Microstructure and Cavitation Erosion Performance of Cold-Sprayed WC-12Co and WC-17Co Coatings on Hydraulic Turbine Steels
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Coal Combustion and Slurry Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. R. Singh, S.K. Tiwari and S.K. Mishra, Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs, J. Mater. Eng. Perform., 2012, 21, p 1539–1551.10.1007/s11665-011-0051-9 ↗
2. R. Jasionowski, D. Zasada and W. Przetakiewicz, Cavitation Erosion Resistance of Alloys Used in Cathodic Protection of Hulls of Ships, Arch. Metall. Mater., 2014, 59, p 241–245.10.2478/amm-2014-0039 ↗
3. J.H. Kim, H.S. Yang, K.H. Baik, B.G. Seong, C.H. Lee and S.Y. Hwang, Development and Properties of Nanostructured Thermal Spray Coatings, Curr. Appl. Phys., 2006, 6, p 1002–1006.10.1016/j.cap.2005.07.006 ↗
4. H. Singh, T.S. Sidhu and S.B.S. Kalsi, Cold Spraying Technology: Future of Coating Deposition Processes, Frat. Ed. IntegritaStrutt., 2012, 22, p 69–84.10.3221/IGF-ESIS.22.08 ↗
5. J. Karthikeyan, C.M. Kay, J. Lindeman, R.S. Lima and C.C. Berndt, Cold spray processing of titanium powder, Thermal Spray: Surface Engineering via Applied Research. C.C. Berndt Ed., ASM International, USA, 2000, p 255–262
6. H. Singh, M. Kumar and R. Singh, An Overview of Various Applications of Cold Spray Coating Process, Mater. Today Proceed., 2022, 56, p 2826–2830. https://doi.org/10.1016/j.matpr.2021.10.16010.1016/j.matpr.2021.10.160 ↗
7. S. Kumar, Influence of Processing Conditions on the Mechanical, Tribological and Fatigue Performance of Cold Spray Coating: A Review, Surf. Eng., 2022, 38(4), p 324–365. https://doi.org/10.1080/02670844.2022.207342410.1080/02670844.2022.2073424 ↗
8. S. Kumar, M. Kumar and N. Jindal, Overview of Cold Spray Coatings Applications and Comparisons: A Critical Review, World J. Eng., 2020, 17(1), p 27–51. https://doi.org/10.1108/wje-01-2019-002110.1108/wje-01-2019-0021 ↗
9. M. Kumar, S. Kant and S. Kumar, Corrosion Behaviour of Wire Arc Sprayed Ni-based Coatings in an Extreme Environment, Mater. Res. Express, 2019, 6(10), 106427. https://doi.org/10.1088/2053-1591/ab3bd810.1088/2053-1591/ab3bd8 ↗
10. T.S. Bedi, S. Kumar and R. Kumar, Corrosion Performance of Hydroxyapatite and Hydroxyapatite/titania Bond Coating for Biomedical Applications, Mater. Res. Express, 2019, 7(1), 015402. https://doi.org/10.1088/2053-1591/ab5cc510.1088/2053-1591/ab5cc5 ↗
11. S. Hochstrasser-Kurz, Y. Mueller, C. Latkoczy, S. Virtanen and P. Schmutz, Analytical Characterization of the Corrosion Mechanisms of WC–Co by Electrochemical Methods and Inductively Coupled Plasma Mass Spectroscopy, Corros. Sci., 2007 https://doi.org/10.1016/j.corsci.2006.08.02210.1016/j.corsci.2006.08.022 ↗
12. M. Couto, S. Dosta, M. Torrell, J. Fernández and J.M. Guilemany, Cold Spray Deposition of WC-17 and 12Co Cermets Onto Aluminum, Surf. Coatings Technol., 2013, 235, p 54–61. https://doi.org/10.1016/j.surfcoat.2013.07.01110.1016/j.surfcoat.2013.07.011 ↗
13. W. Tillmann, I. Baumann, P.S. Hollingsworth and L. Hagen, Sliding and Rolling Wear Behaviour of HVOF-Sprayed Coatings Derived from Conventional, Fine and Nanostructured WC-12Co Powders, J. Therm. Spray Technol., 2014, 23, p 262–280.10.1007/s11666-013-0038-1 ↗
14. S. Krebs, F. Grtner and T. Klassen, Cold spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments, J. Therm. Spray Technol., 2015 https://doi.org/10.1007/s11666-014-0161-710.1007/s11666-014-0161-7 ↗
