Optimization of FDM 3D Printing Process Parameters for Improving Wear Characteristics of PLA-nGr Composite using Taguchi DOE
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A. Kaushik and R.K. Garg, Tapping the Potential of Rapid Prototyping Techniques in Creating a Paradigm Shift in the Fabrication of Occlusal Splints, Rapid Prototyp. J., 2023 https://doi.org/10.1108/RPJ-12-2022-041210.1108/RPJ-12-2022-0412 ↗
2. F. Wang and F. Wang, Liquid Resins-Based Additive Manufacturing, J. Mol. Eng. Mater., 2017, 5(02), p 1740004. https://doi.org/10.1142/S225123731740004410.1142/S2251237317400044 ↗
3. S. Singh, R. K. Attri, and S. Trivedi, Polymer & Composites 3D Printable Polymer Nanocomposites: Challenges, Availability and Future, vol. 2810, pp. 38–55, 2023.
4. Y.P. Shaik, J. Schuster, and A. Shaik, A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes, OALib, 2021, 08(08), p 1–19. https://doi.org/10.4236/oalib.110769810.4236/oalib.1107698 ↗
5. L. Bergonzi and M. Vettori, Mechanical Properties Comparison Between New and Recycled Polyethylene Terephthalate Glycol Obtained from Fused Deposition Modelling Waste, Mater. Des. Process. Commun., 2021 https://doi.org/10.1002/mdp2.25010.1002/mdp2.250 ↗
6. S. Park and K.K. Fu, Polymer-Based Filament Feedstock for Additive Manufacturing, Compos. Sci. Technol., 2021, 213, p 108876. https://doi.org/10.1016/j.compscitech.2021.10887610.1016/j.compscitech.2021.108876 ↗
7. B. Kaygusuz and S. Özerinç, Improving the Ductility of Polylactic Acid Parts Produced by Fused Deposition Modeling through Polyhydroxyalkanoate Additions, J. Appl. Polym. Sci., 2019, 136(43), p 1–8. https://doi.org/10.1002/app.4815410.1002/app.48154 ↗
8. V. Monfared, H.R. Bakhsheshi-Rad, S. Ramakrishna, M. Razzaghi, and F. Berto, A Brief Review on Additive Manufacturing of Polymeric Composites and Nanocomposites, Micromachines, 2021 https://doi.org/10.3390/mi1206070410.3390/mi12060704 ↗
9. S.C. Daminabo, S. Goel, S.A. Grammatikos, H.Y. Nezhad, and V.K. Thakur, Fused Deposition Modeling-Based Additive Manufacturing (3D printing): Techniques for Polymer Material Systems, Mater. Today Chem., 2020, 16, p 100248. https://doi.org/10.1016/j.mtchem.2020.10024810.1016/j.mtchem.2020.100248 ↗
10. S. Martínez-Pellitero, M.A. Castro, A.I. Fernández-Abia, S. González, and E. Cuesta, Analysis of Influence Factors on Part Quality in Micro-SLA Technology, Procedia Manuf., 2017, 13, p 856–863. https://doi.org/10.1016/j.promfg.2017.09.14310.1016/j.promfg.2017.09.143 ↗
11. R. Srinivasan, N. Aravindkumar, S.A. Krishna, S. Aadhishwaran, and J. George, Influence of Fused Deposition Modelling Process Parameters on Wear Strength of Carbon Fibre PLA, Mater. Today Proc., 2020, 27, p 1794–800. https://doi.org/10.1016/j.matpr.2020.03.73810.1016/j.matpr.2020.03.738 ↗
12. S. Deswal, R. Narang, and D. Chhabra, Modeling and Parametric Optimization of FDM 3D Printing Process using Hybrid Techniques for Enhancing Dimensional Preciseness, Int. J. Interact. Des. Manuf., 2019, 13(3), p 1197–1214. https://doi.org/10.1007/s12008-019-00536-z10.1007/s12008-019-00536-z ↗
13. M.F. Arif, H. Alhashmi, K.M. Varadarajan, J.H. Koo, A.J. Hart, and S. Kumar, Multifunctional Performance of Carbon Nanotubes and Graphene Nanoplatelets Reinforced PEEK Composites Enabled via FFF Additive Manufacturing, Compos. Part B Eng., 2020, 184, p 107625. https://doi.org/10.1016/j.compositesb.2019.10762510.1016/j.compositesb.2019.107625 ↗
14. G. Cicala, A. Latteri, B. Del Curto, A. Lo Russo, G. Recca, and S. Farè, Engineering Thermoplastics for Additive Manufacturing: A Critical Perspective with Experimental Evidence to Support Functional Applications, J. Appl. Biomater. Funct. Mater., 2017, 15(1), p 10–8. https://doi.org/10.5301/jabfm.500034310.5301/jabfm.5000343 ↗
15. R.V. Pazhamannil, P. Govindan, A. Edacherian, and H.M. Hadidi, Impact of Process Parameters and Heat Treatment on Fused Filament Fabricated PLA and PLA-CF, Int. J. Interact. Des. Manuf., 2022 https://doi.org/10.1007/s12008-022-01082-x10.1007/s12008-022-01082-x ↗
16. U. Punia, R. K. Garg, A. Kaushik, and A. Sharma, Investigation of the Wear Rate of Materials under Different Design Conditions, vol. 9, no. 8, pp. 1831–1837, 2022.
