Tribological and Corrosion Behaviors of 304L and 317L Stainless Steel Coatings for Mechanical Parts Subjected to Friction and Wear
Source abstract
Abstract
Ball valves were subjected to severe working conditions that shortened the service life of their components and required additional costs for their maintenance and renovation. The ball valves were mainly made from 304 stainless steels (304 SSs). However, its low hardness and corrosion resistance had limited its use. In this study, 317L and 304L stainless steel coatings (317L SSC and 304L SSC, respectively) with thicknesses of 432 and 434 μm respectively were deposited on carbon steel substrates using the twin-wire arc spray system and were comparatively investigated. The mechanical, tribological, and electrochemical properties of the bulk 304 SS were also investigated. Microstructural analysis was carried out using x-ray diffraction, Raman Spectroscopy, Scanning Electron Microscopy and energy-dispersive x-ray spectroscopy. The surface roughness was characterized using Atomic Force Microscope. Lower porosity and oxides content were obtained for 304L SSC, while smooth surface with lower roughness were observed for 317L SSC. Hardness measurement revealed that 317L SSC had higher hardness than 304L SSC. The tribological characterization results showed that both coatings had excellent friction coefficient and wear resistance. The electrochemical tests were carried out in a 3.5wt.% NaCl solution and their results revealed that 304L SSC had a high corrosion resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. M. Laberge, E. Bousser, J. Schmitt, M. Koshigan, T. Schmitt, F. Khelfaoui, S. Isbitsky, L. Vernhes, and J.E. Klemberg-Sapieha, Predicting the Load-Carrying Capacity and Wear Resistance of Duplex-Coated Low-Strength Alloys for Severe Service Ball Valves, J. Therm. Spray Technol., 2018, 27(7), p 1177–1186.10.1007/s11666-018-0752-9 ↗
2. L. Vernhes, M. Azzi, E. Bousser, T. Schmitt, J.M. Lamarre, and J.E. Klemberg-Sapieha, Hybrid Co-Cr/W-WC and Ni-W-Cr-B/W-WC Coating Systems, J. Therm. Spray Technol., 2015, 25(1–2), p 346–356.
3. C.S. OuYang, X.B. Liu, Y.S. Luo, J. Liang, M. Wang, and D.Q. Chen, Preparation and High Temperature Tribological Properties of Laser In-Situ Synthesized Self-Lubricating Composite Coating on 304L Stainless Steel, J. Mater. Res. Technol., 2020, 9(4), p 7034–7046.10.1016/j.jmrt.2020.05.008 ↗
4. K. Tamalmani and H. Husin, Review on Corrosion Inhibitors for Oil and Gas Corrosion Issues, Appl. Sci., 2020, 10(10), p 3389.10.3390/app10103389 ↗
5. J. Ding, L. Zhang, M. Lu, J. Wang, Z. Wen, and W. Hao, The Electrochemical Behaviour of 316L Austenitic Stainless Steel in Cl- Containing Environment Under Different H2S Partial Pressures, Appl. Surf. Sci., 2014, 289, p 33–41.10.1016/j.apsusc.2013.10.080 ↗
6. G.O. Lauvstad, R. Johnsen, O. Borck, E.F. Silva, and J. Walmsley, Breakdown in Passivity of Austenitic Stainless Steels in Cl- and H2S - Modelling and Characterization of the Pit Initiation Process, NACE, 2007, 07660
7. A. Kocaman and O. Keles, Antibacterial Efficacy of Wire Arc Sprayed Copper Coatings Against Various Pathogens, J. Therm. Spray Tech., 2019, 28, p 504–513.10.1007/s11666-018-0824-x ↗
8. Y. Chen, B. Xu, Y. Liu, X. Liang, and Y. Xu, Structure and Sliding Wear Behavior of 321 Stainless Steel/Al Composite Coating Deposited by High Velocity Arc Spraying Technique, Trans. Nonferr. Metals Soc. China, 2008, 18(3), p 603–609.10.1016/S1003-6326(08)60105-3 ↗
9. J. Kawakita, T. Fukushima, S. Kuroda, and T. Kodama, Corrosion Behaviour of HVOF Sprayed SUS316L Stainless Steel in Seawater, Corros. Sci., 2002, 44(11), p 2561–2581.10.1016/S0010-938X(02)00030-6 ↗
10. W.C. Oliver, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 1992, 6, p 1564–1583.10.1557/JMR.1992.1564 ↗
11. M.D. Marko, J.P. Kyle, Y.S. Wang, and E.J. Terrell, Tribological Investigations of the Load, Temperature, and Time Dependence of Wear in Sliding Contact, PLOS ONE, 2017, 12(4), p e0175198.10.1371/journal.pone.0175198 ↗
12. A. Berradja, Electrochemical Techniques for Corrosion and Tribocorrosion Monitoring: Methods for the Assessment of Corrosion Rates, Corros. Inhibit., 2019 https://doi.org/10.5772/intechopen.8674310.5772/intechopen.86743 ↗
