Microstructural Characteristics and Mechanical Performance of WAAM Fabricated LCS–SS 316L Bimetallic Structure Under Forced Cooling
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. C. Huang, P. Kyvelou, R. Zhang, T. Ben Britton, and L. Gardner, Mechanical Testing and Microstructural Analysis of Wire Arc Additively Manufactured Steels, Mater. Des., 2022, 216, p 110544. https://doi.org/10.1016/j.matdes.2022.11054410.1016/j.matdes.2022.110544 ↗
2. A. Iso, 2015. ISO/ASTM 52900: 2015 Additive Manufacturing–General Principles–Terminology. ASTM F2792-10e1, 1: pp. 1-19.
3. S. Fan, X. Guo, Z. Li, J. Ma, F. Li, and Q. Jiang, A Review of High-Strength Aluminum-Copper Alloys Fabricated by Wire Arc Additive Manufacturing: Microstructure, Properties, Defects, and Post-processing, J. Mater. Eng. Perform., 2023, 32(19), p 8517–8540. https://doi.org/10.1007/s11665-023-08233-510.1007/s11665-023-08233-5 ↗
4. D. Chakraborty, T. Tirumala, S. Chitral, B.N. Sahoo, D.V. Kiran, and P.A. Kumar, The State of the Art for Wire Arc Additive Manufacturing Process of Titanium Alloys for Aerospace Applications, J. Mater. Eng. Perform., 2022, 31(8), p 6149–6182. https://doi.org/10.1007/s11665-022-07128-110.1007/s11665-022-07128-1 ↗
5. P. Badoniya, M. Srivastava, P.K. Jain, and A. Kumar, Microstructural Refinement and Stregthening of Wire Arc Additively Manufactured Construction Grade Low Carbon Steel Through Heat Treatment, Structures, 2024, 68, p 107153. https://doi.org/10.1016/j.istruc.2024.10715310.1016/j.istruc.2024.107153 ↗
6. G. Thangamani, C.K. Pandiyan, S. Doloi, A. Wagh, K. Tomar, S.K. Tamang, and P.I. Anand, Investigation of Fabricating Stainless Steel 304L Thin-Wall Structure Using Laser Marking-Assisted Wire Arc Additive Manufacturing Process, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-10163-910.1007/s11665-024-10163-9 ↗
7. S. Rathee and M. Srivastava, 2024. Wire Arc Additive Manufacturing: Fundamental Sciences and Advances.10.1201/9781003363415 ↗
8. P. Badoniya, M. Srivastava, P.K. Jain, and S. Rathee, Parametric Investigation on Wire Arc Additive Manufacturing of ER70S-6 Low-Carbon Steel for Fabrication of Thick-Walled Parts, J. Adhesion Sci. Technol., 2023, 5, p 1–28.
9. P. Badoniya, A. Yadav, M. Srivastava, P.K. Jain, and S. Rathee, Fabrication of Functionally Graded Materials (FGMs) Via Additive Manufacturing Route, (Issue): pp. 191–213 (2021).10.1007/978-981-16-7377-1_9 ↗
10. U. Gürol, E. Kocaman, S. Dilibal, and M. Koçak, A Comparative Study on the Microstructure, Mechanical Properties, Wear and Corrosion Behaviors of SS 316 Austenitic Stainless Steels Manufactured by Casting and WAAM Technologies, CIRP J. Manuf. Sci. Technol., 2023, 47, p 215–227. https://doi.org/10.1016/j.cirpj.2023.10.00510.1016/j.cirpj.2023.10.005 ↗
11. L.P. Raut and R.V. Taiwade, Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions, J. Mater. Eng. Perform., 2021, 30(7), p 4768–4791. https://doi.org/10.1007/s11665-021-05871-510.1007/s11665-021-05871-5 ↗
12. S. Singh, A.N. Jinoop, I.A. Palani, C.P. Paul, K.P. Tomar, and K.G. Prashanth, Microstructure and Mechanical Properties of NiTi-SS Bimetallic Structures Built Using Wire Arc Additive Manufacturing, Mater. Lett., 2021, 303, p 130499.10.1016/j.matlet.2021.130499 ↗
13. A. Rajesh Kannan, S. Mohan Kumar, R. Pramod, N. Pravin Kumar, N. Siva Shanmugam, and Y. Palguna, Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Bi-Metallic Structure, Sci. Technol. Weld. Joining, 2021, 26(1), p 47–57.10.1080/13621718.2020.1833140 ↗
14. U. Gürol, B. Turgut, H. Kumek, S. Dilibal, and M. Koçak, Fabrication and Characterization of Wire Arc Additively Manufactured Ferritic-Austenitic Bimetallic Structure, Metals Mater. Int., 2023, 7, p 1–14.