15. Y. Wang, J. Liu, N. Kang, G. Darut, T. Poirier, J. Stella, H. Liao and M.H. Planche, Cavitation Erosion of Plasma-Sprayed CoMoCrSi Coatings, Tribol. Int., 2016, 102, p 429–435.10.1016/j.triboint.2016.06.014 ↗
16. M. Couto, S. Dosta, J. Fernandez and J.M. Guilemany, Comparison of the Mechanical and Electrochemical Properties of WC-25Co Coatings Obtained by High Velocity Oxy-fuel and Cold Gas Spraying, J. Therm. Spray Technol., 2014, 23(8), p 1251–1258. https://doi.org/10.1007/s11666-014-0123-010.1007/s11666-014-0123-0 ↗
17. D.A. Stewart, P.H. Shipway and D.G. McCartney, Abrasive Wear Behaviour of Conventional and Nanocomposite HVOF-Sprayed WC–Co Coatings, Wear, 1999, 225, p 789–798.10.1016/S0043-1648(99)00032-0 ↗
18. M. Guilemany, S. Dosta and J.R. Miguel, The Enhancement of the Properties of WC-Co HVOF Coatings Through the Use of Nanostructured and Microstructured Feedstock Powders, Surf. Coat. Technol., 2006, 201, p 1180–1190.10.1016/j.surfcoat.2006.01.041 ↗
19. M. Watanabe, A. Owada, S. Kuroda and Y. Gotoh, Effect of WC size on Interface Fracture Toughness of WC–Co HVOF Sprayed Coatings, Surf. Coat. Technol., 2006, 201, p 619–627.10.1016/j.surfcoat.2005.12.019 ↗
20. N. Ma, L. Guo, Z. Cheng, H. Wu, F. Ye and K. Zhang, Improvement on Mechanical Properties and Wear Resistance of HVOF Sprayed WC-12Co Coatings by Optimizing Feedstock Structure, Appl. Surf. Sci., 2014, 320, p 364–371.10.1016/j.apsusc.2014.09.081 ↗
21. M.M. Lima, C. Godoy, P.J. Modenesi, J.C. Avelar-Batista, A. Davison and A. Matthews, Coating Fracture Toughness Determined by Vickers Indentation: An Important Parameter in Cavitation Erosion Resistance of WC–Co Thermally Sprayed Coatings, Surf. Coat. Technol., 2004, 177–178, p 489–496. https://doi.org/10.1016/S0257-8972(03)00917-410.1016/S0257-8972(03)00917-4 ↗
22. A.J. López and J. Rams, Protection of Carbon Steel Against Molten Aluminum Attack and High Temperature Corrosion Using High Velocity Oxygen-Fuel WC–Co Coatings, Surf. Coat. Tech., 2015, 262, p 123–133. https://doi.org/10.1016/j.surfcoat.2014.12.02310.1016/j.surfcoat.2014.12.023 ↗
23. A.S. Praveen, J. Sarangan, S. Suresh and B.H. Channabasappa, Optimization and Erosion Wear Response of NiCrSiB/WC–Co HVOF Coating Using Taguchi Method, Ceram. Int., 2016, 42, p 1094–1104.10.1016/j.ceramint.2015.09.036 ↗
24. J. Yuan, C. Ma, S. Yang, Z. Yu and H. Li, Improving the Wear Resistance of HVOF Sprayed WC-Co Coatings by Adding Submicron-Sized WC Particles at the Splats’ Interfaces, Surf. Coat. Tech., 2016, 285, p 17–23. https://doi.org/10.1016/j.surfcoat.2015.11.01710.1016/j.surfcoat.2015.11.017 ↗
25. Z. Geng, S. Hou, G. Shi, D. Duan and S. Li, Tribological Behaviour at Various Temperatures of WC-Co Coatings Prepared Using Different Thermal Spraying Techniques, Tribol. Int., 2016, 104, p 36–44. https://doi.org/10.1016/j.triboint.2016.08.02510.1016/j.triboint.2016.08.025 ↗
26. S. Dosta, M. Couto and J.M. Guilemany, Cold Spray Deposition of a WC-25Co Cermet Onto Al7075-T6 and Carbon Steel Substrates, Acta. Mater., 2013, 61, p 643–652. https://doi.org/10.1016/j.actamat.2012.10.01110.1016/j.actamat.2012.10.011 ↗
27. M. Couto, S. Dosta and J.M. Guilemany, Comparison of the Mechanical and Electrochemical Properties of WC-17 and 12Co Coatings onto Al7075-T6 Obtained by High Velocity Oxy-fuel and Cold Gas Spraying, Surf. Coatings Technol., 2014, 268, p 180–189. https://doi.org/10.1016/j.surfcoat.2014.04.03410.1016/j.surfcoat.2014.04.034 ↗