13. L. Pawlowsky, The Science and Engineering of Thermal Spray Coatings, John Wiley & Sons, New York, 1995.
14. H.K. Kang, Development of a Cathode Layer (La0.8Sr0.2MnO3) in a Solid Oxide Fuel Cell Using a Reactive Plasma Spray, Met. Mater. Int., 2004, 10(5), p 479–483.10.1007/BF03027352 ↗
15. J. Nohava, R. Musalek, J. Matejıcek, and M. Vilemova, A Contribution to Understanding the Results of Instrumented Indentation on Thermal Spray Coatings-Case Study on Al2O3 and Stainless Steel, Surf. Coat. Technol., 2014, 240, p 243–249.10.1016/j.surfcoat.2013.12.033 ↗
16. M.H.A. Malek, N.H. Saad, S.K. Abas, and N.M. Shah, Thermal Arc Spray Overview, IOP Conference Ser.: Mater. Sci. Eng., 2013, 46, 01202810.1088/1757-899X/46/1/012028 ↗
17. B. Sun, H. Fukanuma, and N. Ohno, Study on Stainless Steel 316L Coatings Sprayed by a Novel High Pressure HVOF, Surf. Coat. Technol., 2014, 239, p 58–64.10.1016/j.surfcoat.2013.11.018 ↗
18. S.F. Bonabi, F. Ashrafizadeh, A. Sanati, and S.M. Nahvi, Structure and Corrosion Behavior of Arc-Sprayed Zn-Al Coatings on Ductile Iron Substrate, J. Therm. Spray Tech., 2018, 27, p 524–537.10.1007/s11666-018-0694-2 ↗
19. M.I. Boulos, P. Fauchais, and E. Pfender, Wire-Arc Spray Torches, Handbook of Thermal Plasmas, Springer International Publishing, Switzerland, 2018, p 1–52
20. X. Meng, J. Zhang, W. Han, and J. Zhao, Fracture Behavior of Cold Sprayed 304L Stainless Steel Coating During Cold Rolling, J. Iron Steel Res. Int., 2012, 19, p 57–63.10.1016/S1006-706X(13)60021-7 ↗
21. A. Belamri, A. Ati, M. Braccini, and S. Azem, Hypereutectoid Steel Coatings Obtained by Thermal Flame Spraying—Effect of Annealing on Microstructure, Tribological Properties and Adhesion Energy, Surf. Coat. Technol., 2015, 263, p 86–99.10.1016/j.surfcoat.2014.12.001 ↗
22. M. Villa, S. Dosta, and J.M. Guilemany, Optimization of 316L Stainless Steel Coatings on Light Alloys Using Cold Gas Spray, Surf. Coat. Technol., 2013, 235, p 220–225.10.1016/j.surfcoat.2013.07.036 ↗
23. V.E. Porsev, A.L. Ulyanov, and G.A. Dorofeev, Atomic Redistribution in a Fe-Cr System in the Course of Mechanical Alloying and Subsequent Annealing, Metall. Mater. Trans. A, 2019, 50, p 5977–5989.10.1007/s11661-019-05461-0 ↗
24. M.M. Abdullah, F.M. Rajab, and S.M. Al-Abbas, Structural and Optical Characterization of Cr2O3 Nanostructures: Evaluation of its Dielectric Properties, AIP Adv., 2014, 4, p 027121.10.1063/1.4867012 ↗
25. H. Edris, A. Shafyei, H. Salimi-Jazi, and E. Abdolvand, Evaluation of Hydrogen Permeation Through Standalone Thermally Sprayed Coatings of AISI 316L Stainless Steel, Int. J. Hydrog. Energy, 2018, 43(9), p 4657–4670.10.1016/j.ijhydene.2018.01.021 ↗
26. E. Song, B. Hwang, S. Lee, N.J. Kima, and J. Ahn, Correlation of Microstructure with Hardness and Wear Resistance of Stainless Steel Blend Coatings Fabricated by Atmospheric Plasma Spraying, Mater. Sci. Eng. A, 2006, 429, p 189–195.10.1016/j.msea.2006.05.087 ↗
27. S. García-Rodríguez, A.J. López, B. Torres, and J. Rams, 316L Stainless Steel Coatings on ZE41 Magnesium Alloy Using HVOF Thermal Spray for Corrosion Protection, Surf. Coat. Technol., 2016, 287, p 9–19.10.1016/j.surfcoat.2015.12.075 ↗
28. N. Mironova-Ulmane, A. Kuzmin, I. Sildos, and M. Pärs, Polarisation Dependent Raman Study of Single-Crystal Nickel Oxide, Cent. Eur. J. Phys., 2011, 9, p 1096–1099.