15. A. Motwani, A. Kumar, Y. Puri, and N.K. Lautre, Mechanical Characteristics and Microstructural Investigation of CMT Deposited Bimetallic SS316LSi-IN625 Thin Wall for WAAM, Weld. World, 2023, 67(4), p 967–980.10.1007/s40194-022-01403-4 ↗
16. M.R.U. Ahsan, A.N.M. Tanvir, T. Ross, A. Elsawy, M.-S. Oh, and D.B. Kim, Fabrication of Bimetallic Additively Manufactured Structure (BAMS) of Low Carbon Steel and 316L Austenitic Stainless Steel with Wire+ Arc Additive Manufacturing, Rap. Protot. J., 2020, 26(3), p 519–530.10.1108/RPJ-09-2018-0235 ↗
17. J.L. Galán Argumedo, M. Mahmoudiniya, T.E. Reinton, L.A.I. Kestens, M.J.M. Hermans, and V.A. Popovich, Functional Grading of Low Alloy Steel to 316 L by Wire Arc Additive Manufacturing–Microstructural and Mechanical Characterization of Bi-Metal Interface, J. Mater. Process. Technol., 2024, 325, p 118305. https://doi.org/10.1016/j.jmatprotec.2024.11830510.1016/j.jmatprotec.2024.118305 ↗
18. L.P. Raut and R.V. Taiwade, Microstructure and Mechanical Properties of Wire Arc Additively Manufactured Bimetallic Structure of Austenitic Stainless Steel and Low Carbon Steel, J. Mater. Eng. Perform., 2022, 31(10), p 8531–8541.10.1007/s11665-022-06856-8 ↗
19. P. Badoniya, M. Srivastava, P.K. Jain, and S. Rathee, A State-of-the-Art Review on Metal Additive Manufacturing: Milestones, Trends, Challenges and Perspectives, J. Braz. Soc. Mech. Sci. Eng., 2024, 46(6), p 339. https://doi.org/10.1007/s40430-024-04917-810.1007/s40430-024-04917-8 ↗
20. D. Ma, C. Xu, S. Sui, J. Tian, C. Guo, X. Wu, Z. Zhang, D. Shechtman, and S. Remennik, Enhanced Strength-Ductility Synergy in a Wire and Arc Additively Manufactured Mg Alloy Via Tuning Interlayer Dwell Time, J. Mag. Alloys, 2023, 11(12), p 4696–4709. https://doi.org/10.1016/j.jma.2023.01.01510.1016/j.jma.2023.01.015 ↗
21. N. Kozamernik, D. Bračun, and D. Klobčar, WAAM System with Interpass Temperature Control and Forced Cooling for Near-Net-Shape Printing of Small Metal Components, Int. J. Adv. Manuf. Technol., 2020, 110, p 1955–1968.10.1007/s00170-020-05958-8 ↗
22. V.T. Le, D.S. Mai, and H. Paris, Influences of the Compressed Dry Air-Based Active Cooling on External and Internal Qualities of Wire-Arc Additive Manufactured Thin-Walled SS308L Components, J. Manuf. Process., 2021, 62, p 18–27. https://doi.org/10.1016/j.jmapro.2020.11.04610.1016/j.jmapro.2020.11.046 ↗
