Comparison of Wear Behavior of Basic Oxygen Furnace Slag and WC-CoCr Coating
Source abstract
Abstract
Metallurgical slags can be re-evaluated depending on their structural properties for reuse in many industrial applications. This study investigated the possibility of reusing these slags as a commercial value.The results of benchmark research comparing the friction and wear behavior of basic oxygen furnace slag (BOFS) and commercial wear-resistant coating against an Al2O3 counter body under dry conditions are presented in this work. Reciprocating wear tests were carried out on WC-CoCr, and slag coatings were deposited on 316L stainless steel substrates under different loads and sliding speeds. The wear track surfaces were compared using a scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and a 3D optical profilometer for wear-depth and wear-loss measurements. As a result of the experimental studies carried out, it was observed that BOFS coatings exhibited an appealingly superior wear performance. The study results showed that coatings with BOFS content could be used as an alternative candidate coating material equivalent to the wear-resistant coatings used in commercial and industrial areas in terms of performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Materials Engineering and Processing · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A.R. Govande, A. Chandak, B.R. Sunil, and R. Dumpala, Carbide-Based Thermal Spray Coatings: A Review on Performance Characteristics and Post-Treatment, Int. J. Refract. Met. Hard Mater., 2022, 103, 105772. https://doi.org/10.1016/j.ijrmhm.2021.10577210.1016/j.ijrmhm.2021.105772 ↗
2. A.S.M. Ang, C.C. Berndt, and P. Cheang, Deposition Effects of WC Particle Size on Cold Sprayed WC-Co Coatings, Surf. Coat. Technol., 2011, 205, p 3260–3267. https://doi.org/10.1016/j.surfcoat.2010.11.04510.1016/j.surfcoat.2010.11.045 ↗
3. C.J. Li, X.T. Luo, S.W. Yao, G.R. Li, C.X. Li, and G.J. Yang, The Bonding Formation during Thermal Spraying of Ceramic Coatings: A Review, J. Therm. Spray. Tech., 2022, 31, p 780–817. https://doi.org/10.1007/s11666-022-01379-z10.1007/s11666-022-01379-z ↗
4. K. Sunitha and H. Vasudev, A Short Note on the Various Thermal Spray coating Processes and Effect of Post-Treatment on Ni-Based Coatings, Mater. Today Proc., 2022, 50, p 1452–1457. https://doi.org/10.1016/j.matpr.2021.09.01710.1016/j.matpr.2021.09.017 ↗
5. K. Derelizade, A. Rincon, F. Venturi, R.G. Wellman, A. Kholobystov, and T. Hussain, High Temperature (900 °C) Sliding Wear of CrNiAlCY Coatings Deposited by High Velocity Oxy Fuel Thermal Spray, Surf. Coat. Technol., 2022, 432, 128063. https://doi.org/10.1016/j.surfcoat.2021.12806310.1016/j.surfcoat.2021.128063 ↗
6. G. Prashar and H. Vasudev, A Review on the Influence of Process Parameters and Heat Treatment on the Corrosion Performance of Ni-Based Thermal Spray Coatings, Surf. Rev. Lett., 2022, 29, p 2230001. https://doi.org/10.1142/S0218625X2230001510.1142/S0218625X22300015 ↗
7. P. Jayashree, S. Turani, and G. Straffelini, Effect of Velocity and Temperature on the Dry Sliding Behavior of a SiC-Graphite Composite Against WC-CoCr and WC-FeCrAlY HVOF Coatings, Wear, 2021, 464, 203553. https://doi.org/10.1016/j.wear.2020.20355310.1016/j.wear.2020.203553 ↗
8. M. Magnani, P.H. Suegama, A.A.C. Recco, J.M. Guilemany, C.S. Fugivara, and A.V. Benedetti, WC-CoCr Coatings Sprayed by high Velocity Oxygen-Fuel (HVOF) Flame on AA7050 Aluminum Alloy: Electrochemical Behavior in 3.5% NaCl Solution, Mater. Res., 2007, 10, p 377–385. https://doi.org/10.1590/S1516-1439200700040001010.1590/S1516-14392007000400010 ↗
