journal article·2024-05

The Superelastic Stability of Nanocrystalline Ni-51 At.% Ti Shape Memory Alloy

Taotao Wang, Fangmin Guo, Yapeng Li, Junjie Ye

Publisher page

Abstract

NiTi shape memory alloys have been extensively studied owing to its superelasticity. However, the application of coarse-grained NiTi alloys is limited due to their low superelastic stress and poor superelastic stability after cyclic deformation, which mainly because of their low yield strength. In this study, large deformation cold-drawing and low-temperature annealing were used to obtain nanocrystalline (NC) Ni51Ti49 (at.%) wire specimen (average grain size ~ 14 nm). After twenty cycles of loading (up to 6%)–unloading, the Ni51Ti49 alloy has a superelastic stress of 1051 MPa, a residual strain of 0.66% and a superelastic stress reduction rate of 9%, which is obviously superior to NC NiTi with the same grain size, as well as previous coarse-grained NiTi alloys. We have suggested that this mainly stems from the NiTi matrix that was considerably improved by the synergistic enhancement of high-density grain boundaries and doped Ni atoms in NC Ni51Ti49 SMAs, reducing plastic deformation and showing high superelastic stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. T. Alonso, D. Favier, and G. Chagnon, Characterizing Transformation Phenomena and Elastic Moduli of Austenite and Oriented Martensite of Superelastic Thin NiTi Wire through Isothermal Dynamic Mechanical Analysis, J. Mater. Eng. Perform., 2019, 28, p 4667–4679.10.1007/s11665-019-04225-6 ↗
2. J. Apell, M. Rettenmayr, and A. Undisz, Evaluation Methods for Non-contact Bend and Free Recovery Tests of Thin NiTi Wires and Their Effects on Measured Transformation Temperatures, J. Mater. Eng. Perform., 2020, 29, p 5435–5441.10.1007/s11665-020-05022-2 ↗
3. D.M. Norfleet, P.M. Sarosi, S. Manchiraju, M.F.X. Wagner, M.D. Uchic, P.M. Anderson, and M.J. Mills, Transformation-Induced Plasticity During Pseudoelastic Deformation in Ni–Ti Microcrystals, Acta Mater., 2009, 57, p 3549–3561.10.1016/j.actamat.2009.04.009 ↗
4. W.-N. Hsu, E. Polatidis, M. Šmíd, S. Van Petegem, N. Casati, and H. Van Swygenhoven, Deformation and Degradation of Superelastic NiTi Under Multiaxial Loading, Acta Mater., 2019, 167, p 149–158.10.1016/j.actamat.2019.01.047 ↗
5. W.-S. Ko, W.S. Choi, G. Xu, P.-P. Choi, Y. Ikeda, and B. Grabowski, Dissecting Functional Degradation in NiTi Shape Memory Alloys Containing Amorphous Regions Via Atomistic Simulations, Acta Mater, 2012, 202, p 331–349.10.1016/j.actamat.2020.10.070 ↗
6. L. Xia, Q. Wu, K. Zhou, B. Han, F. He, and Z. Wang, Concurrent Recrystallization and Precipitation for Combination of Superior Precipitation and Grain Boundary Hardening in Co37Cr20Ni37Ti3Al3 High-Entropy Alloy, Methods Mater. Int, 2022, 28, p 2863–2873.10.1007/s12540-022-01178-9 ↗
7. Y. Fan, X. Tang, S. Wang, and B. Chen, Comparisons of Age Hardening and Precipitation Behavior in 7075 Alloy Under Single and Double-Stage Aging Treatments, Methods Mater. Int., 2021, 27, p 4204–4215.10.1007/s12540-020-00875-7 ↗
8. X. Wang, Z. Pu, Q. Yang, S. Huang, Z. Wang, S. Kustov, and J. Van Humbeeck, Improved Functional Stability of a Coarse-Grained Ti-50.8 at.% Ni Shape Memory Alloy Achieved by Precipitation on Dislocation Networks, Scripta Mater., 2019, 163, p 57–61.10.1016/j.scriptamat.2019.01.006 ↗