23. W. Hackenhaar, J.A.E. Mazzaferro, F. Montevecchi, and G. Campatelli, An Experimental-Numerical Study of Active Cooling in Wire Arc Additive Manufacturing, J. Manuf. Process., 2020, 52, p 58–65. https://doi.org/10.1016/j.jmapro.2020.01.05110.1016/j.jmapro.2020.01.051 ↗
24. B. Wu, Z. Pan, D. Ding, D. Cuiuri, H. Li, and Z. Fei, The Effects of Forced Interpass Cooling on the Material Properties of Wire Arc Additively Manufactured Ti6Al4V Alloy, J. Mater. Process. Technol., 2018, 258, p 97–105.10.1016/j.jmatprotec.2018.03.024 ↗
25. C. Ma, C. Li, Y. Yan, Y. Liu, X. Wu, D. Li, Y. Han, H. Jin, and F. Zhang, Investigation of the In-Situ Gas Cooling of Carbon Steel During Wire and Arc Additive Manufacturing, J. Manuf. Process., 2021, 67, p 461–477. https://doi.org/10.1016/j.jmapro.2021.05.02210.1016/j.jmapro.2021.05.022 ↗
26. J.W. Elmer, S.M. Allen, and T.W. Eagar, Microstructural Development During Solidification of Stainless Steel Alloys, Metall. Trans. A, 1989, 20(10), p 2117–2131. https://doi.org/10.1007/BF0265029810.1007/BF02650298 ↗
27. K. Rajasekhar, C.S. Harendranath, R. Raman, and S.D. Kulkarni, Microstructural Evolution During Solidification of Austenitic Stainless Steel Weld Metals: A Color Metallographic and Electron Microprobe Analysis Study, Mater. Charact., 1997, 38(2), p 53–65.10.1016/S1044-5803(97)80024-1 ↗
28. J.W. Elmer, S.M. Allen, and T.W. Eagar, Microstructural Development During Solidification of Stainless Steel Alloys, Metall. Trans. A, 1989, 20, p 2117–2131.10.1007/BF02650298 ↗
29. Y. Li, Y. Luo, J. Li, D. Song, B. Xu, and X. Chen, Ferrite Formation and its Effect on Deformation Mechanism of Wire Arc Additive Manufactured 308 L Stainless Steel, J. Nucl. Mater., 2021, 550, p 152933. https://doi.org/10.1016/j.jnucmat.2021.15293310.1016/j.jnucmat.2021.152933 ↗
30. M. Rafieazad, A.V. Nemani, M. Ghaffari, and A. Nasiri, On Microstructure and Mechanical Properties of a Low-Carbon Low-Alloy Steel Block Fabricated by Wire Arc Additive Manufacturing, J. Mater. Eng. Perform., 2021, 30(7), p 4937–4945. https://doi.org/10.1007/s11665-021-05568-910.1007/s11665-021-05568-9 ↗
31. N.A. Rosli and M.R. Alkahari, Review on Effect of Heat Input for Wire Arc Additive Manufacturing Process, J. Market. Res., 2021, 11, p 2127–2145.