17. A. Ahlawat, R.K. Sahdev, R.K. Gupta, and D. Chhabra, 3D FDM Printable Polymer Composites and Polymer Nanocomposites: State of the Art, J. Nano- Electron. Phys., 2021, 13(2), p 1–4. https://doi.org/10.21272/jnep.13(2).0202010.21272/jnep.13(2).02020 ↗
18. B. Coppola, N. Cappetti, L. Di Maio, P. Scarfato, and L. Incarnato, Layered Silicate Reinforced Polylactic Acid Filaments for 3D Printing of Polymer Nanocomposites, RTSI 2017 - IEEE 3rd Int. Forum Res. Technol. Soc. Ind. Conf. Proc., pp. 3–6, 2017, https://doi.org/10.1109/RTSI.2017.806589210.1109/RTSI.2017.8065892 ↗
19. M. Spoerk, J. Gonzalez-Gutierrez, J. Sapkota, S. Schuschnigg, and C. Holzer, Effect of the Printing Bed Temperature on the Adhesion of Parts Produced by Fused Filament Fabrication, Plast. Rubber Compos., 2018, 47(1), p 17–24. https://doi.org/10.1080/14658011.2017.139953110.1080/14658011.2017.1399531 ↗
20. F. Daver, M. Kajtaz, M. Brandt, and R.A. Shanks, Creep and Recovery Behaviour of Polyolefin-Rubber Nanocomposites Developed for Additive Manufacturing, Polymers (Basel), 2016 https://doi.org/10.3390/polym812043710.3390/polym8120437 ↗
21. H. Blom, R. Yeh, R. Wojnarowski, and M. Ling, Detection of Degradation of ABS Materials via DSC, Thermochim. Acta, 2006, 442(1–2), p 64–66. https://doi.org/10.1016/j.tca.2006.01.01510.1016/j.tca.2006.01.015 ↗
22. D. Chhabra et al., Analysis of Fused Filament Fabrication Parameters for Sliding Wear Performance of Carbon Reinforced Polyamide Composite Material Fabricated Parts using a Hybrid Heuristic Tool, Polym. Test., 2022, 118, p 2023. https://doi.org/10.1016/j.polymertesting.2022.10791010.1016/j.polymertesting.2022.107910 ↗
23. M. J. Richardson et al., Flame Retardant Nylon 6 Nanocomposites for Fused Deposition Modeling (FDM) Applications, Int. SAMPE Tech. Conf., no. May, pp. 230–244, 2017.
