Investigation of the Hot Stamping Process for TRIP Steel with High Strength and High Ductility
Source abstract
Abstract
In order to obtain the products with high strength and ductility, the hot stamping technology of TRIP steel has been getting more attention in recent years. In this study, the effects of cooling rate on the mechanical properties of a typical TRIP780 steel used in hot stamping process were investigated with tensile tests, bending tests and impact tests. It was found that even though a lower cooling rate for the quenching of TRIP780 steel led to the formation of the bainite and ferrite mixture phases, the mechanical properties of the material containing these phases were similar to those of the material containing martensite only. TRIP780 steel exhibited twice the elongation with a similarly high strength as compared with the conventional boron steel, and its mechanical properties are insensitive to cooling rate, which was approved by the hot stamping experiment of a U-cap part.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. H. Karbasian and A.E. Tekkaya, A Review on Hot Stamping, J. Mater. Process. Technol., 2010, 210, p 2103–211810.1016/j.jmatprotec.2010.07.019 ↗
2. K. Mori, P.F. Bariani, B.A. Behrens, A. Brosius, S. Bruschi, T. Maeno, M. Merklein, and J. Yanagimoto, Hot Stamping of Ultra-High Strength Steel Parts, CIRP Ann. Manuf. Technol., 2017, 66, p 755–77710.1016/j.cirp.2017.05.007 ↗
3. S. Vandeputte, D. Vanderschhuern, S. Classens, Modern Steel Grades Covering all Needs of the Automotive Industry. In: Ninth International Conference on Steel Sheet Metal, Leuven, 2001, pp. 405–414.
4. X.H. Han, Y.Y. Zhong, K. Yang, Z.S. Cui, and J. Chen, Application of Hot Stamping Process by Integrating Quenching & Partitioning Heat Treatment to Improve Mechanical Properties, Proc. Eng., 2014, 81, p 1737–174310.1016/j.proeng.2014.10.223 ↗
5. K. Liu, B. Chi, Z.M. Shi, J.B. Liu, and L. Jian, Optimization of the Product of Strength and Plasticity of Hot-Stamped WHT1300HF High Strength Steel, Adv. Mater. Res., 2013, 798, p 280–285
6. L. Ying, Y. Chang, P. Hu, G. Shen, L. Liu, and X. Li, Influence of Low Tempering Temperature on Fracture Toughness of Ultra High Strength Boron Steel for Hot Forming, Adv. Mater. Res., 2011, 146, p 160–16510.4028/www.scientific.net/AMR.311-313.160 ↗
7. M. Naderi, M. Abbasi, and A. Saeed-Akbari, Enhanced Mechanical Properties of a Hot-Stamped Advanced High-Strength Steel Via Tempering Treatment, Metall. Mater. Trans. A, 2013, 44, p 1852–186110.1007/s11661-012-1546-1 ↗
8. M. Naderi, M. Ketabchi, M. Abbasi, and W. Bleck, Semi-Hot Stamping as an Improved Process of Hot Stamping, J. Mater. Sci. Technol., 2011, 27, p 369–37610.1016/S1005-0302(11)60076-5 ↗
9. J.G. Speer, D.K. Matlock, B.C.D. Cooman, and J.G. Schroth, Carbon Partitioning into Austenite After Martensite Transformation, Aata Materialia, 2003, 51, p 2611–262210.1016/S1359-6454(03)00059-4 ↗
10. J.G. Speer, E.D. Moor, and A.J. Clarke, Critical assessment 7: Quenching and Partitioning, Mater. Sci. Technol., 2015, 31, p 3–910.1179/1743284714Y.0000000628 ↗
11. H. Liu, X. Jin, H. Dong, and J. Shi, Martensitic Microstructural Transformations from the Hot Stamping, Quenching and Partitioning Process, Mater Charact., 2011, 62, p 223–22710.1016/j.matchar.2010.12.003 ↗