9. L. Thakur, N. Arora, R. Jayaganthan, and R. Sood, An Investigation on Erosion Behavior of HVOF Sprayed WC-CoCr Coatings, Appl. Surf. Sci., 2011, 258, p 1225–1234. https://doi.org/10.1016/j.apsusc.2011.09.07910.1016/j.apsusc.2011.09.079 ↗
10. G. Bolelli, L. Lusvarghi, and M. Barletta, HVOF-Sprayed WC-CoCr Coatings on Al Alloy: Effect of the Coating Thickness on the Tribological Properties, Wear, 2009, 267, p 944–953. https://doi.org/10.1016/j.wear.2008.12.06610.1016/j.wear.2008.12.066 ↗
11. M. Barletta, G. Bolelli, B. Bonferroni, and L. Lusvarghi, Wear and Corrosion Behavior of HVOF-Sprayed WC-CoCr Coatings on Al Alloys, J. Therm. Spray. Tech., 2010, 19, p 358–367. https://doi.org/10.1007/s11666-009-9387-110.1007/s11666-009-9387-1 ↗
12. J.A. Picas, E. Rupérez, M. Punset, and A. Forn, Influence of HVOF Spraying Parameters on the Corrosion Resistance of WC-CoCr Coatings in Strong Acidic Environment, Surf. Coat. Technol., 2013, 225, p 47–57. https://doi.org/10.1016/j.surfcoat.2013.03.01510.1016/j.surfcoat.2013.03.015 ↗
13. T.S. Naidu, C.M. Sheridan, and L.D. van Dyk, Basic Oxygen Furnace Slag: Review of Current and Potential Uses, Minerals Eng., 2020, 149, 106234. https://doi.org/10.1016/j.mineng.2020.10623410.1016/j.mineng.2020.106234 ↗
14. C. Kambole, P. Paige-Green, W.K. Kupolati, J.M. Ndambuki, and A.O. Adeboje, Basic Oxygen Furnace Slag for Road Pavements: A Review of Material Characteristics and Performance for Effective Utilization in Southern Africa, Constr. Build. Mater., 2017, 148, p 618–631. https://doi.org/10.1016/j.conbuildmat.2017.05.03610.1016/j.conbuildmat.2017.05.036 ↗
15. Y. Xue, H. Hou, and S. Zhu, Characteristics and Mechanisms of Phosphate Adsorption Onto Basic Oxygen Furnace Slag, J. Hazardous Mater., 2009, 162, p 973–980. https://doi.org/10.1016/j.jhazmat.2008.05.13110.1016/j.jhazmat.2008.05.131 ↗
16. H. Kumar, G.A. Bhaduri, S.G.K. Manikandan, M. Kamaraj, and S. Shiva, Microstructural Characterization and Tribological Properties of Atmospheric Plasma Sprayed High Entropy Alloy Coatings, J. Therm. Spray. Tech., 2022, 31, p 1956–1974. https://doi.org/10.1007/s11666-022-01422-z10.1007/s11666-022-01422-z ↗
17. Q. Ding, X. Tan, L. Jiang, X. Fan, B. He, C. Wang, X. Zhuo, K. Zhou, and X. Zhang, High-Temperature Performances of Si-HfO2-Based Environmental Barrier Coatings via Atmospheric Plasma Spraying Ceram, Int., 2022, 48, p 23127–23136. https://doi.org/10.1016/j.ceramint.2022.04.29310.1016/j.ceramint.2022.04.293 ↗
18. H. Wang, X. Wang, X. Song, X. Liu, and X. Liu, Sliding wear Behavior of Nanostructured WC-Co-Cr Coatings, Appl. Surf. Sci., 2015, 355, p 453–460. https://doi.org/10.1016/j.apsusc.2015.07.14410.1016/j.apsusc.2015.07.144 ↗
19. S. Hong et al., Improvement in Tribological Properties of Cr12MoV Cold Work die Steel by HVOF Sprayed WC-CoCr Cermet Coatings, Coatings, 2019, 9(12), p 825.10.3390/coatings9120825 ↗
20. L. Wu et al., Reciprocating Friction and Wear Behavior of Ti3AlC2 and Ti3AlC2/Al2O3 Composites Against AISI52100 Bearing Steel, Wear, 2009, 266(1–2), p 158–166.10.1016/j.wear.2008.06.009 ↗
21. S.R. Medabalimi, M. Ramesh, and R. Kadoli, Developing Partially Oxidized NiCr Coatings Using the Combined Flame Spray and Plasma Spray Process for Improved Wear Behaviour at High Temperature, Wear, 2021, 478, 203885.10.1016/j.wear.2021.203885 ↗