28. L.-M. Berger, Hardmetals as Thermal Spray Coatings, Powder Metall., 2007, 50, p 205–214. https://doi.org/10.1179/174329007X24607810.1179/174329007X246078 ↗
29. V. K. Champagne, The cold spray materials deposition process Fundamentals and applications, 2007, (ISBN: 9781845693787).10.1201/9781439824122 ↗
30. B.H. Kear, R.K. Sadangi, M. Jain, R. Yao, Z. Kalman, G. Skandan and W.E. Mayo, Thermal Sprayed Nanostructured WC/Co Hardcoatings, J. Therm. Spray Technol., 2000, 9, p 399–406. https://doi.org/10.1361/10599630077034986310.1361/105996300770349863 ↗
31. J.M. Guilemany, S. Dosta, J. Nin and J.R. Miguel, Study of the Properties of WC-Co Nanostructured Coatings Sprayed by High-Velocity Oxyfuel, J. Therm. Spray Technol., 2005, 14, p 405–413. https://doi.org/10.1361/105996305X5935010.1361/105996305X59350 ↗
32. J.M. Guilemany, S. Dosta and J.R. Miguel, The Enhancement of the Properties of WCCoHVOF Coatings Through the use of Nanostructured and Microstructured Feedstock Powders, Surf. Coat. Tech., 2006, 201, p 1180–1190. https://doi.org/10.1016/j.surfcoat.2006.01.04110.1016/j.surfcoat.2006.01.041 ↗
33. H.J. Kim, C.H. Lee and S.Y. Hwang, Fabrication of WC–Co Coatings by Cold Spray Deposition, Surf. Coat. Technol., 2005, 191(2–3), p 335–340. https://doi.org/10.1016/j.surfcoat.2004.04.05810.1016/j.surfcoat.2004.04.058 ↗
34. H.J. Kim, C.H. Lee and S.Y. Hwang, Fabrication of WC-Co Coatings by Cold Spray Deposition, Surf. Coat. Technol., 2005, 191, p 335–340. https://doi.org/10.1016/j.surfcoat.2004.04.05810.1016/j.surfcoat.2004.04.058 ↗
35. G.C. Ji, H.T. Wang, X. Chen, X.B. Bai, Z.X. Dong and F.G. Yang, Characterization of Cold-Sprayed Multimodal WC-12Co Coating, Surf. Coat. Tech., 2013, 235, p 536–543.10.1016/j.surfcoat.2013.08.021 ↗
36. H. Singh, M. Kumar and R. Singh, Slurry Erosion Performance of Cold Sprayed WC-12Co Composite Coatings, Surf. Rev. Lett., 2024 https://doi.org/10.1142/S0218625X2450050110.1142/S0218625X24500501 ↗
37. S. Kumar, et al., Gas Dynamic Cold Spraying: A Review on Materials, Parameters, Applications and Challenges, I-manager’s J. Future Eng. Technol., 2020, 16(2), 43–56. https://doi.org/10.26634/jfet.16.2.1762410.26634/jfet.16.2.17624 ↗
38. H. Singh, Experimental Investigation of WC-12Co Cold Sprayed: Substrate Hardness, Bonding Mechanism, Powder Type, Mater. Today Proceed., 2023 https://doi.org/10.1016/j.matpr.2023.01.34810.1016/j.matpr.2023.01.348 ↗
39. H. Singh, M. Kumar, R. Singh and S. Kumar, Deposition Behaviour of WC-17Co Cold-Sprayed Composite Coating on Hydro Turbine Steels, Surf. Rev. Lett., 2024 https://doi.org/10.1142/S0218625X2550020910.1142/S0218625X25500209 ↗
40. S. Kumar, Comprehensive Review on High Entropy Alloy-Based Coating, Surf. Coat. Technol., 2024, 477, 130327. https://doi.org/10.1016/j.surfcoat.2023.13032710.1016/j.surfcoat.2023.130327 ↗
41. H. Singh, M. Kumar and R. Singh, Microstructural and Mechanical Characterization of a Cold-Sprayed WC-12Co Composite Coating on Stainless Steel Hydroturbine Blades, J. Therm. Spray. Tech., 2023, 32, p 970–983. https://doi.org/10.1007/s11666-022-01497-810.1007/s11666-022-01497-8 ↗
42. H. Singh, M. Kumar and R. Singh, Development of High Pressure Cold Spray Coatings of Tungsten Carbide Composites, Mater. Today Proceed., 2023 https://doi.org/10.1016/j.matpr.2022.12.21010.1016/j.matpr.2022.12.210 ↗