24. N.K. Yadav, N.S. Rajput, S. Kulshreshtha, and M.K. Gupta, Investigation of the Mechanical and Wear Properties of Epoxy Resin Composite (ERCs) Made With Nano Particle TiO2 and Cotton Fiber Reinforcement, Evergreen, 2023, 10(1), p 63–77. https://doi.org/10.5109/678104110.5109/6781041 ↗
25. N. Kumar, P.K. Jain, P. Tandon, and P.M. Pandey, Extrusion-Based Additive Manufacturing Process for Producing Flexible Parts, J. Brazilian Soc. Mech. Sci. Eng., 2018, 40(3), p 1–12. https://doi.org/10.1007/s40430-018-1068-x10.1007/s40430-018-1068-x ↗
26. S. Singh, L. Nagdeve, H. Kumar, and K. Dhakar, Rice Straw Based Natural Fiber Reinforced Polymer for Sustainable Bio- Composites: A Systematic Review, Evergreen, 2023, 10(2), p 1041–1052. https://doi.org/10.5109/679366110.5109/6793661 ↗
27. B. Rusdyanto, F. Imaduddin, and D. Ariawan, The Tensile Properties of Recycled Polypropylene Filament (rPP) as 3D Printing Material, Evergreen, 2023 https://doi.org/10.5109/678215210.5109/6782152 ↗
28. D.K. Kolluri et al., Effect of Natural Graphite Particle Size in Friction Materials on Thermal Localisation Phenomenon during Stop-Braking, Wear, 2010, 268(11–12), p 1472–1482. https://doi.org/10.1016/j.wear.2010.02.02410.1016/j.wear.2010.02.024 ↗
29. S.M.R. Kazmi, J. Schuster, and J. Lutz, Exploring the Potential to Uniquely Manufacture Curved VARTM Epoxy Composites Using Cost-Effective FDM Molds, Open J. Compos. Mater., 2020, 10(03), p 45–65. https://doi.org/10.4236/ojcm.2020.10300410.4236/ojcm.2020.103004 ↗
30. R. Singh, R. Kumar, S.M. Pawanpreet, and J. Singh, On Mechanical, Thermal and Morphological Investigations of Almond Skin Powder-Reinforced Polylactic Acid Feedstock Filament, J. Thermoplast. Compos. Mater., 2022, 35(2), p 230–48. https://doi.org/10.1177/089270571988601010.1177/0892705719886010 ↗
31. Y. Gu, Z. Qiu, and K. Mu, Nanographenes and Graphene Nanoribbons as Multitalents of Present and Future Materials Science, J. Am. Chem. Soc., 2022 https://doi.org/10.1021/jacs.2c0249110.1021/jacs.2c02491 ↗
32. A. Raj, L.K. Yadav, J.P. Misra, and V. Upadhyay, Empirical Modeling of Material Removal Rate during the WEDM of Inconel 690, NanoWorld J., 2023, 9(1), p S171–S175. https://doi.org/10.17756/nwj.2023-s1-03510.17756/nwj.2023-s1-035 ↗
33. S.Z. Gebrehiwot, L. Espinosa, L. Paula, and L. Heikki, Optimising the Mechanical Properties of Additive—Manufactured Recycled Polylactic Acid (rPLA) Using Single and Multi—Response Analyses Methods, Int. J. Adv. Manuf. Technol., 2023 https://doi.org/10.1007/s00170-023-12623-310.1007/s00170-023-12623-3 ↗
34. B. Stojanovic, R. Tomović, S. Gajević, J. Petrović, and S. Miladinovic, Tribological Behavior of Aluminum Composites Using Taguchi Design and Ann, Adv. Eng. Lett., 2022, 1(1), p 28–34. https://doi.org/10.46793/adeletters.2022.1.1.510.46793/adeletters.2022.1.1.5 ↗
35. M. Srivastava and S. Rathee, Optimisation of FDM Process Parameters by Taguchi Method for Imparting Customised Properties to Components, Virtual Phys. Prototyp., 2018, 13(3), p 203–210. https://doi.org/10.1080/17452759.2018.144072210.1080/17452759.2018.1440722 ↗
36. S. Gajević, A. Marković, S. Milojević, A. Ašonja, L. Ivanović, and B. Stojanović, Multi-Objective Optimization of Tribological Characteristics for Aluminum Composite Using Taguchi Grey and TOPSIS Approaches, Lubricants, 2024 https://doi.org/10.3390/lubricants1205017110.3390/lubricants12050171 ↗
37. V. Francis and P.K. Jain, Surface Enhancement Approach for FDM Rapid Prototypes by Organically Modified Montmorillonite Nanoparticles, IOP Conf. Ser. Mater. Sci. Eng., 2018 https://doi.org/10.1088/1757-899X/383/1/01201010.1088/1757-899X/383/1/012010 ↗
38. V. Francis, A. Dubey, Application of Taguchi and Response Surface Methodologies for\nSurface Roughness in Face Milling Operation, Int. J. Mech. Prod. Eng. Res. Dev., vol. 3, no. 2, pp. 213–220, 2013, [Online]. Available: http://www.tjprc.org/view_archives.php?year=2013&jtype=2&id=67&details=archives.
39. A. Raj, J.P. Misra, R.P. Singh, G. Singh, S. Sharma, and S.M. Eldin, Performance Analysis of WEDM during the Machining of Inconel 690 Miniature Gear using RSM and ANN Modeling Approaches, Rev. Adv. Mater. Sci., 2023, 62(1), p 20220288. https://doi.org/10.1515/rams-2022-028810.1515/rams-2022-0288 ↗