32. J. Race and H. Bhadeshia, (Year), Carbon Diffusion Across Dissimilar Steel Welds.
33. Y. Chen, X. Zuo, W. Zhang, Z. Hao, Y. Li, Z. Luo, and S. Ao, Enhanced Strength-Ductility Synergy of Bimetallic Laminated Steel Structure of 304 Stainless Steel and Low-Carbon Steel Fabricated by Wire and Arc Additive Manufacturing, Mater. Sci. Eng. A, 2022, 856, p 143984. https://doi.org/10.1016/j.msea.2022.14398410.1016/j.msea.2022.143984 ↗
34. S. Shakerin, A. Hadadzadeh, B.S. Amirkhiz, S. Shamsdini, J. Li, and M. Mohammadi, Additive Manufacturing of Maraging Steel-H13 Bimetals Using Laser Powder Bed Fusion Technique, Addit. Manuf., 2019, 29, p 100797. https://doi.org/10.1016/j.addma.2019.10079710.1016/j.addma.2019.100797 ↗
35. P. Dirisu, G. Supriyo, F. Martina, X. Xu, and S. Williams, Wire Plus Arc Additive Manufactured Functional Steel Surfaces Enhanced by Rolling, Int. J. Fatigue, 2020, 130, p 105237. https://doi.org/10.1016/j.ijfatigue.2019.10523710.1016/j.ijfatigue.2019.105237 ↗
36. K. Morshed-Behbahani, A. Hadadzadeh, and A. Nasiri, Electrochemical Insight into the Passivity and Corrosion of 316 L Stainless Steel Fabricated Through Wire Arc Additive Manufacturing, Colloids Surf. A, 2024, 693, p 134085. https://doi.org/10.1016/j.colsurfa.2024.13408510.1016/j.colsurfa.2024.134085 ↗
37. S. Salahi, A.V. Nemani, M. Ghaffari, J. Lunde, and A. Nasiri, On Microstructure, Crystallographic Orientation, and Corrosion Properties of Wire Arc Additive Manufactured 420 Martensitic Stainless Steel: Effect of the Inter-Layer Temperature, Addit. Manuf., 2021, 46, p 102157. https://doi.org/10.1016/j.addma.2021.10215710.1016/j.addma.2021.102157 ↗
38. G. Nolze, M. Jürgens, J. Olbricht, and A. Winkelmann, Improving the Precision of Orientation Measurements from Technical Materials Via EBSD Pattern Matching, Acta Mater., 2018, 159, p 408–415. https://doi.org/10.1016/j.actamat.2018.08.02810.1016/j.actamat.2018.08.028 ↗
39. J. Yang, P. Ji, J. Zhang, W. Xu, J. Jiao, Y. Lian, L. Jiang, and B. Zhang, Effect of Current Density on the Texture, Residual Stress, Microhardness and Corrosion Resistance of Electrodeposited Chromium Coating, Surf. Coat. Technol., 2023, 471, p 129868. https://doi.org/10.1016/j.surfcoat.2023.12986810.1016/j.surfcoat.2023.129868 ↗
40. H. Ming, Z. Zhang, J. Wang, E.-H. Han, P. Wang, and Z. Sun, Microstructure of a Safe-End Dissimilar Metal Weld Joint (SA508-52-316L) Prepared by Narrow-Gap GTAW, Mater. Charact., 2017, 123, p 233–243.10.1016/j.matchar.2016.11.029 ↗
41. J. Liu, Y. Miao, C. Wei, Z. Wang, Y. Zhao, and Y. Wu, Enhanced Mechanical Properties in Nickel-Aluminium Bronze Alloy Via Wire Arc Additive Manufacturing with Follow-Weld Forced Cooling, Mater. Charact., 2024, 208, p 113653. https://doi.org/10.1016/j.matchar.2024.11365310.1016/j.matchar.2024.113653 ↗
42. L.B.O. Souza, M.R.N. Santos, R.P. Garcia, D.B. Fernandes, and L.O. Vilarinho, Characterization of an Austenitic Stainless Steel Preform Deposited by Wire Arc Additive Manufacturing, Int. J. Adv. Manuf. Technol., 2022, 123(9), p 3673–3686.10.1007/s00170-022-10382-1 ↗
43. U. Gürol, B. Turgut, H. Kumek, S. Dilibal, and M. Koçak, Fabrication and Characterization of Wire Arc Additively Manufactured Ferritic-Austenitic Bimetallic Structure, Met. Mater. Int., 2024, 30(5), p 1342–1355. https://doi.org/10.1007/s12540-023-01568-710.1007/s12540-023-01568-7 ↗
44. P. Badoniya, M. Srivastava, and P.K. Jain, Effect of Interlayer Forced Cooling Strategies on Wire Arc Additively Manufactured SS 316L. Mater. Today Commun., 2025, 43, p 111758. https://doi.org/10.1016/j.mtcomm.2025.11175810.1016/j.mtcomm.2025.111758 ↗