9. X. Li, H. Chen, W. Guo, Y. Guan, Z. Wang, Q. Zeng, and X. Wang, Improved Superelastic Stability of NiTi Shape Memory Alloys Through Surface Nano-crysTallization Followed by Low Temperature Aging Treatment, Intermetallics, 2021, 131, p 107114.10.1016/j.intermet.2021.107114 ↗
10. X. Wang, S. Kustov, K. Li, D. Schryvers, B. Verlinden, and J. Van Humbeeck, Effect of Nanoprecipitates on the Transformation Behavior and Functional Properties of a Ti-50.8 at.% Ni Alloy with Micron-Sized Grains, Acta Mater., 2015, 82, p 224–233.10.1016/j.actamat.2014.09.018 ↗
11. M. Kato, Hall-Petch Relationship and Dislocation Model for Deformation of Ultrafine-Grained and Nanocrystalline Metals, Mater. Trans., 2014, 55, p 19–24.10.2320/matertrans.MA201310 ↗
12. C.S. Pande and K.P. Cooper, Nanomechanics of Hall-Petch Relationship in Nanocrystalline Materials, Prog. Mater. Sci., 2009, 54, p 689–706.10.1016/j.pmatsci.2009.03.008 ↗
13. Y. Chen, O. Tyc, O. Molnárová, L. Heller, and P. Šittner, Tensile Deformation of Superelastic NiTi Wires in Wide Temperature and Microstructure Ranges, Shap Mem Superelasticity, 2018, 5, p 42–62.10.1007/s40830-018-00205-2 ↗
14. R. Delville, B. Malard, J. Pilch, P. Sittner, and D. Schryvers, Microstructure Changes During Non-Conventional Heat Treatment of Thin Ni-Ti Wires by Pulsed Electric Current Studied by Transmission Electron Microscopy, Acta Mater., 2010, 58, p 4503–4515.10.1016/j.actamat.2010.04.046 ↗
15. S. Mao, M.H. Wu, Z. Zhang, F. Hao, D. Liu, Y. Zhang, and B. Hou, Effect of Cyclic Loading on Apparent Young’s Modulus and Critical Stress in Nano-Subgrained Superelastic NiTi Shape Memory Alloys, Mater. Trans., 2006, 47, p 735–741.10.2320/matertrans.47.735 ↗
16. V. Brailovski, S. Prokoshkin, K. Inaekyan, and V. Demers, Functional Properties of Nanocrystalline, Submicrocrystalline and Polygonized Ti-Ni Alloys Processed by Cold Rolling and Post-Deformation Annealing, J. Alloys Compd., 2011, 509, p 2062075.10.1016/j.jallcom.2010.10.142 ↗
17. J. Zhang, D. Xue, X. Cai, X. Ding, X. Ren, and J. Sun, Dislocation Induced Strain Glass in Ti50Ni45Fe5 Alloy, Acta Mater., 2016, 120, p 130–137.10.1016/j.actamat.2016.08.015 ↗
18. D. Jiang, J. An, Y. Liu, Z. Ma, F. Liu, H. Yang, X. Ren, K. Yu, J. Zhang, X. Jiang, Y. Ren, and L. Cui, Nanocrystalline Strain Glass TiNiPt and Its Superelastic Behavior, Phys. Rev. B, 2021, 104, p 024102.10.1103/PhysRevB.104.024102 ↗
19. T. Wang, Z. Ma, X. Rao, D. Jiang, Y. Ren, Y. Liu, K.Y. Yu, and L. Cui, Temperature-Dependence of Superelastic Stress in Nanocrystalline NiTi with Complete Transformation Capability, Intermetallics, 2020, 127, p 106970.10.1016/j.intermet.2020.106970 ↗
20. B. Yan, S. Jiang, D. Sun, J. Yu, and Y. Zhang, Comparison for Grain Growth Dynamics of Severely Deformed Austenite and Martensite NiTi Shape Memory Alloys after Complete Crystallization of Amorphous Phase, J. Mater. Eng. Perform, 2021, 30, p 6191.10.1007/s11665-021-05818-w ↗
21. E. Sharifi, A. Kermanpur, F. Karimzadeh, and A. Esmaili, Formation of the Nanocrystalline Structure in an Equiatomic NiTi Shape-Memory Alloy by Thermomechanical Processing, J. Mater. Eng. Perform., 2014, 23, p 1408–1414.10.1007/s11665-013-0856-9 ↗
22. J.Y. Huang, Y.T. Zhu, X.Z. Liao, and R.Z. Valiev, Amorphization of TiNi Induced by High-Pressure Torsion, Philos. Mag. Lett., 2004, 84, p 183–190.10.1080/09500830310001657353 ↗
23. J. Koike, D.M. Parkin, and M. Nastasi, Crystal-to-Amorphous Transformation of NiTi Induced by Cold Rolling, J. Mater. Res., 1990, 5, p 1414–1418.10.1557/JMR.1990.1414 ↗