29. K. Chemaa, S. Hassani, and M. Gaceb, Characterization and Tribological Properties of W-Ti-N/Al-Si Multilayer Surface Coating for Iron Alloy Pistons, J. Mater. Eng. Perform., 2021, 30, p 8023–8029.10.1007/s11665-021-05996-7 ↗
30. K. Chemaa, S. Hassani, M. Gaceb, N. Madaoui, and A. Guebli, W-Ti-N Thin Film Tribological Behaviour for Piston Skirt Properties Improvement, Surf. Eng., 2020, 37(6), p 732–738.10.1080/02670844.2020.1827127 ↗
31. H. Guo, S. Zhang, W. Sun, and J. Wang, Differences in Dry Sliding Wear Behavior Between HVAF-Sprayed Amorphous Steel and Crystalline Stainless Steel Coatings, J. Mater. Sci. Technol., 2019, 35(5), p 865–874.10.1016/j.jmst.2018.11.006 ↗
32. M. Mohanty, R.W. Smith, M. DeBonte, J.P. Celis, and E. Lugscheider, Sliding Wear Behavior of Thermally Sprayed 75/25 Cr3C2/NiCr Wear Resistant Coatings, Wear, 1996, 198(1–2), p 251–266.10.1016/0043-1648(96)06983-9 ↗
33. B. Xu, Z. Zhu, S. Ma, W. Zhang, and W. Liu, Sliding Wear Behavior of Fe-Al and Fe-Al/WC Coatings Prepared by High Velocity Arc Spraying, Wear, 2004, 257, p 1089–1095.10.1016/j.wear.2004.05.012 ↗
34. X.Q. Li, H.J. Wang, Y.M. Guo, M. Liu, and K.K. Zhao, Tribological Properties of NiCr-Cr3C2-Ni/MoS2 Supersonic Plasma Sprayed Coating under Different Temperatures, Adv. Mater. Res., 2011, 399–401, p 2061–2066.
35. L. Fan, H. Chen, Y. Dong, L. Dong, and Y. Yin, Wear and Corrosion Resistance of Laser-Cladded Fe-Based Composite Coatings on AISI 4130 Steel, Int. J. Miner. Metall. Mater., 2018, 25, p 716–728.10.1007/s12613-018-1619-2 ↗
36. R. Tyagi, S.K. Nath, and S. Ray, Effect of Martensite Content on Friction and Oxidative Wear Behavior of 0.42 Pct Carbon Dual-Phase Steel, Metall. Mater. Trans. A, 2002, 33, p 3479–3488.10.1007/s11661-002-0335-7 ↗
37. J.M. Guilemany, J. Fernandez, N. Espallargas, P.H. Suegama, and A.V. Benedetti, Influence of Spraying Parameters on the Electrochemical Behaviour of HVOF Thermally Sprayed Stainless Steel Coatings in 3.4% NaCl, Surf. Coat. Technol., 2006, 200(9), p 3064–3072.10.1016/j.surfcoat.2005.02.116 ↗
38. P.H. Suegama, C.S. Fugivara, A.V. Benedetti, J. Fernandez, J. Delgado, and J.M. Guilemany, Electrochemical Behavior of Thermally Sprayed Stainless Steel Coatings in 3.4% NaCl Solution, Corr. Sci., 2005, 47(3), p 605–620.10.1016/j.corsci.2004.07.003 ↗
39. K. Spencer and M.X. Zhang, Optimisation of Stainless Steel Cold Spray Coatings Using Mixed Particle Size Distributions, Surf. Coat. Technol., 2011, 205(21–22), p 5135–5140.10.1016/j.surfcoat.2011.05.020 ↗
40. L. Zhao and E. Lugscheider, Influence of the Spraying Processes on the Properties of 316L Stainless Steel Coatings, Surf. Coat. Technol., 2002, 162(1), p 6–10.10.1016/S0257-8972(02)00560-1 ↗