1108/1355254121127203610.1108/13552541211272036 ↗
25. J. Suwanprateeb, F. Thammarakcharoen and N. Hobang, Enhancement of Mechanical Properties of 3D Printed Hydroxyapatite by Combined Low and High Molecular Weight Polycaprolactone Sequential Infiltration, J. Mater. Sci. Mater. Med., 2016, 27, p 171. https://doi.org/10.1007/s10856-016-5784-410.1007/s10856-016-5784-4 ↗
26. X. Li, Y. Yuan, L. Liu, Y. Shan, L. Yiyu, C. Yuxing, Y. Chai and Y. Chen, 3D Printing of Hydroxyapatite/Tricalcium Phosphate Scaffold with Hierarchical Porous Structure for Bone Regeneration, Bio-Design Manuf., 2019, 3, p 15-29. https://doi.org/10.1007/s42242-019-00056-510.1007/s42242-019-00056-5 ↗
27. A. Kumar, K.C. Nune and R.D.K. Misra, Biological Functionality of Extracellular Matrix-Ornamented Three-Dimensional Printed Hydroxyapatite Scaffolds, J. Biomed. Mater. Res. Part A., 2016, 104, p 1343-1351. https://doi.org/10.1002/jbm.a.3566410.1002/jbm.a.35664 ↗
28. E.M. Gonc, F.J. Oliveira, R.F. Silva, M.A. Neto, M.H. Fernandes and M. Amaral, Three-Dimensional Printed PCL-Hydroxyapatite Scaffolds Filled with CNTs for Bone Cell Growth Stimulation, J. Biomed. Mater. Res. Part B., 2015, 104, p 1210-1219. https://doi.org/10.1002/jbm.b.3343210.1002/jbm.b.33432 ↗
29. J. Suwanprateeb, R. Sanngam, W. Suvannapruk and T. Panyathanmaporn, Mechanical and In Vitro Performance of Apatite: Wollastonite Glass Ceramic Reinforced Hydroxyapatite Composite Fabricated by 3D-Printing, J. Mater. Sci. Mater. Med., 2009, 20, p 1281-1289. https://doi.org/10.1007/s10856-009-3697-110.1007/s10856-009-3697-1 ↗
30. S. Spath, P. Drescher and H. Seitz, Impact of Particle Size of Ceramic Granule Blends on Mechanical Strength and Porosity of 3D Printed Scaffolds, Materials (Basel)., 2015, 8, p 4720-4732. https://doi.org/10.3390/ma808472010.3390/ma8084720 ↗
31. R. Chumnanklang, T. Panyathanmaporn, K. Sitthiseripratip and J. Suwanprateeb, 3D Printing of Hydroxyapatite: Effect of Binder Concentration in Pre-coated Particle on Part Strength, Mater. Sci. Eng. C., 2007, 27, p 914-921. https://doi.org/10.1016/j.msec.2006.11.00410.1016/j.msec.2006.11.004 ↗
32. J. Will, R. Melcher, C. Treul, N. Travitzky, U. Kneser, E. Polykandriotis, R. Horch and P. Greil, Porous Ceramic Bone Scaffolds for Vascularized Bone Tissue Regeneration, J. Mater. Sci. Mater. Med., 2008, 19, p 2781-2790. https://doi.org/10.1007/s10856-007-3346-510.1007/s10856-007-3346-5 ↗
33. Z. Zhou, F. Buchanan, C. Mitchell and N. Dunne, Printability of Calcium Phosphate: Calcium Sulfate Powders for the Application of Tissue Engineered Bone Scaffolds Using the 3D Printing Technique, Mater. Sci. Eng. C., 2014, 38, p 1-10. https://doi.org/10.1016/j.msec.2014.01.02710.1016/j.msec.2014.01.027 ↗
34. Z. Zhou, E. Cunningham, A. Lennon, H. Mccarthy, F. Buchanan and N. Dunne, Development of Three-Dimensional Printing Polymer-Ceramic Scaffolds with Enhanced Compressive Properties and Tuneable Resorption Zuoxin, Mater. Sci. Eng. C., 2018 https://doi.org/10.1016/j.msec.2018.08.04810.1016/j.msec.2018.08.048 ↗
35. J. Li, R. Yan, Y. Yang and F. Xie, Water-Based Binder Preparation and Full-Color Printing Implementation of a Self-developed 3D Printer, Rapid Prototyp. J., 2021, 27, p 530-536. https://doi.org/10.1108/RPJ-12-2019-030510.1108/RPJ-12-2019-0305 ↗
36. H. Seitz, W. Rieder, S. Irsen, B. Leukers and C. Tille, Three-Dimensional Printing of Porous Ceramic Scaffolds for Bone Tissue Engineering, Wiley Intersci., 2005 https://doi.org/10.1002/jbm.b.3029110.1002/jbm.b.30291 ↗
37. A. Zocca, P. Lima, S. Diener, N. Katsikis and J. Günster, Additive Manufacturing of SiSiC by Layerwise Slurry Deposition and Binder Jetting (LSD-Print), J. Eur. Ceram. Soc., 2019, 39, p 3527-3533. https://doi.org/10.1016/j.jeurceramsoc.2019.05.00910.1016/j.jeurceramsoc.2019.05.009 ↗