24. P. Sittner, Y. Liu, and V. Novak, On the Origin of Lüders-Like Deformation of NiTi Shape Memory Alloys, J. Mech. Phys. Solids, 2005, 53, p 1719–1746.10.1016/j.jmps.2005.03.005 ↗
25. P. Sedmák, P. Šittner, J. Pilch, and C. Curfs, Instability of Cyclic Superelastic Deformation of NiTi Investigated by Synchrotron X-ray Diffraction, Acta Mater., 2015, 94, p 257–270.10.1016/j.actamat.2015.04.039 ↗
26. J. Frenzel, E.P. George, A. Dlouhy, C. Somsen, M.F.X. Wagner, and G. Eggeler, Influence of Ni on martensitic phase transformations in NiTi shape memory alloys, Acta Mater., 2010, 58, p 3444–3458.10.1016/j.actamat.2010.02.019 ↗
27. J. Frenzel, A. Wieczorek, I. Opahle, B. Maaß, R. Drautz, and G. Eggeler, On the Effect of Alloy Composition on Martensite Start Temperatures and Latent Heats in Ni–Ti-Based Shape Memory Alloys, Acta Mater., 2015, 90, p 213–231.10.1016/j.actamat.2015.02.029 ↗
28. Y. Yang, D. Xue, R. Yuan, Y. Zhou, T. Lookman, X. Ding, X. Ren, and J. Sun, Doping Effects of Point Defects in Shape Memory Alloys, Acta Mater., 2019, 176, p 177–188.10.1016/j.actamat.2019.06.031 ↗
29. S. Sarkar, X. Ren, and K. Otsuka, Evidence for Strain Glass in the Ferroelastic-Martensitic System Ti(50–x)Ni(50+x), Phys. Rev. Lett., 2005, 95, p 205702.10.1103/PhysRevLett.95.205702 ↗
30. J. Romanò, F. Lazzari, L. Garavaglia, and S. Pittaccio, Short Duration Heat Treatments before Aging Increase Mechanical Hysteresis of Pseudoelastic NiTi Alloy, J. Mater. Eng. Perform., 2022, 31, p 5478–5484.10.1007/s11665-022-06634-6 ↗
31. X. Zhao, X. Yan, Y. Yang, and H. Xu, Wide Hysteresis NiTi(Nb) Shape Memory Alloys with Low Nb Content (4.5 at.%), Mater. Sci. Eng. A, 2006, 438, p 575–578.10.1016/j.msea.2006.03.110 ↗
32. Y.X. Tong, F. Chen, B. Guo, B. Tian, L. Li, Y.F. Zheng, D.V. Gunderov, and R.Z. Valiev, Superelasticity and its Stability of an Ultrafine-Grained Ti49.2Ni50.8 Shape Memory Alloy Processed by Equal Channel Angular Pressing, Mater. Sci. Eng. A, 2013, 587, p 61–64.10.1016/j.msea.2013.08.049 ↗
33. O. Tyc, L. Heller, M. Vronka, and P. Šittner, Effect of Temperature on Fatigue of Superelastic NiTi Wires, Int. J. Fatigue, 2020, 134, p 105470.10.1016/j.ijfatigue.2020.105470 ↗
34. S. Liu, Y. Lin, G. Wang, and X. Wang, Effect of Varisized Ni4Ti3 Precipitate on the Phase Transformation Behavior and Functional Stability of Ti-50.8 at.% Ni Alloys, Mater. Charact., 2021, 172, p 110832.10.1016/j.matchar.2020.110832 ↗
35. N. Zotov, M. Pfund, E. Polatidis, A.F. Mark, and E.J. Mittemeijer, Change of Transformation Mechanism During Pseudoelastic Cycling of NiTi Shape Memory Alloys, Mater. Sci. Eng. A, 2017, 682, p 178–191.10.1016/j.msea.2016.11.052 ↗
36. M. Yawny and G. Eggeler, Pseudoelastic Cycling of Ultra-Fine-Grained NiTi Shape-Memory Wires, Z. fur Metall., 2005, 96, p 608–618.10.3139/146.101078 ↗
37. J. Olbricht, A. Yawny, A.M. Condó, F.C. Lovey, and G. Eggeler, The Influence of Temperature on the Evolution of Functional Properties During Pseudoelastic Cycling of Ultra Fine Grained NiTi, Mater. Sci. Eng. A, 2008, 481, p 142–145.10.1016/j.msea.2007.01.182 ↗
38. T. Waitz, T. Antretter, F.D. Fischer, N.K. Simha, and H.P. Karnthaler, Size Effects on the Martensitic Phase Transformation of NiTi Nanograins, J. Mech. Phys. Solids, 2007, 55, p 419–444.10.1016/j.jmps.2006.06.006 ↗
39. P. Wollants, J.R. Roos, and L. Delaey, Thermally- and Stress-Induced Thermoelastic Martensitic Transformations in the Reference Frame of Equilibrium Thermodynamics, Prog. Mater. Sci., 1993, 37, p 227–288.10.1016/0079-6425(93)90005-6 ↗