12. H. Liu, X. Lu, X. Jin, H. Dong, and J. Shi, Enhanced Mechanical Properties of a Hot Stamped Advanced High-Strength Steel Treated by Quenching and Partitioning Process, Scripta Mater, 2011, 64, p 749–75210.1016/j.scriptamat.2010.12.037 ↗
13. X.H. Han, Y.Y. Zhong, P.S. Xin, Z.S. Cui, and J. Chen, Research on One-Step Quenching and Partitioning Treatment and Its Application in Hot Stamping Process. Proc, Inst. Mech. Eng. Part B J. Eng. Manuf., 2017, 231, p 1972–198210.1177/0954405415616062 ↗
14. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, and T. Antretter, A New View on Transformation Induced Plasticity (TRIP), Int. J. Plast., 2000, 16, p 723–74810.1016/S0749-6419(99)00078-9 ↗
15. R. Rana, C.H. Carson, and J.G. Speer, Hot Forming Response of Medium Manganese Transformation Induced Plasticity Steels, Verlag Wissenschaftliche Scripten, Auerbach, 2015
16. H.J. Pan, M.H. Cai, H. Ding, H.S. Huang, B. Zhu, Y.L. Wang, and Y.S. Zhang, Microstructure Evolution and Enhanced Performance of a Novel Nb-Mo Microalloyed Medium Mn Alloy Fabricated by Low-Temperature Rolling and Warm Stamping, Mater. Des., 2017, 134, p 352–36010.1016/j.matdes.2017.08.047 ↗
17. E.A. Ariza, A.S. Nishikawa, H. Goldenstein, and A.P. Tschiptschin, Characterization and Methodology for Calculating the Mechanical Properties of a TRIP-Steel Submitted to Hot Stamping and Quenching and Partitioning (Q&P), Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 2016, 671, p 54–6910.1016/j.msea.2016.06.038 ↗
18. E.A. Ariza, M. Masoumi, and A.P. Tschiptschin, Improvement of Tensile Mechanical Properties in a TRIP-Assisted Steel by Controlling of Crystallographic Orientation Via HSQ&P Processes, Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 2018, 713, p 223–23310.1016/j.msea.2017.12.046 ↗
19. X.H. Han, Y.Y. Zhong, S.L. Tan, Y.N. Ding, and J. Chen, Microstructure and Performance Evaluations on Q&P Hot Stamping Parts of Several UHSS Sheet Metals, Sci. China Technol. Sci., 2017, 60, p 1692–170110.1007/s11431-016-9111-y ↗
20. F.S. LePera, Improved Etching Technique to Emphasize Martensite and Bainite in High-Strength Dual-Phase Steel, J. Met., 1980, 32, p 38–39
21. X.D. Chen, Y.Y. Li, X.H. Han, and J.B. Zhang, Size Effect Studies on Tensile Tests for Hot Stamping Steel, J. Mater. Eng. Perform., 2018, 27, p 1–810.1007/s11665-017-2747-y ↗
22. T. Nishibata and N. Kojima, Effect of Quenching Rate on Hardness and Microstructure of Hot-Stamped Steel, J. Alloy. Compd., 2013, 577, p S549–S55410.1016/j.jallcom.2011.12.154 ↗
23. K. Liu, B. Chi, Z.M. Shi, J.B. Liu, and L. Jian, Optimization of the Product of Strength and Plasticity of Hot-Stamped WHT1300HF High Strength Steel, Adv. Mater. Res., 2013, 798, p 280–285
24. Z. Yan, X. Han, X. Hao, and X. Kong, Experimental Study on Thermodynamic Performance of Boron Steel B1500HS Used for Hot Stamping Process, J. Plast. Eng., 2013, 20, p 97–101
25. M.J. Santofimia, T. Nguyen-Minh, L. Zhao, R. Petrov, I. Sabirov, and J. Sietsma, New Low Carbon Q&P Steels Containing Film-Like Intercritical Ferrite, Mater. Sci. Eng. A, 2010, 527, p 6429–643910.1016/j.msea.2010.06.083 ↗