38. W. Dum, M. Singh and D. Singh, Binder Jetting Additive Manufacturing of Silicon Carbide Ceramics: Development of Bimodal Powder Feedstocks by Modeling and Experimental Methods, Ceram. Int. J., 2020 https://doi.org/10.1016/j.ceramint.2020.04.09810.1016/j.ceramint.2020.04.098 ↗
39. A. Butscher, M. Bohner, C. Roth, A. Ernstberger, R. Heuberger, N. Doebelin and P.R. von Rohr, Ralph Müller, Printability of Calcium Phosphate Powders for Three-Dimensional Printing of Tissue Engineering Scaffolds, Acta Biomater., 2012, 7, p 373-385. https://doi.org/10.1016/j.actbio.2011.08.02710.1016/j.actbio.2011.08.027 ↗
40. C. Sun, X. Tian, L. Wang, Y. Liu, C.M. Wirth, J. Günster, D. Li and Z. Jin, Wirth, Jens Günster, Dichen Li, Effect of Particle Size Gradation on the Performance of Glass-Ceramic 3D Printing Process, Ceram. Int., 2016 https://doi.org/10.1016/j.ceramint.2016.09.19710.1016/j.ceramint.2016.09.197 ↗
41. Y. Luo, Z. Teng, X. Wang and Q. Wang, Development of Carboxymethyl Chitosan Hydrogel Beads in Alcohol-Aqueous Binary Solvent for Nutrient Delivery Applications, Food Hydrocoll., 2013, 31, p 332-339. https://doi.org/10.1016/j.foodhyd.2012.11.01110.1016/j.foodhyd.2012.11.011 ↗
42. DIN EN 725-8. Advanced Technical Ceramics: Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density (2006).
43. DIN EN 725-9. Advanced Technical Ceramics: Methods of Test for Ceramic Powders - Part 9: Determination of Untapped Bulk Density (2006).
44. Y. Bai, G. Wagner and C.B. Williams, Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals, J. Manuf. Sci. Eng., 2017 https://doi.org/10.1115/1.403664010.1115/1.4036640 ↗
45. A.B. Spierings and G. Levy, Comparison of Density of Stainless Steel 316L parts produced with Selective Laser Melting using Different Powder Grades, SFF Symp., 2009, 2009, p 1-12.
46. A. Zocca, C.M. Gomes, T. Mühler and J. Günster, Powder-Bed Stabilization for Powder-Based Additive Manufacturing, Adv. Mech. Eng., 2014 https://doi.org/10.1155/2014/49158110.1155/2014/491581 ↗
47. M. Castilho, J. Rodrigues, I. Pires, B. Gouveia, M. Pereira, C. Moseke, J. Groll, A. Ewald and E. Vorndran, Fabrication of Individual Alginate-TCP Scaffolds for Bone Tissue Engineering by Means of Powder Printing, Biofabrication, 2015 https://doi.org/10.1088/1758-5090/7/1/01500410.1088/1758-5090/7/1/015004 ↗
48. D.W. Richerson, Modern Ceramic Engineering: Properties, Processing, and Use in Design, CRC Press; 3rd edition (November 4, 2005), n.d.
49. A.E. Zemtsov, A.V. Golunov and A.S. Golunova, Regulating Rheological Properties of Binding Medium for Additive Technologies Using Polyvinylpyrrolidone, AIP Conf. Proc., 2017 https://doi.org/10.1063/1.499883310.1063/1.4998833 ↗
50. M.M. de Campos and M.C. do Ferreira, A Comparative Analysis of the Flow Properties Between Two Alumina-Based Dry Powders, Adv. Mater. Sci. Eng., 2013, 2013, p 1-7. https://doi.org/10.1155/2013/51984610.1155/2013/519846 ↗
51. M. Teodorescu and M. Bercea, Poly(vinylpyrrolidone): A Versatile Polymer for Biomedical and Beyond Medical Applications, Polym. Plast. Technol. Eng., 2015, 54, p 923-943. https://doi.org/10.1080/03602559.2014.97950610.1080/03602559.2014.979506 ↗
52. T.J. Fernandes, E. Mavropoulos, J.B. Campos, L.A. Gobbo and M.H. Prado da Silva, PVP Addition during Hydroxyapatite Synthesis: Effect on Albumin Adsorption, Key Eng. Mater., 2011, 493-494, p 757-762. https://doi.org/10.4028/www.scientific.net/kem.493-494.75710.4028/www.scientific.net/kem.493-494.757 ↗
53. M. Hayama, K.I. Yamamoto, F. Kohori, T. Uesaka, Y. Ueno, H. Sugaya, I. Itagaki and K. Sakai, Nanoscopic Behavior of Polyvinylpyrrolidone Particles on Polysulfone/Polyvinylpyrrolidone Film, Biomaterials, 2004, 25, p 1019-1028. https://doi.org/10.1016/S0142-9612(03)00629-X10.1016/S0142-9612(03)00629-X ↗