22. K. Torkashvand, V.K. Selpol, M. Gupta, and S. Joshi, Influence of Test Conditions on Sliding Wear Performance of High Velocity Air fuel-Sprayed WC-CoCr Coatings, Materials, 2021, 14(11), p 3074.10.3390/ma14113074 ↗
23. F. Hayat and C.T. Sezgin, Wear Behavior of Borided Cold-Rolled High Manganese Steel, Coatings, 2021, 11(10), p 1207.10.3390/coatings11101207 ↗
24. A. Günen, Tribocorrosion Behavior of Boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 High Entropy Alloy, Surf. Coat. Technol., 2021, 421, p 127426.10.1016/j.surfcoat.2021.127426 ↗
25. M. Kilic, D. Ozkan, M.S. Gok, and A.C. Karaoglanli, Room-and High Temperature Wear Resistance of MCrAlY Coatings Deposited by Detonation gun (D-gun) and Supersonic Plasma Spraying (SSPS) Techniques, Coatings, 2020, 10(11), p 1107.10.3390/coatings10111107 ↗
26. G. Bolelli, L.M. Berger, M. Bonetti and L. Lusvarghi, Comparative Study of the Dry Sliding Wear Behaviour of HVOF-Sprayed WC-(W, Cr) 2C-Ni and WC-CoCr Hardmetal Coatings, Wear, 2014, 309(1–2), p 96–111.10.1016/j.wear.2013.11.001 ↗
27. F. Çavdar, A. Günen, E. Kanca, Y. Er, M.S. Gök, M. Ivan Campos-Silva, and M. IOlivares-Luna, An Experimental and Statistical Analysis on Dry Sliding Wear Failure Behavior of Incoloy 825 at Elevated Temperatures, J. Mater. Eng. Perform., 2022, 32(9), p 4161–4184. https://doi.org/10.1007/s11665-022-07381-410.1007/s11665-022-07381-4 ↗
28. Z. Juanjuan, M. Le, and R. Dwyer-Joyce, Friction and Wear Behaviors of Self-Lubricating Peek Composites for Articulating Pin Joints, Tribol. Int., 2020, 149, 105741. https://doi.org/10.1016/j.triboint.2019.04.02510.1016/j.triboint.2019.04.025 ↗
29. S. Das, S.V. Prasad, and T.R. Ramachandran, Microstructure and Wear of Cast (Al-Si alloy)-Graphite Composites, Wear, 1989, 133, p 173–187. https://doi.org/10.1016/0043-1648(89)90122-110.1016/0043-1648(89)90122-1 ↗
30. T.R. Prabhu, V.K. Varma, and S. Vedantam, Effect of SiC Volume Fraction and Size on Dry Sliding Wear of Fe/SiC/graphite Hybrid Composites for High Sliding Speed Applications, Wear, 2014, 309, p 1–10. https://doi.org/10.1016/j.wear.2013.10.00610.1016/j.wear.2013.10.006 ↗
31. B. Venkataraman and G. Sundararajan, Correlation Between the Characteristics of the Mechanically Mixed Layer and Wear Behaviour of Aluminum, Al-7075 Alloy and Al-MMCs, Wear, 2000, 245, p 22–38. https://doi.org/10.1016/S0043-1648(00)00463-410.1016/S0043-1648(00)00463-4 ↗
32. S. Hong, Y. Wu, B. Wang, and J. Lin, Improvement in Tribological Properties of Cr12MoV Cold Work Die Steel by HVOF Sprayed WC-CoCr Cermet Coatings, Coatings, 2019, 9, p 825. https://doi.org/10.3390/coatings912082510.3390/coatings9120825 ↗
33. A. Mateen, G.C. Saha, T.I. Khan, and F.A. Khalid, Tribological Behaviour of HVOF Sprayed Near-Nanostructured and Microstructured WC-17 wt.% Co Coatings, Surf. Coat. Technol., 2011, 206, p 1077–1084. https://doi.org/10.1016/j.surfcoat.2011.07.07510.1016/j.surfcoat.2011.07.075 ↗
34. R. Kumar, K. Goyal, and D. Bhandari, Slurry Erosion Behavior of Thermally Sprayed Nano YSZ Reinforced WC-10Co-4Cr Ceramic Nanocomposite Coatings, Tribol. Trans., 2023, 66(1), p 47–58.10.1080/10402004.2022.2137446 ↗
35. R. Kumar, D. Bhandari, and K. Goyal, Mechanical and Microstructural Characterization of Yttria-Stabilized Zirconia (Y2O3/ZrO2; YSZ) Nanoparticles Reinforced WC-10Co-4Cr Coated Turbine Steel, J. Electrochem. Sci. Eng., 2022, 12(4), p 651–666.
36. Y. Ozgurluk, Evaluation of Hot Corrosion Behavior of WC-Co-Cr Coatings Coated by the HVOF Method, J. Mater. Mechatron. A, 2023, 4(1), p 286–301.10.55546/jmm.1287543 ↗