54. J. Liu, Michael Rynerson, BINDER COMPOSITION, US 2002/0189405 A1 (2002).
55. A.B. Spierings, N. Herres and G. Levy, Influence of the Particle Size Distribution on Surface Quality and Mechanical Properties in Additive Manufactured Stainless Steel Parts, Solid Free. Fabr., 2011, 17, p 195-202. https://doi.org/10.1108/1355254111112477010.1108/13552541111124770 ↗
56. J.H. Tan, W.L.E. Wong and K.W. Dalgarno, An Overview of Powder Granulometry on Feedstock and Part Performance in the Selective Laser Melting Process, Addit. Manuf., 2017, 18, p 228-255. https://doi.org/10.1016/j.addma.2017.10.01110.1016/j.addma.2017.10.011 ↗
57. P. Zhou, H. Qi, Z. Zhu, H. Qin, H. Li, C. Chu and M. Yan, Development of SiC/PVB Composite Powders for Selective Laser Sintering Additive Manufacturing of SiC, Materials (Basel)., 2018, 11, p 2012. https://doi.org/10.3390/ma1110201210.3390/ma11102012 ↗
58. G. Jacob, C.U. Brown and A. Donmez, The Influence of Spreading Metal Powders with Different Particle Size Distributions on the Powder Bed Density in Laser-Based Powder Bed Fusion Processes, Natl. Inst. Stand. Technol., 2018 https://doi.org/10.6028/NIST.AMS.100-1710.6028/NIST.AMS.100-17 ↗
59. P. Chavanne, S. Stevanovic, A. Wüthrich, O. Braissant, U. Pieles, P. Gruner and R. Schumacher, 3D Printed Chitosan/Hydroxyapatite Scaffolds for Potential Use in Regenerative Medicine, Biomed Tech., 2013 https://doi.org/10.1515/bmt-2013-406910.1515/bmt-2013-4069 ↗
60. S.N. Rath, L.A. Strobel, A. Arkudas, J.P. Beier, A.K. Maier, P. Greil, R.E. Horch and U. Kneser, Osteoinduction and Survival of Osteoblasts and Bone-Marrow Stromal Cells in 3D Biphasic Calcium Phosphate Scaffolds Under Static and Dynamic Culture Conditions, J. Cell. Mol. Med., 2012, 16, p 2350-2361. https://doi.org/10.1111/j.1582-4934.2012.01545.x10.1111/j.1582-4934.2012.01545.x ↗
61. C. Bergemann, M. Cornelsen, A. Quade, T. Laube, M. Schnabelrauch, H. Rebl, V. Weißmann, H. Seitz and B. Nebe, Continuous Cellularization of Calcium Phosphate Hybrid Scaffolds Induced by Plasma Polymer Activation, Mater. Sci. Eng. C., 2016, 59, p 514-523. https://doi.org/10.1016/j.msec.2015.10.04810.1016/j.msec.2015.10.048 ↗
62. Z. Zhou, A. Lennon, F. Buchanan, H.O. McCarthy and N. Dunne, Binder Jetting Additive Manufacturing of Hydroxyapatite Powders: Effects of Adhesives on Geometrical Accuracy and Green Compressive Strength, Addit. Manuf., 2020 https://doi.org/10.1016/j.addma.2020.10164510.1016/j.addma.2020.101645 ↗
63. N. Mehrban, J. Bowen, E. Vorndran, U. Gbureck and L.M. Grover, Structural Changes to Resorbable Calcium Phosphate Bioceramic Aged In Vitro, Colloids Surf. B Biointerfaces., 2013, 111, p 469-478. https://doi.org/10.1016/j.colsurfb.2013.06.02010.1016/j.colsurfb.2013.06.020 ↗
64. M. Castilho, C. Moseke, A. Ewald, U. Gbureck, J. Groll, I. Pires, J. Teßmar and E. Vorndran, Direct 3D Powder Printing of Biphasic Calcium Phosphate Scaffolds for Substitution of Complex Bone Defects, Biofabrication, 2014 https://doi.org/10.1088/1758-5082/6/1/01500610.1088/1758-5082/6/1/015006 ↗
65. P. Habibovic, U. Gbureck, C.J. Doillon, D.C. Bassett, C.A. van Blitterswijk and J.E. Barralet, Osteoconduction and Osteoinduction of Low-Temperature 3D Printed Bioceramic Implants, Biomaterials, 2008, 29, p 944-953. https://doi.org/10.1016/j.biomaterials.2007.10.02310.1016/j.biomaterials.2007.10.023 ↗